Simrad AP70 Quick Start Manual

 TURN MENU CMD STBY AUTO NAV WORK ALARM ALARM 13 1 3 2 4 5 6 7 12 10 8 11 9 No. Description 1 CMD/Thruster. Press once to take/request command. Press and hold to activate/ deactivate available thrusters 2 MENU. Press once to display the active steering mode’s quick menu. Press twice to display the Settings menu 3 PWR/Light. Press to display the Light dialog. Press and hold to turn the unit ON/ OFF 4 Course knob. In menus; turn to select menu item and adjust value, press to confirm. In FU mode; turn to set rudder angle. In STBY and NFU mode; press to go to FU mode. In AUTO and NoDrift mode; turn to change set heading/set course, press to capture present heading. In NAV/TRACK mode, turn to set track offset 5 PORT. In menus; press to return to previous menu level. In STBY and FU modes; press to go to NFU mode. In AUTO and NoDrift modes; press to change set heading/set course to port 6 STBD. In menus; press to confirm menu selection/enter next menu level. In STBY and FU modes; press to go to NFU steering. In AUTO and NoDrift modes; press to change set heading/set course to starboard 7 TURN. Press to display the Turn dialog 8 STBY. Press to switch the autopilot to Standby mode 9 AUTO. Press to activate Auto or NoDrift mode 10 NAV/TRACK. Press to activate NAV/TRACK (AP80) steering modes 11 WORK. Press to display the Work profile dialog 12 ALARM. Press to display the Alarm dialog (AP80 only) 13 USB connector (AP80 only) EN

Mode indication Work profile Rudder command Rudder bar Icon Description Black icon if one or more thrusters are installed and in use. Shaded if the trusters are unavailable for steering Active alarm message. Red icon for alarms, yellow for warnings Control unit locked Screen alive indication - white and black “balls” fade-swap color The power key •� Press and hold: Turn unit on/off •� Single press: Display light dialog •� Repeated presses: Toggle preset brightness levels ¼ Note: If the key is held after the display is turned off, a Power failure alarm will be activated. Press any other key on the unit to silence the alarm. Command transfer and unit lock CMD CMD Take command Lock other units

FU mode No action Switch to FU mode Give rudder command FU Press course knob in STBY or NFU mode Set rudder angle No action Switch to NFU mode AUTO AUTO Change set heading Capture present heading Change set heading NoDrift AUTO Change set course Capture present course Change set course NAV/ TRACK NAV TRACK Set track offset No action No action

Automatic and manual selection List of active alarms Manual setting (Speed) See Settings menu Quick menu, automatic and navigation modes Manual setting (Rudder, Counter Rudder, Speed and Track response*) * NAV/TRACK mode only See Settings menu Select menu item, Adjust value Return to prev. level, Remove menu Confirm selection or  MENU 1* Show Quick menu 2* Show Settings menu

alarm icon will remain active, and the alarm will be included in the alarm listing Mute Mutes the siren locally. The alarm dialog remains on the display 988-10196-002, 1/5