Airlink101 AWLC3026T Quick Installation Manual

• Quick Installation Guide Model # AWLC3026T Section 1 Install Utility and Driver Quick Installation Guide 802.11g CardBus Adapter This Quick Installation Guide only provides the basic instructions. For more advanced features, please refer to the User’s Manual in the provided CD. Note: Do not insert the Cardbus Adapter until you have reached the appointed step. For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE or ME CD during the driver installation. Be sure to have your Windows 98SE or ME CD ready. Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and type D:\autorun.exe (where D is the letter of your CD drive) and click OK. Step 1 Insert the Driver & Utility CD into your CD drive and select Install Utility and Driver from the menu. Step 2 Click Next at the welcome screen. Step 3 Click Next to accept the default destination folder.

Continue on Back Step 5 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. Step 4 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 7 Select Install the software automatically and click Next. Step 8 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). For Windows 98SE and ME, select Search for the best driver for your device and click Next. Verify all the check boxes are checked and click Next. Step 9 Click Finish. (Restart the computer for Windows 98SE and ME). Step 6 After your computer is restarted, insert the Cardbus Adapter.

To open the Cardbus Adapter’s utility go to Start > (All) Programs > Airlink101 802.11g CardBus Utility > Airlink101 802.11g CardBus Utility. Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect. Step 2 If encryption is not enabled for the selected access point / router, skip to step 6. Otherwise, enter a Profile Name for your wireless setting and click Next. Step 3 Verify that the Network Name matches the SSID of your wireless network and click Next.

Web Site: www.airlink101.com Section 3 Technical Support Section 4 Step 4 Select the proper encryption setting for your wireless router or access point from the drop-down menu and click Next. Step 8 Verify that you are receiving adequate Signal Strength and Link Quality and that you have been assigned a valid IP address (instead of all 0’s). If all 0’s, please repeat step 1 - 5. Step 5 Follow the on-screen instructions to complete the encryption settings. Click Complete when finished. Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights. *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual data throughput rate. Step 6 You should see a blue circle around the antenna icon indicating a valid connection. Step 7 Go to the Link Information tab and click on the More button.