DEVA Broadcast DB7000 Quick User Manual

65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria Tel.: +359 56 820027, Fax: +359 56 836700 Email: [email protected], Web: www.devabroadcast.com DB7000 FM Radio Re-Broadcast Receiver Quick User Guide BEFORE YOU USE THIS PRODUCT In order to be able to enjoy all the benefits of owning your new DEVA product, please verify first that the latest software and firmware release were installed. Visit www.devabroadcast.com/downloads recent software and firmware downloads, prior the installation. for the most

easy. Applying these principles, you can simplify the process and save yourself extra time and effort. For more information about the Safety precautions and the Operating environment recommendations please refer to the User Manual. There are two options for access to the WEB Interface of DB7000 FM Radio Monitoring receiver. The first one is through manual identification of the IP address of the device, and the second one is through the Network discovery option (For Windows 7 users only). WEB Interface STEP 3 DB7000 can be operated in three methods. Through the Front panel navigational menu, Device Manager Software or via a standard WEB Browser. For more information about the Front panel navigational menu, please refer to the User Manual which can be found on www.devabroadcast.com/downloads Configuration STEP 2 1. Install the unit on its operation place; 2. Before connecting the AC Power, make sure that the fuse rating is in accordance with the mains supply at your location. DB7000 Power Supply Factory Settings are: 100-240 VAC; 1Amp Fuse.; 3. Connect the antenna cable to the RF antenna input connector located on the rear panel of the device; 4. Plug the headphones into the front panel jack; Connection STEP 1 NOTE: Due to the inability of some WEB Browsers to read the IP address format displayed on the screen of the device, the numbers included in the IP Address must be written without the leading zeros. For example: 192.168.020.095 must be written as 192.168.20.95 Connect the device to a local network or to the Internet by a LAN cable. Through the Front panel navigational menu pressing the “OK” button will enable you to enter the device main menu. Using the "Right" navigational button find the “Status" section located at the end of the menu Press the “OK” Button to enter the “Status Section”.Via the Front panel navigational menu press the “DOWN” button. (A). A This operation will visualize the screen containing information about the IP address of the device. (B) B Manual IP Address Identification STEP 3.1 Open a new WEB Browser and enter the device IP address in the address field then press “Enter” . A window that requires username and password will appear. (For more information refer to Step 4) (C) C

on . The device must be displayed. If not follow the instructions from Step 3.1 or Step 3.2 (1) Network discovery is a network setting that defines whether your computer can see (find) other computers and devices on the network and whether other computers on the network can see your computer. By default, Windows Firewall blocks network discovery but you can enable it. 1. Open Advanced sharing settings by clicking the Start button, and then on "Control Panel". In the search box, type "network", click "Network and Sharing Center", and then, in the left pane click "Change advanced sharing settings"; 2. Select your current network profile; 3. Click Turn on network discovery, and then click Save changes. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Network discovery for Windows 7 STEP 3.2 2 1 Device Accsess STEP 4 The DB7000 provides you with a protected access to the device settings. You can choose between two types of log in: 1. As an ADMINISTRATOR – which will give you full control over the settings (username: admin, password: pass); 2. As a USER – this type of log-in will allow you to monitor the device and choose different stations without applying settings (username: user, password: pass). In order to make the necessary adjustments to the device please log in as ADMINISTRATOR. 4. To access the device open a new Explorer bar and click on . If you have successfully enabled the network discovery option, the device will be displayed. Double click on will open a new WEB browser window requiring Username and password. (For more information refer to Step 4) (1) (2)

how to configure and explore your device. After successful log in the Control Window will look like this: DEVA Device Manager Software STEP 5 DEVA Device Manager is software to control several devices from DEVA's wide range product line. Developed to support an increasing demand for data processing applications for FM Monitoring, DEVA Device Manager is fully compatible with: • DB4004 – DSP-based FM Radio Monitoring Receiver; • DB7000 – FM Radio Re-Broadcast Receiver; • Radio Explorer II – Mobile FM Radio Analyzer; • DB7007 – Advanced FM Radio Re-Broadcast Receiver with IP Audio & MP3 Backup Players. Aimed at facilitating the use of our products, DEVA Device Manager Software is free of charge. The latest release can be found on our website www.devabroadcast.com/downloads or on a supplied CD accompanying the purchased product. In order to avail yourself of all provided by the software advantages, please refer to DEVA Device Manager Software's user manual which could also be found on our website.