TRENDnet TEW-828DRU Quick Installation Manual
Text of the manual
• AC3200 Tri Band Wireless Router
T E W -828D R U _______________
• Quick Installation Guide (1)
T E W -8 2 8 D R U (V 1 ) /0 2 .0 2 .2 0 1 5
E S P A to L
FRAW^AIS
E N G LIS H
1. Before You Start
Package Contents
• TEW-828DRU
• Quick Installation Guide
• CD-ROM (Utility and User's Guide)
• Network cable (1.5 m / 5 ft.)
• Power adapter (12 V DC, 3.5 A)
Installation Requirements
• A computer with a wired or wireless network adapter and web browser
• Broadband internet
• Installed modem
1
1. Verify that you have an internet connection.
2. Power off your modem.
3. Disconnect the network cable from your modem and your computer.
4. Connect your modem to the TEW-828DRU's internet (WAN) port.
5. Position the antennas as shown for optimal wireless coverage.
6. Connect your computer to one of the wireless router's LAN ports.
7. Connect the power adapter to the router and then to a power outlet. Toggle the power switch to the
“On" position.
8. Power on your modem. Wait until the LEDs indicate that modem is fully functional. For more
information on your modem's LEDs, please refer with your modem's user's guide.
2
9. Verify that the status LED indicators on the front of the router to confirm that the device is fully
functional: Wireless N (Blue), Wireless AC1 (Blue), Wireless AC2 (Blue).
Wireless AC2
Power
Wireless N
USB Ports
Note: It is recommended that you configure the Wireless Router from a wired computer.
9. Open your web browser; the wizard will automatically appear. Select the desired language and then
click Next. If the wizard does not appear, type http://tew-828dru into the address bar of your web
browser, and press enter. Enter your Username and Password, click Login, click Advanced, click
Setup and then click Wizard. You can find the default username and password on the labels on
the top and bottom of the router.
Note: You can also access the device using the default IP address (http://192.168.10.1).
TRENDnet828_2
XXXXXXXXXXXXX
sment Login
ew-828dru
me: admin
jrd: XXXXX *
10. Please wait while the wireless router detects your internet connection.
SETUP WIZARD
Connection Check
CD w#lcome
0
Connection Type
©Connection Setup
pwibpbi
m m m
® “ rnp“
Preset
Wireless Settings
XXXX
3
12. Click Apply.
13. Please wait while changes are being applied. Setup is complete.
Note:
• We have pre-encrypted the TEW-828DRU with a unique Wi-Fi Name (SSID) and Wi-Fi Password
(Wi-Fi key). You can find these pre-configured settings on the labels on the top and bottom of the
router. You will use this information to connect to the router wirelessly. To change the Wi-Fi Key,
refer to the product manual. If the wireless router is reset, the Wi-Fi Name and the Wi-Fi Password
will also reset to factory defaults.
• To log back in to the wireless router's management interface, you will need to know the router's
username and password. You can find the default username and password on the labels on the
top and bottom of the router.
TRENDnetS2S.
(AC/N)
(N/B/G)
TRENDnetS2S_2
XXXXXXXXXXXXX
ew-828dru
me: admin
jrd: XXXXXI
14. Open a web browser and enter a web address (for example www.trendnet.com) to verify that you
have internet connection.
Wireless router installation is now complete.
For detailed information regarding the wireless router's configuration and advanced settings, please
refer to the User's Guide CD-ROM.
Toll Free English Technical Support
US/Canada: 855-373-4741
Hours: Monday-Friday
7:00 AM- 6:00 PM, Pacific Standard Time.
After hours: 866-845-3673
Preset
Wireless Settings
XXXX
4
