Python 991 Responder LC3 Owner's Manual

remote start system. Reading this Owner's Guide prior to using your system will help maximize the use of your system and its many fea- tures. For more information please visit the belovv' 'vvebsite: http://www.pythoncarsecurity.com - For general and additional gUide information. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. ~ Welcome to the best generation of security with system contains everything you need. remote start. Your • Responder LC remote control with SST technology for superior range and reliability • l-way Companion remote control • AC adapter for charging your remote control • Owner's gUide • Quick reference card • Warranty card Quick Reference Card I~ ....;·!J· Q ; ~ i ._-~-} f PVIIIDII

. ~, :L..L1 Your Warranty Your Responder LC system comes with a warranty. Please make sure you receive the warranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer. Your product warranty must be validated within 10 days of purchase. You can validate it online at www.prodregister. com/directed or complete and return the warranty registration card. Quick Reference Cord Carry this card with you to reference your system's many features. Replocement remote controls If additional remote controls are desired, please see your authorized dealer or visit us at www.directedstore.com to order. Part numbers are: 7752P for Responder LC 2-way remote control and 7652P for the companion remote control. Your system can also be used with optional Responder HD color 2-way remote control (794 1P).

4 Keys to using this manual 5 Responder LC 2-Way 6 Status Screen Icons 8 Using your System 11 Commands and Confirmations 11 Performing Commands 11 Responder LC Command table 12 Fault Condition Alerts 12 Basic commands (Direct Access) 14 Arm 14 Disarm 14 AUX/Trunk 15 Remote Start...................................................................................... 15 Advanced commands: (Level 1) 16 Silent Arm 16 AUX 1 16 Runtime Reset 17 Temp Request 17 Advanced commands: (Level 2) 18 Sensor Bypass 18 Remote Valet 18 AUX 2 18 Timer Start 19 Runtime Remaining 19 Advanced commands: (Level 3) 20 Sensor Silent Arm 20 AUX 3 20 Smart Start 21 Alarm Report 21 Advanced commands: (Level 4) 22 Full Silent Arm 22 AUX 4 22 Defogger '" 22 Responder LC configuration 23 Navigating menus and options 23 Button operation 23 Access menu items 23

24 Remote Start Info 25 Runtime Alert 26 Car 2 26 Screen Color 26 Temp Unit 26 Button Beep 27 System Type 27 Clock Set 27 Review 27 Exit 27 Sensor Adjust: 27 Pair Remote: 28 Demo mode: 28 Power Off: , 29 Exit: 29 Alarm Features 30 Normal Arm Protection 30 Sensor Silent Arm protection 30 Full Silent Arm Protection 31 Sensor Warn-away Messages 3 1 Full Trigger Messages 31 Emergency Override 31 Trigger Zone Fault Report.. 32 Alarm Report when disarming 32 Alarm Report when requested 33 Nuisance Prevention (NPC) 33 Remote Start Features 34 Pit Stop Mode 34 Key Takeover 34 Remote Start Safe-lock 35 Disabling Remote Start 35 Advanced Start 35 Temperature Reporting 36 Remote Start Time-out Alert 37 Manual Transmission Start (MTS mode) 37 Turbo Timer Mode 38 Remote Start Error 39

40 Passive Arming 40 Auto Re-orming 40 Valet Mode 41 Power Save 41 Rapid Resume 41 Automatic Remote Updates 4 1 Out of Range 42 No Remote Output 42 Feature not Available 42 1-way Companion Remote Control 43 Accessing Commands 44 Button Auto Lock 44 Car Select 44 Programming 45 Battery Information (l-Way) 46 System Expansion Options 47 Battery Information (Responder LC) 49 Low Battery 49 Battery Life 50 Battery Disposal 51 Glossary of Terms 52 Government Regulations 54 Warning! Safety First 56 Installation 56 Remote Start Capable 56 Manual Transmission Vehicles 56 Interference 58 Upgrades and Batteries 58 Water/Heat Resistance 58 Limited lifetime consumer warranty 59

battery that can only be serviced by an authorized Directed dealer_ Due to transit and storage time prior to your purchase, the battery charge may have depleted _ To ensure proper operation, check the battery level and connect the battery charger if not fully charged _See Battery Information and Status Screen Icons sections for more informa- tion about the battery. Charging the remote control: 1. Plug the AC adapter into a 11 OV AC outlet. Insert the mini-USB connector into the mini-USB port located on the side of the remote control (see diagram under Responder LC 2-way). The text field will display'''••'''' to indicate the remote control is charging (The remote remains operational while charging and can command the system). 2. Once fully charged the text field will display ,·'UIl . 3. The remote control is then ready for use. Disconnect the mini- USB end from the remote control first and then the AC adopter from the AC outlet. Note 4 © 2009 Directed Electronics. All rights reserved.

• Hold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several sec- onds. ·;,~IIIJ.{ this style denotes the text which appears in the text field portion of the Display during operations described in the manual. If the text string is too long for the text field, it then ploys and loops sequentially word by word. • Italicized words denote section/sub headings in this gUide and can be located through the table of contents. • An asterisk (*) when used after a word or phrase denotes that additional details can be found in related sections usually noted at the bottom of the page or end of the section. Keys to using this manual Specific actions (in bold type) and style conventions are used consis- ~ tently throughout this manual, they are as follows: ..~ 0- jn (1) © 2009 Directed Electronics. All rights reserved. 5

Command .--------r-----..,- Buttons 6 ~. Feature " Description " Internal Antenna Used for transmitting and receiving information b- - Display Status screen - the upper portion of the display contains status icons for the System, Siren, Alarm zones, Remote Start and I Remote Control. I Text field - the lower portion of display - shows the Clock, Runtime or Temperature during Remote Start, as well as Command confirmations, Page messages and programming menus ~ Command buttons (4) Used to perform arming, disarming, aUXiliary channel and remote start commands Function button Used to access function levels for commands, configura- tion menus for programming, Car Selection, and to request reports. Mini-USB Port The battery charger plugs into this port. © 2009 Directed Electronics. All rights reserved.

. IU--++- Control button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: • The In-vehicle system antenna, for 2 way communication. • The Status LED, as a visual indicator of the system's status. • The Control button, for placing the system into Valet Mode* and to perform the Emergency Override* * operation. I * See Remote and System Operations section for details. ~,l I * * See Alarm Features for details. L ~ © 2009 Directed Electronics. All rights reserved. 7 -.,,:-:;'·~::.;i·.?::'---· ; '-. ~- i'/.,~:~i !~2

Armed: The system is Armed, the alarm is enabled. Locked: The system is Locked in Valet, the alarm is disabled. Disarmed: The system is Disarmed, the alarm is disabled. Unlocked: The system is Unlocked in Valet, the alarm is dis- abled. 8 Vl .2 .E V') c OJ ~ V') cJ + ALL ..-).. .-, ~ irI Siren is disabled for sensor triggers; remote is paged for all trig- gers (Sensor Silent Arm) . Siren is disabled for all triggers; remote is paged for all triggers (Full Silent Arm). Remote start is active, the engine is running . Timer Start is On; Remote Start is On . Note: VVhen the icon is without an arrow head: Timer Start is enabled: Remote Start is Off © 2009 Directed Electronics. All rights reserved.

Note: When the icon is without an arrow head: Smart Start is On; Remote Start is Off. Manual Transmission Start mode is enabled, the enaine can , '-J Displays the vehicle interior temperature On during Remote Start after performing the Defogger On command On during Warn-away and Full Trigger message output On during Trunk Zone Full Trigger output and Aux/Trunk channel activation On during Fault Report to indicate the Trunk is open and bypassed when arming On during a Sensor Zone Full Trigger output On during Fault Report to indicate a Sensor is active and bypassed when arming On during the Door Zone Full Trigger output On during Fault Report to indicate a Door is open and bypassed when arming On during a Hood Zone Full Trigger output On during Fault Report to indicate the Hood is open and bypassed when arming On when remote is set to command the system programmed as Car 1* On when remote is set to command the system programmed as Car 2* » ..... Q'" Q Q .... ::L. n··· CD © 2009 Directed Electronics. All rights reserved. 9

3MI V2, 1M or Empty On while the remote control is transmitting a command On while the remote control is receiving a message On with Out of Range fault tone to indicate the remote failed to receive a command confirmation Pager on: The remote will wake up to listen for messages Pager off: The remote will not wake up to listen for messages The remote will Vibrate when messages are received The remote will emit Beeps and Tones when messages are received Displays the Clock, Runtime, Temperature, message text and feature menus On after the Garage Open * * message has been received, • On after the Garage Closed * * message has been received, * This icon not present until the Car 2 is turned on in the Setup Re- mote configuration menu. * * This icon not present until the remote IS paired with an optional go rage door opener. 10 © 2009 Directed Electronics. All rights reserved.

Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the r'ommand buttons. Basic commands control the most often used security and remote start fea- " tures while Advanced commands control more specialized features and request reports. Confirmations for Basic or Advanced commands are indicated first by siren chirps and parking light flashes, and then by Text, Icons and beeps or tones on the remote control. A description of each feature confirmation is found in the following Basic command and Advanced command sections. Performing Commands Perform Basic commands by pressing one of the command buttons while in the Direct Access level. Direct access is available while the text field displays the Clock, Temperature or Runtime. Perform Ad- vanced commands by first accessing one of the Function Levels and then pressing one of the command buttons while within a level. Func- tion Levels are available when the text field displays LEVEL 1,2,3 or 4. Advanced command example: Silent Arm 1. Press the f button once to access Function Levell, the text field will display },"10;.~~ . 2. Press the ~ button while-~"'il;0 text is still on to perform the Silent Arm command. 3. The Responder LC remote will display 'i\x·...."....:;!£{ in the text field and update the status screen icons. © 2009 Directed Electronics. All rights reserved. 11

Direct Access Ixl Ix2 Ix3 Ix4 LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Arm/Lock Silent Arm Sensor Sensor Silent Full Silent (Panic) Bypass Arm Arm Disarm/Unlock Silent Disarm Remote Valet Cor Finder Remote Start Runtime Timer Start Smart Start Defogger Reset e Aux/Trunk AUX 1 AUX 2 AUX 3 AUX4 I Advance Level Temperature Runtime Alarm Change Car Check Remaining Report (3s), Enter programming (8s) Fault Condition Alerts If, when performing a command, a condition exists that does not allow activation of an Alarm feature * or Remote Start feature * * , the or ¥ LAlLI or REMOTE START ERROR text and a fault tone will play. * 12 Alarm feature not available when the system status is incorrect upon receiving the command. (Example: Sensor bypass com- mand is received when disarmed). Refer to the notes included in the following command descriptions that address these faults or go to Feature not Available under the Remote and System Operations section for more details. © 2009 Directed Electronics. All rights reserved.

incorrect upon receiving the command. (Example: Runtime reset command received when remote start is off) Refer to the notes included in the command descriptions that ad- dress these faults or 00 to Remote Start Error under the Remote \..,/ r. . r. " ( 1 , ·1 .)TarT leaTures secTion Tor more oeTalls. A '''' .. ."'II ·'3·'· . . = .~.. . ;, . os.. "CIt . © 2009 Directed Electronics. All rights reserved. 13

._-r.~~··i'~ I: li)~i I 6:30 1_._,..~...__ .. _ .....__,>-.....".-.,..._,~ The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The"_~:: text and beeps play to confirm and the System Status Icons update. If Valet mode * is On, the doors lock and the x11t.flle';' text and tone play. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report* * plays. To Arm and Panic r01 1 Press and hold U The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren and flashes the parking lights. The !;~_*~ text and siren tones play to confirm. Press the AorDbutton to stop the output. Disarm ~ Press and release () The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. The tll_X text and beeps play to confirm and the system status icons update. If Valet mode * is On, the doors unlock and the ~;;f;"""~"ii text and tone play. More than 2 siren chirps and remote beeps indicate a trigger has oc- curred. The '1_: text is replaced by the Alarm report. * * 14 © 2009 Directed Electronics. All rights reserved.

See Alarm Features for details. AUX!Trunk Press and hold e The Trunk opens (if connected) when this button is pressed for 2 sec- onds. The «~.I.s; text and tones play to confirm. Remote Start Press and release {:) Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the jj~:_#."4.~f;; text and tones play, or the engine and parking lights turn Off and thef•••1'_~III:,t; text and tones play to confirm, the Remote Start status icons update. The {:) icon will display in the status screen and the text field will display the Runtime, Temperature or Clock as programmed. If Remote Start fails to activate, ;;f~;_1If"~'.O';~ij*;text and a fault tone play while the parking lights flash to identify the reason. * * * I * * * See Remote Start Error (under Remote Start Features) for details. I I For Manual transmission vehicles see Manual Transmission Start in the I ~~mote S,-art Features section for more det?~:~__.______ I © 2009 Directed Electronics. All rights reserved. 15

Silent Arm rn Press and release IU~ The alarm arms, doors lock (if connectedL and the parking lights flash once. The f%~•••[/_.>0f text plays to confirm and the System Status icons update. Valet mode * or Trigger Zone Fault report* * messages may be received. Silent Disarm ~ Press and release () The alarm disarms, doors unlock (if connected), and the parking lights flash twice. The in_m_f.~ text plays to confi rm and the System Status icons update. The Alarm report* * may replace the Silent Dis- arm text. AUX 1 Press and release e Activates (or if On, deactivates) the Aux 1 output. The /:••1....t text and On tones or Off tones play to confirm. 16 © 2009 Directed Electronics. All rights reserved.

If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The !'~;3!_.';;;;U) text and tones play to confirm. The text field will update if set to display runtime. Note Temp Request Press and hold the f button Requests the vehicle's interior temperature and temporarily displays it via status screen icon ! and text field. * See Remote and System Operations section for details. * * See Alarm Features for details. © 2009 Directed Electronics. All rights reserved. 17

Press and release the f button 2 times. Sensor Bypass Press and release .~.._ aEa -Ea ;:I .... v u '- The parking lights flash each time this command is received to indicate the Sensor bypass type. 2 flashes indicates sensor Warn-away zones are bypassed.llr.,;;"",?, 1 beep and 1 fault tone play to con- firm. 3 flashes indicates sensor Warn-away and Full Trigger zones are bypassed./;;•••';\".}" 1 beep and 2 fault tone play to confirm. 1 flash indicates sensor bypass is Off,III.MlI';.' and 1beep play to confirm .. Note Remote Valet (~ \ ",~ Press a nd release <~'> Enters (or if On, exits) Valet Mode. TherMll\/\ text and beeps (1 for On, 2 for Off) play to confirm and the System Status icons update. See Valet Mode for more details AUX 2 Press and release 8 Activates (or if On, deactivates) the Aux 2 output. The AtI.CIf..M.t text a nd On tones or Off tones play to confi rm. 18 © 2009 Directed Electronics. All rights reserved.

~,. Activates (or if On, deactivates) Timer Start. The parking lights >~ flash qUickly four times for On and slowly four times for Off. The"§ ~w~l.'I•••f.J!'> or (0J5isi••••WltMl';alp(4';i): text and beeps play to con-I;)" :;)1."" firm and the Remote start status icons update. """~ I Note I'-'~--- Runtime Remaining Press a nd hold the f button Requests the remaining Remote start runtime and temporarily displays it in the text field. Note ! I * See Advanced Start under Remote Start Features for more details. I'--------_._--",.------_._..._-------_.__...__._-_._---_.._...._._---_.....__.._._-_._._._._---" © 2009 Directed Electronics. All rights reserved. 19

Sensor Silent Arm* Ii5i Press and release 0 The alarm arms, doors lock, the siren chirps and parking lights flash 3 times. The .,__=:-.e~~~_ text and beeps play to confirm and the System and Siren Status icons update. (or finder ~ Press and release () The siren emits one long chirp and the parking lights flash for 10 seconds. The _i text and beeps play to confirm. The parking light flashes stop if armed or disarmed while Car Finder is in progress. AUX 3 Press and release 8 Activates (or if On, deactivates) the Aux 3 output. The~)~("_f%gi text and On tones or Off tones play to confirm. 20 © 2009 Directed Electronics. All rights reserved.

Activates (or if On, deactivates) Smart Start. The parking lights flash qUickly five times for On and slowly five times for Off. The ~I%ll••%f••!:III!~!; or 0!ill_fflllB~f.I!?f! text and beeps play to con- firm and the Remote start status icons update. I Note L Alarm Reporf* Press and hold the f button Requests a report of the most recent triggers and temporarily displays it in the text field. The report clears when the ignition is turned on. ~e Alarm Features for more details. i I * * S~e Advanced Start under Remote Start Features for more details. I L . . ! © 2009 Directed Electronics. All rights reserved. 21

button 4 times. Full Silent Arm* r;~ ) (\ Press and release l~ LEVEL l.f The alarm arms, doors lock, and the siren chirps and parking lights flash 4 times. The;:......,)..',,' text and beeps ploy to confirm and the System and Siren Status icons update. AUX 4 Press and release 8 Activates (or if On, deactivates) the Aux 4 output. The:R811.%I_&~ text and On tones or Off tones play to confi rm. Defogger** Press and release {:) Activates the vehicle Defogger circuit (if connected) while Remote Start is activated. The ,':.'-i'QN; text and beeps ploy to confirm and the Remote Start status icons update. For convenience, the Defogger cir- cuit will also automatically activate 10 seconds after remote starting if the temperature is below 55°F. Note ~--:-~See Alarm Feo~ur~-;f~~-;;;~redeta~---------------' -- I . * * This feature must be installed and turned on by an authorized Directed i ; dealer. ! ; .•.,."~..~.__w_.__~ ,,.__..__ ~_._. __.., . .w ••• ~••~._.~~_._"._.__w. •••, ~.... .,.~,,__ .'__' __"~'.~.''''''''_~__~~''·~ ' ·_'~_~_''''_.__'W·__.,,..._.__.w,~~__~_..--._..~_._ •.~_~__~-l 22 © 2009 Directed Electronics, All rights reserved.

are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. Button operation • To access menus, set options, and to perform actions that are displayed in the text field, use the f button. • To scroll the menu lists in the text fiel~se the 8& (~ buttons. • To exit configuration: use the ~ or () buttons. Access menu items 1. Press and hold the f button for 8 seconds, the remote will beep once, ~;~_t.I.~ is displayed. (If Car 2 is on, ignore the Car Select text and beep after 3 seconds). 2. Release the f button to display the Main Menu item list, _~...' is displayed. 3. The Main Menu has been accessed and configuring can begin. Use the following process to view the Main Menu features, op- tions and settings in the text field. The following actions are com- monly used throughout the configuration operation, • Press the 80r {:) buttons to change the feature or option that is displayed in the text field. • Press the f button to choose the feature in the text field and view its options. Press it when the desired feature or option is in the text field to set it as the new setting. © 2009 Directed Electronics. All rights reserved. 23

of the remote control, Setup Remote menu: Keypad Lock Options:""',"'ltJII' When~ir.JII;, the buttons do not lock and always perform a com- mand when pressed. When set to._~, the remote buttons lock after a 20 second lapse between buttons presses to prevent unintentional operations. If a button is pressed when locked a fault tone plays as an alert followed by unlock instructions in the text field. To unlock the buttons, press the f button followed by the :8 button. The unlock tones play and ';f:,..,,;t£ is displayed in the text field, a command can now be performed. Auto unlocking After turning the ignition off, a message to the remote will un- lock the keypad buttons the next command is performed. If Auto Unlocking is not desired this message can be turned off by an authorized Directed Dealer. Page Mode Options:;_:""",·:Glfi,f;'.;. Paging is how the Responder LC remote monitors your system's messages.i_;X••> extends battery life by turning Paging 24 © 2009 Directed Electronics. All rights reserved.

period. Just press any button to resume system monitoring. When set to \;;11111 it wakes up every few seconds to listen for pages from the system. When set to iWIIII$fi it does not wake up to receive remote start or alarm trigger pages. Note: When «,,..t responses are still received when a command is performed but alarm trigger pages will not be received. Page Alert Options: \fu"I;;"f;~,~_~,v;"1-fj,~_"'wl There are several ways for the Responder LC to alert you when it has received a message from the system. %1111',..,\ will alert by both emitting tones and vibrating the re- mote. Select r%_:J to be alerted by tones that are unique for each message. Select tt_t,;~ and the Responder LC will silently alert you with a gentle vibration, or selectt,RI.::_i$ when you don't want to be interrupted. The text field can be set to display the information you prefer dur- ing remote start. r;~_!j:J: Remote Start Runtime, l:l_:jj: vehicle interior Temperature, or the ~_ will be displayed in the text field while Remote Start is on. © 2009 Directed Electronics. All rights reserved. 25

about to expire. When set tOI)N1 an alert is generated when the Remote Start Time-out message is received. When ).,.. I no alert output is emitted for the message. (ar 2 Options: OFf, ON I HOME This remote can control two systems independently. When set to ••t>, the Car2 select option is not available. When set tot. the remote can be set to control 2 systems. The •••, option is for pairing to a home security system. Screen Color opti0 ns: OfF I WHITE I 1T GIN, VIOI.ET , AQUA ,RID ,GUIN, aWl The status screen backlighting can be sIMI I or will illuminate with a selected color during output when set to one of the option colors. Temp Unit Options:., C Temperature can be displayed In your choice of temperature scales, Fahrenheit or Celsius. © 2009 Directed Electronics. All rights reserved.

When set to):Mt:, the remote will emit a beep as confirmation of a button press. When set to :,.~:, beeps are not emitted for button presses. System Type Options: ·:?tllC;;~',Y.:' Selects the type of system, namely; Security or Remote Keyless Entry to which the remote has been paired, and adjusts the text and main menu accordingly. This has been pre-set by the factory for your system. Clock Set options: :1.;_;%,1;.'"J Review Displays firmware version Exit Exits and returns to the main menu Sensor Adiust: If you feel your security system shock sensor is too sensitive or not sensitive enough, it is highly recommended that you contact your au- thorized Directed dealer/professional and have the sensor adjusted for optimized security detection performance. 'n'.' , ., .. o :~ c:6~: .e·'a' ..0-···· •. ' ", ',,'<;:-' "::J . "CIt . © 2009 Directed Electronics. All rights reserved. 27

the vehicle learn each others encrypted identification, securing their communication from intruders. Please note that your remote controls come pre-programmed from the factory. Prepare the vehicle system to be Paired with a new remote 1. Open at least one of the vehicle's doors. 2. Turn the key to the On position. 3. Within 5 seconds press and release 1 time the Control button on the Control Center. 4. Within 5 seconds, press and hold the Control button. The status LED will flash one time and the siren will chirp once to confirm the system is ready for remote pairing. 5. Release the Control button and proceed below. Note: If pairing does not result within 60 seconds, the system will exit and the siren will chirp. Prepare the new remote to be Paired with the system 1. Make sure the remote control is set for the desired Car 1 or Cor 2 operation. 2. Perform the steps under Access menu items section to access the Pair Remote mode. 3. When the remote beeps 3 times and fi_~f# is displayed the remote is ready to pair. 4. Press and hold the eJ button, the siren will chirp once and the remote will emit several tones to confirm successful pair- ing. ~:!_~ is displayed and the remote returns to the main menu. Note: ~~~'Il will be displayed and the remote will stay in the pair mode in case of an unsuccessful pairing. Check the system status and try again. 28 © 2009 Directed Electronics. All rights reserved.

stration tool to show friends or family. Running Demo mode shortens the battery life over time if used excessively • :i~._.fIfAf;~::: The remote vlill display a selection of icons on the status screen without beeps and tones then stop • ~I•••t".}i: The remote will display a selection of icons on the status screen with beeps and tones then stop • %~{l;j'''I•••tj;J;r The remote will display a selection of icons on the status screen without beeps and tones in on endless loop until the battery charger is disconnected. • ~1l_i_.·'g: The remote will display a selection of icons on the status screen with beeps and tones in an endless loop until the battery charger is disconnected. Note: Loop Silent and Loop Sound are not available and will not appear in the Demo Mode menu unless the battery charger is con- nected. Power Off: When an extended period of non-operation is anticipated, turning the power off will preserve the battery charge. Press the f button while _~.,{~ is displayed. The status screen icons clear as the power off tones play, the remote is turned off. To turn the remote on, Press and hold the f button for 3 seconds, the status screen icons refresh as the power on tones play. The remote also turns itself on and begins charging when the battery charger is connected. Exit: To return to normal operation, press the f button while EXIT is dis- played © 2009 Directed Electronics. All rights reserved. 29

Status LED: The Control Center Status LED flashes as a visual indicator that your vehicleJs security system is active. Starter Kill: The Failsafe starter kill relay prevents the engine from starting Note Sensor triggers: The onboard shock sensor can distinguish minor im- pacts from major impacts to the vehicle exterior. Minor impacts causes the system to emit a Warn-away output by chirping the siren and flashing the parking lights for 3 seconds. Major impacts caused for example by a forcible entry attempt, results in a Full Trigger output. The siren sounds and the parking lights flash for 30 seconds or longer. Both Warn-away and Full Triggers send a message to the remote control. Point of entry triggers: Opening the hood or trunk causes a Full Trig- ger output, while opening a Door or turning on the Ignition causes the the siren to chirp 3 seconds before beginning the Full Trigger output. This 3 second delay allows time to disarm and silence the siren in case of accidental trigger. The Full Trigger message is still sent to the remote. Sensor Silent Arm protection Sensor Warn-away and Sensor Full Trigger activations only send mes- sages to the remote, while the parking light flash and siren outputs are defeated. Point of entry triggers will activate the parking light flash, siren, and send messages normally. 30 © 2009 Directed Electronics. All rights reserved.

Sensor Warn-away, Sensor Full Trigger and Point of Entry activations will only send messages to the remote l with parking light flash and si ren outputs defeated. Sensor Warn-away Messages When the remote receives a Sensor Warn-away message it emits 10 beeps (if on) and displays a sensor zone specific~._."': text for 30 seconds. Warn-away messages cannot be reviewed or displayed in reports. Full Trigger Messages A Full Trigger message generates a Full Trigger output of siren tones and zone specific ,;i~~_!¥~\ text followed by an alert that consists of 1 long beep per minute for 10 minutes. To stop the output and alert, press a command button to perform a command l or Press the f button. Emergency Override The following procedure disarms the system when a programmed re- mote is not available. Number of presses _ 1. Turn the ignition On. 2. Press the control button on the Control Center the correct number of times (the default is 1 press). 3. After a few seconds the siren output ceases and the system is disarmed. Note © 2009 Directed Electronics. All rights reserved. 31

When armed by remote command the system runs a status check of the alarm trigger zones. Faulty zones (usually caused by dome light delay or open trunk) are bypassed and reported via the control center LED and remote, 'vvhile all other trigger zones remain active and are monitored to protect the vehicle. Should a faulty zone self correct (dome light turns off) it becomes active and is then monitored normally. The siren chirps once again a few seconds following the arming chirps as an audible alert, the control center LED flashes in groups to indicate the zone number. The remote will emit a single fault tone and play zone specific text that identifies the faulty zones. Alarm Report when disarming The most recent alarm triggers (if any) are reported when the alarm is disarmed via the remote control, siren chirps, parking light and control center LED flashes. The siren chirps 4 times (or 5 times if NPC On *), the parking lights flash 3 times, and the control center LED flashes in groups to indicate the last two zones that were triggered (see Table of Zones). Theifi0i;%r_Wi wc text is replaced by!!~".111_;!and text identifying the triggers. ! * See Nuisance Prevention (NPC) for more details. ! 32 © 2009 Directed Electronics. All rights reserved.

The Alarm Report displays the two most recent alarm triggers depend- ing on the system state when requested. When disarmed, the report will display text to identify the two most recent triggers since the ve- hicle was last driven. When armed, the report will display text to identify the two most recent triggers since the system was armed. ri Note : Nuisance Prevention (NPC) NPC monitors all alarm zones and, if any are triggered excessively, bypasses them until corrected. If a point of entry (trunk, hood, door) is left open following a forced entry, it is bypassed. It becomes active again only after being closed. Bypassed sensors automatically reset after one hour and after the vehicle is driven. Disarming then re-arming the alarm does not reset bypassed sensors. © 2009 Directed Electronics. All rights reserved. 33

To exit vehicle with engine running The system keeps the engine running during short trips into the house or conven ience store. To perform Pit Stop: 1. With the engine running! set the parking brake and release the foot brake. 2. Press the (:) button, the parking lights will turn on and the ~_ilflll~.Iiil{ message wi II play on the remote control. 3. Turn the key to off, and remove it from the ignition, the engine continues running for the programmed runtime. 4. Exit the vehicle and arm the alarm. I- INote I'----- Key Takeover When you are ready to drive The system keeps the engine running until the vehicle is ready to be driven. To perform Key Takeover: 1. Disarm the system and enter the vehicle, do not step on the foot brake. 2. Insert the key, turn it to the run position, and then step on the foot brake, the remote start then turns off. 3. The parking lights turn off to indicate remote start is off, and 34 © 2009 Directed Electronics. All rights reserved.

message. 4. The vehicle is ready to drive. Remote Start Safe-lock Remote start safe-lock makes sure the doors are locked while the en- gine is running and after, even if they are unlocked when remote start is activated. Door locks may require additional parts and labor. Disabling Remote Start Remote start can be disabled by moving the Toggle Switch to the Off position. If remote start is attempted while Off, the engine will not start. (See Remote Start Error under Remote Start Features) move the switch back to the On position to resume normal operation. Advanced Start The Advanced start features Timer Start and Smart Start will automati- cally start the engine to maintain battery charge or combat extreme cold when parked for an extended period of time. Precautions for the Advanced Start features: • Park the vehicle in a well ventilated area away from windows and doors that lead into inhabited spaces. • Arm and Lock the vehicle, the engine will not start unless the doors are locked. • Only one Advanced start feature can be enabled at any given time. • For manual transmission vehicles MTS mode must be enabled before Ti mer Sta rt or Smart Start ca n be activated. © 2009 Directed Electronics. All rights reserved. 35

Activation begins a countdown timer as set by the installer (de- fault 3 hours). When the timer expires the engine starts and the __~.J message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the _111-.. message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the final start. Smart Start operation Smart Start uses the settings for Timer Start in addition to temperature and battery level to automatically start the engine. Activation begins the countdown timer. When the timer expires the vehicle interior tem- perature and battery level is checked and, if the Temperature is above lOaF, below OF, or the battery level is below 1O.5v, the engine will start and the __.-Ml..? message will be sent to the remote controls. When the Remote start runtime expires the engine shuts off, the f_.~1I1 message is sent to the remote control and the countdown timer restarts. Smart Start is exited after the final start. /Note I Temperature Reporting During Remote start the vehicle interior is checked regularly for tem- perature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep, update, and display the newest temperature information using the Temperature Gauge icon. 36 © 2009 Directed Electronics. All rights reserved.

During remote start a message is sent three minutes before and again at one minute before the engine turns off. The;'I_'la\9< text plays with tones as an alert to reset the runtime if desired. Manual Transmission Start (MTS mode) When installed into a manual transmission vehicle, the system requires that the MTS mode is properly set when parking. If MTS mode is not properly set or is defeated after being properly set the system wi II not t t th . d th '·.·.'I.:.·.•. ~.·•.·lt1•.. ·._.·.:.'.~l•. .-;:j_.'.-.· ..·.-·."T...··.·... t t d t I s ar e engine on e/~~.: .. ,'-: t_;-,:,J~,-_'.,,!c< ex on ones pay as on alert. 1. 2. 3. 4. 5. With the engine running, set the parking brake and leave the engine running. For Pit Stop or Turbo Timer mode (to leave the engine running aher arming) open the driver door. Release the foot broke (if pressed during Step 1L or press and release the foot broke anytime. As long as the engine is running there is no time limit to perform this step. Within 20 seconds of foot brake release, press any command button on the remote, after 20 seconds retu rn to Step 2 (For Turbo Timer Mode, press the optional dash mounted activation button or send the Timer Mode command from the Advanced Start menu screen). The parking lights flash 5 times to confirm MTS mode enable and the remote start activates the ignition outputs. The;.....~~sr..;....J text and beeps ploy to confi rm. Turn Off and remove the key from the ignition switch, the engine . . remains running. ,~.i -\ © 2009 Directed Electronics. All rights reserved. 37

7. The engine turns off and after a few seconds, the ~__.Bi message plays to confirm. If the door is opened inStep 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activa- tion button. 1. With the engine running, set the parking brake. 2. Press the optional dash mounted activation button or perform the Timer Mode command. 3. The parking lights turn on and the remote start activates the igni- tion outputs. The ~,""""'t.ii text and beeps play to con- firm. 4. Turn Off and remove the key from the ignition switch, the engine . . remains running. 5. Exit the vehicle, close all the doors and arm the system. 6. The engine runs for the Turbo Mode runtime. r-:--'-' I Note I 38 © 2009 Directed Electronics. All rights reserved.

For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution. 5 6 7 8 None Brake on Hood open After performing Remote Start command - MTS not enabled After performing Timer Start or Smart Start command Toggle Switch off Alarm is triggered Release foot brake Close hood Enable MTS mode Check all Solutions Turn switch on Disarm or reset alarm * Refers to the number of parking light flashes. © 2009 Directed Electronics. All rights reserved. 39

ing countdown begins. The led flashes qUickly and upon reaching 20 seconds the siren then chirps once. At 30 seconds the system arms itself. Anytime before the system arms you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive arm- Ing resumes. To stay secure in case of occidental disarming the system, if a door is not opened within 30 seconds the system re-arms itself and locks the doors. Auto Re-orming* Auto re-arm ensures the vehicle stays protected if it is not entered aher disarming by remote control. After disarming by remote, the alarm automatically re-arms itself (and locks the doors if programmed on) in 30 seconds. Open any point of entry to stop the re-arm until the next disarm by remote. Onetime Byposs* Turn the ignition On for one to three seconds and then Off. The siren chirps once to confirm one-time bypass is enabled. One-time bypass can be used to temporarily bypass the Passive arm- ing operation for one cycle. It also bypasses the comfort closure and auxiliary channel outputs programmed to activate when arming. After the next disarm all operations return to normal. I: * These featur~s must be turned an by an authorized Directed dealer ] 40 © 2009 Directed Electronics. All rights reserved.

command or manually using the vehicle key and the control button. When entered, the alarm functions are defeated while the conve- nience features still operate normally. Arm and Disarm commands lock and unlock the doors while the I~_~~ text and beeps play to confirm. Use the following steps to manually enter and exit Valet Mode: 1. Turn the ignition switch On and then Off 2. Immediately press and release the control button once 3. The control center LED turns On when entering and Off when exiting. Power Save To reduce power consumption the control center status LED modifies its output if the vehicle is parked for an extended period. If Armed the flashing is reduced after 24 hours. When Valet mode is On the LED will turn off 1 hour and will reset each time the ignition is turned off. Rapid Resume If power is ever disconnected by a mechanic or thief, the system will resume the state it was in at the time of disconnection, when power is reconnected . Automatic Remote Updates The system sends a silent message to all remote controls after any major action has occurred. When the remote receives this message it updates the status screen icons. This way all users are able to quickly review the system status just by accessing the status screen. © 2009 Directed Electronics. All rights reserved. 41

Each time a command is performed the remote will expect a com- mand confirmation from the system. If a command confirmation is not received the out-of-range icon ( ~ ) and a fault tone will playas an alert. No Remote Output Occasionally when a command is performed the remote may not generate a command confirmation output or Out of Range output. This indicates that the system received the command but it was an incomplete command (e.g. Aux button pressed too short to activate the trunk release) or it was an illegal message (e.g. the command was corrupted due to local RF interference). These are temporary nor- mal functions of the system and remote, perform the command again within 10 seconds to return to normal operation. Feature not Available The'i1in.'",V.I'••;:f" message is a generic one which varies in cause and solution depending upon the command used: 42 Runtime Reset Sensor BYf.?ass Defroster Remote Start is Off System is not armed Remote Start is Off. Not configured for this. Only available when Remote Start is On Only available when system is armed Only available when Remote Start is On. Only available when configured for Defroster control. © 2009 Directed Electronics. All rights reserved.

~ (I with multiplier in top row implies button presses) '< © 2009 Directed Electronics. All rights reserved. 43

The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LC remote. Siren chirps and parking light flashes are used to indicate that a command has been received and activated as de- scribed in the Basic and Advanced command sections. Accessing Commands Similar to the Responder LC remote, Basic commands are performed when a command button is pressed directly. To perform Advanced Commands press the f button 1 to 4 times to access function lev- els, f x4 in the table for example implies pressing f 4 times. The LED flashes in groups for a few seconds to indicate the level. Press the desired command button while the LED is flashing to perform the command. Buffon Auto lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the f button followed by the 0 button, the buttons unlock and tones play to confirm. Car Select Car 2 must first be turned On (See Remote Features menu under Pro- gramming section below to turn on). Press and hold the f button for 3 seconds. The remote flashes the LED and beeps once or twice to indicate the selected Car is 1 or 2, release the button for Car Select or continue to hold for programming. Release the f button, then press and release while the LED and beeps continue to perform Car Select. Once the car is selected a com- mand can be performed by pressing one of the command buttons. 44 © 2009 Directed Electronics. All rights reserved.

button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To exit; press and release the f button to go back and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited. Sensor Adjust The Bbutton is used for sensor adjustment, to avoid unintended alarm triggers, it is recommenced that an authorized Directed dealer perform all sensor adjustments. Remote Features menu Press and release the :[) button, 2 LED flashes and beeps indi- cate the remote features menu is accessed and can be set. Press buttons indicated below, 1beep and flash turns the feature on, 2 beeps and flashes turns the feature off. • Autolock feature: Press B to turn on/off. • Remote Beeps: Press :[) to turn onloff • Car 2 feature: Press {:} to turn on/off. Remote Learning Press the :~:} button, 3 LED flashes and beeps indicates the remote is ready to program to the system. Per the instruction in Remote Pair under the Main Menu section of this gUide, following step 4 of Prepare the vehicle ~stem to be Paired with a new remote. Press and hold the LJ button, the siren emits one long chirp to confirm the remote has been learned. © 2009 Directed Electronics. All rights reserved. 45

The 1way companion remote is powered by one 3V coin cell lithium battery (PN CR-2032) that will last approximately one year under normal use. 1. Slide the battery cover up by ap- plying equal pressure at its top and bottom (the arrow on the cover indi- cates the direction), remove the cover from the remote control housing. 11-lA!Ifllvl Battery Clip ~ 11-W"'V) ~ == Battery Cover G) RearView CD Battery Replacement 2. Gently pry up on the battery to re- move it from the holder. Insert a new battery into the holder and under the clip with the positive (+1 side up. Replace the battery cover. The re- mote control is now ready for use. 46 © 2009 Directed Electronics. All rights reserved.

The Responder LC and 1way companion remote can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations on each vehicle that has more than one driver. See Owner Recognition follow- ing for details. Owner recognition The system can be configured to recognize the remote used when disarming and change selected features to match the remote users preferences. Memory seat adjustment, siren chirps, passive arming, remote button auto unlocking, alarm output duration can all be custom set for each remote user at the time of installation. Comfort closure Comfort Closure emulates turning the key in the door cylinder or hold- ing the lock button of an OEM keyless entry. It will automatically close the windows and sunroof on vehicles with this type of OEM conve- nience feature. Alarm output duration The length of time the siren sounds can be adjusted from 1 to 180 seconds at the time of installation. Arming and Warn-away chirp control The system Arm, Disarm and Sensor Warn-away chirps can be config- ured for those that prefer a custom silent ala rm operation. © 2009 Directed Electronics. All rights reserved. 47

The door unlocking operation can be configured to emulate an OEM style of driver priority unlocking for added security during disarming. Auxiliary Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today's vehicles. Once a command is performed to activate a convenience feature the Responder LC dis- plays text that matches the feature. The system installer can clarify if any of the below listed features are compatible with your vehicle. • Trunk release • Widows open/close • Left Sliding door open/close • Right Sliding door open/close • Rear Hatch open/close • Sunroof open/close • Audio system • Headlights 48 © 2009 Directed Electronics. All rights reserved.

able battery that can be serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can help maximize your battery's life and usage in providing your Re- sponder LC remote control with many years of trouble free operation. The battery information for the 1way companion remote control can be found in the I-way Companion Remote Control section of this manual. low Battery After a command is performed the Responder LC and 1way com- panion remote controls check their battery level and, when the level requires attention, will begin generating alerts. Once the alerts begin they will continue to command the system for several days but should © 2009 Directed Electronics. All rights reserved. 49

may occur. Low Battery Alerts When disarmina the system usinq a remote with a low battery the \-I I \,.J I siren will emit one additional chirp as an alert. If confirmation chirps are programmed off, the system will still emit one chirp as an alert when disarming. After performing a command, i¥::0l_ffi~ and several beeps play on the Responder LC remote to indicate the battery needs to be cha rged. r-'~--'---' I [Important l ~ Battery Life The Responder LC remote control has many features that make it one of the most unique remote controls on the market today, including su- perior long range communication with the system. The default feature settings provide for excellent battery charge duration. However, to maximize this duration between charges, the following suggestions will help: • Turn the remote Off: When not in use and/or out of range of the vehicle the remote can be turned off in the Main menu. • Turn Paging off: The remote will not wake up to check for mes- sages with Paging off in the Setup Remote menu. Caution! The remote will not receive trigger messages from the system. • Turn Beeps off: The Button beeps can be turned off in the Setup Remote menu. The command beeps still play normally. 50 © 2009 Directed Electronics. All rights reserved.

"q need to dispose of the battery, please do so in accordance ~ with your municipal requirements for battery disposal or re- turn to Directed Electronics at: One Viper way, Vista, CA 92081 (Shipping and/or handling costs are the sole responsibility of the owner/sender and wi II Dot be covered by Directed Electron ics) . ." .••......•...~ ..••.....! ..•.••....•.••...•.•.......•....•.•..••••..•.•..;.•.....• ·,D·..• I( .'""1 i.: ~,. © 2009 Directed Electronics. All rights reserved. 51

Remote Control) Companion Remote (l-way Remote Con- troll Control Center Status LED Control Button Ihe "brain" of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which I monitors your vehicle and controls all of the system's func- tions. A hand-held, remote control which operates the various func- tions of your system and receives messages and pages from the system. A hand-held, remote control which operates the various func- tions of your system but does not provide message display.. The control center contains the system's radio-frequency an- tenna, the control button, and the Status LED. For maximum remote-control range, the control center is usually located at the top of the Windshield, centered near the rear-view mirror. A light used to indicate the status of your system. It is located on your system's Control Center. A small push button located on your system's control center. It is used to override (disarm) the alarm when a remote is not available or to enter or exit Valet Mode. © 2009 Directed Electronics. All rights reserved.

lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency en- ergyand, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. Remote Controls To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated configurations only. The device and its an- tenna must maintain a separation distance of 20 cm or more from the person/s body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a person's hands and its operating configu- rations do not support normal transmissions while it is carried in pockets or holsters next to a person's body. 54 © 2009 Directed Electronics. All rights reserved.

tenna must maintain a separation distance of 20 cm or more from the person's body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device. WARNING! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this de- vice. © 2009 Directed Electronics. All rights reserved. 55

~ use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user's sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST IN- STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV- ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR- AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Manual Transmission Vehicles Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You must read this Owner's Guide to familiarize yourself with the proper procedures regarding manual transmission remote starters. If you have any questions, ask your authorized Directed dealer or contact Directed at 1-800-753-0600. 56 © 2009 Directed Electronics. All rights reserved.

• Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. • Only remote start on a flat surface • Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emer- gency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualified automotive shop biannu- ally. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation gUide. If the vehicle starts in gear, cease remote start operation im- mediately and consult with the authorized Directed dealer to fix the problem. After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation gUide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer. OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN © 2009 Directed Electronics. All rights reserved. 57

ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME- DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN ,A,UTHORIZED Directed DE.A1ER TO REPA,IR OR DISCONNECT THE INSTA.LLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this gUide. This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk. Interference All radio devices ai'e subject to interference which could affect proper performance. Upgrades and Batteries Any upgrades to this product and/or installation of batteries must be performed by an authorized dealer. Do not attempt to perform any unauthorized modifications to this product. Water/Heat Resistance This product is not designed to be water and/or heat-resistant. Please take care to keep this product dry and away from heat sources. Any damage from water or heat will void the warranty. 58 © 2009 Directed Electronics. All rights reserved.

(at Directed's election) with a comparable reconditioned model any Directed unit (hereaf- ter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was profession- ally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the folloWing information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All com- ponents 0 her than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days from the date of purchase to the address listed on the card; the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by aCCident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY © 2009 Directed Electronics. All rights reserved. 59

DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS .A.ND APPLICABLE FEDFRAI lAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER'S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America. Product(s) sold outside of the United States of America are sold "AS-IS" and shall have NO WARRANTY, express or implied. This product may be covered by a Guaranteed Protection Plan ("GPP"). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. Make sure you have all of the following information from your authorized Directed dealer: A clear copy of the sales receipt, shOWing the following: o Date of purchase o Your full name and address o Authorized dealer's company name and address o Type of alarm installed o Year, make, model and color of the automobile o Automobile license number o Vehicle identification number o All security options installed on automobile o Installation receipts 60 920-0003 06-06 © 2009 Directed Electronics. All rights reserved.

Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more information about our products and services. Designed and Engineered in the USA E L E ( T RON I ( 5 G5702V 2009-07 Vista, CA 92081 www.directed.com © 2009 Directed Electronics-All rights reserved

Z'UvzraztL· ELECTRONICS Vista, CA 92081 www.directed.com © 2009 o.rected EJectroocs. All nghts reser'led Directed Electronics is an ISO 9001 registered company. The company behind Pythonill> Auto Security Systems is Directed Electronics. Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology, Directed Electronics is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services. G5702P 2009 07

requires chip version 2.7 or newer 10 program this unit Shutdown Mode Runtime expired Over-rev shutdown Low or no RPM Transmiller shutdown (or optional push bullonl l+l Broke shutdown I·) Hood shutdown Timer mode/Turbo mode/fv\onuol mex::le error * Neutral safety shutdown Low oollery lvoltage mode) Alarm triggered * * WoitotO'start input limed out 8ilwrilers with a date code of 60 or older require on IC upgrode Ipln 998MI. Some bitwrilers with 0 dOle code of 6B do not require the IC upgrode, refer ro lech lip # 111 2 for more informalion I, ...--- -, OATA TO DATA"" See full Installation Guide for more detailed information on this system ~/~-ted.: Such information and more can be 1"tI'l,,&.I-_- - ...-- found online at: E L E ( T RON I C S www.direde<:hs.com Long Term Event History Parking light Flashes 5 flashes Broke wire is active 6 flashes Hood pin wire is active 7 Hashes iV\onuollronsmission mex::le is enabled and not initialized. 8 flashes Neutral safety wire has no ground or the neutral sofety swilch is Off. Timer mode error: Ignition is on or shutdown input is active when activoting timer mode. Turbo mode error: Turbo mode is programmed off, engine is not on or shut- down input is active. i'v'Ionual mode error: MTS mode not enabled. Alarm was triggered during remote start sequence The system stores the lastlwo fuiliriggers in memory. These are not ero.soble. Each time the unit sees a full trigger, the older of the two triggel"s in memory is replaced by the new trigger. To access long term evenl hislory: Note: The Warn Away triggers are nol stored to memory and is nol reported. Startup Diagnostics: If the vehicle fails ro activate the remore start, the remote start roodule will notify you via your Responder LC3 remote control and will flash the park- ing lights on the vehicle to notify you of whot caused the no-start situation. I. With Ihe ignition Off, press and hold the Conlrol bullon Ion Cootrol Cenlel"l. 2. Tum the ignition On 3. Release !he Control oollon. 4. Within 5 seconds, press and release the Control bul1oo. The slotus LED flashes in groups indicating the losl two zones lhot Iriggered the unit for I minule or until the ignition is turned off. Refer 10 table of zones (overleaf on page 2). Remote Start Shutdown/Startup..llioll'gn"'o...sti....csL- _ To perform shutdown diagnostics: 1. With the ignition Off, press and hold the Control button ton Control Center). 2. Tum the ignilioo On and then oock Off while holding the Control button. 3. Release the Control bullon. 4. Press and release the Control button. The status LED flashes to report the last shutdown for one minute 01 until the ignition is turned on, as shown in the follOWing table: Slctus lED Flashes I flash 2 flashes 3 flashes 4 flashes 5 flashes 6 flashes 7 flashes 8 flashes 9 flashes 10 flashes II flashes Initializing Virtual Tach (not needed with hordwire tach inputs) Virtual Tach handles disengaging the starter motor during remote starting - it does not address over-rev. If the customer wonts to have the over"rev protection capability, the tach wire must be connected To program Virtual Tach: 1. Mel" Ihe insklll is complete, remote start the engine. The programming op- emlion may require 3 cranks of the starter befOle the engine slorts and runs. Do nol turn off fhe remote start if this happens, il is a normal programming operation. 2. Once the engine begins running, let il run for otleost 30 seconds. 3. Using the Remote, send the Remote starl command to turn remale start off. Virtual Tach is programmed. To reset Virtual Tach, go into the Remote Pairing section of this gUide and press/re- lease the Control button 4 times for step #4, then press and hold the Control bullon to resel Virtual Tach. Virtual Tach cannot be reset with the Bilwriter. Learning the Tach (not needed with Virtual Tach) Adjusting the Sensor To learn the loch signal: I. Start 'he veh;c1e wHh lIle key. 2. Within 5 seconds, press and hold the Control button. 3. Mer 3 seconds the status LED on your Cootrol Center lights constant when the loch signal is learned. 4. Release the Control bullon. Note: Virtual Tach cannot be used in MTS Manual Transmission iVIode. It is also not recommended for diesel trucks. SlO'''LED-~ c:J Important! The vehicle system must be di.sormed and the vehicle doors, hood, and trunk should remain clased and ignitioo off or the unit will exit adiusl mode prema- turely. Adiusting the sensor: 1. Press and hold the f button far 8 seconds, the remote will emit 1 long beep and MAIN MENU will appear in the Text Display. (If Cor 2 is on, ignore the Car Selec' beep oher 3 secondsl. 2. Release the f button. The remote enters the fv'\oin Menu and SETUP REMOTE appears in the display. 3. Press and release the {:') button. SENSOR ADJUST appears in the display. 4. Press and hold the f button for 1 second. The system will emit 1 long siren chirp when it enters adjust mode. The remote will beep 3 times and current setting will appear in the displ~ 5. Press and release the {:') or eJ buttons to adjust the setting up/down then press the f button to send the setting to the system. 6. Aher each adjustment, the sensor sensitivity can be tested by cautiously impact- ing the vehicle with increasing intensity. When the siren chirps, the test impact has reached the level reqUired to fully trigger the alarm. 7. Repeat steps 5 & 6 until the sensitivity is satisfactory. Sensor adjust will be exited by: Pressing the ~ or • button anytime. Allowing more than 30 seconds between steps 4, 5, 6. To exit the shock sensor adjustment mode from the control module: Open on entry point or turn on the ignition, the conrrol module emits one long chirp exiling odjustment mode. Important: Aher successfully learning Virtual Tach, a small minority of ve- hicle starters may over cronk or under cronk during remote start. The Bit· writer can be used fine tune the starter outpultime in 50mS increments to compensate for such an occurrence Installation Points Enhanced Tach Filtering Addition of Aux .d for a lotal of 5 Channel Outputs New 18 pin Harness Improved current capable Aux & OEM Alarm Outputs Enhanced Temperature Reading New Features Hl/Z RED (+)12VDC CONSTANT INPUT H1/1 REOfWHITE (-) 200mA AUX/TRUNK OUTPUT HI/5 BLACK (.) CHASSIS GROUND "1/1 BLACKjWHITE (0) 200mA DOME LIGHT SUPERVISION OUTPUT Ht/4 WHITE/BROWN PARKING LIGHT ISOLATION WIRE - PIN 87a of onboard relay Htfl BROWN (+) SIREN OUTPUT 11/7 BLUE (-) TRUNK PIN/ INSTANT TRIGGER INPUT (N/C OR N/O) 111/1 VIOLET (+) DOOR TRIGGER INPUT HS/I GREEN (-) DOOR TRIGGER INPUT (N/C OR N/O) "1/tO WHITE/BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT Quick Reference Install Guide Security and Remote Start Responder lC3 1 10 ' a 7 ':11 Remate Start, (HJ) IO-pin cannectar ::r I I I J: IUfI PINK (+) lGNmON 1 INPUT/OUTPUT IIJ/2 REDfWHITE (87) FLEX RELAY INPUT (30A fUSED) IIJ/2 ORANGE (+) ACCESSORY OUTPUT lIJ/4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL) 1IJ/5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL) lIJ/' REO IGNmON 1 INPUT (30A FUSED) lIJ/1 PINK/WHITE (30) FLEX RELAY OUTPUT lIJIf PINK/BLACK (87it) flEX RELAY INPUT 10/9 REO/BLACK ACCESSORY/STARTER RELAY INPUT (30A FUSED) HI/IO NC No Connection Hlfll WHITE PARKING LIGHT OUTPUT Hlfl2 ORANGE (0) SOOmA GROUND WHEN ARMED OUTPUT r--l [ D2D jump.,,, Factory sett;ng ;s hodzontal pos;';on. Most Xpresskit modules use this setting, check the r1\ ru Xpresskit installation guide for the specific setting. fJ""=-1 Inl [ On ~ " 0 ~O. • . = ( B i!~ ) !: ":.~ : ~= II .. MlNIATM ,: II - ",~~~~// II rcii'i:i"1l j --------------------------- :~_. t= ~ ~ r, Optional Mux Port ,1 IMPORTANTI Neutral Safety switch must be plugged in utral Safety (for additional sensors) and in the ON position : ON SWItch r RF Port 1 I --------------------- -------- I ~~ ~. Port .. .. .. .... Daar Lock, J-pin connector IT:Il I j Control Center I 1BLUE (-) 500mA UNLOCK OUTPUT ITemperatureI D2D Port (for external 1 Sensor Xpresskit interlace module) 2 I EMPty NOT USED 3 I GREEN (-) 500mA LOCK OUTPUT H2 Harness, IS-pin connector Ir" ''''''""I gaaaaaaaaa, H2fl LIGHT GREEN/BLACK (0) 200mA OEM ALARM DISARM OUTPUT H2/IO DARK BLUE (.) 200mA STATUS OUTPUT H2f2 ORANGE/BLACK (-) 200mA AUX 4 OUTPUT H2/11 PINKfWHITE (-) 200mA FLEX RELAY CONTROL OUTPUT H2/3 GREENfWHITE (-) 200mA OEM ALARM ARM OUTPUT H2/12 • ORANGE (-) 200mA ACCESSORY OUTPUT H2f4 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT H2/13 PURPLE (-) 200mA STARTER OUTPUT H2f5 WHITE/BLACK (-) 200mA AUX 3 OUTPUT H2/14 PINK (0) 200mA IGNITION 1 OUTPUT H2f' WHITEfVIOLET (-) 200mA AUX 1 OUTPUT H2l15 GREY (.) HOOO PIN INPut (NfC OR NfO) H2f1 GREY/BLACK (-) DIESEL WAIT TO START INPUT H2/14 BLUEjWHITE (-) 200mA 2ND STATUS /REAR DEFOGGER OUTPUT H2/' BROWN/BLACK (-) 200mA HORN HONK OUTPUT H2/11 BROWN (+) BRAKE SHUTDOWN INPUT H2ft VIOLET/WHITE TACHOMETER INPUT H2/14 BLACKjWHITE (0) NEUTRAL SAFETY INPUT Wiring Connections Main Harness (HI J, 12-pin cannectar II:"""''''"I[ C1OO90irKled[lectronI(S,AJlnghtsR~.

H2/15 Grey wire Trunk Pin 6 Hood Pin Instant trigger: a heavier impact On board shock sensor detected by the anboard shock sensor Door switch trigger Hl/8 Green or Hl/6 Violet wire Instant trigger: For optional sensors Optional MUX port Ignition trigger H3/1 Pink wire Note: See Owner's guide for more details Remote Pairing 1 Press and hold the f button for 8 seconds until the main menu appears. 2. Press and release the {:) button until I Remote Pair Itext is displayed, 3. Press and release the f button until CE9l!J text is displayed, 4. Press and hold the'" button until tones are played on the LC3 remote. 5. Successful or Failed Pair: The LC3 remote control indicates a successful or foiled pairing on the display. Note: Please see installation gUide for pairing with the l-way companion remote Note: If no remote pairing results, the system will exit after 60 seconds. Ia.hI.ulf Zones A zone is represented by the number of stotus LED floshes used by the system to identify 0 porticulor type of input. Prepare the vehicle system to be Paired with a new remote 1 Open a door 2 Turn the key to the ON position 3. Within 5 seconds press and release the Control bullon on the system's Control Center one time. Within 5 seconds. press and hold the Control button on the Control Center. The status LED will flash one time and the siren will chirp once to confirm the system is ready for remote pairing 5. Release the Control button and proceed below. Prepare the new remote to be Paired with the system Make sure the LC3 remote is set for the desired Cor 1 (Default) or Cor 2 opera- tion Menu 3- Remote start Menu 2- Convenience Options: OFF, ·20° to 7(J' in 10° increments Options: 112/3/4 10 24 in 2 hoor incremenlS Options: OfF, 40° to 130 0 in 1(J' increments Options: 1/213/4 10 24 (Stortsl in incremenls of 2 OptionS: OFF, qv to 125V in 05V increments Feature Menus Default settings ore in bold type. New features ore bold with grey oockground Menu 1-Security To access another feature in the same menu: 1 Press and release the Control button the number of times necessary to advance from the feature yau just programmed to the next one you wont to program Then press the Control button once more and hold it, To select another menu: 1 Press and hold the Control button. 2 After 3 seconds, the unit advances to the next menu and the siren chirps, indi- cating which menu has been acces5ed Once a feature is programmed: • Other features can be programmed within the same menu Another menu can be selected The learn routine can be exited if programming is complete For features with only two options; '" =option I while. = option 2 For leatures with more than two options; '" selects the options in ascending order, while. selects them in descending order Note: Pressing ~~:) button resets the feature to the factory default Open a door. Turn the ignition on, then off Select a Menu. Press and hold the Control button. The number of siren chirps indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2 and 3 chirps for menu 3 4. When the desired menu chirps ore heard. release the Conlrol button. S Select a Feature. Press and release the Control button the number of times corresponding 10 the feature you wish 10 change. Then press and hold one more lime to select the features. 6. Program the Feature, While holding the Conlrol button, you con program the feature using the remote control. H If programming with the Bitwriter®, the learn routine can be locked or un- a locked. If the learn routine has previously been locked, it must be unlocked - with Bitwrite!® . thiS cannot be done manually with the Control button. The Bilwriter®II gives you access to a wider range of systerr: opti?ns. These features and th~iustments that may be programmed are descnbed In the table below. Default settings are in bold type ~ Opl.2 The learn routine exits if any of the following occurs: The open door is closed The ignition is turned On There is no activity lor 30 seconds The Control button is pressed too many times Bilwriter -Only Options ~51emleatures, _ The System Features Learn Routine dictates how the unit operates. It is possible to occess and change masl of the feature settings using the Control button o 2009 Directed Electronks.Allrights ReseNed LAD5702t

trunk. if connected * REMOTE START Press to start your engine * FUNCTION ~ Press to access advanced levels I - 4 * -c---DISARM Press to disarm the security system ARM Press to arm the security system RESPONDER LC3 Model 991 * Buttons are located on the side To unlock the keypad. press f and then ~

- ~ REMOTE CONTROL FUNCTION TABLE "-,... "., Level DIRECT 0 f xl f x 2 f x 3 f x4 « Buncn ACCESS ..J Q ARM/LOCK SILENT SENSOR SENSOR SILENT FULL SILENT (PANIC) ARM BYPASS ARM ARM ~ DISARM/ SILENT REMOTE CAR UNLOCK DISARM VALET FINDER .,-) REMOTE RUNTIME TIMER SMART DEFOGGER • • -- START RESET START START e AUX/ AUX 1 AUX 2 AUX 3 AUX 4 TRUNK f FUNCTION TEMPERATURE RUNTIME ALARM SHIFT CHECK REMAINING REPORT 500-10026 W5702P 2009-OB

o 1 CHIRP • • 514NSoft-Chirp Siren @~­ -• • -ACr WHI E CUT TO DELE TE NE HF Gh 6 ( The 514N Soft-Chirp Siren will chirp 6dB softer than Its full-volume output ThiS means that arming and dIsarming chirps. Warn-Away chIrps. and the first stage of the two-stage progressive door tngger will be GdB qUieter than the Siren's constant output To restore chirps to full volume: Cut the black loop coming from lhe base of the siren. The loop s~loutd be cut as close to the sIren as possible. To delete siren tones: Cut the loops indicated in the diagram above. To delete siren tones 2 through 6: (for EU market) Cut the 5LACKIWHITE wire loop coming from the base of the siren The loop should be cut as close to the siren as possible 2004 Directed EleclrOniCS Inc N514N 1104

II vehicle battery is disconnected, the system may attempt to start when the battery is reconnected or transmitter is used. Press brake to disengage. Check with vehicle owner to determine il hood pin switch or override switch was installed to disengage the system lor service. IMPORTANT SAFETY NOTICE

91817 ·Other patents pending MKG-I 7/00 LADDEIN7 "_~~r"".• .Q~, .....DK..4fIL;;;,@....··JF!IJU;...,r.1lf!!,SWill!~X,L, ..L...,.!.t!.·.·········N"W."ifml~_mH.lJ.~,.IAW •.jjl.Jf.!JlffW'Y'·iW!·~., Australia: Canada: Taiwan: International Patents: 303,223 340,000 352,685 4,383,242 4,897,630 5,193,141 5,534,845 5,798,71 1 5,952,933 This product is covered by one or more of the following U.S. patents:

Security Register your product for: ~ Recall Notifications We contact our customers in case of recall. ~ Owner Verification Registration can serve as verification of your ownership in the event of product theft or loss. ~ Efficient Service Completing this card will help you obtain more efficient warranty service in case there is a problem with your product. Don't forget We know you are busy, but registering is important, quick and easy! Or register online at www.prodregister.com/directed

or register online at www.prodregister.com/directed 1.1.DMr. 2. 0 Mrs. First name 3.0 Ms. 4. 0 Miss Initial last name X F J 0 1 Street ApI. City Stale/Province Zlp/PostBl code E-mail address 2. Your date 01 birth: / Month Year 3. Marital status: 1. 0 Married 2.0 Single 4. Date 01 purchase: / / Warranty PriceNalue Rebate/Promotion Immediate availability Friend/Relative's recommendation Salesperson's recommendation Dealer proximity 16.0 15.0 13. What benefits most inlluenced your decision to purchase this product? (check up to three) 01. 0 Improved security 11. 0 02. 0 Improved convenience 12. 0 03. 0 Improved pertormance 13. 0 04. 0 Compatibility with 14. 0 vehicle 05. 0 Ease of installation 06 0 Style/Design/Color 07. 0 Specialleatures 08. 0 Quality/Durability 09. 0 Increase vehicle value 17. 0 10. 0 Functionality Year Month Day 5. Model number: 6. Name of store where purchased: 12. What lactors mostlnlluenced the purchase? (check up to three) 01. 0 Directed Electronics 10. 0 Rebate/Promotion reputation 11. 0 Style/Design/Color 02. 0 Brand reputation 12. 0 Dealer proximity 03. 0 Experience with 13. 0 Friend/Relative's Oirected product recommendation 04. 0 Experience with dealer 14. 0 Salesperson's 05. 0 Value/Price recommendation 06. 0 Warranty 15. 0 Ease 01 installation 07. 0 Special features 16. 0 Compatibility with 08. 0 Quality/Ourability vehicle 09. 0 Sound board/In-vehicle 17. 0 Other demo yrs. yrs. Spouse 01. 0 02. 0 03. 0 04. 0 05. 0 06. 0 07. 0 08. 0 09. 0 10. 0 11. 0 12. 0 13. 0 Male Female Age yrs. 1. 0 2.0 yrs. 1. 0 2.0 Male Female Age 1.0 2.0 1.0 2.0 20. What type 01 internet access do you use at home? 1. 0 Dial-up 2. 0 Cable 3. 0 DSL 4. 0 Other broadband (e.g. fiber optic, wireless Wi-Max) 5. 0 Satellite 16. Occupallon/Employment status: You (check all thaI apply) ProlessionalfTechnical . 0 Upper managemenVExecutive .. 0 Middle management... 0 Sales/Marketing 0 Clerical/Service worker.. 0 Tradesman/Machine operator/Laborer.. 0 Teacher/Educator 0 Healthcare - Physician/Nurse/Other....... 0 Homemaker.. 0 Military.. 0 Retired 0 Sell employed/Business owner.. 0 Work lrom home office.. 0 21. When new products that have the latest technologies appear on the market, do you or someone in your household: 1. 0 Tend to buy such items as soon as they are available? 2. 0 Tend to wait until the item has been around for a while belore buying? 18. level 01 education: (check highest level completed) 1. 0 Completed high school 2. 0 Completed college 3. 0 Completed graduate school 19. For your primary residence, do you: 1. 0 Own? 2. 0 Rent? 17. Which group describes your annual family income? 01. 0 Under $15.000 08. 0 $75,000-$99,999 02. 0 $15,000-$19,999 09. 0 $100,000-$124,999 03. 0 $20,000-$29,999 10. 0 $125,000-$149,999 04. 0 $30,000-$39,999 11. 0 $150,000-$174,999 05. 0 $40,000-$49,999 12. 0 $175,000-$199,999 06. 0 $50,000-$59,999 13. 0 $200,000-$249,999 07. 0 $60,000-$74,999 14. 0 $250,000 & over 14. What other brands did you seriously consider before making this purchase? 1. 0 No other brands 5. 0 Auto Page considered 6. 0 Compustar 2. 0 Other Directed 7. 0 Prestige Electronics brands 8. 0 Pursuit 3. 0 Code Aiarm 9. 0 Crime Stopper 4. 0 Audiovox 10. 0 Bulldog 15. Nol including youtSelf, what Is the GENDER and AGE (In years) of children and other adults living In your household? 1. 0 No one else in household 2. 0 Child under 1 year .00 Year: VIN ,: Model name: 7. Price paid (excluding sales tax): $ 8. Which Directed Electronics brand did you purchase? 1. 0 Autostart 4. 0 Python 2. 0 Avital 5. 0 Viper 3. 0 Clifford 9. What type 01 product did you purchase? 1. 0 Security system 2. 0 Security system with remote start 3. 0 Remote start system 4. 0 Keyless entry system 10. In what vehicle will this product be used? Vehicle type: 1. 0 Car 6. 0 Motorcycle 2. 0 Truck 7. 0 Boat 3. 0 SUV 8. 0 Motor home 4. 0 Van 9. 0 Other 5. 0 Minivan Make 01 vehicle: A. 0 Bought new B. 0 Bought used C. 0 Leased D. 0 Leased used 11. How did you lirst become aware 01 this product? (check one) 01. 0 Local newspaper 07. 0 Radio commercial 02. 0 Yellow pages 08. 0 Salesperson's 03. 0 Magazine recommendation advertisement 09. 0 Manufacturer's 04. 0 TV commercial website 05. 0 Magazine article/ 10. 0 Retailer's review website 06. 0 Friend/Relative's 11. 0 Internetforum recommendation 12. 0 Other

32. 0 Physical fitness/Exercise 33. 0 Walking for health' 34. 0 Health/Natural foods 35. 0 DietinglWeight control 36. 0 Self-improvement 37. 0 Golf 38. 0 Biking 39. 0 Snowboarding/Snow skiing 40. 0 NASCAR Travel 15. 0 Airline club/Frequent flyer 16. 0 Travel in USA 17. 0 Foreign travel 18. 0 Cruise ship vacations 19. 0 RV vacations 20. 0 Casino gambling Investing and Money 21. 0 Shopping by catalog/mail order 22. 0 Shopping by internet 23. 0 Use credit cards regularly 24. 0 Donate to charitable causes 25. 0 Investments/Money making opportunities 26. 0 Contests/Sweepstakes Cultural/Art events Avid book reading Bible/Devotional reading Gourmet cooking/Fine foods Wines ArVAntique collecting Stamp/Coin collecting Crafts Sewing/Needlework/Knitting 22. To help us understand our customers' lifestyles, please indicate the interests and activities in which you or your spouse enjoy participating on a regular basis. Home Life 01. 0 Grandchildren 02. 0 Home improvementJDo-it-yourself 03. 0 Gardening 04. 0 Own adog 05. 0 Own acat Leisure 06. 0 07. 0 08. 0 09. 0 10. 0 11. 0 12. 0 13. 0 14. 0 Thanks for taking the time to fill out this questionnaire. Your answers will be used for market research studies and reports. They will also allow you to receive important mailings and special offers from a number of fine companies whose products and services relate directly to the specific interests, hobbies, and other information indicated above. Through this selective program, you will be able to obtain more information about activities in which you are involved and less about those in which you are not. Please check here if, for some reason, you would prefer notto participate in this opportunity. 0 Failure to return this card will not diminish your warranty rights. Copyright © 2009 All Rights Reserved .. 540-0070 (A) Please seal with tape. Do not staple. LRDEI006

other correspondence to: Directed Electronics Inc. 1 Viper Way Vista, CA 92081 XFJ01 I···· FirSFClas$-. I· Postage' .... Required .. r·poslOfficewill. ..notdenver withoutproper postage. - E LEe T RON I C 5, INC. PO BOX 174391 DENVER CO 80217-4391 I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I