LaCie D2 Operation & User’s Manual

15 Manual access: Open the LACIE SETUP volume in Computer (My Computer for Windows XP) and double-click LaCie Setup. Mac users Open the LACIE SETUP volume on your desktop and then double-click LaCie Setup ...

26 UNMOUNTING YOUR HARD DRIVE USB, FireWire, Thunderbolt, and eSATA external devices feature “plug & play” connectivity, which means that your LaCie storage can be connected and disconnected while the computer is running. To prevent failures, however, it is important to follow these steps when disconnecting your device. WINDOWS XP USERS From the System Tray (located in the lower right-hand side of your screen), click the Eject icon (a small green arrow over a hardware image). A message will appear, listing the devices the Eject icon controls (it should say, “Safely ...

30 Windows Users Technical Note on volumes larger than 2TB: Windows XP 32-bit - This version of Windows will not recognize volumes larger than 2TB; Windows XP x64, Vista and 7 - All of these versions of Windows can recognize volumes greater than 2TB. However, disks must be converted to the GPT file system before partitions greater than 2TB can be created. To do this, go to Windows Disk Management and right-click on the disk. Select Convert to GPT. You may now create partitions greater than 2TB. Make sure the storage device is connected to and mounted on the computer. 1. ...

24 ECO TAB Windows Set the time that the LaCie d2 is inactive before entering Eco mode. Eco mode is also known as power-saving mode. See LED Power Button for further details on power-saving mode. ...

6 QUIET OPERATION AND HEAT MANAGEMENT To reduce noise during operation, the LaCie d2’s built-in stand features vibration-dampening rubber feet. Additionally, the LaCie d2’s metal casing dissipates heat from the drive, allowing for noiseless, fan-free cooling. Since LaCie's unique design draws heat away from the internal hard drive, the external casing will be warm to the touch after extended use. The LaCie d2’s specially constructed exterior can prolong the life of its hard drive via the fan-free cooling system. To protect the hard drive from external forces, the L ...

32 TROUBLESHOOTING TOPICS Note: Interactive troubleshooting, a highly effective way to resolve problems with your product, is available from www.lacie.com/support/. Select your product, then click the “Troubleshooting” tab. All Users Problem: My file transfers are too slow. Q: Is the hard drive connected via a USB 3.0 to a USB 2.0 port on your computer or hub? A: If your hard drive is connected to a USB 2.0 port or hub, this is normal. A SuperSpeed USB 3.0 device can only operate at USB 3.0 performance levels when it is connected directly to a USB 3.0 port or hub. Ot ...