Heta SCAN-LINE 10 Operating Instructions Manual
Text of the manual
Congratulations on your new stove. We
are sure that you will be happy with
your investment, especially if you follow
the advice and instructions we have put
together in these operating instructions.
The Scan-line 10/20/30 20B/30B have
been approved according to the EN
13240 / NS 3058.
Approval means that consumers can be
sure, that the stove meets a range
even when the damper is in its “closed”
position. If local regulations permit, two
contained fireplaces can be connected
to the same chimney. However, you must
abide by local regulations regarding the
distance between the two connections.
Wood-burning stoves must never be
connected to chimneys that are also
linked to a gasfired heater. An efficient
sto
Examples of fuel values of
different woods
Fuel type / number of cubic metres per
1,000 litres of oil
Oak
Beech
Ash
Birch
Elm
Common
spruce
7.0
7.0
7.2
8.0
8.9
10.4
Chimney fires
In the event of a chimney fire – which
often results from incorrect operation
or protracted firing with moist wood –
close the door and shut off the seconda-
ry/start-up a
and has been converted to glowing
embers.
Optimal firing
To achieve optimal firing and the hig-
hest possible effect, it is important to
make sure that the air supply is used cor-
rectly. As a general rule, the secondary
air is to be used to control the fire to ig-
nite the flue gases. This produces a high
effect and keeps the glass panel com-
pletely clea
