Teleste EASI IP Series Operation & User’s Manual

File Specifications

Brand: Teleste
Category: Network Router
Model: EASI IP Series (Operation & User’s Manual), prSSJ3gwcnJ8k
File Info: Adobe Acrobat PDF (DjVu)
File Size:
Pages: 28 pages

Download PDF

Download Teleste EASI IP Series Manual (28 pages)

Read Online:

Read the Teleste EASI IP Series Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Network Layer: OSI Layer 3

Provides upper layers with independence from the data transmission and switching technologies used to connect systems; responsible for establishing, maintaining, and terminating connections. Respon- sible for routing, switching, and subnetwork access across the entire OSI environment. Ping (Packet InterNet Groper) Ping is a program that “bounces” a request off of another computer over a network to see if the remote computer is still responding. If the ping comes back, the remote computer is still alive. QoS (Quality of Service) Interactive video confe ...

How to Create the STP/RSTP Ring

1. Select which Switch will be your Root/Focal Point Switch to manage the ring. 2. Connect your PC with IP Confi g Tool installed to the Root/Focal Point Switch port 1. 3. Open Teleste IP Confi g Tool and assign a free IP address, which is in the same subnet as the PC, to the “Default IP” and click for button until the Switch(es) appears on the device list. Now all Switches in the same network will appear on the device list. 4. Click on the Switch which is chosen to be Root/Focal Point Switch and tick “Network focal point” box. 5. Restart ...

Creating FRNT v0 Ring

In a FRNT v0 ring confi gure only one IPS switch must be confi gured to be the network Focal Point. The Focal Point switch have the role as Redundancy Manager, and thus be responsible for recovery when a connection between the switches is broken. To set up a FRNT v0 confi guration the following steps must be followed: 1. Connect the switches in a bus topology (do not close the ring before the switches are all confi gured for FRNT 0) 2. Defi ne the Switch, that shall be the network Focal Point 3. Power up the switch and connect this to the network 4. Assign an IP addr ...

Network Layer: OSI Layer 3

Provides upper layers with independence from the data transmission and switching technologies used to connect systems; responsible for establishing, maintaining, and terminating connections. Respon- sible for routing, switching, and subnetwork access across the entire OSI environment. Ping (Packet InterNet Groper) Ping is a program that “bounces” a request off of another computer over a network to see if the remote computer is still responding. If the ping comes back, the remote computer is still alive. QoS (Quality of Service) Interactive video confe ...

The IPS Switch can be confi gured locally and/or remotely via any of the

Ethernet ports. However, port 1 is recommended for management connection. The IPS switches are confi gured with IP Confi g Tool (see page 11). VLAN (up to 7 pcs) A VLAN is a group of end stations with a common set of requirements, independent of physical location. A VLAN has the same attributes as a physical LAN but allows you to group end stations even if the VLANs are not located physically on the same LAN segment. VLANs allow you to group ports on a Switch to limit unicast, multicast, and broad ...

group.” Membership in a host group is dynamic and

there are no topological restrictions to participating in a host group. Hosts groups may be either permanent or transient. Host groups are identifi ed by Class D IP addresses. There are three levels of conformance: 0: no support; 1: support for sending but not receiving; 2: full support. IGMP Querier The device which manages IGMP service. IGMP Querier asks all the devices in a network for possible multicast groups of interest. In a IGMP enabled network where multicast traffi c is being delivered, multicast receivers must join mu ...

Teleste EASI IP Series user guide recommended for: EASI ATM IND2x2 Series, CFO OP-X series, Dual-Band AC3100, EASI, EASI INE101.

⚠️ Download Safety

The Network Router Operation & user’s manual (28 pages) is completely safe to download (last scan date: 02/12/2025).

Related PDF Instructions for Teleste EASI IP Series:

Network Router Equipment: Frequently Requested

Have some Questions about Teleste EASI IP Series Device?

Get valuable and actionable advices from other Teleste EASI IP Series device users. Describe your problem or question, regarding the using of EASI IP Series, in as much detail as possible, and other users will be able to answer you.