Element ELEFS241 Instruction Manual

and keep the munual for future reference. 24" Full HD Digital LED TV

Additional Safety Information 3 Preparations 4 What is Included Front / Rear View Wall Mounting Remote Control Connecting External Devices 9 Operating Your TV 10 Turn On/Off Your TV Setup Wizard Selecting Input Source Channel Selection Volume Adjustment Customizing TV Settings 12 Navigating the On-screen Display Picture Settings Audio Settings Time Settings Setup Menu Lock Settings Parental Control Channel Settings USB Multimedia 21 Listening to Music Viewing Photos Troubleshooting 22 FCC Notes 25 Specifications 25 CONTENTS

instructions in this user guide, especially the safety information below. Electrical Safety •� The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. •� To prevent overload, do not share the same power supply socket with too many other electronic components. •� Do not place any connecting wires where they may be stepped on or tripped over. •� Do not place heavy items on them, which may damage the leads. •� Hold the main plug, not the wires, when removing from a socket. •� During a thunderstorm, or when not using the television for extended period of time, turn off the power switch on the back of the television. •� Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. •� Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally. •� Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Qualified�personnel�must�only�service�this�apparatus. •� To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for long period. •� Do�not�break�open�or�throw�exhausted�batteries�on�a�fire. Physical Safety •� Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2’’) clearance all around. •� Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control. •� To�clean�the�TV�use�a�soft�dry�cloth.�Do�not�use�solvents�or�petroleum�based�fluids. •� Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus�(including�amplifiers)�that�produce�heat. •� Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for your�safety.�If�the�provided�plug�does�not�fit�into�your�outlet,�consult�an�electrician�for� replacement of the obsolete outlet. •� Protect the power cord from being walked on or pinched particularly at plugs. •� Unplug the apparatus during lightning storms or when unused for long periods. •� Refer�all�servicing�to�a�qualified�service�personnel.�Servicing�is�required�when�the� apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped. •� Please always connect your television to a power outlet with protective ground connection. ADDITIONAL SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed. • Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. •� Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus�(including�amplifiers)�that�produce� heat. • Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. •� Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. •� Only�use�attachments/accessories�specified� by the manufacturer. •� Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. •� Unplug the apparatus during lightning storms or when unused for long periods of time. •� Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •� Please keep the unit in a well-ventilated environment. WARNING:�To�reduce�the�risk�of�fire�or�electric� shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to�excessive�heat�such�as�sunshine,�fire�or�the� like. WARNING: The wall socket plug is used as a disconnect device, the disconnect device should be readily accessible. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified�personnel. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non- insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

PREPARATIONS TV Set Remote Control with Batteries User Manual Quick Start Guide Warranty Card PREPARATIONS •� Switch the TV between On / Standby mode. • SOURCE Press to select among different input signal sources. • MENU Display the OSD (on screen display) menu. • CH Press to select a channel. • VOL +/- Press to adjust the volume. Front View MTS SLEEP INFO CH FREEZE CH.LIST ASPECT ADD/ERASE REPEAT USB CC V-CHIP LED The LED light indicates when the LED TV is activated. IR Infraed Receiver. ELEFJ243 INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the munual for future reference. 24" FULL HD Digital LED TV

3. VGA Input 4. PC Audio Input 5. Component input 6. Antenna Input (75Ω VHF/UHF) 7. Headphone output 8. Coaxial Audio Signal Output Socket 9. AV Input Your new TV is heavy, please consult with professional wallmount installer to perform this installation. PREPARATIONS Rear View The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied). Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4*M4 isometric threaded screws (Not Supplied). The screws must not protrude into the TV by more than 10mm, or damage will occur to the internal parts. Wall Mounting PREPARATIONS Remote Control Mute Button Power Button Numeric Buttons Channel Setup Button Picture Mode Button Sound Mode Button Signal Source Button Channel Selection Button CH.LIST Button FREEZE Button Up Button Left Button TV Setup Menu Button Stop Button Play/Pause Button Rewind Button Prev. Button Forward Button Next Button Return Button Information Button Volume Adjust Button AUTO Button ASPECT Button ENTER Button Right Button Down Button Add/Erase Button EXIT Button FAV Button REPEAT Button USB Button CC Button V-CHIP Button Sleep Button MTS Button MTS SLEEP INFO CH FREEZE CH.LIST ASPECT ADD/ERASE REPEAT USB CC V-CHIP 9 2 8 1 3 4 5 6 7 •� If there is light around the TV, the remote control may fail or work abnormally. •� Please remove the batteries from the remote control when not in use for a long period time. •� Actual function for remote control keys prevails. •� To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. 2

Mute and restore your TV sound. 0~9 Select a program (ATV/DTV mode) Enter multiple program channel number , such as 2-1. Return to previous viewing channel. P.MODE Select picture mode: Dynamic/Movie/Natural/User/Standard. S.MODE Select sound mode: Standard/Music/Movie/User. MTS Switch among different audio channels: STEREO/MONO/SAP. SLEEP Set the TV sleep timer: off/5/10…/180/240 min. SOURCE Select among the different input signal sources: TV/AV/Component/ HDMI1/HDMI2/VGA/USB. INFO Display the present screen information such as the current channel and input source. CH+/- Select a channel. VOL+/- Adjust the volume. FREEZE Freeze the picture. CH.LIST Display program list. AUTO Automatically adjust the Horizontal/Vertical position in PC (VGA) mode. ASPECT Select the aspect ratio settings:Normal/Wide/Zoom/Cinema. Allows you to navigate the OSD menus and adjust the system settings to your preference. OK Confirm�the�selection�in�the�OSD�'on�screen�display'�menus. MENU Display�the�OSD�'on�screen�display'�menu. EXIT Exit�the�OSD�'on�screen�display'�menu. ADD/ERASE Add or delete Favorite channels. FAV Display the favorite channel list. USB Access into the USB directly. CC Closed Caption selection: Off/On/CC on Mute. V-CHIP Set up parental control. USB Operation Press to pause or resume the playback. Press to stop the playback and clear the existing memory. / Press to skip between chapters. / Press to adjust the playback speed. REPEAT Press repeatedly to select the repeat mode. PREPARATIONS Remote Control CONNECTING EXTERNAL DEVICES AC~ HDMI2 HDMI1 VGA PC AUDIO Y PB PR RF (75Ω) COAXIAL VIDEO L R USB 5V 500mA Digital Audio System HDMI2

Turning On/Off Your TV Setup Wizard •� Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. •� In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket. •� If you are turning on your LED TV for the first time, you will see the following menu below. •� Please select Home Mode or Standard Mode to continue. Home�Mode�(Energy�Saving)�is�the�default�as-shipped�television�configuration�and�settings.� And�Home�Mode�(Energy�Saving)�is�the�setting�in�which�the�product�qualifies�for�ENERGY�STAR.� Any�changes�to�default�as-shipped�television�configuration�and�settings�would�change� the energy consumption. And enabling certain optional features and functionalities may increase energy�consumption�beyond�the�limits�required�for�ENERGY�STAR�qualification,�as�applicable. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient�products�and�pratices. •� Press�Yes�to�confirm. Note: If you want to change the modes between Home Mode(Energy Saving) and Standard Mode, you can change the setting in the Setup Menu under Display Mode. •� Press the buttons to select your desired mode and press OK button to confirm.� Menu Language Select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Air/Cable Select antenna between Air and Cable. Cable System Select Cable system: Auto, STD, IRC, HRC. Auto Scan Search and store the available channels automatically. Setup Wizard Menu Language Air/Cable Cable System Auto Scan English Cable AUTO Select Move Exit Channel Selection Selecting the Input Source •� Press the SOURCE button on the main unit or on the remote control to display the Input Source list. •� Press the buttons to select your desired input source among: TV/AV/ Component/HDMI1/HDMI2/VGA/USB and then press OK�button�to�confirm. •� Press the CH+/CH- buttons on the main unit or on the remote control repeatedly to select the channel. •� Press the 0-9 buttons on the remote control to select the channel directly. Press "4", and then press OK button to select channel 4. Press "4" and "5", and then press OK button to selecct channel 45. Press "1", "2" and "3", and then press OK button to select channel 123. OPERATING YOUR TV •� Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume. •� If you wish to switch the sound off, press the MUTE button again or the VOL+ button to resume the sound. Volume Adjustment INPUT SOURCE TV AV Component HDMI1 HDMI2 VGA USB

Navigating the On-screen Display Picture Mode Contrast Brightness Color Standard Normal Select Move Exit Picture Audio Time Setup Lock Channel Tint Sharpness Color Temp. Blue Screen On 50 50 50 50 0 Sound Mode Bass Treble Select Move Exit Picture Audio Time Setup Lock Channel Balance Surround Sound Auto Volume SPDIF Type Off On Standard 50 50 0 Audio Language English Air/Cable Auto Scan Favorite Select Move Exit Picture Audio Time Setup Lock Channel Show/Hide Channel No. Channle Label DTV Signal: Cable Sleep Timer Time Zone Daylight Saving Time Select Move Exit Picture Audio Time Setup Lock Channel Off Pacific Off Enter Password Select Move Exit Picture Audio Time Setup Lock Channel ---- Menu Language Transparency Zoom Mode Noise Reduction Select Move Exit Picture Audio Time Setup Lock Channel Advanced Closed Caption DLC On English Off Wide Middle Restore Default •� Press the MENU button to display the main menu. •� Press the buttons to navigate and select the available menus. CUSTOMIZING TV SETTINGS Picture Settings •� Press the MENU button on the main unit or on the remote control then press the buttons to select PICTURE menu and then press the or the OK button to enter. •� Press the buttons to select the following picture options and then press the buttons to adjust each option’s setting. Picture Mode Cycle among picture modes: Standard/Dynamic/ Movie/Natural/User. Alternative: you may press the P.MODE button to select the picture mode directly. Contrast Adjust the difference between light and dark levels in the pictures. (For User mode) Brightness Increase or decrease the amount of white in the picture. (For User mode) Color Control the color intensity. (For User mode) Tint Adjust the balance between red and green levels. Sharpness Adjust the level of crispness in the edges between light and dark areas of the picture. (For User mode) Color Temperature Cycle among color temperature: Cool/Normal/Warm. Blue Screen Allow the blue background to turn On/Off during weak or no signal conditions. Picture Mode Contrast Brightness Color Standard Normal Select Move Exit Picture Audio Time Setup Lock Channel Tint Sharpness Color Temp. Blue Screen On 50 50 50 50 0 Display Mode Home Mode PCM

•� Press the MENU button on the main unit or on the remote control then press the buttons to select AUDIO menu and then press the or the OK button to enter. •� Press the buttons to select the following audio options and then press the buttons to adjust each option’s setting. Sound Mode Bass Treble Select Move Exit Picture Audio Time Setup Lock Channel Balance Surround Sound Auto Volume SPDIF Type Off On Standard 50 50 0 Audio Language English Sound Mode Allow the selection of an audio-enhancement technique: Standard/Music/Movie/User. Alternative: You may press the S.MODE button to select the sound mode directly. Bass Control the relative intensity of lower-pitched sounds. (For User mode) Treble Control the relative intensity of higher-pitched sounds. (For User mode) Balance Adjust the audio output between the left and the right speakers. Surround Sound Provide an enhanced listening experience. Auto Volume Volume levels are automatically controlled. SPDIF Mode Select the digital audio output mode between RAW/ PCM. Audio Language Select audio language among: English, French, Spanish. Audio Settings Sleep Timer Time Zone Daylight Saving Time Select Move Exit Picture Audio Time Setup Lock Channel Off Pacific Off CUSTOMIZING TV SETTINGS •� Press the MENU button on the main unit or on the remote control then press the buttons to select TIME menu and then press the or the OK button to enter. •� Press the buttons to select the following time options and then press the button to adjust each option’s setting. Sleep Timer Select a period of time after which the TV automatically switches to standby mode: off/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Time Zone Select�a�Time�Zone�among:�Pacific/Alaska/Hawaii/� Eastern/Central or Mountain. Daylight Saving Time Select to turn On/Off daylight saving time. Time Settings PCM

•� Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. •� Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. •� Press the buttons to select the following options and then press the buttons to adjust each option’s setting. Change Password Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new�password�for�confirmation. System Lock Select to turn On/Off system lock. The following options (US, Canada, RRT Setting and Reset RRT) will only be accessible when you turn the system lock on. US TV TV RATING: Press OK button to lock or unlock TV rating. MPAA Select MPAA rating among: N/A,G, PG, PG- 13, R, NC-17,or X. Canada Canada English Select MPAA rating for English-speaking Canada among: E, C, C8+, G, PG, 14+, 18+. Canada French Select MPAA rating for Quebec Canada among: E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. RRT Setting Set Rating Region Table. Reset RRT Select to reset the RRT setting. Clear Lock Clear all lock settings. Enter Password Select Move Exit Picture Audio Time Setup Lock Channel ---- Change Password System Lock US Next Move Return Picture Audio Time Setup Lock Channel Canada RRT Setting Reset RRT Clear Lock Off Enter New Password Confirm Password 0-9 Return Picture Audio Time Setup Lock Channel ---- ---- The default password is "0000". Input 4-digit password Lock Settings •� Press the MENU button on the main unit or on the remote control then press the buttons to select SETUP menu and then press the or the OK button to enter. •� Press the buttons to select the following setup options and then press the buttons to adjust each option’s setting. CUSTOMIZING TV SETTINGS Menu Language Select menu language among: English, Français or Español. The default on-screen menu language is English. Transparency Select to turn On/Off transparency function. Zoom Mode Select zoom mode among: Normal/Wide/Zoom/Cinema. Noise Reduction Reduce the noise level of the connected device: Off/ Weak/Middle/Strong. Advanced Adjust the PC desktop content. (VGA source mode only) Closed Caption Allows you to turn closed captioning of audio on or off, select analog or digital modes, or personalize the captioning style. CC Mode Select CC mode among: On, Off or CC on Mute. Basic Selection Select analog mode among: CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4. Advanced Selection Select digital mode among: Service1~6. Option Personalize the captioning style,such as the size and color of the digital caption. DLC Select to turn On/Off the dynamic luminance control. Display Mode Press and then use to select Home Mode and Standard Mode. Restore Default Restore the TV to factory default settings.(Except the lock settings) H-POS V-POS Clock Phase Adjust Move Return Picture Audio Time Setup Lock Channel Auto 50 50 50 50 CC Mode Basic Selection Advanced Selection Option Select Move Return Picture Audio Time Setup Lock Channel CC1 Off Service1 Setup Menu Menu Language Transparency Zoom Mode Noise Reduction Select Move Exit Picture Audio Time Setup Lock Channel Advanced Closed Caption DLC On English Off Wide Middle Restore Default Display Mode Home Mode

buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK�menu.�If�used,�this�option�feature�can�"block''�undesirable�programming�from� appearing on the TV. Parental Control offers the user a wide variety of options and settings that�restrict�or�"block''�the�programming�that�can�appear�on�the�TV.�Parental�Control�allows� the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer. It can be preset and turned either on or off by the user who�specifies�the�secret�4-number�code,�the�password.�The�number�of�hours�blocked�are� specified. General audiences and children blocks should be both programmed into the TV's�memory.�Viewer�ratings�are�specified�for�both�TV�and�the�motion�picture�Industry;�both� rating systems should be used, for complete coverage. The ratings are based on the ages of children. Overview To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus examples below. Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG,�more�restrictive�ratings�will�be�automatically�blocked;�the�viewer�will�not�be�able�to� see: TV-PG,TV-14,or TV-MA rated programming.) Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/VIdeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block program "Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex�Scenes,Violence�Scenes,�or�Fantasy.�Violent�Scenes;�in�Content�Blk�option.�Select�a� secret password, in the Set Password option, using the numbers keys on the remote control. Do not forget the password, it is the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.Do you want the Parental Control to be active at all times? If not, you can turn it on or off with the Lock On/Off option. •� You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time. •� Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources. •� Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources. •� You can not disable Parental Control by disconnecting the TV from power. Block hours will be�automatically�reset�to�the�original�block�time�setting�specified�if�power�is�disconnected. CUSTOMIZING TV SETTINGS Parental Control Motion Picture Association of America (MPAA) Rating System Grade Meaning G General Audiences Content not offensive to most viewers. PG Parental Guidance Suggested Content is such that parents may not want their children to view the program. PG-13 Parents Strongly Cautioned Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program. R Restricted Not for children under 17, strong element of sex and/or violence. NC-17 No children under age 17 Not for children under 17 under any circumstances. Strong sexual content. X Hard Core Films Same as NC-17 rating. No Rating No Rating MPAA Not Rated TV Parental Guideline Rating System Grade Meaning TV-Y All Children Content not offensive to most viewers. TV-Y7 Directed to Older Children Considered suitable for children over 7, may contain fantasy violence scenes. TV-G General Audience Considered�suitable�for�all�audience;�children� may watch unattended. TV-PG Parental Guidance Suggested Suggested unsuitable for younger children, may contain suggestive language, bad language, sex and violence scenes. TV-14 Parents Strongly Cautioned Unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes. TV-MA Mature Audience Only Adults only, may contain strong language, bad language, sex and violence scenes. Canadian Rating: •� Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+). •� Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+). CUSTOMIZING TV SETTINGS The V-Chip will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category, then allthe categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA).

•� Press the MENU button on the main unit or on the remote control and then press the buttons to select CHANNEL menu. •� Press buttons to select the following channel options and then press the buttons to adjust each option’s setting. Air/Cable Select antenna between Air and Cable. Auto Scan Find and store all available channels automatically. •� Allows you to select cable system among Auto/STD/IRC/ HRC before going to auto scan if you choose Cable as input signal. •� It will go straight to auto scan if you choose Air as input signal. Favorite Set the selected channel as one of the favorite programs. Show/Hide Show/Hide the selected channel. Channel No. Display the current channel number. Channel Label Display the current channel label. DTV Signal Display the quality of current DTV signal. Air/Cable Auto Scan Favorite Select Move Exit Picture Audio Time Setup Lock Channel Show/Hide Channel No. Channle Label DTV Signal: Cable Cable System Start to Scan Picture Audio Time Setup Lock Channel AUTO Select Move Return Picture Audio Time Setup Lock Channel RF CH : 50 Found : 0 Next MoveR eturn 50-1 50-2 50-3 Picture Audio Time Setup Lock Channel KOCE-HD Press’OK’Change Move Return Channel Channel Name Favorite KOCE-SD KOCE-LB Channel Settings •� Press the SOURCE button on the main unit or on the remote control then press the buttons to select the USB mode and then press OK button. •� Press the buttons to select PHOTO and then press OK button. •� You can select a background music to play when you view the photos. The music and photo files should be exactly in the same folder. USB MULTIMEDIA •� Press the SOURCE button on the main unit or on the remote control then press the buttons to select the USB mode and then press OK button. •� Press the buttons to select MUSIC and then press OK button. File format supported: MP3 File format supported: JPEG. Operation Tips Press to start or pause the music or photo playback. Press to stop music or photo playback. Press to play the previous track or view the previous photo. Press to play the next track or view the next photo. Press to speed up backward. Press to speed up forward. REPEAT Press to select different repeat mode. Listening to Music Viewing Pictures USB C: Phot usic C:\MP3\ .. U01-1.mp3 U01-2.mp3 U01-3.mp3 U02-1.mp3 Play File :0 Select Move Repeat 001/005 Total size:3.8 GB Unused size:3.7 GB .. Title: Artist: Album: Year: BitRate: 192K Stop 00:00 00:00 USB C: Phot usic C:\PICTURE\ .. 2010100.jpg 2010101.jpg 2010102.jpg 2010103.jpg Play File :0 Select Move Repeat 002/005 Total size:3.8 GB Unused size:3.7 GB 2010100.jpg 1024 x686 229.0KB

the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support (Refer to Warraty page). SYMPTOM POSSIBLE CAUSE REMEDY Dead. No LED lit No power to the TV. •� Check all connections to the TV's�AC�socket. Dead. No LED lit red Set in standby mode. •� Press either the Power button or the Standby button on the remote control. Blue screen No signal. •� Press the SOURCE button to select the correct source. Incorrect source selected. Noisy, snowy, ghosting picture (TV) Poor antenna signal. •� If using an indoor antenna, try adjusting the antenna position. Check antenna connections. No sound Sound "Mute". •� Turn sound "Mute" off. Volume set too low. •� Check volume settings. External leads not connected "if used". •� Check that all external leads are connected properly. Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM POSSIBLE SOLUTIONS No sound and picture •� Check that the main plug has been connected to a wall outlet. •� Check that you have pressed the POWER on the front of the TV set. •� Check the picture contrast and the brightness setting. Red LED indicator lights •� Set in standby mode. Press either the Power button or the Standby button on the remote control. Normal picture but no sound •� Check the volume. •� Sound muted? Press the MUTE button. •� Try another channel, the problem may be with the broadcast. •� Are the audio cables installed properly? The remote control does not work •� Check to see if there are any objects between the TV and remote control causing obstruction. •� Are batteries installed with correct polarity (+/-)? •� Correct remote operating mode set: TV, VCR, etc? •� Install new batteries. Power suddenly turns off •� Is the sleep timer set? •� Check the power connection, power may be interrupted. •� No broadcast on the station tuned. Picture appears slowly after switching on •� This is normal, the image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes. Poor color or picture •� Adjust the color in Menu option. •� Keep�a�sufficient�distance�between�the�product�and� the VCR. •� Try another channel, the problem may be with the broadcast. •� Are the VIDEO cables installed properly? •� Activate any function to restore the brightness of the picture. Horizontal/vertical bars or picture shaking •� Check for local interference, such as an electrical appliance or power tool. Blue screen •� Press the SOURCE button to select correct source. Poor reception on some channels •� Station or cable experiencing problems. Tune to another station. •� Station signal is weak, reorient antenna for better reception. •� Ckeck for sources of possible interference. Lines or streaks in pictures •� Check the antenna (change the direction of the antenna). No output from one of the speakers •� Adjust balance in the Menu option. TROUBLESHOOTING

PROBLEM POSSIBLE SOLUTIONS The signal is out of range •� Adjust resolution, horizontal or vertical frequency. •� Check whether the signal cable is connected or loose. •� Check the input source. Vertical bar or strip on the background, horizontal noise and incorrect position •� Set�the�auto�configure�or�adjust�clock,�phase,�or� H/V position. Screen color is unstable or is a single color •� Check the signal cable. •� Reinstall the PC video card. Maintenance Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Clean the screen A great tip to dust off your screen: wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the screen. Make sure the excess water is off the screen, then let air-dry before you turn on the TV. Cleaning the cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, line-free cloth. Please be sure not to use a wet cloth. SPECIFICATIONS Panel Size 23.6 inches diagonally Display Type LED Panel Technology TFT Panel 60 Hz Vs. 120 Hz 60 Hz Display Resolution 1080P HDMI & Component Support Up to 1080P Panel Resolution 1920 x 1080 Aspect Ratio 16:9 Dynamic Contrast Ratio-Panel 1000:1 Brightness (Centre Typ.) Cd/M² 220 Response Time (G To G) 5 ms Lamp Life (Typ. Hours) 50000 hours Horizontal Viewing Angle (At CR>20) 140 Vertical Viewing Angle (At CR>20) 130 TV System ATSC/NTSC Channel Range VHF/UHF Design�and�specifications�are�subjects�to�change�without�prior�notice.� This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •� Reorient or relocate the receiving antenna. •� Increase the separation between the equipment and the receiver. •� Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. •� Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface�cables�have�been�provided�with�the�product�or�specified�additional�components� or�accessories�elsewhere�defined�to�be�used�with�the�installation�of�the�product,�they�must� be used in order to ensure compliance with FCC regulation.

not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. This TV incorporates High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI�logo�and�High-Definition�Multimedia�Interface�are�trademarks�or�registered�trademarks� of HDMI Licensing LLC.