Tree MSS-150 Instruction Manual

12.3X12.8inch/315×325mm Net/gross weight 2.1 kg / 3.1kg 4.6lb/ 6.8lb Package Standard carton: 515x415x120 (mm3) 5 Units in one box: 640×430×530 (mm3) Operating Temperature Optimum: 15-30℃ (62-90f) Indicator Power source 4×AA Batteries or AC/DC Adapter 6V /100mA MSS INSTRUCTION MANUAL MSS M-0612

2) Wait for the stable weight to be displayed. 3) Press the HOLD key. The "." hold indicator will turn on. 4) Remove the item from the Scale platform. He item's weight reading will remain on the display. Now you can also select Unit ( Pounds or Kilograms) by pressing [UNIT] key. 5) Quit HOLD function: Once an item is weighed and the hold function is enabled, you want to quit HOLD function, press the HOLD key again to cancel the "." hold indicator and return the Scale to weighing mode. FUNCTION SETTINGS 1. Press and hold [HOLD] key then press [ON/OFF] key to turn on the scale, the display will show A-ON or A-OFF, press [ZERO] key to select on or off (ON means auto power off function activate, OFF means auto power off function inactivate). 2. Press [HOLD] key, the display will show L-ON or L-OFF, press [ZERO] key to select on or off (ON means auto backlight function activate, OFF means auto backlight function inactivate). 3. Press [HOLD] key, the display will show H_ON or H_OFF, press [ZERO], selection display H_ON, this means AUTO-HOLD function active, press [ZERO] again, the display will show H_OFF, this means AUTO-HOLD function inactive. 4. Return to weighing mode. Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the power and the scale return to the weighing mode. 4 PARTS DESCRIPTIONS： ·TOP ·Display 1. ON/OFF: Turn the scale power on/off. 1. HOLD: Press this key to store weight value. 2. UNIT： Select weighing units：kg or lb . 3. ZERO： This key is “Zero” feature if load is below 4% of full capacity or a negative value. 4. TARE: between 0% and 100% is tare function ·BOTTOM Battery Cover AC Adaptor socket 1

Note: Calibration is done in factory. Don't re-calibrate the Scale, unless it is not accurate. Calibration: 1. Turn the scale off. 2. Press and hold [ZERO] key then press [ON/OFF] key to turn on the scale,, the display will show “X00.00”, 3. X is the flashing digit. 4. press [UNIT] key to select calibrationd unit kg or lb 5. Press [HOLD] key the flash digit will move to right; 6. Press [ZERO] key to increase the flash digit. (X is the calibration weight which can be set according to your requirement – we recommend a minimum weight of 50% of full capacity). 7. Press [TARE],the display will show 88888 then the AD value, press [UNIT] key, the display will show flashing calibration weight, place the shown weight on the platform, press [UNIT] key when the stable indicator lights, the display will show ------- and the AD value 8. Now the Calibration is completed. 9. Press [ON/OFF], turn off the power. 10. Press [ON/OFF] turn on the power again. 11. Place the weight on the platform to make sure weighing is correct, if not, repeat above steps. 2 Features： 1. Display options：5 digital LCD 2. Power：AC adapter 6V 100mA or 4xAA Size Batteries 3. Auto back light (selectable) 4. Auto Shut-off (selectable) 5. Auto Hold (Selectable) 6. Beeper(Non-selectable) 7. Operating Temperature：5～35℃ 8. Operating Humidity：25％～95％RH 9. 5Keys： ON/OFF, ZERO, UNITS, TARE, HOLD ZERO This key is “Zero” feature if load is below 4% of full capacity or a negative value UNITS Toggle among KG or LB unit ON/OFF Turns the scale power on/off TARE Press this key to tare weight value HOLD Press this key to store weight value. 10. Zero Range (0 to 4% of full capacity) 11. Tare Range (0 to full capacity) 12. Error Message indication： Err-0 Overload Err-5 Unstable when power on Err-c Calibration code is not enough or operation error. Low battery indication 13 Two calibration weight units : kg , lb. 14. AnyCal calibration software 3