Emerson Micro Motion ELITE Installation Manual

the sensor is not grounded via the piping, connect a ground wire to the internal or external grounding screw, which is located on the transmitter, core processor, or junction box. Ground the flowmeter to earth, or follow ground network requirements for the facility. Improper grounding can cause measurement error. If national standards are not in effect, follow these guidelines to ground the sensor: • Use copper wire, 14 AWG (2,0 mm²) or larger wire size. • Ke ...

Notes • When ambient temperature is below –40 °F (–40 °C), a core processor or Model 2400S transmitter must be heated to bring its local ambient temperature to between –40 °F (–40 °C) and +140 °F (+60 °C). Long-term storage of electronics at ambient temperatures below –40 °F (–40 °C) is not recommended. • Temperature limits may be further restricted by hazardous area approvals. Refer to the hazardous area approvals documentation shipped with the sensor or available from the Micro Motion web site (www.micromotion ...

Pressure Rating (bar) Flange Type ASTM Material ≤50C 100C 150C 200C 250C 300C 350C 400C 427C EN 1092-1 PN40 Form B1 11 weld neck 304 40.0 34.4 30.8 28.0 26.0 24.1 23.0 22.0 21.4 EN 1092-1 PN40 Form B1 & D 11 weld neck 316 40.0 40.0 36.3 33.7 31.8 29.7 28.5 27.4 26.9 EN 1092-1 PN100 Form B2 & D 11 weld neck 316 100.0 100.0 90.9 84.2 79.5 74.2 71.4 68.5 67.3 EN 1092-1 PN40 Form B1 32/02 lap joint C-22 collar/ 304 flange 40.0 34.4 30.8 28.0 26.0 24.1 23.0 22.0 21.4 22 Micro Motion ELITE Coriolis Flow and Density Sensors ...

*20002158* For the latest Micro Motion product specifications, view the PRODUCTS section of our web site at www.micromotion.com. Micro Motion Inc. USA Worldwide Headquarters 7070 Winchester Circle Boulder, Colorado 80301 T +1 303–527–5200 +1 800–522–6277 F +1 303–530–8459 Micro Motion Europe Micro Motion Asia Emerson Process Management Emerson Process Management Neonstraat 1 1 Pandan Crescent 6718 WX Ede Singapore 128461 The Netherlands Republic of Singapore T +31 (0) 318 495 555 T +65 6777–8211 F +31 (0) 318 ...

*20002158* For the latest Micro Motion product specifications, view the PRODUCTS section of our web site at www.micromotion.com. Micro Motion Inc. USA Worldwide Headquarters 7070 Winchester Circle Boulder, Colorado 80301 T +1 303–527–5200 +1 800–522–6277 F +1 303–530–8459 Micro Motion Europe Micro Motion Asia Emerson Process Management Emerson Process Management Neonstraat 1 1 Pandan Crescent 6718 WX Ede Singapore 128461 The Netherlands Republic of Singapore T +31 (0) 318 495 555 T +65 6777–8211 F +31 (0) 318 ...

The CMF010 sensor has an optional mounting configuration for use with small or flexible pipeline. If the pipeline adequately supports the sensor, this procedure can be skipped. Procedure 1. Locate the optional mounting holes. For sensors with a junction box, the junction box must be rotated to the side to expose the mounting holes. See Figure 5. Figure 5 Optional Mounting for CMF010 Sensors A B C A Two user-supplied 5/16″ (M8) bolts B Junction box or core processor (junction box shown) C Mounting surface 2. If necessary, install rigid stand ...