Tesco CFH1 Operation & User’s Manual

Delamare Road, Cheshunt, Herts, EN8 9SL $ Turn the thermostat switch anti-clockwise towards the Storage minimum position to lower the temperature. Turn the $ Store the heater safely out of direct sunlight and out of the thermostat switch clockwise towards the maximum reach of children. position to increase the temperature. $ When the fan is operational the indicator light will be on, even though the thermostat may have switched the heating This appliance is intended only for normal household use. element off. The appliance must be properly installed and operated in $ In the “ “ position the thermostat is inoperative. accordance with these instructions. Failure to do this will invalidate the warranty. After using the heater Before you turn off the appliance $ Turn the heat select switch to the “ ” position. Operate the appliance for 5 minutes to lower the internal temperature and then turn the heat select switch to “O”. $ Switch off the unit at the power outlet and unplug. MAINTENANCE AND CLEANING Clean the air inlet and air outlet of the appliance thoroughly at least twice a year. Before you clean the appliance: Class II construction double insulated. $ Turn the heat select switch to the “ ” position. Operate the appliance for 5 minutes to lower the internal This product must not be connected to earth. temperature and then turn the heat select switch to “O”. $ Switch the appliance off at the mains and unplug it. Wait until the appliance thoroughly cools down. To clean the appliance: $ Use a barely damp cloth to clean the surface of the appliance DO NOT use abrasive chemicals steel wool, scouring or abrasive pads on any part of the heater. Make sure no liquids penetrate the heater casing. $ Dry the appliance before re-use or storage. WARRANTY Your appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please return the unit to your nearest Tesco store together with the original receipt as proof of purchase. This warranty in no way affects your consumer rights. SPECIFICATIONS Model: CFH1 Fan Heater Power: 220-240 Volts AC 50Hz:1500W max Net Weight: 1.375 kg UK: Waste electrical products should not be disposed of with household waste. e for details. ROI: Produced after 13th August 2005. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Separate disposal facilities exist, for your nearest facilities see www.recycle-more.co.uk or in-stor Page 4 CFH1 FAN HEATER USER GUIDE

USING YOUR HEATER maximum position. This appliance should be operated on a stable surface. $ Then turn the heat select switch to choose cold warm or hot If you are operating it on the floor ensure there are no air. The operating light will illuminate. obstructions and that objects such as newspapers are not going $ Turn the heat select switch to the “ “ position for cool air. to be placed on or near the appliance. $ Turn the heat select switch to “I” for warm air: the heater If you are operating it on a table make sure there are no other will operate at low power. objects in close proximity and that the heater is so placed that it $ Turn the heat select switch to “II” for hot air: the heater will will not fall. operate at high power . IMPORTANT NOTE: Tip-Up Safety Switch When switched on for the first time the heater may emit a small The Tip-Up switch is designed to switch the heater off in the amount of vapour or light smoke - this is normal. The vapour will event that it is lifted or falls over.If the heater is placed on a very burn off safely within a few minutes. indented surface or on a carpet with exceptionally long, soft pile OPERATION the safety switch may prevent the heater from turning on. Should this happen replace the heater on a firmer, smoother, The heater is fan assisted. The heat select switch turns the fan on surface. and the heater will blow cold or warm air depending on the setting. The thermostat controls the temperature. Temperature Control $ When you feel the room temperature is comfortable, turn $ Turn the thermostat to the minimum and turn the heat the thermostat switch anti-clockwise slowly to the select switch to the “O” position (see picture). In this minimum position until the appliance stops working. position the heater is switched off and the operating light will be extinguished. $ The thermostat will now keep the room temperature at the desired temperature. $ When unplugging the power cord, hold the plug top, not SAFETY GUIDE - PLEASE READ CAREFULLY the power cord. Please follow all the safety precautions listed below for safety $ Store the appliance away from direct sunlight and out of and to reduce the risk of injury or electrical shock. the reach of children. $ Read all the instructions carefully before using this $ DO NOT touch the fan inlet or outlet when the appliance is appliance and keep them for future reference. operational. RISK OF BURNS $ Retain the manual. If you pass the product on to a third $ Do not place soft objects or fabrics over or in close proximity party, make sure to include this manual. to the fan or otherwise obstruct the fan inlet or outlets. $ Unplug the appliance from the mains supply when not in $ DO NOT insert any objects into either the air inlet or the use, or before cleaning any part of the appliance. outlet of the appliance. $ This appliance is for household use only. $ There are no user serviceable parts in your appliance. $ Do not use outdoors or in damp or wet conditions. Unauthorised dismantling or servicing will void the $ Do not immerse the appliance or the electrical cord or plug product warranty. in liquids. $ Do not operate the appliance with a damaged cord or plug $ Do not use the appliance near a fire or other source of heat. or after the appliance or any component has been $ Place the appliance on a stable and flat surface where damaged. Send the heater to a suitably qualified or there is no risk of it tipping over or being knocked over. appointed service agent for inspection and repair. $ Ensure that there is enough space for the fan heater while $ If a fault develops with the Tip-Up safety switch, do operating. There should be at least 50 cm around the not use the appliance. Have it repaired by a qualified appliance, and the distance in front of the air outlet should service agent before re-using it. be at least 120 cm. $ Do not use the appliance for any purpose not expressly $ DO NOT place the appliance immediately below an specified in this manual electrical socket or other appliance. $ THIS APPLIANCE MUST BE ATTENDED AT ALL TIMES $ Keep flammable and explosive objects away from the heater. WHEN IT IS SWITCHED ON $ DO NOT hang the appliance on a wall, furniture, etc. ELECTRICAL INFORMATION $ DO NOT use the heater on carpets or soft floor coverings. Before using this appliance ensure that the voltage of your $ DO NOT use the heater in the immediate surroundings of a electricity supply is the same as that indicated on the rating plate bath, a shower or a swimming pool. of the appliance. $ DO NOT place the appliance close to children or pets. Never THIS APPLIANCE MUST NOT BE EARTHED. let children operate this appliance. Close supervision is The means of disconnecting this appliance from the mains necessary when this appliance is used near children. supply is the mains plug. This should be unobstructed and $ This appliance is not intended for use by persons (including readily operable at all times . children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless SAFETY PROTECTION SWITCH they have been given supervision or instruction concerning If the ceramic element overheats or heat in the appliance is use of the appliance by a person responsible for their safety. allowed to build up to excessive levels a protection switch will $ Children should be supervised to ensure that they do not automatically switch the fire off. If this happens the fire will not play with the appliance. operate and must be taken to a qualified service facility for repair. Page 2 Page 3 CONTROLS AND FEATURES Thermostat Heat select switch Indicator light Air outlet Air inlet CFH1 FAN HEATER USER GUIDE Your heater is fan assisted for improved air circulation. The unit INTRODUCTION features a built-in thermostat and a safety switch which This appliance uses a PTC heating element. PTC units heat disconnects power to the appliance if it is tipped over. rapidly, have no incandescent elements and have intrinsic self regulating properties. Tip-Up Safety Switch UNDERSIDE VIEW Carry handle