Funkwerk AUDIO 2010 Operating Manual

Maerkische Straße D - 15806 Dabendorf Phone: +49 3377 316 - 0 Fax: +49 3377 316 - 300 [email protected] www.fwd-online.de Rights to changes and deviations from the scope of delivery reserved as required by technical pro- gress! All rights reserved! Copies, also excerpt-related, only with written approval!

Audio 2010 Table of contents Notes on safety ................................................................................ 4 Functions of the Audio 2010 ........................................................... 5 Functional overview ........................................................................... 5 Symbols ............................................................................................ 6 Key functions ..................................................................................... 6 Symbole der Statusleiste ................................................................... 8 Speller symbols .................................................................................. 8 Menu item symbols ........................................................................... 8 Speller ................................................................................................ 9 Operational startup .......................................................................... 9 Bluetooth® technology ..................................................................... 10 Switching on / Switching off ............................................................ 10 Entering PIN Bluetooth® .................................................................. 10 Handsfree mode (handsfree profile) ................................................ 11 Automatic connecting ...................................................................... 11 Calling ............................................................................................... 11 The menus ....................................................................................... 13 Voice control .................................................................................. 24 Language .......................................................................................... 24 Activation and sequence .................................................................. 25 Service ............................................................................................. 28 FAQ - Frequently Asked Questions .............................................. 29 Software updating ......................................................................... 31 Hotline ............................................................................................. 31

Notes on safety IMPAIRMENT OF TRAFFIC SAFETY! Inattention can lead to dangerous traffic situations. Also in the handsfree mode, you must always pay attention to the traffic situa- tion. The telephone may be used by the driver during driving in handsfree mode only! Dispense with a telephone call in difficult situations, as appropriate! NOTE: Dependent on the software, it can be that individual functions are not yet available! Please note the information about this at www.fwd-online.de.

Audio 2010 Functions of the Audio 2010 Functional overview • Call functions ➯ Incoming call ➯ Outgoing call ➯ Automatic redialing • Status indicator ➯ Rechargeable battery status of the mobile telephone ➯ Network status indicator ➯ New SMS ➯ Call in absence ➯ User icon with initials ➯ Multipoint / single connection • Integrated voice control ➯ Call in absence • Recorded announcement ➯ Connection confirmation by voice ➯ Name announcement of the incoming caller • SMS ➯ Reading and answering of SMS messages • Takeover of the call lists and the telephone directory of the mobile telephone • Multipoint technology ➯ 2 mobile telephones are simultaneously connected with the Audio 2010 • Registration of up to 10 mobile telephones • Reproduction of music files of the mobile telephone via Bluetooth® audio-streaming (A2DP) • iPodTM Player* * Requires accessories

keys. The display shows a short overview of the existing keys. The functions of the individual keys are explained in this section. Key functions ➔ Die -key (green) serves for call acceptance. A further function is the selection of menu items. During the play- back of music, the key takes over the function of „Play“ and „Pause“. Brief description: Accepting, selection of menu items, termination of the screen saver ➔ The -key (red) can reject an incoming call and end an ongoing call. During the playback of music, the title can be stopped with the -key. Furthermore, the system can be switched off by short pressing. Brief description: Hang up, reject, stop, termination of the screen saver, activate voice dialing of the telephone -Key -Key -Key -Key -Key (red) -Key (green) -Key -Key (Buzzer) (green) (red)

. Furthermore, navigation through the menu and the Speller can be implemented with this key (explanation Pg. 9. Brief description: Title skip forward, navigation through menu and Speller, termination of the screen saver ➔ The -key serves to skip to the previous title during the music playback. Furthermore, navigation through the menu and the Speller can be implemented with this key. Brief description: Title skip backward, navigation through menu and Speller, termination of the screen saver ➔ With the -key the volume is increased during a telephone call, with voice control and during music playback. In addition, navigation through the menu and the Speller can be implemented with this key. Brief description: Volume increase, navigation through menu and Speller, termination of the screen saver ➔ With the -key the volume is reduced during a telephone call, with voice control and during music playback. In addition, navigation through the menu and the Speller can be implemented with this key. Brief description: Volume reduction, navigation through menu and Speller, termination of the screen saver ➔ The voice control of the Audio 2010 is activated by short pressing of the voice command key (buzzer). For possible speech commands, refer to Chapter „Voice control“ (see Page 24). The mobile telephone's own voice control is activated by long pressing of the voice command key . NOTE: The Audio 2010 is provided with a screen saver. After 60 seconds inac- tivity, the display switches itself off automatically. With any arbitrary key press, the display can be turned on again. This key press does not implement any function, rather it switches the display, however this does not apply for the - key (buzzer) which remains permanently active.

Field strength symbol - Display of the current reception field strength of the mobile telephone SMS symbol - Display for received SMS Arrow symbol - Display for call in absence Display of the initials of the user Battery symbol - Mobile telephone is charged Battery symbol - Display of the storage battery capacity of the mobile telephone Display of the initials of the user, as well as display that a „Multipoint“ connection exists Speller symbols Symbol for confirming the input Symbol for deletion of the last character Symbol for change to the number input Symbol for change to the input of lower case letters Symbol for change to the input of upper case letters Symbol for change to the input of additional characters Symbol, to exit the voice command key Menu item symbols Activated option: This symbol appears before a menu item if it is activated as an option. Deactivated option: This symbol appears before a menu item if it can be activated as an option.

-, - keys. The -key (green) or the -key is used for confirming the selection, and the -key (red) in order to end the Speller. The Speller enables the compiling of individual alphabetic characters or numbers, as well as telephone numbers or names. It is available for various functions of the Audio 2010, for example for the dialing of a telephone number or the gene- ration of a telephone directory entry. The operation of the Speller is explained below: ➔ Entering numbers Navigate to a digit by activating the -, -keys and accept this through pressing the -key (green). You can delete the last digit of the number in each case through pressing the - symbol. If the number is entered com- pletely, this can be selected through pressing the - symbol. In order to exit the Speller, press the -key (red). ➔ Entering name or text Analogous to the number input, you can also enter names or whole texts with the Speller. Navigate to a character by activating the -, -keys and accept through pressing the - key (green). You can delete the last character in each case through pressing the - symbol. If the name is entered completely, this can be saved through pressing the - symbol. In order to exit the Speller, press the -key (red). A switchover between upper case letters, lower case letters, digits and additional characters is possible using the symbols described under Chapter „Speller symbol“, which can be selected with the -, - keys. Operational startup Take time to become familiar with the operation of the Audio 2010 in connection with the mobile telephone. First of all, make some telephone calls where you can determine the optimal conditions for volume and speech direction before you use the Audio 2010 in traffic. For operational startup, the vehicle should be par- ked in a quiet place. A prior arrangement with another call subscriber who can take some time is advantageous in supporting you in making test connections.

nication without cables. Data and voice can be transmitted simultaneously. No line of sight connection between the participating devices has to exist for this purpose. The radio range is 10 m. Faults through other electrical devices or obstacles in the free field can lead to a lower range. The frequency band in which Bluetooth® works is released almost worldwide. That, and the fact that every Bluetooth® product is tested and qualified for trouble-free cooperation with other Bluetooth® devices, ensures maximum compatibility of devices from different manufacturers. The Audio 2010 supports the Bluetooth® hands-free profile. This means that you can operate mobile telephones which support the Bluetooth® hands-free profile. As appropriate, look up in the operating instructions of your mobile telephone which profile it supports. A2DP (Advanced Audio Distribution Profile) is a technology which allows the transmission of stereo audio signals wit- hout wires via Bluetooth® to a corresponding receiver. Please refer to our Inter- net homepage to find out about compatible mobile telephones. Switching on / Switching off With the first operational startup of your Audio 2010, you must start the Audio 2010 through switching on the ignition. You will see the start logo and the main screen is displayed. If no connection to the mobile telephone exists, or if no user is found, the main menu has limited functionality. In order to establish a connec- tion to the Audio 2010, you must select the menu item „User administration“ with the - key (green). A „New user“ is selected there. The Audio 2010 then searches for mobile telephones in your reception area. If your mobile telephone should not be found, you can start the search again. As appropriate, please refer to the section „Problem elimination“. If the name of your mobile telephone is displayed, select it with the -key (green). After the connection with the Audio 2010, the full functionality of the main menu is provided. Functionalities which the mobile telephone does not support are not optional. If the ignition is switched off, the Audio 2010 switches itself off. If the ignition is switched off during a telephone call, this telephone call is maintained and continues. The Audio 2010 is then switched off only on ending the telephone call with hanging up. Entering PIN Bluetooth® After some seconds, you are requested to enter the Bluetooth® PIN. Enter in the mobile telephone the PIN which is indicated on the display of the Audio 2010.

Under certain circumstances, the coupling with your mobile telephone does not function in handsfree mode with the above-designated method. If you are sure that your mobile telephone supports the Bluetooth® hands-free profile, please proceed as follows: Select the point „Coupling of the telephone“ in the list of the found devices. You must now search from the mobile telephone for Bluetooth® devices. Please refer to the corresponding operating instructions as to how you proceed here. The mobile telephone then starts the device identification. In the list of the devices found by your mobile telephone, select „Audio 2010“. You are requested to enter a PIN or a password during the coupling procedure of your mobile telephone. Please enter the series of digits indicated in the display of the Audio 2010. After a short time, the mobile telephone should report that the devices are coupled. You can also interrupt the coupling at any time through pressing the - key (red). If the coupling should not succeed, please refer to the section „Problem elimination“. Automatic connecting If a mobile telephone should already be coupled with the Audio 2010, then the Audio 2010 attempts to connect with this mobile telephone. The last connected mobile telephone is always searched for. If the search was successful, a connec- tion is established automatically. On the other hand, if the search is without suc- cess, it can be that the Bluetooth® on your mobile telephone or the mobile tele- phone itself is not switched on, or that you were not the last user. If you wish to dial, activate this user in the user administration and log them on. Calling If a Bluetooth® link exists between the Audio 2010 and the mobile telephone, you can use the hands-free function of your Audio 2010. If no connection exists, then the hands-free function cannot be used. Please first establish a Bluetooth® link. You can dial a number by voice dialing, by menu or directly on the mobile telephone. Incoming call The call is signaled to you with the ring tone of your mobile telephone, provided that the ring tone is supported over the Bluetooth® link. Otherwise a ring tone is generated in the Audio 2010. If the caller has not blocked the communication of his call number and the mobile telephone supports this function, the number, or if a corresponding entry is found in the telephone directory, the name of the cal- ler, is shown in the display.

-key green) or reject the call ( -key red). If you accept the call, you can regulate the volume with the -, -keys. The setting-adjustment remains stored. You can end the call by pres- sing the -key (red). Making a call Making a call from the Audio 2010 is possible only if a Bluetooth® link exists bet- ween the Audio 2010 and the mobile telephone. You have the possibility to structure a call over the voice dial or over the menu. In order to activate the voice dial, press the -key. With the command „Select number“ you have the possibility to speak the telephone number to be selected and, with the command „Dial “, a name can be dialed directly from the telephone directory. You can find further information on that in Chapter „Voice control“. In order to start a call, there are available the following possibilities: ➔ Dialing from the telephone directory of the mobile telephone, ➔ Direct dialing of a number with the Speller, ➔ Dialing from the call lists of your mobile telephone, ➔ Using the callback possibility from received SMS messages. Finally, you still have the possibility to dial a number directly on your mobile tele- phone. Start of the voice dial of the telephone As a result of short pressing of the - key, the telephone-internal voice dial can be started. With the key -(red) this can be ended again. Ended call On completion of the telephone call, the main menu is entered again. If an inco- ming call is rejected with the -key (red), a skip into the previous menu item is made. Volume control The reproduction volume can be regulated during a call and during an active speech recognition with the -, -keys. Options during the telephone call During the telephone call, the following options can be carried out when the -key (green) is activated:

➔ Microphone mute Using this option, the microphone can be switched mute. At this moment, the call participant cannot hear you any longer. A renewed pressing deactivates the muting of the microphone. ➔ Private mode A change into private mode can also be made during a telephone call, where the point „Private mode“ is selected and confirmed with the -key (green). The call is now possible over the mobile telephone only. A communication over the Audio 2010 is suppressed at this moment and the other vehicle occupants cannot overhear the call. A renewed pressing of the -key (green) ends the private mode. IMPORTANT NOTE: Please consider the legal provisions of your country for making a call in the car! In most countries, making a call is allowed during driving only when using a handsfree system. The menus With the -, - keys you can navigate to a menu item. Select a menu item with the -key (green) or the -key and exit the menu with the -key (red). With renewed pressing of the -key (green), select the submenu of the current menu. The following menu items are available for selection and are listed in the following menu overview: ➔ User administration Under this menu item, user-specific setting-adjustments, such as „Change initi- als“, „Log on“, „Log off“ etc. can be carried out. However, new users can also be logged on. Further information on that under Chapter „User administration“.

These extend from „Ring tone“ to „Update software“. A precise subdivision can be taken from the following overview, where the menu structure is represented. You can find further information in Chapter „Setting-adjustment“. ➔ iPodTM Player The menu „iPodTM Player“ offers the possibility to control the iPodTM using the Audio 2010. Under „Options“, a search can be made in different title lists, as is well known from the iPodTM. You can find further information on this in Chapter „iPodTM Player“. ➔ Music Player The menu „Music Player“ offers the possibility to play music titles and to control these as usual with „Play“, „Pause“, „Stop“, „Forward“ and „Backward“. Under „Options“ the playback devices can be coupled with the Audio 2010. You can find further information on this in Chapter „Music Player“. ➔ Call lists Includes information of the last selected numbers, the calls accepted and mis- sed. You can mark an entry with the -, -keys and start a call with the -key (green). You can find more precise information in Chapter „Call list“. ➔ Telephone directory The telephone directory includes the entries downloaded from the mobile tele- phone. Every number of an entry can be accessed. In addition, a direct dial can be implemented here. You can find further details in Chapter „Telephone direc- tory“. ➔ Messages Includes the list of the short messages („SMS“). Unread messages are marked accordingly. The message menu is sub-divided into „Messages read“ and „New message“. Further information in Chapter „Messages“.

which a switchover can be made simply and rapidly during the operation of the Audio 2010. For every user, the following data (among other things) are stored individually: ➔ Telephone directory ➔ Display brightness ➔ Ring tone ➔ Display language ➔ Volume settings ➔ Call lists Open user administration In order to reach user administration, go into the main menu on symbol and press -key (green). You can then view the users who have made a coupling with the Audio 2010 and the point „New user“. If no users are coupled, select only the point „New user“. Creating new user In order to log on a new user, select the point „New user“ with the -, - keys and press the -key (green). All further steps are analogous to the Chapter „Operational startup“. Changing initials of the user Open the user administration. Then select a user and press the -key (green). Now you reach a submenu. There you select the point „Change initials“. With the aid of the Speller you can now change the name of the user. User change In order to carry out a user change, go into the user administration and select the required user. Confirm with pressing the -key (green). A submenu is ope- ned. Select the point „Log on“. If the selected user can be found, an instant user change then occurs. If the user cannot be found, a return is made again to the user administration.

Multipoint is a function which enables the connection of two telephones syn- chronously with the handsfree system. In this case, the possibility exists to log on a second user, as well as the active user. The active user can continue to use all functions of the Audio 2010 which the mobile telephone supports, where the second user is limited to the functions „Log on“/„Log off“/„Hang up“. As a result of the function, you can for example connect your private and com- mercial telephone synchronously with the Audio 2010. In order to log on the second user with the Audio 2010, proceed as follows: ➔ Create a new user (see point „Logging on a new user“) ➔ Then change to the active user (see point „User change“) ➔ Go into the menu „User“ ➔ Then click on the user which you would like to log on as second user ➔ Now click on „Log on 2nd user“ Logging off users You can disconnect the current Bluetooth® link under point „Log off“ in the user administration under the respective user. Settings Symbol: The following setting-adjustments can be carried out: ➔ Ring tone ➔ Software update ➔ Brightness ➔ Information ➔ Main menu configuration ➔ Language ➔ Call settings ➔ Voice control ➔ Connection settings ➔ Audio ➔ Power off delay ➔ Switching off ➔ Reset Ring tone The menu „Ring tone“ is sub-divided into „Melody“ and „Volume“. Under „Melody“ several ring tones are available, which can be correspondingly adju- sted according to personal taste. The „Volume“ of the ring tone can be set with the -, - keys.

user. Main menu configuration You can fade out certain functions in the main menu. These points are then no longer displayed in the main menu. The following points can be configured: ➔ iPodTM player ➔ Call lists ➔ Telephone directory ➔ Messages Call settings ➔ Automatic call acceptance If this option is activated, an incoming call is accepted automatically after ringing three times. Connection settings ➔ User search You can select between „Search for last user“ and „Search for all users“. ➔ Connection type You can select between „Connect manually“ and „Connect automatically“. Power off delay You can determine how long the Audio 2010 should remain active after shut- down of the ignition. The delayed switch-off time can be adjusted in steps of bet- ween 0 and 30 minutes. Reset Reset all setting-adjustments to default settings. All user setting-adjustments also disappear in this case, including telephone directory data. Software update The software of your Audio 2010 can be updated over Bluetooth®. You can find further information in the Chapter „Software updating“.

2010. Use this information when referring to our service with questions and pro- blems. Language The Audio 2010 supports several display languages. Under this menu item, you have the possibility to change the display language. Voice control ➔ Activate If this point is implemented, the voice control starts. Control is by using sti- pulated commands. You can find more detailed information on that in the Chapter „Voice control“. ➔ Language If your Audio 2010 is provided with several languages for voice control, you have here the possibility to reset these. Audio ➔ Microphone sensitivity Under certain circumstances it can be necessary that the microphone sensi- tivity be adapted, for example when the microphone was installed very far from the driver or also very near. In the case of the Audio 2010, ten possible levels of sensitivity can be selected between. The sensitivity levels are repre- sented to the right in the display as bars. A total of five bars can be seen, where one bar represents two stages. The sensitivity can be adapted with the -, - keys. ➔ Line-In In this menu item, you can activate the line-in and vary the input volume of the audio device connected to the line-in of the electronic box. NOTE: Please note that the connection of one audio device only is permissible with line level. If the line-in of the electronic box is overdriven by too high a signal of the line-out of the audio device, then the volume of the line-out of the audio device is to be reduced.

here whether navigation announcements should be output over the Audio 2010. The radio is switched mute during this output. However, key tones of the telephone are output in the same way as if the telephone generated these. The status is saved for every user and set to the previously set-adju- sted status with new start of the system. Possible states: ON / OFF ➔ Mute delay Here it can be set-adjusted how long should be waited between the activa- tion of the mute-switching line and the speech recognition. This is appro- priate, since car radios require different times for the identification of a mute signal and the changeover of the audio paths in the radio. The time should be set-adjusted so that the first announcement of the Audio 2010 „Main menu“ can be heard complete Possible states: 0.5 sec. / 1.0 sec. / 1.5 sec. / 2.0 sec. / 2.5 sec. / 3.0 sec. ➔ Reset Reset all audio settings to default values. Switching off With this point, the current Bluetooth® link is disconnected and switched off. The Audio 2010 can be switched on by pressing on a key again. iPodTM Player Symbol: The iPodTM Player is activated over the main menu. The activation can be imple- mented only when the accessory „iDapter“ has been acquired or when acces- sories have been retrofitted. The iPodTM Player can also be activated if no mobile telephone is coupled with the Audio 2010. In order to enable the playing of music by the iPodTM, an iPodTM must be connected on the iDapter cable. Connecting / Coupling The connection with the iPodTM is implemented automatically after plugging into the iDapter cable. If the iPodTM icon in the main menu remains gray, the connec- tion has failed. Then the connector of the iDapter cable must be plugged into the

diately by the iPod. If the music is stopped, a search can be made under the point „Option“ in the title lists. Charging the iPodTM The iPodTM is charged over the iDapter. Playback The following functions are available for the playback, and are shown in the dis- play: ➔ Play ➔ Pause ➔ Stop ➔ Forward (title-related in the current playlist) ➔ Backwards (title-related in the current playlist) ➔ Volume control Music Player Symbol: The Music Player is activated over the main menu. The Music Player can also be activated in the case where no mobile telephone is coupled with the Audio 2010. In order to enable the playing of music, coupling with an A2DP-compatible device is required (mobile telephone with A2DP, iPodTM or MP3-Player with A2DP adap- ter, …). Connecting / Coupling Under the menu point „Option“, a „New device“ can be coupled or an already- coupled device connected. In total, up to 10 devices can be coupled, where only one device can be active. If a „New device“ is selected, a Bluetooth® device search is implemented. The required device can be selected here. If the music device does not support any external coupling, the possibility also exists to couple the Audio 2010 from the music device over the menu item „Couple from the device“. In both cases, a four-digit PIN code is displayed by the Audio 2010, which must be entered in the music device. If the PIN is entered incorrectly, a return is made into the device selection and you can carry out the procedure again. If an iPodTM or MP3-Player with A2DP adapter is employed, these devices

„Couple from the device“ must be selected in the device search. After the cou- pling, all playback functions are available to the user. Playback The following functions are available for playback and are shown in the display: ➔ Play ➔ Pause ➔ Stop ➔ Forward (title-related) ➔ Back (title-related) ➔ Volume control (reproduction volume adjustable in 10 stages) These functions are controlled using the keys of the actuator. You can find an explanation of the keys in Chapter „Symbols“. Call lists Symbol: In the menu item „Call list“, you can view the call lists „Dialed number“, „Mis- sed calls“ and „Accepted calls“. Some mobile telephones do not support access to the call lists. Then its own call list is maintained by the Audio 2010. Telephone directory Symbol: The telephone directory entries of the mobile telephone are listed under the menu item „Telephone directory“. As well as the dialing of the numbers from the contacts with the -key (green), entries can be found more rapidly with the search function. Furthermore, the possibility exists to download the tele- phone directory from the mobile telephone under the point „Option“, or to enter numbers by direct dial.

you select your number or name to be dialed and press the -key (green). Then the numbers stored under this name are displayed. Following renewed pressing of the -key (green), the number is dialed. Search With this function, a certain name or certain first letters can be searched in the entries. With the aid of the Speller, the name searched for, or certain alphabetic characters, can be entered. After pressing the -key (green), the telephone directory is searched through for these names and alphabetic characters. Direct dial As well as the voice dial, a direct dial is also possible. Here a number can be entered by hand via the Speller, as described in the points „Speller“ and „CalI setup“. Following confirmation of the number through the - key, a call is set up. Synchronizing Under the point „Synchronizing“, it is possible to transmit the telephone direc- tories from the mobile telephone or from the SIM card to the memory of the Audio 2010. Both telephone directories can also be synchronized together. If a telephone directory is selected, this is confirmed with the -key (green). Now a charging bar appears on the display. This signals the ongoing progress of the synchronization process. If the download is successful, the entries are located in the telephone directory of the Audio 2010. Furthermore, the possibility exists to interrupt the download manually with the -key (red). If you decide on inter- ruption, this decision must be confirmed again with the Yes/No request. In case of „Yes“, the synchronized entries are deleted and returned into the menu „Telephone directory“. In case of „No“, the synchronization is continued. Sorting Under this menu item, you can sort the entries of the telephone directory accor- ding to first name / last name or last name / first name. The last name / first name sorting is set-adjusted ex-works. In case of change, a renewed synchronization of the telephone directory with the mobile telephone is implemented.

messages. The menu is structured in a similar way to what the user of the mobile telephone is familiar with. The received messages can be viewed under point „Read message“. The sender of the message can be called back over the function „Callback“. The possibility also exists to answer the sender by text communication (SMS). For responses to a text communication, different presentations are available to you. Select one of these and confirm the command key „Send“. The message is sent. If you want to send a new SMS, then select the command key „New message“. Here you can select a presentation and then send this. In addition, you have the possibility to enter a telephone number by hand or to select a contact from the telephone directory. Under the SMS text you can find the point „Read out“. Here you have the pos- sibility of having the SMS read out. You can also activate this function if you sel- ect a message in the list of indicated messages and make a long press on the -key (green). If the function „SMS over Bluetooth“ is not supported by the mobile telephone, then the menu item „Messages“ is not available for selection in the Audio 2010. Voice control The interactive voice control of the Audio 2010 enables you to dial a name or number through voice data entry. While the number dialing enables you to speak a number directly, on the other hand you have the possibility to select names directly from the telephone directory. Language According to national variant, your Audio 2010 supports speech recognition in up to 3 languages, of which one is activated. In order to change the active identifier language, select in the menu the point „Setting-adjustment“ -> „Voice control“ --> „Language“. Now a list of the available languages is displayed to you. Select the required language and confirm with pressing the -key (green). The Audio 2010 will now save your setting-adjustments and begin with the updating of the identifier language. The status of this procedure is displayed to you with a progress bar chart.

Voice control is possible only if no call connection exists. If the -key is pressed, the readiness text sounds „Main menu“, and the request appears in the display output lettering „Please speak …“. You can interrupt every speech dialog at almost any point through pressing the -key (red). If the Audio 2010 waits for a speech command, you can also end a dialog through speaking the command „Interrupt“. If no Bluetooth® mobile telephone is connected with the Audio 2010, the voice dial cannot be activated. The following speech commands are possible: --> „Dial / Call at home / private … at work / in the office / official business … mobile / (call) mobile / en route … --> „Dial number“ --> „Display / browse / list / show) dialled (Numbers / Names)“ --> „Display / browse / list / show) (rejected / missed) calls“ --> „Display / browse / list / show) (answered / received) calls“ --> „Redial / dial again / call again“ --> „(start / playback) iPod“ --> „(show / display / open) iPod“ --> „(start / playback) (Music player / Media player)“ --> „(show / display / open) (Music player / Media player)“ --> „(show / list / display / open) (Phone(book) / contacts) / contacts)“ --> „(show / list / display / open) Call lists“ --> „(show / list / display / open) Settings“ --> „(search / log on / register) new user“ --> „Log on user“ --> „Log on (user) “ --> „(load / synchronise) Phone(book / contacts)“ --> „(show / list / display / open) SMS input“ --> „say own (phone) number“ --> „(logoff/ disconnect) user“ --> „delete (user) “ --> „default settings“ --> „Help“ --> „(abort / cancel)“

Further speech commands / Explanation „Dial / Call at home / private / at work / in the office / official business / mobile / (call) mobile / en route …“ • „Yes / Call / Dial“ • „No / Back“ • „Break off / Interrupt“ • „Help“ „Dial number“ • „+, *, #, 0, 1, …, 9“ • „Delete all“ • „Delete / Revise / Change“ • „Repeat“ • „Yes / Call / Dial“ • „No / Back“ • „Help“ „Display / browse / list / show) dialled (Numbers / Names)“ • „Yes / No / Back“ • „Repeat / Repetition“ • „Main menu“ „Display / browse / list / show) (rejected / missed) calls“ „Display / browse / list / show) (answered / received) calls“ „Redial / dial again / call again“ This command enables you to dial the last dialed call number again in a simple way. No further dialog is necessary. The selection can be implemented only if the mobile telephone is booked in. You are informed definitively about the dialing beginning through an announcement. „(start / playback) iPod“ • „Yes / No / Back“ • „Repeat / Repetition“ • „Main menu“ „(show / display / open) iPod“ „(start / playback) (Music player / Media player)“ „(show / display / open) (Music player / Media player)“ „(show / list / display / open) (Phone(book) / contacts) / contacts)“ „(show / list / display / open) Call lists“ „(show / list / display / open) Settings“

• „Repeat / Repetition“ • „Main menu“ „Log on user“ „Log on (user) “ „(load / synchronise) Phone(book / contacts)“ • „(load) (Contacts) from SIM (card)“ • „(load) (Contacts) from telephone“ • „(load) all contacts“ • „(repeat / repetition)“ • „(Main menu / back)“ • „(abort / cancel) „(show / list / display / open) SMS input“ • „Yes / No / Back“ • „Repeat / Repetition“ • „Main menu“ „say own (phone) number“ (is announced immediately) „(logoff/ disconnect) user“ • „Yes / No / Back“ • „Repeat / Repetition“ • „Main menu“ „delete (user) “ „default settings“ „Help“ The command can be called at all times, similar to „Interrupt“. If „Help“ is called, the Audio 2010 explains , which commands are possible with which function at the time of the call. „(abort / cancel)“ With the command the current dialog is ended immediately without a function processing. Voice data entry Further speech commands / Explanation

Audio 2010? Under the menu item: „Telephone directory / Option / Direct dial“. 2. What are the precise dimensions of the Audio 2010 components? You can find the dimensions in the installation instructions under the point „Technical data“. 3. Is the Audio 2010 suitable for all motor vehicle types? The Audio 2010 is suitable for all types. See installation instructions! 4. Is there a list of the optional charging holders? A list of the optional holders is available on the home page and is continuously updated. 5. Are the software updates for the systems free? Yes software updates are free. 6. Where can the Audio 2010 be purchased? Over authorized dealers. You can find an authorized dealer in your proximity on our home page under the point „Dealer“/„Dealer search“. Dealers iden- tified as „Insider“, are particularly qualified FWD dealers. 7. What possibilities are there to play music? On the Audio 2010 music can be transmitted both over Bluetooth® (A2DP), over the iDapter and over the Line-In. Use a A2DP-capable mobile telephone for that, or make your MP3-Player or iPodTM A2DP-capable with a dongle/ adapter. If an MP3-Player without A2DP is employed, a jack cable can be employed for connecting to the Audio 2010. 8. Is the Audio 2010 provided with an external antenna connection? In combination with the optional charging holder and the corresponding base plate, the mobile telephone can be connected to the external antenna connection.

Audio 2010 FAQ - Frequently Asked Questions Problem Cause Solution Audio 2010 does not switch on Supply voltage not present As appropriate, replace fuse as well as test cables and connections Ignition not switched on Switch on ignition Ignition line interrupted Check line and 5A fuse In the call, your connected party cannot hear you. Microphone not plugged in Connect microphone plug connector with the electronic box; a repla- cement is necessary in case of cable defect Connected party complains about background noises Microphone in the air stream Mount microphone at another location or reduce ventilation Mobile telephone very close to parts of the Audio 2010 or to the car radio Increase separation distance of your mobile telephone to the Audio 2010 and/or to the radio. Connected party complains about echo effects Too short separation distance between micro- phone and loudspeaker Increase separation distance or reduce volume Volume too high Reduce volume Sound is inconsistent, rasping Bad Bluetooth® link Reduce the separation distance between mobile telephone and Audio 2010 or remove (metallic) obstacles as appropriate.

Problem Cause Solution After switch-on of the ignition, the connection to the coupled mobile telephone is not established. The mobile telephone is not in range. Bring the mobile telephone into range of the Audio 2010. The Bluetooth® interface in the mobile telephone is deactivated. Switch in Bluetooth® in your mobile telephone „ON“ (option „Automatic“ does not satisfy). The mobile telephone requires a confirmation of the connection establishment. Confirm the connection to the mobile telephone. Deactivate the security query (see operating instructions of the mobile telephone). One of the two devices do not have a valid connection key any longer. Carry out a new coupling. The iPodTM cannot be connected with the Audio 2010. Connection of the components incorrect Disconnect system from the supply network and test connection; repair possible connection faults iDapter was not initialized completely Shut down system and restart iDapter incompletely plugged in Plug in cable to the iPod again System does not react any longer to operational action Press the green and the red key simultaneously for longer than 2 seconds. After short delay time, the Audio 2010 reinitializes itself .

ware updating is possible over Bluetooth®. In order to obtain the most current software, please visit our Internet site at www.fwd-online.de. A precise descrip- tion of the updating procedure is enclosed with the software. Hotline Do you have questions or suggestions? Would you like to find out more? Do you require consultation and service on site? Call us! Our hotline is available to you at the following times: Monday - Thursday from 07:15 hours to 18:00 hours Friday from 07:15 hours to 16:00 hours We recommend the following steps: 1. Check whether you can solve the problem with the aid of the above section „Problem elimination“. 2. Attempt to describe the problem as exactly as possible over the hotline. You can reach our hotline at the following numbers: Within Germany (free): Telephone: 0800 - 0 393 393 Outside of Germany: Telephone: +49 (0) 3377 - 316 233 +49 (0) 3377 - 316 234 Telefax: +49 (0) 3377 - 316 244

D - 15806 Dabendorf Fon: +49 3377 316 - 0 Fax: +49 3377 316 - 300 Email: [email protected] Web: www.fwd-online.de Funkwerk Dabendorf GmbH