Smarty BX3000 Operation & User’s Manual

� Before using the Drive Recorder, please ensure that you read and understand this USER GUIDE. � Please store the USER GUIDE in an easily accessible location. � Before connecting and installing this Drive Recorder please 4 Edition � Before connecting and installing this Drive Recorder, please refer to the appropriate instruction manual for proper operation.

This equipment has been tested and found to comply with the limits for a Class This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: -Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. WARNING Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. �

DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Please make sure you follow the safety advice/instructions given in the user guide. Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery for RTC(Real Time Clock) inside Caution Damages due to production malfunction, loss of data, or other damages occurring while Caution Install the product where it does not block driver’s visibility and where there is no airbag installed. This could cause an accident or might injure the passengers in case of accident. Battery for RTC(Real Time Clock) inside using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the shock when the impact is light and as a result it may not begin recording automatically. Caution When the impact is light like very light, such as a minor bump in the road, the G-sensor may not recognize the impact and as a result it may not begin recording automatically Test and set your own G sensor level for your vehicle WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 4 recording automatically. Test and set your own G-sensor level for your vehicle.

to improve GPS reception. p p 2. The temperature range for optimum operation of the GP S receiver in your car is -10 ~ 50�C. The commercial purpose GPS has the average rage error of more than 15 meters and the range error could be more than 100 meters due to environmental conditions like buildings, roadside trees etc. 3. When using the product for the first time or after a long period (more than three days), it may take a little longer to recognize your current location. It may take between five and thirty minutes to get GPS reception. GPS reception may be impaired under the following circumstances. 1) If there is an object at the end of the GPS antenna 2) If your vehicle has metallic elements on the windshields 3) If equipment generating electromagnetic waves that interfere with the GPS signal is installed in the vehicle e.g.: Other GPS devices such as a certain t f i l ti t d l MP3 d CD l d l type of wireless activated alarms, MP3 and CD players and camera alarms using GPS. 4) If you are using a receiver connected by cable, electric interference can be avoided by simply changing the location of the receiver (antenna). 5) On heavily overcast or cloudy days, if the vehicle is in a covered location such as under a bridge or raised roadway, in a tunnel, an underground roadway or parking area inside a building or surrounded by high-rise roadway or parking area, inside a building or surrounded by high-rise buildings. 6) If GPS signal reception is poor, it may take longer to locate your current position when the vehicle is moving than when it is stationary. 5

You should have a set of the following items for each BX3000 order. y 2. 4GB SD memory card (The PC Viewer software is in the provided SD card ) in the provided SD card.) 3. GPS Antenna module 4. Remote Controller 5. Audio/Video output cable 6. Power Cable 8. Wire Splice clip (5pcs) 7. Camera input cable � 9. Sticker (double sided tape 1pc) 10. Velcro Sticker (1pc)

BUZZER Internal Microphone Remote Control Input GPS Input Power Input & � Camera 1, 2 Input GPS Input & Alarm (Car Signal) Input (Turn left, Turn right, Brake, Speed pulse) Rear View Camera Input

Audio out 1 � Video out 1 Video out 2 [Note] The same screen will be shown through the Video out 1 & 2.

Red(+) Black (Ground) Yellow (Alarm3) FUSE 250V 3A BLUE (Alarm1) White (Speed pulse) Green (Alarm2) ( ) �

Turn on the vehicle power BX3000 will be automatically started (Use the Turn on the vehicle power, BX3000 will be automatically started. (Use the power cable provided.) Event record The Event recording will be started automatically by Alarm1 to 3 or by the G- Notice : The unit will not start recording immediately after the power is turned on. It takes around 1 minute for the built-in power backup system to charge. Thereafter, the internal flash memory will be ready to record. The Event recording will be started automatically by Alarm1 to 3 or by the G sensor level. The Panic recording can be started by pressing the [PANIC] button. Normal record (Continuous record) The Normal(continuous) recording will be automatically started after power on. BX3000 will not make a separate event file during the continuous recording. It will mark the Event area as ‘Alarm1~3’, G-senor or [PANIC] button in the continuous recording file which can be easily searched for during playback continuous recording file, which can be easily searched for during playback. Dual record (Event & Normal record) If you set different record modes per camera, like camera1 set as Event record and camera2 set as Normal record, then camera1(Event record) will work according to the record setting for example 10frames per second recording. However camera2(Normal record)will record 1frame per second, if there is no event. If there is an Event, both cameras will record according to the record Live screen on Monitor BX3000 will display the live screen on the monitor. The camera channel can be changed using the information OSD. (Refer to page 13) Playback in the car setting for example 10 frames per second recording. �� Recorded files can be played back in the car. PC Viewer Software The software is pre-loaded on the SD card [pcsw] folder.

Remove the power first. Press and hold the [PLAYBACK] & [PANIC] button. �������������������� Then connect the power. Press and hold the [PLAYBACK] & [PANIC] more than 2seconds after booting. Then SD card initialization will start. Once complete, all video & log files will be deleted and the configurations will default to the factory settings. Notice : PC Viewer software is pre-loaded on the SD card. Please ensure you have installed the software to your PC before you format the card. Built-in power backup (Super Capacitor) When power to the unit is interrupted, BX3000 creates the last file using the internal Super Capacitor. BLUE LED (RECORD) The blue LED shows the power is on. The blue LED blink during event recording. RED LED (Overwriting) The red LED will be turned on when start overwriting. Buzzer “Beep” sound will occur when event/panic recording starts (this can be turned off In the setting menu on the PC viewer, if required). This also signals any system error This also signals any system error. VIDEO LOSS (warning) “Beep” sound will occur continuously when video loss. Check the camera and camera connection and turn off and on the unit to solve it. And make sure the number of cameras that you connect before turn on the unit. The number of cameras can be set in the settings menu on the PC viewer. ��

power power. 2. Blue LED & Red LED will turn on and slowly blinking simultaneously and then Blue LED will remain on. Blue LED light means BX3000 is now ready for the event recording and is started the Normal recording (Continuous recording). 3. The normal recording (Continuous recording) will be automatically started, if it set with your PC. y 4. The event recording will automatically begin when triggered by Alarm1 to 3 or by the G-sensor and will begin with one short “Beep” sound. 5. The panic recording can be started by pressing the [PANIC] button. Removing the SD memory card Turn off the power and then check the BLUE LED light. Once the BLUE LED light is off, take out the SD memory card. Inserting the SD memory card System Error Buzzer Turn off the power and then check the BLUE LED light. Once the BLUE LED light is off, insert the SD memory card. System Error Buzzer A “Beep” “Beep” sound will occur and the BLUE & RED LED light will blink simultaneously when there is a system error or SD card is not inserted. [Check the SD memory card when this occurs. To solve the problem, initialize the SD card or replace the SD card] ��

INFORMATION OSD Press [PLAY] button then the INFORMATION OSD (the summery of setting) will show up on the monitor as below, CAM1 CAM2 CAM3 Activated Record�Mode Continue Continue Event � � � System�:�NTSC Quality�:�Super Overwrite�:�ON G�Sensor�Level�:�X:3,�Y:3,�Z:3 G�Sensor�Calibration�: Firmware Version : BX3000 1.2.0 Resolution�:�720X480 FPS�:�10 Audio�:�ON � To change the live display channel, press [PANIC] button. The INFORMATION OSD will be turned off automatically after 30 seconds. To turn off the live view, press [PLAY] button or [SHUTTER] button. Firmware�Version�:�BX3000�1.2.0 Current�Time�:�07:50:07��11�APR�2010 LIVE VIEW Turn on the BX3000 and press [PLAY] button to turn on the INFORMATION OSD (the summery of setting) . To change the live display channel, press [PANIC] button to select the camera. And then press [PLAY] or [SHUTTER] button to escape. ��

G Sensor Calibration is needed after installing the BX3000. It detects the installed direction of the BX3000 for it to accurately record the journey direction. Press and hold [PANIC] & [SHUTTER] button together and then power on. G-Sensor Calibration screen will be displayed. Press�and�hold�panic�and�shutter�button� simultaneously�more�than�2�sec�for�calibration Press any single button to escape Press�any�single�button�to�escape Park�vehicle�on�a�flat�surface�with� at�least�5�meters�of�space�directly�ahead� and�press�panic�button�once Move�vehicle�directly�forward�5�meters�and�stop Retry G�Sensor�Calibration�is�finished�successfully Press�any�button�or�wait�30�seconds�to�reboot G�Sensor�Calibration�is�failed Park�vehicle�on�a�flat�surface�with �� This G-Sensor calibration is only needed at the first time the BX3000 is used. At�least�5�meters�of�space�directly�ahead And�press�panic�button�once�again

The panic recording by [PANIC] button will start by pressing the [PANIC] button The panic recording by [PANIC] button will start by pressing the [PANIC] button with one short “Beep” sound. Blue LED will be blinking during the panic recording. BX3000 doesn’t make a separate panic file during the continuous recording. It will mark the panic area by [PANIC] button in the continuous recording file which can be easily searched for during playback. SNAPSHOT RECORD BY SHUTTER BUTTON SNAPSHOT RECORD BY SHUTTER BUTTON Press [SHUTTER] button. Then BX3000 will take a snapshot of 1 image with 5seconds audio with one short “Beep” sound. ��

Press and hold [PLAY] button for more than 2seconds. The latest recorded file will playback on the screen. [WARNING] Recording cannot be done during playback. Explanation of PLAYBACK control button Channel change: Press [PANIC] button Channel change: Press [PANIC] button. Move to the previous file: Press and hold [SHUTTER] & [PLAY] button. Move to the next file: Press and hold [PANIC] & [PLAY] button. PLAY/PAUSE: Press [PLAY] button. SLOW PLAY: Press [PLAY] button more than 1seconds. Return to record mode: Press and hold [SHUTTER] button more than 2seconds. ��

BX3000 PC Viewer Guide [PC SYSTEM REQUIREMENT] OS Windows 2000, Windows XP Recommended PC specifications for PC Viewer software Windows Vista, Windows 7 CPU Pentium4 2.6GHz or higher RAM 512MB or higher Interface SD Memory Card Reader HDD Free space Install 20MB or higher Backup 2GB or higher 17 If the PC does not meet the minimum system requirement, the PC Viewer may not function properly. p p g Display 1,024 x 768 pixel/High Color(16bit) or higher

PC Viewer software is in the provided SD card. 1. Connect the SD card into your PC (if your computer does not have SD card slot use the USB SD card reader) and open the “My Computer” 2. Right-click the “DRIVEREC3” drive and select [Open] 3. Double click [SETUP.EXE] in the [pcsw] folder. 4. Select the language and then follow the dialog box. 5. The “PCViewer” icon will be displayed on your desktop. NOTE: To Un-install the “PC Viewer BX3000” Open the “Control Panel” Open the Control Panel Select [remove program] and remove [PC Viewer BX3000] 18

1. Connect SD memory card in to the SD card reader. 2. Run “PC Viewer BX3000” 3. Select [File] and then click “Select Data Folder” or Click [OPEN] button [OPEN] button 4 Select SD memory card folder at the folder select window 4. Select SD memory card folder at the folder select window. 19

To set PC Viewer select [File] and then click” PC Viewer Setting” This setting is for the PC Viewer software itself. To set the recorder, refer to page 27. The ‘date’ formats and ‘speed’ unit will be set automatically according to the PC Windows setting. However it can be changed with this PC viewer setting menu. To see the better quality playback pictures on your PC, check [Deblocking] box. 20

And then click [Load] button. Check the file [Load] Button [All] Button The Event file list recorded by a triggered G-sensor or Alarm1~3. The Panic file list recorded by pressing the [PANIC] button. The Continuous record file list. All recordings and snapshot files will appear the file area under the tab: 21 The Snapshot file saved by pressing the [SHUTTER] button. The Log file list.

[NOR]: Normal Recording [G-Sensor]: Event Recording Playback position indicator Event data search button is enabled when playing back Normal recorded files. The Yellow mark indicates there is an Event triggered by the G-sensor, Alarm1~3 or the [PANIC] button. The ‘icon name’ can be changed in the setting menu. Eg: 22 G-Sensor Data UD: Up/Down direction FR: Front/Rear direction LR: Left/Right direction GPS location information(the north latitude, the east longitude)

PLAYBACK Date & Time CH1 CH2 CH3 Volume Drag & Move the white line to move the playback position. Playback buttons Sing View (CH1, CH2, CH3) Quad View Pause Next Image Previous Image X0.5, 1 Play X2, 4, 8, 16 Fast Forward X0.5, 1 Reverse X2, 4, 8, 16 Fast Reverse 4x4 Multi View (Thumb-nail function) Zoom In G-sensor graph Zoom Out G-sensor graph Reset Zoom 23

Function PC keyboard hot buttons 1024x768 mode Enter Return to the previous mode: Enter Full screen mode Alt + Enter Return to the previous mode: Enter Playback speed control Ctrl + F Playback speed control Ctrl + F 0.5 => 1 Reverse playback speed control Ctrl + B 0.5 => 1 Pause / Play Space Previous Image � direction button. Next Image � direction button 24

corner of the software. Google map (Event Recording File) To see the route & position on the Google map, the GPS data should be recorded with video. To see the map, the PC should be d connected to the Internet. The playback position will be shown on the map with an arrow. The blue markings show the route taken. Zoom Out Double click the blue mark to change the video playback position to that point. The camera icon indicates that there is a recorded file. a recorded file. The total camera icons shown will be less than 100, even if there are more than 100 events. When the unit is set to 25 Normal recording mode, there is no route & camera icon on the map.

Thumb-nail Function Click the thumb-nail image to change the playback position. g g p y p Click right button of mouse to go back to single/Quad image playback mode. 8. Click [Close] button to quit the event playback. Cli k [Cl ] t fi i h Click [Close] to finish the event playback. Then the [PlayList] window will be changed to the initial status. 26

Pause the playback and click ‘Save Image’ icon to make a JPG file. ‘S I ’ i ‘Save Image’ icon Pause the playback and Click ‘Save AVI’ icon to make a AVI file. ‘Save AVI’ icon 27

Print image icon Input [Print Title] & [Print Comment] using Keyboard. Total Print Comment window allows up to 7 lines total. 28

[Print Title] & [Print Comment] & G-sensor graph & map will be printed on the first page first page. Click [ 2x2 ] and then click [Print] to print 4 images in one page. 29 To print CH1~3 together select 1frame only.

[Backup] icon Check & Load [Event], [Normal], [Panic] [Log] & [Memo] data first, before clicking the [Backup] icon. The selected files will appear in the lists in the Backup windows. OR Check [Backup All] and press [Start] button to backup all files Check [Backup All] and press [Start] button to backup all files. 30

14. Click [Setting Drive Recorder] icon for setup. [Setting Drive Recorder] icon [Setting Drive Recorder] icon Caution Backup SD card data first, before clicking initialize SD card button OR before changing the Record Mode from Normal Mode to Event Mode or vice versa. All normal recording data or all event recording data in SD card will be automatically deleted to make a free space on the SD card. Once 31 Initialize SD card : All data will be deleted and set the configuration of Drive Recorder will default to the factory settings. Record Mode Change: All normal recording data or all event recording data in SD card will be automatically deleted to make a free space at SD. y p done, the old data cannot be recovered.

If you want to use CH2 or CH3 h k thi b Record Mode Normal Mode: Continuous recording will automatically start after booting the BX3000. Event Mode: Recording by G sensor Alarm1~3 or CH3 check this box. Event Mode: Recording by G-sensor, Alarm1~3 or [PANIC] button. Max Number of Resolution D1(720x480), Half-D1(720x240) Frame Rate 1 Camera supports 1~30 fps 2 Cameras supports 1~15 fps @ D1 Max Number of Panic button Record should be 5~500. 2 Cameras supports 1~30 fps @ Half-D1 3 Cameras supports 1~10 fps @ D1 2 Cameras supports 1~15 fps @ Half-D1 Quality High (Large file size, but good picture quality) Low (Small file size, but low picture quality) Pre Event P t E t Pre-record/Post-record time can be set here. P t d ti h ld b 5 300 32 Post Event Post-record time should be 5~300sec Overwrite Overwrite (The image data is overwrites the oldest files when the SD memory is full.) One time (The recording stops automatically when the SD memory is full.)

To record the car signal with video, set the Alarm configuration as below, To use the Alarm as an Event trigger, (i.e: so Event recording will start when a door is open or Meter is on) set the Alarm configuration as below, G-Sensor setting If G-sensor sensitivity value is too high like 1 it becomes too sensitive so it will If G sensor sensitivity value is too high like 1, it becomes too sensitive, so it will detect even a light impact or light turn. If G-sensor sensitivity value is too dull, so it might no detect a notable incident. So, sensitivity should be set in consideration of a vehicle’s suspension, condition and also the road condition. If you don’t want to record an Event triggered by G-sensor, un-check Event Record box. 33

Vehicle ID Type in your Vehicle ID Password Enter 4 numbers from 1000 to 9999 as a password Password Enter 4 numbers from 1000 to 9999 as a password [Search on system] function (Playback on a car) will not work after set the password. Buzzer “Beep” sound ON/OFF when Event recording starts Video Type This should be set by Camera Video type. Search on system To use the playback function on the recorder. To record the exact time, this time zone setting is important. Once you set the time zone, automatically synchronize time using GPS time. However Manual time setting is also available. 34 Initialize SD card : All date will be deleted and set the configuration of Drive Recorder will default to the factory settings. Delete Record Data : All date will be deleted.

Caution Once the record setting was changed, all recorded data in SD card will be removed automatically data in SD card will be removed automatically. NEW SD Memory card initializing should be done using Tool menu. Select Backup [YES] or [NO] before lost the all recorded data. STEP1. Insert new SD memory card into the PC. STEP2. Run “PC Viewer BX3000” STEP3. Select [Tool] and then click [SD Initialize] We recommend the [SD initialize] at least once per month to prevent the BX3000 from any software errors from any software errors. 35

16. Select [LOG] tab windows and then check the log from the log list using mouse or click [Check All] button. Then click [Load] button. Log data Log data will be recorded during driving even if there are no events. The total log data size can not exceed 48MB. The unit overwrites the oldest data when 48MB is reached. Using this log data, we can use the data sorting function to help find specific data (for example, to find all the times when the vehicle was travelling at more than 80mph(or 80km). Search button Input sorting data G-sensor graph GPS speed, G sensor X value, G sensor Y value, G sensor Z value data can be used to narrow a search for journey information. The small check box at right side of each value should be ticked before the data for search is inputted If any recorded video data matches the search query a list will inputted. If any recorded video data matches the search query, a list will show up with [Switch] or [G Sensor] indicators to show how the recording was triggered. G sensor X value: Front/Back movement (like a harsh brake or quick start) G sensor Y value: Left/Right movement (like a harsh turn) G sensor Z value: Up/Down movement (like a bump or depression) 37

To see the whole route on Google Earth, select the log file and click Google Earth button. (BX1000 Plus only) STEP1. Install the Google Earth on your PC. (http://earth.google.com/ ) STEP2. Check the log file STEP3. Click Google Earth at Tool menu We recommend to use Google Earth Version 5.0 or above. Tip: Click [Car Track] and then Click [Play Tour] button to play the recorded journey in Google E th 38 Earth.

Note: This is a guideline only. Actual results may very depending on a variety of factors (Video signal, image, etc.) 39

Note: This is a guideline only. Actual results may very depending on a variety of factors (Video signal, image, etc.) 40

Buzzer / LED specification Event 1 1 sec - SHUTTER(Snap shot) 1 200 msec - Press button and then changed mode 1 200 msec - SD card fail continuously Stop by pressing [PANIC] button 500 msec 500 msec SD card full at [One time] record mode continuously 2 sec 2 sec record mode y Status Blue LED Red LED Power on ON ON Booting ON/OFF ON/OFF Pre Event recording * LED specification Before Overwriting Pre Event recording Continuous recording ON OFF Event recording ON/OFF Quickly OFF Event recording during continuous recording mode. (5seconds) ON/OFF Quickly OFF SHUTTER recording ON/OFF Quickly OFF Pre Event recording ON ON During Overwriting g Continuous recording ON ON Event recording ON/OFF Quickly ON Event recording during continuous recording mode. (5seconds) ON/OFF Quickly ON SHUTTER recording ON/OFF Quickly ON One Time record mode (When SD card full) OFF ON/OFF S One Time record mode (When SD card full) OFF Slowly During Playback OSD menu ON/OFF ON/OFF SD Card fail ON/OFF Slowly ON/OFF Slowly 41

Video In CH3- camera in Audio In 1CH (Internal / External Microphone) AV Out 1 Video out, 1 Audio out Continuous record Event record NTSC: 720x480 (30fps) 720x240 (60fps) PAL: 720x576 (25fps) 720x288 (50fps) Recording time 2hours ~ 356hours (14days 20hours) Shutter record Still Image + Audio (5 sec) Main memory 4GB SDHC (support 32GB SDHC) GPS External GPS Module G S I t l 3 i G S G Sensor Internal 3-axis G-Sensor RTC Internal battery Car Signal Brake, Left Turn, Right Turn, Speed Pulse Alarm Input 3 (Door, Meter, etc.) C i MPEG4 (Continues recording) Compression MPEG4 (Continues recording) MJPEG (Event recording) Remote controller PANIC button, PLAYBACK button, SHUTTER button LED 2 (Red/Blue) Analysis Software PC Viewer (support Google Earth) 42 Super Capacitor Enable recording last file and shut down Power consumption 7.8W (when recording 3cameras) Size/Weight 70mm X 99 mm X 21mm, 100g,

TECHNICAL SUPPORT For Technical Support, please contact your local distributor. pp , p y LIMITED WARRANTY This product is supplied with 1 year warranty. The Warranty excludes products That have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase. 43

1/4" CMOS Digital Sensor 310K pixels Angle of View: 170� [horizontal(131�) vertical (96 �)] Optional Item Effective Pixel: 648 (H) x 488 (V) (NTSC/PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 1 lux Operating Temperature: -20�C ~ 60�C Input Voltage: 5V, Power consumption: 0.5W 30mm x 35mm x25mm, 50g, Wire : L=5000�10mm STR-100 DC 5V, CCD camera for BX3000 1/3" Sony Super HAD CCD� Angle of View: 90� Effective Pixel: 510(H) X 492(V) (NTSC), 500(H) X 582(V) (PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 0.1 lux Operating Temperature: -20�C ~ 60�C Input Voltage: 5V, Power consumption: Max 200mA 43mm x 38mm x 35mm, 70g, Wire : L=5000�10mm STR-100IR DC 5V, CCD camera for BX3000 1/3" Sony Super HAD CCD� Angle of View: 145� Eff ti Pi l 510(H) X 492(V) (NTSC) 500(H) X 582(V) (PAL) Effective Pixel: 510(H) X 492(V) (NTSC), 500(H) X 582(V) (PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: IR LED On 0 lux Operating Temperature: -20�C ~ 60�C Input Voltage: 5V, Power consumption: Max. 320mA(LED ON) 43mm x 38mm x 35mm, 70g, Wire : L=5000�10mm MIC-100 External Microphone for BX3000 Directivity : Uni-directional Sensitivity : -36�5dB(finished product) At 3V 2 2Kohm 0dB=1V/Pa 1KHz At 3V, 2.2Kohm, 0dB=1V/Pa 1KHz Impedance : 2.2K Ohm@1KHz Max. Operating voltage : 10V Stand Operating voltage : 3V Frequency : 100~10,000Hz Current Consumption : 0.5mA Max. Operating Temperature: -40�C ~ 85�C Dimension : �9.7 x 5.0mm Plug: �3.5mm, mono straight shape, Wire : L=2600�10mm SH-100 Steel Housing for BX3000 Dimension : 155.00 x 130.00 x 24.00 mm, 330g 44

NRV-001P CCD Rear View Camera, Waterproof (IP 67) 1/4" Sony Super HAD CCD Angle of View: 154� Angle of View: 154 Effective Pixel: (H)510�(V)492 (NTSC) (H)500�(V)582 (PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 0.5 lux Operating Temperature: -20�C ~ 60�C Input Voltage: DC 12V (DC 8~16V) Power consumption: 110mA �18.6 x 22.4 mm Include 8m extension cable CCD Rear View Camera, Waterproof (IP 67) NRV-001M , p ( ) 1/4" Sony Super HAD CCD Angle of View: 154� Effective Pixel: 510(H) X 492(V) (NTSC), 500(H) X 582(V) (PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 0.5 lux Operating Temperature: -20�C ~ 60�C Input Voltage: DC 12V (DC 8~16V) Power consumption: 110mA 25.12 x 29.14 x 27.01 mm Include 8m extension cable STR-132A CMOS Rear View Camera, Waterproof (IP 67) 1/4" Hi Resolution CMOS Angle of View: 163� Effective Pixel: (H)648�(V)488 (NTSC / PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 0.05 lux Operating Temperature: -20�C ~ 70�C Input Voltage: DC 7~48V P i M 45 A Power consumption: Max. 45mA 29.00 x 33.10 x32.80 mm, 80g Include 8m extension cable STR-132B CMOS Rear View Camera, Waterproof (IP 67) 1/4" Hi Resolution CMOS Angle of View: 163� Effective Pixel: (H)648�(V)488 (NTSC / PAL) Video out: 1.0 Vp-p (Composite) Min. Illumination: 0.05 lux Operating Temperature: 20�C 70�C 45 Operating Temperature: -20 C ~ 70 C Input Voltage: DC 7~48V Power consumption: Max. 45mA 29.00 x 33.10 x32.80 mm, 80g Include 8m extension cable

Model�name:�DPWR�300� The�safe�power�supply�cable�will�allow�you�to�hard�wire�the� � Recorder�Power�IN � Ground Drive�Recorder�series�to�the�fuse�box�of�your�vehicle. � Fuse�box�(+) ������ �������� �������� Fuse:�250V�2A The�safe�power�supply�cable�will�automatically�cut� off�the�battery�power�when�battery�voltage� dropped below 12V or 24V. Connect (+) to the fuse box dropped�below�12V�or�24V. 46 Connect�(+)�to�the�fuse�box. It�should�be�connected�to�an�battery�circuit. The�ground�cable�should�be�connected�to�car�chassis.