Snell IW-K7 Owner's Manual

A home theatre system includes three loudspeakers placed across the front of the listening room. The distance between the left and right speakers determines the width of the stereo image. If the speakers are placed too close together, the image will be too narrow; too far apart and the blend will suffer, creating a hole in the middle. When properly placed, your speakers will create a continuous “virtual image” from left to right, with an illusion of sound outside, in front of, and behind the speaker systems. We recommend an angular separation betwe ...

The new Snell IW series units bring a novel approach to the design and construction of in-wall loudspeakers, expanding the boundaries of in-wall performance. Our primary goal was to develop loudspeakers that delivered performance that was as close as possible to that of our highly regarded freestanding loudspeakers, like the K7 and LCR7. To do this several issues had to be addressed. The bass performance of conventional loudspeakers mounted in wall cavities is very unpredict- able. Cavity volume can be large, which should be good for bass performance ...

hand and power tools, knowledge of local building and fire codes, and a familiarity with the environment behind the wall or ceiling in which the speakers will be installed. Optional preconstruction brackets are available for each model. paIntIng the SpeaKeRS If you intend to paint the speakers, it is best to do so before installation. 1) Remove the speaker grille. 2) Mask the baffle. 3) After painting, carefully remove the paint mask. Note: Custom paint and grilles are availabl ...

50–250W 4 ohms 89dB SPL 1” SEAS silk dome, ferrofluid cooling 2 - 51/4-inch (132mm) treated paper cone with butyl rubber surround, 5mm excursion 2kHz Specialty adhesive between two 1/4” layers of HD fiberboard Perforated metal, 53% open 231/4 x 131/4 x 33/4 inches (590 x 336 x 95mm) 22 x 12 inches (559 x 305mm) White trim, suitable for painting 19 lbs (8.6kg) / each IW-D7 62 Hz-20 kHz 50–250W 4 ohms 90dB SPL 1” SEAS silk dome, ferrofluid cooling 2- 61/2-inch (165mm) copolymer with butyl rubber surround, 5mm excursion 2kHz Specialty adhesive between two 1/4” ...

defect in materials or workmanship that occurs in normal use of the speaker system, without charge for parts and labor. Your responsibilities are to use the product according to the instructions supplied, to provide safe and secure transportation to an authorized Snell Acoustics service representative, and to present proof of purchase from an authorized Snell dealer in the form of your sales slip when requesting service. Excluded from this warranty is damage that results from ab ...