Transcension PC 08 Operation & User’s Manual
Read Online
Read the Transcension PC 08 Operation & User’s Manual online using the built-in PDF viewer.
Text of the manual
PC 08 Effects Switch Panel User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
•� Before�your�initial�start-up,�please�make�sure�that�there�is�no�damage�caused�during�transportation.
•� Should�there�be�any�damage,�consult�your�dealer�and�do�not�use�the�equipment.
•� To�maintain�the�equipment�in�good�working�condition�and�to�ensure�safe�operation,�it�is�necessary��
for�the�user�to�follow�the�safety�instructions�and�warning�notes�written�in�this�manual.
•� Please�note�that�damages�caused�by�user�modifications�to�this�equipment�are�not�subject�to�warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modification to the equipment.
OPERATING DETERMINATIONS
If�this�equipment�is�operated�in�any�other�way,�than�those�described�in�this�manual,�the�product�may�suffer�damage�and��
the�warranty�becomes�void.�Incorrect�operation�may�lead�to�danger�e.g:�short-circuit,�burns�and�electric�shocks�etc.�
Do�not�endanger�your�own�safety�and�the�safety�of�others!�
Incorrect�installation�or�use�can�cause�serious�damage�to�people�and/or�property.
•� Never�let�the�power�cable�come�into�contact�with�other�
cables.�Handle�the�power�cable�and�all�mains�voltage��
connections�with�particular�caution!
•� Never�remove�warning�or�informative�labels�from�the�unit.
•� Do�not�open�the�equipment�and�do�not�modify�the�unit.
•� Do�not�connect�this�equipment�to�a�dimmer�pack.
•� Do�not�switch�the�equipment�on�and�off�in�short�intervals,�
as�this�will�reduce�the�system’s�life.
•� Only�use�the�equipment�indoors.
•� Do�not�expose�to�flammable�sources,�liquids�or�gases.
•� Always�disconnect�the�power�from�the�mains�when��
equipment�is�not�in�use�or�before�cleaning!�Only�handle�
the�power-cable�by�the�plug.�Never�pull�out�the�plug�by�
pulling�the�power-cable.
•� Make�sure�that�the�available�voltage�is��
120-240V�AC~50/60Hz.
•� Make�sure�that�the�power�cable�is�never�crimped�or��
damaged.�Check�the�equipment�and�the�power�cable�
periodically.
•� If�the�equipment�is�dropped�or�damaged,�disconnect�the�
mains�power�supply�immediately�and�have�a�qualified�
engineer�inspect�the�equipment�before�operating�again.
•� If�the�equipment�has�been�exposed�to�drastic��
temperature�fluctuation�(e.g.�after�transportation),��
do�not�connect�power�or�switch�it�on�immediately.��
The�arising�condensation�might�damage�the�equipment.�
Leave�the�equipment�switched�off�until�it�has�reached�
room�temperature.
•� If�your�product�fails�to�function�correctly,�stop�use�
immediately.�Pack�the�unit�securely�(preferably�in�the��
original�packing�material),�and�return�it�to�your�Pro�Light�
dealer�for�service.
•� Only�use�fuses�of�same�type�and�rating.
•� Repairs,�servicing�and�power�connection�must�only�be��
carried�out�by�a�qualified�technician.�THIS�UNIT�CONTAINS�
NO�USER�SERVICEABLE�PARTS.
•� WARRANTY:�One�year�from�date�of�purchase.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
PC 08 Effects Switch Panel User Manual
3
Product overview & technical specifications
A rack�mount�unit�allowing�easy�on/off�control�of�up�to�8�channels�of�lighting�effects.�Illuminated�rocker�switches�
make�this�unit�ideal�for�both�mobile�DJ’s�and�fixed�installation�use.
•�
8�way�switch�panel
•�
8�illuminated�switches
•�
8�x�15A�IEC�outlets
•�
15A�circuit�breaker
•�
Max�load:�15A
PC 08 Effects Switch Panel
Specifications
Power�supply
120-240V,�50/60Hz
Load�capacity
15A�(with�suitable�connector)
13A�(with�UK�mains�plug)
Total�load
240V�-�3600W�MAX
120V�-�1800W�MAX
Dimensions
48�x�484�x�115mm
Weight
1.6kg
Order�code
CONT05
01�-�15A�breaker
02�-�Power�indicator
03�-�On/off�switches
04�-�Labelling�strip
05�-�8�x�15A�IEC�outputs
06�-�Earth�point
07�-�Captive�power�
connection
In�the�box:��
1 x switch panel &
1 x user manual
01
02
05
06
07
03
04
04
1
2
3
4
5
6
7
8
Power Indicator
15A Breaker
8
7
6
5
4
3
2
1
Power Input:
120-240V~50/60Hz
15A MAX LOAD
TOTAL
Operation
This�unit�has�been�designed�to�independently�switch�ON/OFF�up�to�eight�units�via�the�power�sockets�at�
the�rear.�Simply�plug�each�unit�into�the�appropriate�socket�using�the�correct�power.
For�your�protection�the�switch�panel�has�been�fitted�with�a�15A�circuit�breaker�which�will�disconnect��
the�main�power�supply�from�the�outputs�should�you�overload�the�panel�or�if�there�is�a�power�surge.��
To�continue�to�use�the�panel�switch�off�all�8�switches�on�the�front�panel�then�press�the�reset�button�to�
reactivate�the�power.
The�switch�panel�is�also�fitted�with�a�power�indicator�neon�on�the�front�panel.�Should�the�15A�resettable�
breaker�activate,�the�power�indicator�will�fail�to�illuminate.�Press�to�the�reset�the�15A�breaker.
PC 08 Effects Switch Panel User Manual
4
Installation & WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This�marking�shown�on�the�product�or�its�literature,�indicates�that�it�should�not�be�disposed�of�
with�other�household�wastes�at�the�end�of�its�working�life.�To�prevent�possible�harm�to�the��
environment�or�human�health�from�uncontrolled�waste�disposal,�please�separate�this�from�other�
types�of�wastes�and�recycle�it�responsibly�to�promote�the�sustainable�reuse�of�material�resources.
Household�users�should�contact�either�the�retailer�where�they�purchased�this�product,�or�their�
local�government�office,�for�details�of�where�and�how�they�can�take�this�item�for�environmentally�
safe�recycling.
Business�users�should�contact�their�supplier�and�check�the�terms�and�conditions�of�the��
purchase�contract.�This�product�should�not�be�mixed�with�other�commercial�wastes�for�disposal.
Installation
This�switch�panel�may�either�be�used�on�a�level�surface�or�mounted�into�an�appropriate�19”�rack��
cabinet.�For�safety�the�unit�is�best�installed�into�a�secure�area�where�the�cables�cannot�be�pulled��
out�of�the�panel.