Deco bernette 340 Manual 

1 When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this sewing computer. When the sewing computer is not in use, it should be disconnected from the electricity supply by removing the plug from the outlet. DANGER To reduce the risk of electrical shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this sewing computer from the electrical outlet immediately after using and before cleaning. WARNING To reduce the risk of burns, fire, electrical shock or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this sewing computer is used by or near children and infirm persons. This sewing computer is not intended for use by persons (including children) with reduched physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the sewing computer by a person responsible for their safety. Children should be supervised to ensure that they do not play with the sewing computer. 2. Use this sewing computer only for its inten ded use as described in this manual. Use only attachments recommended by the manu facturer as contained in this manual. 3. Never operate this sewing computer if: � •� it�has�a�damaged�cord�or�plug, � •��it�is�not�working�properly � •��it�has�been�dropped�or�damaged, � •� it�has�fallen�into�water Return the sewing computer to the nearest authorized BERNINA dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the sewing computer with any air vents blocked. Keep ventilation openings of the sewing computer and foot controller free from accumulation of lint, dust and fabric remnants and the like. 5. Keep fingers away from all moving parts. Special care is required around the sewing needle. 6. Always use the BERNINA original stitch plate. The wrong plate can cause needle breakage. 7. Do not use bent needles. 8. Do not pull or push fabric while stitching, this may deflect the needle, causing it to break. 9. Turn power switch to «0» (off) when making any adjust ments in the needle area, such as threading or changing the needle, threading the bobbin or changing the presser foot etc. 10. Always unplug the sewing computer from the electrical outlet when removing covers, lubricating or when making any other user servicing adjustments mentioned in this instruction manual. 11. Never drop or insert any object into any openings on the sewing computer. 12. Do not use the sewing computer outdoors. 13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 14. To disconnect, turn all controls to the off («0») position then remove the plug from the outlet. 15. Do not unplug by pulling on the cord, instead, grasp the plug before pulling. 16. No responsibility will be taken on behalf of BERNINA for any possible damage as the result of misuse of the sewing computer. 17. Under no circumstances should the sewing computer be left unattended when using the embroidery module. 18. This sewing computer is provided with double insulation (except USA / Canada). Use only identical replacement parts. See instructions for servicing of double-insulated machines. SERVICING DOUBLE- INSULATED PRODUCTS In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system and should only be done by qualified service personnel. Replacement parts for a double- insulated product must be identical to those parts in the product. A double insulated product is marked with the words «DOUBLE INSULATION» or «DOUBLE INSULATED». The symbol may also be marked on the product. This sewing and embroidery computer is intended for household use only. SAVE THESE INSTRUCTIONS! ENVIROMENTAL PROTECTION BERNINA is committed to environmental protection. We are increasing the environmental friendliness of our products by constantly improving them in terms of design and production technologiy. If you no longer require this product, please dispose of it in an environmentally responsible fashion according to national guidelines. Do not dispose of this product in your household waste. In case of doubt, please contact your dealer.

1 Welcome 2 Embroidery Computer Overview 4- 6 Getting Ready to Embroider 7- 20 Important Embroidery Information 21- 24 Key Operations 25- 35 Embroidery 36- 40 Lettering 41- 45 Editing and Combining Designs 46- 53 Design Transfer and Compatibility 54- 58 Care and Maintenance 59- 60 Troubleshooting 61 Index 62 Built-in Design Chart Appendix Table of Preset Colors Appendix

4 Name of Parts 1. LCD touch panel 2. Bobbin winder spindle 3. Bobbin thread cutter 4. Spool holder (large) 5. Spool pin 6. Bobbin winding thread guide 7. Thread guide 8. Thread take-up lever 9. Thread tension dial 10. Face plate 11. Thread cutter 12. Needle threader 13. Needle plate 14. Hook cover plate 15. Extension table (accessory box) 16. Hook cover plate release button 17. Start/Stop button 18. Thread Cutter button 19. Pocket for scissors 20. Needle clamp screw 21. Needle 22. Embroidery foot 23. Carrying handle 24. Hole for extra spool pin 25. Bobbin winder stopper 26. Handwheel 27. Design Card slot 28. Design Card (optional accessory) 29. Card eject button 30. USB Stick socket 31. Power switch 32. Machine socket 33. Carriage (for embroidery) 34. Presser foot lifter Caution: •� Always�provide�sufficient�clearance�for�the�embroidery�carriage� behind your machine before starting the machine. •� Do�not�force�to�move�the�carriage�by�hand. •� Return�the�carriage�to�the�idle�position�before�turning�the�power� off. Use the keys Utility and Return Carriage as described on page 25. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 18 20 22 21 34 23 24 25 26 27 28 29 31 32 33 30