Hunter M0046-01 Instructions Manual

Your Installation Ceiling Bracket Ladder PAG E 3 Tools Needed Wiring Canopy Maintenance & Cleaning Blades Troubleshooting Downrod Switch Housing Light Kit Preparation Table of Contents PAG E 11 PAG E 12 PAG E 4 Mounting Options PAG E 14 PAG E 16 ? ? ? PAG E 17 Congratulations on purchasing your new Hunter® ceiling fan! It will provide comfort and performance in your home or ofice for many years. This installation and operation manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. To register your fan, please visit: www.HunterFan.com/register Save your receipt for proof of purchase. 1 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualiied electrician. You may need a friend to help you. Check box to see fan weight Assess location 30 inches from blade tip to nearest wall or obstruction 7 feet from bottom edge of blade to the loor Select a downrod length w.1 - To reduce the risk of ire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box. w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. w.3 - To reduce the risk of ire, electrical shock, or motor damage, use only Hunter Solid State Speed Controls. w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualiied electrician. c.2 - Use only Hunter replacement parts. Assess ceiling angle Read and Save These Instructions This product conforms to UL Standard 507. WARNINGS CAUTIONS Must be able to secure the fan to building structure or fan-rated outlet box 1 2 3 Standard Downrod for ceilings 8-10 feet high Shorter Downrod for fans installed close to ceiling Longer Downrod for ceilings 10 feet or higher 2 Ceiling angles greater than 34° will require an Angled Mounting Kit. See page 4 for details.

(optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools. 3 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

If you have an angled ceiling: 1. You will need a longer downrod (sold separately). 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately). Guide Touches BOTH Ceiling & Wall S I T U A T I O N 1 Guide Touches Wall but NOT Ceiling S I T U A T I O N 2 You need BOTH a Longer Downrod & an Angled Mounting Kit You need ONLY a Longer Downrod *most common If you have a lat ceiling: Hang your fan by a standard downrod (included). Mounting Options Use Standard Mounting or Low-Proile Mounting to hang the fan from a lat ceiling. Use Angled Mounting to hang the fan from a vaulted or angled ceiling. 34 O CEILING WALL OPTION 1 Standard Mounting OPTION 2 Angled Mounting 2 3 SLIDE toward ceiling PLACE against wall 1 FOLD on dotted line 34° Use the three steps below to determine if your ceiling angle is greater than 34° Support Structure Ceiling Outlet Box (required) Angled Mounting Style Standard Mounting Style Support Structure Ceiling Outlet Box (required)

still attached. For angled ceilings, point opening toward peak. Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location. If you are unable to do this, call Technical Support at 1-888-830-1326. Use wood screws (included) when securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket with hardware found in the hardware bag. Use machine screws (provided with outlet box) when securing to existing ceiling fan-rated outlet box. Make sure it is securely installed and is acceptable for fan support of 31.8 kg (70 lbs) or less. Turn Power 5 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

Preparation 1.888.830.1326 www.HunterFan.com D I S C A R D K E E P ! Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation. Note: Some fans will have a shipping ring instead of shipping blocks. Please remove the ring and save the screws. Time Saver Tip: Get a helper to insert grommets, found in the hardware bag, into the blades while you’re doing the next couple of steps. 6 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold Separately Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to next page If you need a different downrod length follow these steps: Steps 1-5 to remove standard downrod pipe Steps 6-10 to reassemble with new pipe Included (pre-assembled)

KEEP! 8” 3/8” C U T & S T R I P (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the downrod. Downrod (continued) 8” 3/8” Tighten the setscrew with pliers. DO NOT HAND TIGHTEN. If the setscrew is not tightened securely, the fan may fall. K E E P !

CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket. Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. 9 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

connector from the hardware bag, connect the 3 grounding wires (green, green/ yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket. (Grounding) Green/Yellow Stripe Green/Yellow Stripe White Black (Grounded) Note: To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. Using the orange wire connectors from the hardware bag, connect the black wire (ungrounded) from the ceiling to the black and the blue wires from the fan. Connect the white wire (grounded) from the ceiling to the white wire from the fan. Using the orange wire connectors from the hardware bag, connect the white wire (grounded) from the ceiling to the white wire from the fan. Connect the black wire (ungrounded) from the ceiling to the black wire from the fan. Connect the second (ungrounded) wire from the ceiling to the blue wire from the fan. F R O M F A N White (Ungrounded) Black Blue (Grounded) F R O M C E I L I N G (Ungrounded) Blue For Dual Switches For a Single Switch F R O M C E I L I N G F R O M C E I L I N G Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Refer to CAUTION c.1 on pg. 2 10 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company (Ungrounded)

the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy its into the hanging bracket as shown. Screw Holes Insert the two canopy screws found in the hardware bag. Note: Fan style may vary. 11 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

bag into the holes in the blades, then secure each blade to a blade iron with screws found in the hardware bag. Lightly attach the blade irons to the motor with the blade iron armature screws, then securely tighten after both screws are attached. Remember the screws that you kept after removing the shipping blocks (page 6)? You need them for this step. 12 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

hole of the upper switch housing, then wrap keyhole slots around the screws and twist counterclockwise. Screw two housing assembly screws from the hardware bag halfway into the motor housing. It does not matter which two screw holes you choose. Insert the third screw, found in the hardware bag, into place and then tighten all three screws. Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing ixture falling. 13 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

Light Kit Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all three assembly screws could result in the light ixture falling. Want to install your fan without a light kit? Go to www.HunterFan.com/FAQs and click “How do I install my fan without the light kit?” Lift the lower switch housing up until its screw holes are aligned with the screw holes in the upper switch housing. Install the three switch housing screws found in the hardware bag. Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on the connectors. Screw Holes

CONGRATULATIONS! YOU’RE DONE! See next page for fan operation instructions. Connect the appropriate pull chain pendant to each of the short chains coming from the inial and inial cap. The fan pull chain controls the speed: from high to off. The light pull chain controls the light ixture: on and off. Press the globe and globe keeper lush against the metal plate. Thread the light pull chain through the hole in the center of the inial cap and thread the fan pull chain through the hole in the side of the cap. Finally, thread only the light pull chain through the hole in the inial and screw the inial onto the threaded rod. Install a bulb into each of the sockets. When necessary, replace with bulbs of the same wattage. Light Pull Chain Fan Pull Chain Note: Globe style and number of lights may vary. Finial Finial Cap Globe Keeper Metal Plate Globe 15 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

ON Turn Power Changing the bulbs - unscrew the inial and remove it from the threaded rod. Remove the inial cap and unscrew the globe keeper while supporting the globe with your other hand. Carefully remove the globe. Unscrew bulbs and replace with bulbs of same type and wattage. Reinstall the globe assembly. Changing the direction of air low - move the reverse switch to the opposite position. Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the inishes. Reverse Switch For questions regarding removing a light kit, call customer service 1-888-830-1326. Finial Finial Cap Globe Keeper Metal Plate Globe 16 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company

blade iron screws until they are snug. • Turn the power off, support the fan carefully, and check that the hanger ball is properly seated. • Use the provided balancing kit and instructions to balance the fan. Noisy Operation • Tighten the blade and blade iron screws until they are snug. • Check to see if any of the blades are cracked. If so, replace all of the blades. Fan doesn’t work • Make sure power switch is on. • Pull the pull chain to make sure it is on. • Push the motor reversing switch irmly left or right to ensure that it is engaged. • Check the circuit breaker to ensure the power is turned on. • Make sure the blades spin freely. • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 10. • Check the plug connection in the switch housing. 17 M0046-01 • 10/01/15 • © 2012–2015 Hunter Fan Company