Hendi 225035 Operation & User’s Manual
Text of the manual
DIGITAL CONVECTION OVEN
WITH STEAM INJECTION
PIEC KONWEKCYJNY
Z NAWILŻANIEM
4X 429X345 MM
You should read this user manual carefully before
using the appliance
Przed uruchomieniem urządzenia należy koniecznie
dokładnie przeczytać niniejszą instrukcję obsługi
User manual
Instrukcja obsługi
1. Technical service ............................................................................. 3
2. General warnings ............................................................................ 3
3. Technical specifi cations .................................................................. 3
4. Instructions for the installer ...................
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the
appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very
carefully.
1. Technical service
A technical check-up once or twice a year helps pro-
long the life of the appliance and guarantees
4. Instructions for the installer
The following instructions are aimed at the qualifi ed
installer, to ensure that he carries out the instal-
lation, adjustment and maintenance operations as
correctly as possible and according to current legal
regulations. Any operation must be performed with
electrical power cut to the appliance.
Before using the appl
Connection to water tank
(for ovens predisposed to water pump)
To replace electrovalve with water pump (in ovens with
optional predisposition to pump), follow the steps
below listed (image 1):
1. Remove back cover from oven.
2. Disconnect wiring cables from electrovalve.
3. Disconnect water tube (3) from electrovalve,
pressing e keeping pressed the edge
