Benchmark 11147 Owner's Manual

Specifications

Brand: Benchmark
Category: Kitchen Appliances
Model: 11147 (Owner's Manual)
File Type: PDF
File Size: —
Pages: 9

Read Online

Read the Benchmark 11147 Owner's Manual online using the built-in PDF viewer.

Text of the manual

S I L V E R S C R E E N 1 4

S I L V E R S C R E E N 1 4 Professional Popcorn Machine PART NUMBER: 1 1 1 1 1 4 7 1 4 7 115 volts, 60 hz WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State Of California to cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. Electrical ground is required on this appliance. 1. Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. 2. Do not use an extension cord with this appliance. 3. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded. SAFETY INSTRUCTIONS 1. Plug electrical cord into a certified electrical outlet with a corresponding voltage rating as listed on the machine model labels. 2. Always unplug the electric cord when appliance is not in use and before cleaning, adjusting or maintaining this steamer. Do not operate with a damaged cord or plug or after the machine malfunctions, has been dropped or damaged. Use authorized service for examination, electrical or mechanical adjustment or repair. 3 This equipment will be HOT during use and for a short time after it is turned off. BE CAREFUL. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials away from appliance. 4. Extreme caution is necessary when any appliance is used by or near children and whenever the appliance is left operating and unattended. 5. This appliance is not intended for use in wet locations. Never locate appliance where it may fall into a water container. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electrical shock, fire or damage to the appliance. WARNING ELECTRICAL SHOCK HAZARD. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Benchmark USA Inc.

Benchmark USA Inc. ● 25 ● 25--J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864 J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864--312 312--5500 ● 5500 ● F: 864 F: 864--312 312--5505 5505 OPERATING INSTRUCTIONS 1. Clean the machine thoroughly before use and check for any nuts or bolts that may have loosened during shipping of the merchandise. 2. Plug the machine into a properly grounded 120 volt power supply. 3. Install a 50 watt or smaller light bulb in the socket in the chassis (not necessary for operation). For best results use a 50 watt R20 mini flood bulb. 4. Turn on the “POWER” switch. 5. Adjust “DECK TEMPERATURE” thermostat to desired temperature and the warming element in the base will be activated. 6. Turn on “LIGHT” switch and the interior lamp will come on. 7. Turn on the “KETTLE” switch to activate heat to the kettle and wait approximately 5 minutes to allow the kettle to get up to operating temperature. 8. Turn on “MOTOR” switch and the agitating motor will be activated. 9. Using the Lid Lift Handle to open the lid, place 1 ¾ cup of raw popcorn kernels, ½ cup of cooking oil and 1 ½ teaspoons of seasoning salt into the kettle and lower the kettle lid. (use Benchmark USA part # 42004 – Popcorn measure kit) 10. Allow the corn to pop until the popping ceases (3 seconds between pops) then dump the kettle by pulling downward on the handle. 11. For additional batches repeat steps 9 & 10. It will not be necessary to wait 5 minutes since the kettle will already be up to operating temperature. 12. After popping the final batch, turn off the “MOTOR” and “KETTLE” switch. The “LIGHT” and “POWER” switch may be left on during serving to keep popcorn fresh and warm. 13. Allow kettle to cool and then with a damp cloth, wipe any excess oil from the inside and outside of the kettle to prevent burned on oil stains. Use caution as the kettle may still be HOT!. KETTLE CARE CAUTION: NEVER SUBMERGE THE KETTLE IN ANY LIQUID! IT WILL SHORT OUT THE ELECTRONIC COMPONENTS INSIDE OF IT AND VOID THE WARRANTY! 1. Always turn off the “KETTLE” switch after popping the final batch of a session. Leaving it on will burn any residue oil that is left in the kettle. 2. For routine cleaning: After popping the final batch of a session, use a damp cloth to wipe the excess oil from the interior and exterior of the kettle. 3. Benchmark USA kettles are anodized to create an easy cleaning, non-stick surface. However, if excess oil is not removed it will eventually carbonize on the surface. For heavily built-up carbon removal it is recommended to use (Benchmark USA part # 43001 – kettle cleaning kit). CABINET CARE Always unplug the machine from the power supply before cleaning! 1. The Stainless steel bottom tray, old-maid drawer and drop door are removable for easy cleaning in a sink or dishwasher. Use a mild detergent and water. concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

2. Use a standard glass cleaner for the glass panels and corner posts.

Page 2 concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14 OUNCE KETTLE ASSEMBLY

(complete parts list on page 7) concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SILVER SCREEN 14 CHASSIS ASSEMBLY

concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14 ounce kettle

ounce kettle --120 volt 120 volt 4003 4003 Glass channel set Glass channel set 47214 47214 14 14 ounce kettle ounce kettle --240 volt 240 volt 47015 47015 Canopy Canopy 47001 47001 Popper Assembly Popper Assembly 47016 47016 Drawer Drawer 47002 47002 Chassis Assembly Chassis Assembly 47017 47017 Stainless product tray Stainless product tray 47003 47003 Wiring Diagram Wiring Diagram 47018 47018 Stainless drop door Stainless drop door 47004 47004 200 200w Warmer element w Warmer element --120 120 volt volt 47019 47019 Left door Left door 47204 47204 20 200w warmer element 0w warmer element --240 240 volt volt 47020 47020 Right door Right door 47005 47005 Warmer clamp Warmer clamp 4012 4012 Door handle Door handle 47006 47006 Deck Warmer Thermostat Deck Warmer Thermostat 4015 4015 Door magnet Door magnet 47007 47007 Deck Temperature Indicator Deck Temperature Indicator 4020 4020 Door hinge set Door hinge set 47008 47008 15 1500w kettle element 00w kettle element --120 120 volt volt 4035 4035 Termin Terminal box cover al box cover 47208 47208 1500 1500w kettle element w kettle element --240 240 volt volt 47021 47021 Left kettle hanger SS14 Left kettle hanger SS14 1039 1039 Thermostat Thermostat 47022 47022 Right kettle hanger SS14 Right kettle hanger SS14 2001 2001 Power switch Power switch 47023 47023 Lid and Stirrer Crossbar Lid and Stirrer Crossbar 2005 2005 Lamp socket Lamp socket 5003 5003 Lamp Guard Lamp Guard 2006 2006 Kettle socket Kettle socket 47024 47024 114 ounce ket 4 ounce kettle lid tle lid 2007 2007 Kettle plug Kettle plug 47025 47025 114 ounce kettle stirrer 4 ounce kettle stirrer 2008 2008 Kettle pigtail w/plug Kettle pigtail w/plug 47026 47026 Kettle handle for SS14 Kettle handle for SS14 2009 2009 Power cord w/plug Power cord w/plug 5021 5021 Kettle handle complete Kettle handle complete SS8 SS8 2018 2018 120 volt (50/60 hz) gear 120 volt (50/60 hz) gear motor motor 47027 47027 Lid Lift Handle Lid Lift Handle 2028 2028 240 volt (50/60 hz 240 volt (50/60 hz) gear ) gear motor motor 47028 47028 Kettle Gas Spring Kettle Gas Spring 47009 47009 Corner Post Corner Post 47029 47029 Gas Spring Hanger Gas Spring Hanger 47010 47010 Kettle Element Kettle Element Clamp Clamp 5023 5023 Kettle hinge Kettle hinge--pin/clip pin/clip 47011 47011 Chassis Chassis 5025 5025 Kettle lid magnet Kettle lid magnet 47012 47012 Side glass Side glass 47030 47030 114 oz. Kettle jacket 4 oz. Kettle jacket 47013 47013 Front glass Front glass 47031 47031 114 oz. 4 oz. kettle inner kettle inner concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

To Order Parts Contact:

Benchmark USA, Inc. 25-J Brookfield Oaks Dr. Greenville, SC 29607 USA Tel: 877-432-5500 Fax: 864-312-5505 Email: [email protected] Page 7 Three Year Warranty Three Year Warranty THE WARRANTY: Benchmark USA warrants the original purchaser of new food equipment manufactured by Benchmark USA to be free from defects in material or workmanship from the date of the original purchase for a period of three years. WHO IS COVERED BY THIS WARRANTY: The original purchaser who has provided proper proof of the original retail purchase and all other requested information. WHAT IS WARRANTIED: The obligation of Benchmark USA under this warranty is limited to the replacement of any parts or components that in the opinion of Benchmark USA are defective, F.O.B. the factory, or at any other location that Benchmark USA may designate. WHAT VOIDS THE WARRANTY: 1. Any piece of equipment that has been installed, operated or maintained inconsistently with Benchmark USA operating instructions. 2. Any part or component that has been modified, changed or altered from its original configuration. 3. Any electrical component that has been damaged due to submergence in any liquid. 4. Any part or component that has been subject to abuse, misuse, neglect or accidents. concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

EXTENT OF WARRANTY:

Any defective component, part or assembly returned to Benchmark USA will be replaced by Benchmark USA. Benchmark USA will not be responsible for any expenses incurred by the customer under the terms of this warranty, nor shall it be responsible for any damages either consequential, special, contingent, or otherwise; or expenses or injury arising directly or indirectly from the use of a Benchmark USA product. Any component, part or assembly returned to Benchmark USA must be returned at the customers expense along with proof of purchase. Benchmark USA reserves the right to determine whether the terms of this warranty have been properly complied with. In the event that the terms are not complied with, Benchmark USA shall be under no obligation to honor this warranty. Benchmark USA Inc. ● 25 Benchmark USA Inc. ● 25--J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864 J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864--312 312--5500 ● 5500 ● F: 864 F: 864--312 312--5505 5505 concessionstands.com WWW.CONCESSIONSTANDS.COM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Other Kitchen Appliances Manuals