Tab Wheels Gen 2 Operation & User’s Manual

FAILURE TO READ THIS USER MANUAL MAY LEAD TO SERIOUS BODILY INJURY AND/OR DEATH User Manual

PLEASE READ THE USER MANUAL THOROUGHLY BEFORE OPERATING It is highly recommended to start your first TAB | WHEELS GEN 2 experience with a friend. Having a spotter during initial use will increase your confidence and help you become acclimated to your TAB | WHEELS GEN 2. Always wear the proper safety gear before operating. ENJOY YOUR TAB | WHEELS GEN 2! PLEASE NOTICE: • The original TAB | WHEELS GEN 2 is an Intelligent Personal Mobility Device • Before riding, please read the User Manual carefully, and follow all Safety Precautions • Improper use of this product can lead to property damage, serious bodily injury, and/or death • The information in this User Manual will help you better understand, enjoy and maintain you’re TAB | WHEELS GEN 2 For more information or questions regarding the TAB | WHEELS GEN 2, please contact: TAB USA, Inc. 150 Wood Road, Braintree MA 02184 Ph. No. +1 408-909-6996 [email protected]

1. Product Overview ...................................................................................... .4 1.1 General Information ............................................................................ ...4 1.2 What You Need To Know ................................................................... .…4 1.3 WARNING ............................................................................................ ...4 2. Product Description……………………………………………………………...5 2.1 Description of TAB | WHEELS GEN 2 ............................................ ....5 2.2 Description of TAB | WHEELS GEN 2 Components ........................ ...5 3. Operating Principles ................................................................................... .6 3.1 How TAB | WHEELS GEN 2 Works… .............................................. ..6 3.2 READ THE FOLLOWING INSTRUCTIONS CAREFULLY ………... 6-11 Step 1-Getting Started…………….……..……………………….….….…..6 Step 2-Checking the Display Board……………………..…..................…6 Step 3-Charging Your TAB WHEELS GEN 2………..……………….…..7 Step 4-Safety Gear………………………….………………….……....……7 Step 5-Stepping On…………………………………………….……....……8 Step 6-Staying Balanced…………………………………….……….……..9 Step 7-Riding your TAB WHEELS GEN 2……………………...……………...…..10 Step 8-The Dismount………………………..………………………..……11 4. Remote Control and Special Functions .................................................. 12 4.1 Remote Controller .......................................................................... ..12 4.2 Recalibrating……………………………………………………………...12 5. TAB | WHEELS GEN 2 Safety Precautions– MUST READ ................ .13-16 6. Weight and Speed Limitations……………………………….……………..…17 7. Operating Range……….…………. ............................................................. .17 8. Battery Information and Specifications...… ....................................... ..18-19 9. Charging your TAB | WHEELS GEN 2……………………………………… 20 10. Safety Alerts……………………………………………………………….…….21 11. Inspection, Maintenance, and Storage.……………………...……….…….22 12. TAB | WHEELS GEN 2 Specifications …………………………………..….23 13. Packing List………………………………………………………………....…..23 14. Warranty………………………………………………………...………….…….24 15. Thank You………………………………………………………...……….……..24

1.1 General Information The original TAB | WHEELS GEN 2 is an Intelligent Personal Mobility Device. This device is an intuitive, technologically advanced solution that provides the user personal transportation based on dynamic balancing principles calculating the user’s center of gravity using gyroscope and acceleration sensors. Using the latest technology and production processes, each TAB | WHEELS GEN 2 undergoes strict testing for quality and durability. With it’s lightweight, portable design, ease of use, range, and low carbon footprint, the TAB | WHEELS GEN 2 is the Ultimate Last Mile Solution. 1.2 What You Need to Know Before you first experience your TAB | WHEELS GEN 2, please read the USER MANUAL thoroughly and learn the basics to ensure your safety and the safety of others. It is highly recommended that your initial TAB | WHEELS GEN 2 experience be with a spotter who can assist you in centering your balance. Once you keep your center of gravity even, you will be able to stand on the TAB | WHEELS GEN 2 without moving, similar to standing on the ground. The most important thing to do is stay relaxed and confident. The TAB | WHEELS GEN 2 is very intuitive and senses the slightest motion, so finding your center of balance is key. Step on quickly, confidently, and evenly, but remember to keep your body quiet. Please refrain from flaying your arms, leaning too far forward and/or backwards, or stepping on your TAB | WHEELS GEN 2 unevenly, as this will cause you to lose control and increase your probability of injury. Please follow the detailed directions outlined in the USER MANUAL in Section 3 under Operating Principles. 1.3 WARNING Failure to follow the basic instructions and safety precautions listed in the USER MANUAL, can lead to damage to your TAB | WHEELS GEN 2, other property damage, serious bodily injury, and even death.

2.1 Description of TAB | WHEELS GEN 2 The TAB | WHEELS GEN 2 is a technologically advanced Personal Mobility Device. It has two Wheels that balance and transport the user using battery powered brushless motors. The TAB | WHEELS GEN 2 uses digital gyroscope modules and acceleration sensors to calculate the user’s center of gravity and move the device accordingly. The TAB | WHEELS GEN 2 can move forwards, backwards, turn in either direction or turn in place. The compact footprint and zero degree turning radius allow you to enjoy your TAB | WHEELS GEN 2 both indoors and outdoors. 2.2 Description of TAB | WHEELS GEN 2 Components

A.1 How TAB | WHEELS GEN 2 Works The TAB | WHEELS GEN 2 uses digital electronic gyroscopes and acceleration sensors to control balance and motion intelligently, depending on the user’s center of gravity. The device also uses an intelligent control system to drive the brushless motors that are located within the Wheels. The TAB | WHEELS GEN 2 has a built-in inertia dynamic stabilization system that can help assist with balance when moving forward and backwards, but not while turning. TIP -To increase your stability, you must shift your weight in order to overcome the centrifugal force during turns, especially when entering a turn at higher speeds. A.2 PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY Step 1: Getting Started - Take your TAB | WHEELS GEN 2 out of the box and place it flat on the floor. Press and hold the power button, located on the front of your TAB | WHEELS GEN 2 until you hear beep sound. There are two sensor switches under the pedals of TAB | WHEELS GEN 2, when the user steps on them, the sensors are activated, TAB | WHEELS GEN 2 will automatically adjust to the equilibrium state; when rider get off from TAB | WHEELS GEN 2, sensors are deactivating, and TAB | WHEELS GEN 2 enter into standby mode. Step 2: Checking the Display Board - located in the center of your TAB | WHEELS GEN 2. The Battery indicator lights should be lit, indicating there is power to the device.

TAB | WHEELS GEN 2 is fully charged, the Yellow LED light indicates the power is under 50%, and the red LED light indicates the power is under 20%. When flashing red, please recharge the device right away and please do not operate. • Running Indicator: When the operator triggers the rubber foot mats, the Running Indicator LED will light up, which means that the system enters the running state; when the system has an error during operation, the running LED light will turn red and you will hear the system alert you with a beep. Step 3: Charging your TAB | WHEELS GEN 2 - Make sure the TAB | WHEELS GEN 2 is fully charged before your initial use. For charging instructions, please follow details in Section 8 under Battery and Charging Specifications. Step 4: Safety Gear - Wear all proper safety gear, including, but not limited to a helmet, knee pads, elbow pads, and wrist guards

Place one foot on the Rubber Foot Mat, keeping the instep of your foot where it’s far left the rubber mat (as described below). Otherwise, your device will begin to move, making it difficult to step on evenly with your other foot. When you are ready, shift your weight to the foot already placed on the device and step on with your second foot quickly and evenly (as described in the diagram below). TIP– Stay relaxed and step on quickly, confidently and evenly 1-2. Many people overthink this step, imagine climbing a stair, one foot, then the other. Once your feet are even, try to look up. For more details, please watch the video on how to step on TAB | WHEELS

Step 6: Staying Balanced - Find your center of gravity. If your weight is distributed correctly on the foot mats, and your center of gravity is level, you should be able to stand on your TAB | WHEELS GEN 2, just as if you were standing on the ground. IF NOT, you may feel like you are moving in a particular direction, turning, spinning in place, wobbling back and forth, or simply uncomfortable with the device. NOTE – On average, it takes 3-5 minutes just to get comfortable standing on the TAB | WHEELS GEN 2 and maintaining proper balance. Having a spotter will help you feel more secure. The TAB | WHEELS GEN 2 is an incredibly intuitive device; it senses even the slightest bit of motion, so having any anxiety or reservation about stepping on may cause you to panic and trigger movement that is not otherwise natural to you. The best way to overcome that initial anxiety is by having a spotter. TIP – Stay relaxed, stand evenly, and apply an equal amount of pressure on both sides of the device. Relax your muscles as much as you can. Taking a deep breath and exhaling can help you achieve this. Slightly bending your knees can also help. Once you can stand IDLE and STOP, you are ready for the next step. When you first begin using your TAB | WHEELS GEN 2, the fastest way to move in your desired direction is to focus in that direction. You will notice that just thinking about which way you would like to go will shift your center of gravity, and that subtle movement will propel you in that direction.

we learned in Step 6, apply the following general principles to the operation of your TAB | WHEELS GEN 2. / I \ TO MOVE BACKWARDS TO STOP TO MOVE FORWARDS Notice in the diagram above, your center of gravity determines which direction you move, accelerate, decelerate, and come to a complete stop. TIP - Try staying relaxed and focus on finding your center of gravity to maintain full control. Tilt your center of gravity in the direction you wish to move. To turn, focus on the direction you wish to turn and stay relaxed. The more comfortable you get on the TAB | WHEELS GEN 2, the easier you will maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force. For bumps or uneven roads, bend your knees.

be one of the easiest steps, yet when done improperly, may cause you to fall. To properly dismount, from a stopped position, lift one leg up and set your foot back down on the ground (STEPPING BACK). Then step off completely. NOTE - A common error is to try and step forward. TIP – make sure to lift your leg completely off to clear the device when stepping back, otherwise you can get sent into a tailspin.

B.1 Remote Control Please notice in your box the TAB | WHEELS GEN 2 has remote control; its maximum operating range is up to 15 feet (approximately 5 meters). A. Power OFF (A) Button: When the device is power on, press and hold button A for 3 seconds to power o Note- You must press the power button on the actual device to power the TAB | WHEELS GEN 2 back ON. B. Lock/Unlock (B) Button: While the device is powered on, click the B button to lock your TAB | WHEELS GEN 2 (Your battery display will turn red, indicating locked mode). Click the B button again to unlock your TAB | WHEELS GEN 2 (display green/active) Note- after 10 minutes of no activity, your TAB | WHEELS GEN 2 will always power itself off to conserve battery. C. Buzzer or beep sound: Hold the button to make sound out of your TAB | WHEELS GEN 2. 4.2 Recalibrating When the TAB | WHEELS GEN 2 experiences an error, the Running indicator light will remain red, meaning your TAB | WHEELS GEN 2 will not operate until it is properly recalibrated. To learn, how to recalibrate please visit www.tabwheels.com A B C

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR TAB | WHEELS GEN 2, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. 1. Please wear all appropriate safety and protective gear as previously mentioned in the User Manual (Section 3, Page 7) before operating the TAB | WHEELS GEN 2. 2. Make sure to wear comfortable clothes and flat closed toe shoes when operating your TAB | WHEELS GEN 2. 3. Please carefully read the User Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your TAB | WHEELS GEN 2 experience. 4. Before stepping on your TAB | WHEELS GEN 2, make sure it is placed flat on level ground, the power is on, and the Running Indicator light is green. Do not step on if the Running Indicator is red. 5. Do not try to open or modify your TAB | WHEELS GEN 2, as doing so will void your manufacturer warranty, and may cause failure to your device leading to serious bodily injury or death. 6. Do not use the TAB | WHEELS GEN 2 to place yourself or anyone else and their property in d anger. 7. Do not operate the TAB | WHEELS GEN 2 while under the influence of drugs and/or alcohol. 8. Do not operate the TAB | WHEELS GEN 2 when you are restless or sleepy.

situations with your TAB | WHEELS GEN 2. 10. Do not ride your TAB | WHEELS GEN 2 off of curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard or scooter. The TAB | WHEELS GEN 2 IS NOT A SKATEBOARD. 11. Do not turn sharply, especially at high speeds. 12. Do not continuously spin in place, it will cause dizziness and you will fall and injure yourself. 13. Do not abuse your TAB | WHEELS GEN 2, doing so can damage your unit and cause failure to the operating system leading to injury. 14. Do not drive in or near puddles of water, mud, sand, stones, gravel, and debris or near rough and rugged terrain. 15. The TAB | WHEELS GEN 2 can be used on paved roads that are flat and even. If you encounter uneven pavement, please lift your TAB | WHEELS GEN 2 over and past the obstruction. 16. Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads or in extreme heat. 17. Do not ride in or near pools or other large bodies of water. 18. For Bumps and Uneven pavement- Bend your knees when riding on bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance. If you are unsure if you can safely ride on a specific terrain, step off and carry your TAB | WHEELS GEN 2. ALWAYS ERR ON THE SIDE OF CAUTION. 19. Do not attempt to ride over bumps or objects greater than ½ inch even when prepared and bending your knees. 20. PAY ATTENTION- look at where you are riding and be cognoscente of the road conditions, people, places, property and objects around you. 21. Do not operate the TAB | WHEELS GEN 2 in crowded areas. 22. Operate your TAB | WHEELS GEN 2 with extreme caution when indoors, especially around people, property, and narrow spaces like doorways and other narrow spaces. 23. Operate your TAB | WHEELS GEN 2 with extreme consideration for people and property at all times.

or looking at your phone. 25. Do not ride your TAB | WHEELS GEN 2 where it is not permitted. 26. Do not ride your TAB | WHEELS GEN 2 near motor vehicles or on public roads. 27. Do not climb or travel down steep hills with your TAB | WHEELS GEN 2. 28. The TAB | WHEELS GEN 2 is intended for use by a single individual, DO NOT attempt to operate the TAB | WHEELS GEN 2 with two or more people. 29. Do not carry anything while riding the TAB | WHEELS GEN 2. 30. Individuals with lack of balance should not attempt to operate the TAB | WHEELS GEN 2. 31. Women who are pregnant or who may become pregnant should not operate the TAB | WHEELS GEN 2. 32. Young children and the elderly should not operate the TAB | WHEELS GEN 2 without proper instruction and supervision from a Certified TAB | WHEELS GEN 2 trainer. 33. At higher speeds, always take into consideration longer stopping distances. 34. DO NOT step forward off of your TAB | WHEELS GEN 2. 35. Do not attempt to jump on or off your TAB | WHEELS GEN 2. 36. Do not attempt any stunts or tricks with your TAB | WHEELS GEN 2 37. Do not ride the TAB | WHEELS GEN 2 in dark or poorly lit areas. 38. Do not ride the TAB | WHEELS GEN 2 near or over potholes, cracks or uneven pavement. 39. Do not operate your TAB | WHEELS GEN 2 off-road. 40. Keep in mind that you are 4.3in. (11cm) taller when operating the TAB | WHEELS GEN 2. Make sure to go through

42. Do not step on the fenders of the TAB | WHEELS GEN 2. 43. Avoid driving the TAB | WHEELS GEN 2 in unsafe places, including near areas with flammable gas, steam, liquid, dust, fiber, which could cause fire and explosion accidents. 44. Follow all of the state, local, and federal laws in your respective jurisdiction regarding operation of the TAB | WHEELS GEN 2 or similar products. 45. Enjoy your TAB | WHEELS GEN 2 safely and responsibly. If you have any questions and/or concerns, or if you would like more information on safety tips, please feel free to contact the TAB | WHEELS GEN 2 team and visit our website for more information and tips on how to best enjoy your TAB | WHEELS GEN 2 experience. www.tabwheels.com

PLEASE NOTICE- Speed and Weight Limits are set for your own Safety. Please do not exceed the limits listed in the User Manual. 6.1 Weight Restrictions ! Maximum Weight: 265lbs - 120 kg. ! Minimum Weight: 45lbs - 20 kg. 6.2 Speed Limits ! Maximum Speed in Standard Operating Mode: 7.5mph (12 km/h.) 7. Operating Range Please notice the TAB | WHEELS GEN 2 can travel a distance of 8- 12 miles (13-20km) on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your TAB | WHEELS GEN 2. ! Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as well as rough or uneven terrain will reduce your distance significantly. ! Weight: The weight of the user can affect driving distance; a lighter user will have further range than a heavier user. ! Ambient temperature: Please ride and store the TAB | WHEELS GEN 2 under recommended temperatures, which will increase driving distance; battery life, and overall performance of your TAB | WHEELS GEN 2. ! Maintenance: Reasonable battery charging and maintenance will increase the distance. Overcharging the battery can reduce range. ! Speed and Driving Style: Maintaining a moderate speed will increase your distance; while travelling at high speeds for extended periods, frequent starts, stops, idling, along with frequent acceleration and deceleration will reduce your overall distance. 8. Battery Information and Specifications This section is intended to provide you basic information about

ensure you for user safety and to prolong the life of your battery, as well as improve battery performance, please follow these instructions Ø Battery Power: When the Battery Indicator light is green, your battery is over 75% charged; when the Battery Indicator light turns yellow, your TAB wheels is at less than 50% battery capacity, and when the Battery Indicator light turns red, your TAB wheels is at less than 10% battery at this point, please stop operating your TAB | WHEELS GEN 2 and charge your battery 2-3 hours utilizing the charger that you received in your TAB | WHEELS GEN 2 package. To fully recharge your battery please follow the instructions under charging your TAB | WHEELS GEN 2. Ø Battery Specifications Content Parameters Battery Lithium Battery Charging time 2-3h Voltage 36V Initial Capacity 2-4Ah Working Temperature 5°F - 122°F (-15℃~50℃) Charging Temperature 32°F - 104°F (0℃~40℃) Storage Time 12 months Storage Temperature -4°F - 77°F (-20℃-25℃) Storage Humidity 5%-95%

Ø BATTERY WARNING Failure to follow the Safety Precautions listed in the Battery Warning could lead to serious bodily injury and death. Seek immediate medical attention if you are exposed to any substance that is emitted from the battery. ! Do not attempt to modify, change, or replace your battery. ! Do not use your TAB | WHEELS GEN 2 if the battery begins to emit odor, overheats, or begins to leak. ! Do not touch any leaking materials, or breathe fumes emitted. ! Do not allow children and animals to touch the battery. ! The battery contains dangerous substances, do not open the battery, or insert anything into the battery. ! Please only use the charger provided by TAB | WHEELS GEN 2. ! Do not attempt to charge the TAB | WHEELS GEN 2 if the battery has discharged or emitted any substances. In that case, the battery should be abandoned for safety. ! Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium Ion batteries. ! The TAB | WHEELS GEN 2 should only be shipped in its original packaging. ! Do not throw away your box as you need you TAB | WHEELS GEN 2 Packaging for future use.

Step 1: Ensure that the charging port is clean and dry. Make sure that there is no dust, debris or dirt inside the charging port. Step 2: Plug the charger into the wall, then connect the cable with the power supply (100V ~ 240V; 50, 60 Hz), make sure the light on the charger is lit GREEN. Step 3: Connect the charging cable into the charging port of the TAB | WHEELS GEN 2. The indicator light on the charger should change to RED, indicating that your TAB | WHEELS GEN 2 is now being charged. When the RED indicator light on your charger turns to GREEN, then your TAB | WHEELS GEN 2 is fully charged. A full charge typically occurs within 2-3 hours. Step 4: Please unplug the charger from your TAB | WHEELS GEN 2 and from the power outlet. Important Notes about Charging • If the GREEN light on your charger does not turn RED when you plug it into your TAB | WHEELS GEN 2, it could mean you have to check the cables to ensure you have a proper connection; or that your TAB | WHEELS GEN 2 is already fully charged. Push and hold your power button next to the charging port to check the status of your battery in the display. • Do not overcharge, as this will affect the life of the battery. • The best charging temperatures are between 32°F - 104°F (0℃~40℃). Extreme cold and extreme heat will prevent your battery from charging fully. • Make sure to unplug your charger before standing on or operating your TAB | WHEELS GEN 2, as this can be very dangerous. • Use only the TAB | WHEELS GEN 2 charger that you received in your box. • If the TAB | WHEELS GEN 2 is powered on when you enter the plug, the Battery Indicator will begin blinking, if the TAB | WHEELS GEN 2 is powered off when you enter the plug, the Battery Indicator will not blink.

battery during charging. 10. Safety Alerts During operation, if there is a system error or illegal operation performed with your TAB | WHEELS GEN 2, the system cannot enter self-balancing mode, so the device will prompt the user in a variety of ways. You will notice the Running Indicator Light will turn RED and you will hear a beep sound alerting you to take precaution and cease operation. The following are common occurrences where you will hear the Safety Alerts; these notices should not be ignored, but appropriate action be taken to correct any illegal operation, failure or errors. Ø Prohibited riding surfaces (uneven, too steep, unsafe, etc.) Ø When you step on the TAB | WHEELS GEN 2, if the platform is tilted more than 10 degrees forward or backward. Ø Battery voltage is too low. Ø The device is still charging. Ø During operation, the platform self-initiates to tilt due to excess speed. Ø Overheating, motor temperature is too high. Ø The device has been rocking back and forth over 30 seconds. Ø System enters protection mode, the alarm indicator will light up and buzzer will alarm (this typically occurs when the battery is about to die). Ø If the platform is tilted forward or backward more than 35 degrees, TAB | WHEELS GEN 2 will power off. Ø If the tire is blocked, TAB | WHEELS GEN 2 will stop after 2 seconds. Ø When the battery level has depleted below protection mode, the TAB | WHEELS GEN 2 engine will power off after 15 seconds. Ø While sustaining a high discharge current during operation (such as driving up a steep slope for a long period of time), the TAB | WHEELS GEN 2 engine will power off after 15 seconds.

Your TAB | WHEELS GEN 2 requires routine inspection and maintenance. This chapter describes maintenance steps and important operating tips. Before you perform the following operations, ensure the power and charging cable is disconnected. Ø Inspecting and Cleaning your TAB | WHEELS GEN 2 ! Disconnect the charger and turn off your TAB | WHEELS GEN 2. ! Routinely check the body of the TAB | WHEELS GEN 2 and tires for damage or excessive wear. ! Avoid using water or other liquids and cleaners on the TAB | WHEELS GEN 2 for cleaning. ! The TAB | WHEELS GEN 2 is IP 54 rated. It can withstand a light splash of water, however if water or other liquids seep into the device, it will cause permanent damage to the internal electronics. ! Wet a clean cloth with clean soapy water, rinse the cloth thoroughly, and wipe the body of the TAB | WHEELS GEN 2 making sure that water does not get into the power button, charging port, the foot mats, or tires. Ø Storing your TAB | WHEELS GEN 2 ! Fully charge your battery before storing. ! If you are storing your TAB | WHEELS GEN 2 for an extended period of time, please fully charge your TAB | WHEELS GEN 2 at least once every three months. ! If the ambient temperature of the storage location is below 32°F (0 ℃), please do not charge. You must bring the TAB | WHEELS GEN 2 into a warmer environment before charging. Check under Battery Information and Specifications for more details. ! To prevent dust from getting into your TAB | WHEELS GEN 2, try wrapping it or sealing it with its original packaging.

temperature. NOTE -Users who disassemble the TAB | WHEELS GEN 2 will forfeit their right of warranty. 12. TAB | WHEELS GEN 2 Specifications and Packing List Specifications Style Parameter Net Weight 22 lbs. Load 45—250 lbs. Maximum Speed Limit 7.5 mph Range 8-12 miles Max Climbing Limit 30° Turning Radius 0° Battery Lithium-ion Power Requirement AC100-240V/50-60 HZ Dimensions 23in*7.3in*7 inches Ground clearance 1 inch Platform height 4.3 inches Tire non-pneumatic hollow tire Battery voltage 36 V Battery capacity 4.4 AH 13. Packing List Number Product Name Quantity 1 TAB | WHEELS GEN 2 1

www.tabwheels.com Please register your product on www.tabwheels.com for warranty. 15. Thank You Thank you for the purchase of your new TAB | WHEELS GEN 2, and thank for taking the time to read the User Manual. We hope that the information that you obtained from this manual will help you safely operate, maintain and enjoy your TAB | WHEELS GEN 2 for years to come. We appreciate your consideration and sincerely hope you enjoy and share your TAB | WHEELS GEN 2 experience with all of your friends, family members, and loved ones. Thank you and welcome to the TAB | WHEELS GEN 2 movement! ENJOY YOUR TAB | WHEELS GEN 2! ~Team TAB | WHEELS GEN 2