A1 Touch AOD 320 Operation & User’s Manual

All In One USER’S MANUAL AOD 320 metal case monitor Contents: 1. Monitor User’s Manual 1.0 Connection to the monitor 1.1 Installation 1.2 Features 1.3 Plug and play function 1.4 Safety Precaution 1.5 OSD (On-Screen-Menu 1.6 OSD Menu 1.7 Specifications 1.8 Contents of the retail package 1.9 Troubleshooting 1.10 Drawing 2. Touch options 2.1 Touchoptions related to monitor size 2.2 4-Wire resistive touchscreen 2.3 5-Wire resistive touchscreen 2.4 SAW touchscreen 2.5 CAP touchscreen 2.6 IR touchscreen 2.7 Optical-Touch 3. Software 3.1 Touchkit 3.2 ELO 4. Mounting 4.1 Plain 4.2 Brackets 4.3 Panel mounting 4.4 Wall mounting

All In One 1.0. Connection To the Monitor • Connect the signal(VGA) cable to the VGA port of computer. Tighten the two thumbscrews by turning clockwise. • You can adjust the connection for your PC environment. • Connect AC cord to the monitor.. • AOD320 is 32" Full HD LCD monitor and support up to 60Hz. • You can adjust brightness, contrast, horizontal & vertical positions by OSD menus and use auto adjust function for instant adjustment. • High-qualified LCD Controller inside • Compact space saving design and power saving mode • 100% compatible with Windows PC environment without the installation of driver CD or software program. 1.1. Installation 1.2. Features 1.3. Plug and Play Function AOD320 can be installed and connected automatically to any computer systems without driver CD or software programs. Monitor will recognize the optimized value of video mode by DDC(Display Data Channel) method that makes the graphic card of computer to communicate with the monitor. AOD320 supports VESA DDC 1/2B. 1.4. Safety Precaution We strongly recommend that you carefully read this User’s Manual before operating your LCD monitor. FOLLOW INSTRUCTIONS in this manual. Please read and comprehend all using directives before use this machine. ● Power — Use the type of power indicated on the marking label. ● Adapter — Only use an adapter designed of the LCD monitor. ● Plug — Do not remove any of the prongs of the monitor's three-pronged power plug. — Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time. ● Power and extension cord — Use the proper power cord with ground conductor — Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 7 amperes. — Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. ● Care and maintenance — Slots and openings in the cabinet are provided for ventilation. Do not block or cover these openings. — Do not push objects of any kind into cabinet slots or openings. The screen surface is easily scratched. — Do not use paper towels to clean the display. Avoid touching it with your fingers, pens, or pencils. — Turn off the AC adapter and the monitor over long periods when not in use.

All In One 1.5. OSD (On-Screen-Menu) menu select down up power Button Function Status POWER Power ON or OFF ON/OFF LED Indicate working status Green : On Red : Stand-by Orange : No signal UP Launch OSD Menu or Add Value Move to OSD Menu DOWN Launch OSD Menu or Down value Move to OSD Menu SELECT Select OSD Menu MENU On / Off OSD Menu 1.6. OSD Menu OSD Menu Description Remarks Brightness Adjust the brightness of the screen Contrast Adjust the contrast of the screen H.Position Adjust the horizontal position of the screen's image V.Position Adjust the vertical position of the screen's image Phase Adjust the focus of the screen's image Clock Adjust the horizontal size of the screen's image Auto Adjust Automatically adjust the Horizontal position, Vertical position, Horizontal size, and Phase Window's background or characters should be displayed on your Full screen prior to proceed this function Color Temp User Reddish Bluish Control the temperature of the color Red Green Blue Auto Color Adjust the color balance of the screen Control the intensity of the color of the screen’s image (Usable when Color temperature is USER mode.) Only usable on Analog Mode Color Only usable on Analog Mode Picture

All In One 1.7. Specifications Language English French German Spanish Italian Korean Japanese Select one of the seven language OSD H.Posi. Select OSD MENU horizontal position OSD V.Posi. Select OSD MENU vertical position OSD Timer OSD MENU disappear from over the screen after setting time Transparency Adjust the transparency of the OSD menu Language English German French Spanish Korean Select one of the seven language Recall Initialize the current mode & setting value Analog Analog signal(RGB) Digital DVI digital signal Audio Audio ON/OFF select Volume Adjust volume level Input Select Misc. Usable on all Mode. OSD Black pouwdered cover. Model: 32 inch XGA TFT LCD Monitor Type: 32" Color Active Matrix TFT LCD Resolution (max): 1920 x 1080 (16:9) FULL HD Color: 16,7 miljoen Pixel: 0.170 x 0.510 mm Brightness: 500 cd/m2 Contrast ratio: 1000:1 Viewing angle: 88°/88°&88°/88° Respons time 18 ms Active area: 697,6 (H) x 392,2 (V) mm VGA input Analog RGB (D-Sub 15-pins) Plug and play: Yes DDC1 /DDC2B Power: 24 Volts. included adapter Power consumption: <140 watt max. Power consumption stand by: <10 watt max. Temperature opration mode: 0 °C - 50 °C Humidity operation mode: 10% ~ 85% R.H. Size 785x475x88mm (wxhxd) Weight 21 Kg Mounting: VESA 200x100mm Users Mode: OSD Key Menu / Select / Power / Down / Up Compatibility: VESA / IBM / MAC AOD320 VGA, 32 inch metal case monitor

All In One 1.8. Contents Of the Retail Package Monitor User’s Manual AC/DC Adaptor Power Cord VGA Cable Audio Cable (Option) Touch Driver (Option) Composite Cable (Option) S-video Cable (Option) TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The monitor does not respond after you turn on the system. Make sure that the monitor is turned on. Turn off the power and check the monitor’s power cord, AC adapter, and signal cable for proper connection. Appear the “ No Input the Signal" Check the connecting of the audio cable between the monitor and the computer. Appear the “ Input Not the Supported" Input signal are insuperable, reset the video mode. The appearance is not at the screen center. Use “AUTO ADJUST”, refer to the Controls section. The characters on the screen are too dim or too bright Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust “RGB ADJUSTMENT, refer to the Control section.

All In One 2 Touch Options 2.1 Touch-options related to monitor size Optical 3mm 6mm protected 3mm 6mm Touch 064 O X X X X X X X X 070w O S S X X X X X X 104 O O O O X O O S X 121 O O O O X O O S X 150 O O O O O O O O X 170 O O O O O O O O X 190 O O O O X O O S X 220W X X X X X X X X O 230 X X X O X X X X X 320 X X X O X X X O O 420 X X X O X X X O O O Aviable X not aviable S On demand IR SAW CAP 4Wire 5wire 2.2 Option: 4-Wire-touchscreen Interface USB (standard) RS232 with PS/2 4 wire-touchscreen sensor non glare is standard, glare is option Chemical resistance Acetone, ammonia-based glass cleaners, hexane, isopropyl alcohol, methylene chloride, mineral spirits, turpentine, methyl ethyl ketone Contact bounce less then 10ms Activation force less then 40gr Input modus Finger, glove hand,pen or stilus Surface hardness Meets pencil hardness 3H (per ASTM D3363) Position accuracy (linearity) less then 1,5mm Resolution 4096x4096 Based on controller resolution Operating life 1 >3.000.000 (250gr, 2 activations/sec) Operating life 2 >200.000 (250gr, 4.5mm/sec) Light transmission 75~85% non glare (standard) and 90% glare (option) (per ASTM D1003) 4 wire-controller USB is standard, RS232 with PS/2 of RS232 internal powered is option Power requirement +5V DC(±10%) Power consumption Operating 80mA ~ Max.current 140mA Interface standard USB 'plug-and-play' compatible is standard option RS232 with PS/2 connector is optie option RS232 internal powered controller. is option Electrostatic protection prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact discharges) Touch resolution 4096x4096 Conversion time ~10 ms per coordinate set Support operating system Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista Mac OS 9.X, 10.X, Mac Intel Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X, Kernel 2.6.X: 32 en 64 bits

All In One 2.3 Option: 5-Wire-touchscreen 2.4 Option: SAW-touchscreen 5 wire-touchscreen non glare is standard, glare is option Chemical resistance Acetone, ammonia-based glass cleaners, hexane, isopropyl alcohol, methylene chloride, mineral spirits, turpentine, methyl ethyl ketone Vibration Withstand 0.01 inches amplitude, at a fraquency of 5 to 455 Hz, for a period of 15 minutes in each of the three axes Contact bounce less then 10ms Electrostatic discharge protection withstands 20 discharges of 15kV (pr EN 61000-4-2, 1995) Activation force less then 40gr Input modus Finger, glove hand,pen or stilus Surface hardness Meets pencil hardness 3H (per ASTM D3363) Resolution 4096x4096 Based on controller resolution Position accuracy (linearity) less then 1% Operating life 1 >3.000.000 (250gr, 2 activations/sec) Operating life 2 >200.000 (250gr, 4.5mm/sec) Light transmission 75~85% non glare (standaard) en 90% glare (optie) (per ASTM D1003) 5 wire-controller USB is standard, RS232 with PS/2 of RS232 internal powered is option Power requirement +5V DC(±10%) Power consumption Operating 80mA ~ Max.current 140mA Interface standard USB 'plug-and-play' compatible is standard option RS232 with PS/2 connector is option option RS232 internal powered controller. is option Electrostatic protection prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact discharges) Touch resolution 4096x4096 Conversion time ~10ms per coordinate set Support operating system Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista Mac OS 9.X, 10.X, Mac Intel Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X, Kernel 2.6.X: 32 en 64 bits SAW-touchscreen standard 3mm glass with beveled edge tempered option Break resistance, meets UL-1950, by 6mm heat tempered glass (is option) protected option break resistance,dustproof, waterproof (is option) Chemical resistance Acetone, ammonia-based glass cleaners, isopropyl alcohol, turpentine, methy alcohol, methyl ethyl ketone, toluene, gasoline, kerosine, vinegar Electrostatic discharge protection pr EN 61000-4-2, 1995: meets level 4 (15 kV air /8kV contact discharges) Activation force less then 85gr Position accuracy Standard deviation of error is less then ±1% Life performance >50.000.000 (finger) Input modus Finger or glove hand (rubber, cloth, leather) Surface durability Optical glass surface, Mohs' hardness rating : 7 Light transmission 90% (per ASTM D1003) SAW-controller Supply voltage +5V DC(±5%) Supply current Min 85mA ~ Max 150mA Electrostatic protection prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact discharges) Interface standard USB 'plug-and-play' compatible option RS232 with PS/2 connector, is opton option RS232 internal powered. is option Touch resolution 4096x4096 Conversion time ~15ms per coordinate set Reliability MTBF greater than 300.000 hours Support operating system Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista Mac OS 9.X, 10.X, Mac Intel Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X, Kernel 2.6.X: 32 en 64 bits

All In One 2.6 Option: IR touchscreen 2.5 Option: CAP-touchscreen 2.7 Option: Optical-Touch Touch technology NextWindow optical imaging Touch method Finger, gloved hand, stylus or any pointer Touch activation force No pressure required Glass Recommended tempered clear glass for maximum clarity Luminous transmission >92% for clear glass Touch accuracy ± 2mm (for 40" screen) over 90% of the screen USB reported touch resolution 32767x32767 Responding speed 10ms per coodinate set (max) Typical 15ms (60 updates per second) Power supply 1900 model is USB powered Other models +12VDC, nominal(+11,5V to +12,5V) power adaptor Calibration Simple four-point calibration. No drift Interfaces USB: 1.1 (full speed), HID-compliant, plug-and-play compatible Serial: RS232 DB9 straight through cable to PC. 4,800 Baud to 115,200 Baud Operating systems Windows XP and Vista, Mac OS, Win 2000, Linux. Software No software required for USB-works with Windows native HID mouse driver NextWindow Serial Runtime software required for serial interface NextWindow Touch+ software available for additional utilities Warrenty 1 Year parts and labour IR-touchscreen Chemical resistance Acetone, ammonia-based glass cleaners, isopropyl alcohol, turpentine, methy alcohol, methyl ethyl ketone, toluene, gasoline, kerosine, vinegar Touch activation force no minimum touch activation is required Input modus ever ything bigger than 6,5 (W) x 6,5 (H) Life performance ∞ Supply voltage +5V DC(±5%) Supply current ~ 150mA Interface standard RS232 baud rate: 9600, 8 data bits, 1 stop bit, no parity, full duplex Electrostatic prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV discharge protection contact discharges) Touchpoint density Based on controller resolution, up to 4096x4096 Light transmission Over 90% (per ASTM1003) Conversion time less than20 ms Support operating Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista system Linux: Red Hat 9.0, Mandrake 9.1 CAP-touchscreen standard 3mm glass, glare is standard, non glare is option tempered version (option) Break resistance, meets UL-1950, by 6mm heat tempered glass (is option) Chemical resistance Water, ammonia, isopropyl-alcohol, and similar non-abrasive cleaners do not use chemical solvent,acidic or alkali solutions Input method Finger Active force <10 gr Response time Max. 200ms Ball impact 13,0Ø steel bal 9 gr height=30 cm Surface hardness Surface hardcoat cannot be scratched using any stylus with Mohs rating ≤6 Linearity ±1,5% Surface durability >160.000.000 touches without noticeable degradation Light transmission ≥85% (accordance with ASTM D1003) Supply voltage 5V DC Supply current Min 85mA ~ Max 150mA Interface standard USB 'plug-and-play' compatible option RS232 with PS/2 connector is option option RS232 internal powered controller. is option Touch resolution based on controller resolutionb 4096x4096 Support operating system Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista Macintosh OS9, OSX Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora CoreI &II &III, Yellow Dog 3.x, Kernel2.4.2+, With GUI, Xfree86 4.3+, Kernel 2,3 and above, Command Line Only, Xfree86 3.3 and 4.2

All In One 3 Software 3.1 Touchkit 3.2 ELO By adding a jumper to the A-Touch controller, the whole system becomes ELO-compatible. The touch registration will be realised by ELO-drivers. There are several reasons for doing this: • You are already using application software with “build-in” ELO- drivers. • You are using clients with pre-installed ELO-drivers. • You replace anoriginal ELO-touchscreen with an A1-touchscreen. Then benefit is; you don’t have to install new software in the above mentioned situation. Remark: If you want to change your driver software from touchkit to ELO, or the other way around, you have to de-install the old software completely before installing the new software. Features for Touchkit software Features Calibration Fast full oriental 4 points position Compensation Accuracy 25 points linearity compensation. Draw Test Position and linearity verification Extend Feature 1. Support monitor / display rotation 2. Support multiple monitor / display 3. Support QVGA and Half-VGA function 4. Support edge compensation Controller Setting 1. Support multiple controllers 2. Dynamical add / remove controllers 3. Change Controller interface without reboot. Language Support 10 languages for Windows Mouse Emulator 1. Right / Left button emulation 2. Normal / Click on touch / Click on release mode 3. Auto right button Sound Notification 1. Sound Option ( No Sound / Touch Down / Lift Up ) 2. Frequency adjustment 3. Duration adjustment Double Click 1. Configurable double click speed 2. Configurable double click area OS support 1. Windows 95 / 98 / ME / NT4 / 2000 / XP / Vista Windows XP Tablet PC Edition 2. Windows CE 2.12, 3.0, 5.0, 6.0 .NET 3. Linux ( X Window Version: 3, 4 Red Hat 6.0 ~ 9.0 Mandrake 5.0 ~ 9.1 , Kernel 2.4.X Kernel 2.6.X, 32 en 64 bits ) 4. iMac. OSX, OS9.X, OS10.X, Intel 5. MS-DOS: Support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024 COM port support 1. Support COM 1 ~ COM 256 for Windows and Linux 2. Support COM 1 ~ COM 8 for DOS

All In One 4 Mounting 4.1 Plain 4.2 Brackets 4.3 Panel mounting 4.4 Wall mounting 4.1 Plain 4.2 Brackets 4.3 Panel-mounting Metal case monitor + 2x breakets Metal case monitor + bezel + 2x breakets Metal case monitor