Alcatel-Lucent 8068 Operation & User’s Manual

OmniPCX Enterprise system:  8068 Bluetooth® Premium DeskPhone (8068 BT)  8068 Premium DeskPhone This guide covers the specific functions of the Premium DeskPhone attendant set (consult the set user manual for a description of the other services):  Handling calls (calling and answering calls, consultation calls, transferring calls, conferencing, …),  Additional features (Routing, Network/Network Transfer, Transfer with privilege, …), Reserving a group of outside lines for exclusive operator use,  Management from the Attendant Set (Selecting answer and transfer operating modes, selecting the attendant group status, ). The purpose of the attendant sets (organized in groups) is to ensure efficient routing of external calls and, where appropriate, to call external numbers on request. One or more attendants share the workload (up to 80 attendant stations may be operational in the same system). Each attendant set must belong to an attendant group. The keys appearing on the 8068 Premium DeskPhone set offer all the features required for efficient management of incoming and outgoing calls. Some system features can be accessed from the attendant set. They include (depending on system settings): - Attendant status change (e.g. switchover from day to night status). This results in differences in call routing and the features that can be accessed on the set - External line reservation for exclusive use - System operation monitoring - The programming of services such as date and time, speed dialing numbers, etc.

5 1.1 8068 BLUETOOTH® / 8068 PREMIUM DESKPHONE 5 1.2 CONNECTIVITIES 5 1.3 WELCOME SCREENS 6 1.4 NAVIGATION 6 1.5 STATUS ICONS / CALL ICONS 7 1.6 PERMANENT FEATURES KEYS 7 1.7 ALPHABETIC KEYBOARD 8 1.8 ADD-ON MODULE 9 1.9 CALL MANAGEMENT SCREEN 10 1.10 BLUETOOTH® WIRELESS HANDSET 11 2 OPERATOR STATION (OS) BASIC FEATURES 12 2.1 PUTTING THE ATTENDANT SET IN SERVICE 12 2.2 METHODS FOR CALLING A NUMBER 12 2.3 CALLING AN INTERNAL USER 13 2.4 CALLING AN EXTERNAL USER 16 2.5 ANSWERING CALLS 16 2.6 PUTTING A CALL ON HOLD 18 2.7 CONSULTATION CALL 18 2.8 CALL TRANSFER (ROUTING) 20 2.9 ROUTING PARTICIPANTS TO A MEET-ME CONFERENCE 21 3 ADDITIONAL FEATURES 22 3.1 ROUTING WITH CHAINED EXTEND 22 3.2 ROUTING WITH EXTEND AND CAMPED-ON RELEASE 22 3.3 SENDING A CALIBRATED CUT-OFF OR FLASH 23 3.4 TEMPORARY HOLD OF AUTOMATIC TRANSFER 23 3.5 DIRECTORY NUMBER SUPERVISION 23 3.6 INDIVIDUAL CALL ROUTING 24 3.7 NETWORK/NETWORK TRANSFER 25 3.8 TRUNK GROUP SUPERVISION 26 3.9 O/S TRUNK SUPERVISION 26 3.10 INDIVIDUAL HOLD 26 3.11 APPOINTMENT REMINDER 27 3.12 CALL PRESENTATION 28 3.13 TRANSFER WITH PRIVILEGE 29

30 4.1 SELECTING ANSWER AND TRANSFER OPERATING MODES 30 4.2 SELECTING THE ATTENDANT GROUP STATUS 30 4.3 SELECTING THE ENTITY STATUS 31 4.4 SIGN OFF/SIGN ON 31 4.5 INFORMATION 31 5 GUARANTEE AND CLAUSES 32 5.1 SAFETY INSTRUCTIONS 32 5.2 REGULATORY STATEMENTS 33

1.1 8068 Bluetooth® / 8068 Premium DeskPhone 1.2 Connectivities Description of the connectors RJ 11 connector for external ringer and audio active envelop indicator. Add-on module connector (SATA type). RJ 9 connector for alphanumerical keyboard. 10/100/1000 Gigabit Ethernet connector (PC). 10/100/1000 Gigabit Ethernet connector (LAN). DC power jack for an external power adaptor. RJ9 connector for a corded handset.  Bluetooth® wireless handset (8068BT).  Wired handset. 3.5 mm headset jack Alphabetic keyboard Loudspeaker  Color screen  10 dedicated functions keys Permanent feature keys: quick access to the phone’s main features Navigation LED  Flashing blue: incoming call. Arrival of a new call.  Flashing orange: alarm. An adjustable and stable foot

You can access all of your phone's features from these screens. The default display has three pages that you can access by pressing the page tabs at the top of the screen. The selected page is highlighted. o Menu o Perso o Info  Menu page: Contains all features and applications accessible by pressing the label of the desired feature or application From this page, it is possible to adjust the ringer volume, program the time of an appointment, lock the terminal, define the default page displayed, configure voice mail, and access telephone functions such as calling back one of the last numbers or intercepting calls.  Perso page: Contains call line keys (allowing supervision of calls) and programmable call keys.  Info page: Contains information on the telephone and the status of its functions: name, telephone number, number of messages (including call log events, instant messages and voice messages), activation of transfer function, appointment reminder, etc.  Next page: The next page displays the list of incoming calls (i.e. call handling page). The caller information displayed in the next page differs according to the type of incoming call. - For internal or network incoming calls, the caller identity and entity are displayed - For external incoming calls, the caller identity is displayed when the caller directory number has been defined in the system as speed dialing number. When this is not the case, the caller directory number is displayed as well as the name of the trunk group.  Hold page: The Hold page displays the calls being routed and the calls put on hold from this set. Up to two calls being routed and two calls on hold can be displayed simultaneously on the screen.  Camp On page: The Camp on page only appears when the Hold page is not available. This is the case when no common hold key has been programmed on the set main (perso) page.  / Transfer icon: Pressing the key next to this icon allows you to program or change the transfer function. 1.4 Navigation OK key: Used to validate your choices and options while programming or configuring. Left-right navigator: Used to move from one page to another and display information about current calls (call in progress, calls on hold, incoming call). Up-down navigator: Used to scroll through the content of a page. Back/Exit key Use this key to go back to the previous step. Use this key to go back to the homepage (long press).

Icons giving information about some specific configurations of the phone or about call status are displayed in the top bar of the screen. Indicates that the status of the attendant group is "day service". Indicates that the status of the attendant group is "night service". Indicates that the status of the attendant group is "forward 1". Indicates that the status of the attendant group is "forward 2". Headset connected. Telephone locked. Appointment programmed. Incoming call icon. Call in progress icon. Call holding icon. 1.6 Permanent features keys They are located just above the loudspeaker Mute and intercom key. During a call, press this key to stop your contact from hearing you. When idle, press this key to switch the phone to intercom mode. When you receive a call, the phone hooks off automatically and you go straight into handsfree mode. When activated, this is key blue. Turn down the volume / Lower the contrast. Turn up the volume / Increase the contrast. Pressing this key answers an incoming call in handsfree mode (the key is blue). When a call is in progress, pressing this key switches from handsfree mode to headset or handset mode. Programmable keys (F1 and F2 keys).Lit when the function associated with the key is activated. A service or a direct call can be associated to these keys. Redial key: to access the 'Redial' feature. Last number redial (short press). Call back on the last 10 number dialed (long press). Guide key: Used to obtain information on functions of the “menu“ page and to program key of the “perso“ page. Messaging key to access the messaging portal (call log, voice messages and instant messages). This key flashes blue when there is a new event such as a new voice message, a new instant message or a new event in the call log.

Your set is provided with an alphabetic keyboard depending on your country and language:  Country variants: o AZERTY o QWERTZ o QWERTY (international) o QWERTY (nordic) Use the keyboard to enter names while configuring the phone. Directly access the dial by name feature by entering the name of your caller on the keyboard. Below is a list of the function keys that allow you to access all the symbols. Cursor moving keys (left, right, up and down). Allows you to navigate edit boxes. Press the Alt key to access the left and up directions. Caps lock: to write text in capital letters. Alt key: to access specific and punctuation characters. Enter key: to validate edited text. Backspace key: to delete one character in an edit box.

Flashing blue: incoming call Installation Premium Add-on 10 keys modules 1. Remove the protection of the dedicated compartment behind the set. 2. Insert the add-on correctly in the compartment. 3. Plug the provided cord into the dedicated socket behind your set. 4. Fix the add-on with the screw provided. Premium Add-on 40 keys / Premium Smart Display 14 keys:  Plug the provided cord into the dedicated socket behind your phone.  If you wish, fix the feet (set and add-on) with the the add-on clip available as an option in pack (x4). 1 2 3 4

Each tab corresponds to a call, the status of which is symbolized by its icon (in progress, held, arrival of new call). When a call is in progress, use the left-right navigator to look at held or incoming calls. All features are accessible while the call is displayed on the screen. Use the Up and Down arrows to move up or down a page. These functions (transfer, conference, etc.) are directly related to the status of the call consulted. For example, the transfer function will not be available between a call in progress or a held call and an incoming call. Used to switch from a telephone screen to an application screen. For example, it can be used while a call is in progress to search a number, program an appointment reminder, etc. Calls can also be managed from the Perso page. While the call is in progress, press the Back/Exit key and display the Perso page. Calls in progress or waiting calls are displayed on the different line keys. It is then possible to converse with the caller of your choice by pressing the key associated to the caller. Incoming call and conversation presentation screen Soft keys: actions available depending on the call status Incoming call icon, Call in progress , Call on hold , …

The Bluetooth® Wireless handset is only available with the 8068 Bluetooth® Premium DeskPhone.  Off-hook/On-hook: press this key to take or terminate a call. Volume/Mute:  Short successive presses to change the handset volume level (3 levels).  Long press to activate or deactivate mute mode. LED If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-hook key to take or terminate the call. Just off-hook/on-hook the Bluetooth® handset. LED  Off: operating normally.  Blinking green: in communication.  Green steady: handset charging.  Orange flashing: battery charge low or handset outside coverage zone.  Orange steady: malfunction. Installing or replacing the Bluetooth® handset battery The battery recharges when the Bluetooth® handset is on its base. Lift up the battery cover Slide out the battery holding part

2.1 Putting the Attendant set in Service When the attendant set is powered up, at the end of an initialization period, the screen displays the Attendant status page. This indicates that the attendant is out of service. 1. Press the softkey to put the attendant in service: sign on. The Next page is displayed. 2.2 Methods for calling a number Direct dialing The attendant dials the user's number directly on the dialing keypad. To reach an external number, the attendant first dials the external prefix before the external number. Calling via the Set Directory The personal directory is used to select an internal (or external) user via a softkey - without having to dial the full destination number. The number called may be an internal, external, or speed dialing number. Call by personal directory can be performed with the attendant set in idle state or when the attendant set is already in conversation. The main (perso) page or the add-on keypad modules if they exist, display the personal directory entries already created. Pressing the up or down arrow on the navigator provides access to additional personal directory entries softkeys. When calling the user, a telephone area corresponding to the user you want to call is displayed on the screen. This area gives the status of the user. If the user is free for example you can, the following softkeys are available: Ring Call this user. Release To release this user. Call back Send a call-back request to this user. Vociemail Leave a message on the voicemail of this user.

This feature is used to select a party by name. “Dial by name” can be requested either from idle state or when in conversation. When the attendant uses the “Dial by name” feature, the system searches the system directory, then, if the search is unsuccessful, a standard LDAP directory (if there is one). Pressing any key on the alphabetical keyboard switches the attendant set to Dial by name mode. As soon as you enter the first letters of the name, surname or initials, you are invited to select the appropriate search by pressing on one of the following softkey: - Name, - Initials, - Name-1stName. When more than one result corresponds to the search, the screen displays a page indicating the number of answers for this search and the corresponding list of users. Select the desired user by pressing the softkey next to his/her name. Call by Speed Dialing Access speed dialing by: - The direct speed dial number of the desired user. - Der Zugang Präfix gefolgt von der erforderlichen Ziffern. - Pressing a key programmed with a speed dialing number. 2.3 Calling an internal User When an internal user number is dialed, the user set, if free, is reserved by the attendant (becomes under attendant control). The user can still dial a number or access another service if it is a multiline set. The user set does not ring until the attendant presses the softkey: Ring. This specific feature of the attendant set ensures the attendant can always reach the station user. If the user picks up the receiver (goes off-hooks), the user hears the music-on-hold, indicating that the set is reserved and that all outgoing calls are denied. When the attendant presses the Ring softkey on the attendant set, it is automatically connected to the user. If the user set is a multiline set, the user is not locked and can make calls. However, a set resource is used for the incoming call from the attendant set.

Once the user’s number is dialed, the screen indicates: - The name and first name of the called party, if known to the system. - The internal directory number of the called party. - The name of the entity to which the called party belongs. - That the selected set is free. The following softkeys are available: Ring Call this user. Release To release this user. Call back Send a call-back request to this user. VoiceMail Leave a message on the voicemail of this user. Once the user is in conversation with the attendant, only the attendant can release the call by pressing the Release softkey. The called set is busy Once the user’s number is dialed, the screen indicates: - The name and first name of the called party, if known to the system. - The internal directory number of the called party. - The name of the entity to which the called party belongs. - That the selected set is busy. Depending on the called phone type (multiline or single line set); the available softkeys are: Called set type Available softkeys Description Multiline set (with a free line) Ring Call the user. Release Release the user. Call back Send a call back request to the user. Single line (or multiline with all lines busy) Release Release the user. Camp on/Camp on off To activate/deactivate automatic ring when user has hung up. Call back Send a call back request to the user. Intrude on/off To barge in the conversation between the called set and the external party (when the set is in conversation with an external party). The called set is in “Do Not Disturb” state. When calling a user who activated the Do Not Disturb feature, the message « DND » is displayed on the attendant set.

Depending on the activated forward, you will have access to different features through the softkeys. To activate ringing on the forwarding destination set: softkey Ring. To release both the forwarding destination set and the forwarded set: softkey Release To activate the Privileged access override feature so that the forwarded set can be called despite the forwarded status of the set: softkey Overide To send a call-back request to the forwarding destination set: softkey Call back Called set forward type Available softkeys Description Do Not Disturb Ring Call the user. Call back Send a call back request to the user. Release Release the user. Immediate forward Ring To activate ringing on the forwarding destination set. Release To release both the forwarding destination set and the forwarded set. Override To call the forwarded set despite the forwarded status of the set. Callback To send a call-back request to the forwarding destination set. Forward on No answer Ring Call the user. Release To release both the forwarding destination set and the forwarded set. Follow fwd To follow forward of the forwarded set. Ring To activate ringing on the forwarding destination set. Release To release both the forwarding destination set and the forwarded set. Overide To call the forwarded set despite the forwarded status of the set. Callback To send a call-back request to the forwarding destination set. Voicemail To deposit a voice message on the voice mail of the forwarding destination set. Callback To send a call-back request to the forwarded set. Call back Send a call back request to the user. Release Release the user.

Ring To activate ringing on the forwarding destination set. Release To release both the forwarding destination set and the forwarded set. Overide To call the forwarded set despite the forwarded status of the set. Release To release the forwarded set. Camp on To ring automatically the busy set as soon as the user has hung up. After having activated call waiting, Camp on off softkey is used to deactivate it. Intrude To barge in the conversation between the called set and the external party. To exit, press the Intrude off softkey. Callback To send a call-back request to the forwarded set. Callback To send a call-back request to the forwarding destination set. 2.4 Calling an external user To call an external user, the attendant can dial an external access prefix or an ARS prefix. Trunk group name in the telephone area is the name of the group of external lines. External in the telephone area indicates that the ARS feature selects the “optimum” route for the external call. Pressing the Release softkey releases the current call and returns the attendant set to idle state. Available softkeys when dialing the number or when the number is dialed: Softkey Feature Correct To correct the last digits dialed in case of dialing mistake. Release To release the current call. Send To activate ringing on the called external set. 2.5 Answering calls Automatic/Manual Answer There are two operating modes to answer a call: - Automatic answer to take automatically any incoming call or any call that is waiting during call routing (Pressing the Auto answer softkey in the main (perso) page activates or deactivates the Auto answer feature). - Manual answer which requires an attendant action to take a call.

When receiving a call, the Alarm LED located at the top of the attendant set flashes and the incoming call is presented on the “Next” page. Pressing the softkey next to the name of the caller or pressing the “OK” key of the navigator, starts the communication. Answering an external call When receiving a call, the Alarm LED located at the top of the attendant set flashes and the incoming call is presented on the “Next” page. Pressing the softkey next to the number (or name if known to the system) of the caller or pressing the “OK” key of the navigator, starts the communication. “Trunk group name” in the telephone area is the name of the group of external lines. Answering a Call to the Attendant Group When an internal user dials the group number, the call is presented on the Next page (If another attendant takes the call, this one disappears on the attendant screen). Pressing the softkey next to the name of the caller or pressing the “OK” key of the navigator, starts the communication. The following softkeys are: Softkey Feature Hold To put the internal user set on hold with the music-on hold or waiting tone. Release To release the current call. Forward ope To initialize a forwarding to another attendant by dialing his/her call prefix (or the call prefix of the attendant group). As soon as dialing is complete, forwarding is activated automatically. Meet me conf To route the party to a meet-me conference. DTMF on/DTMF off To activate or deactivate DTMF transparency. The attendant does not answer immediately When the call is not answered, the normal call becomes an urgent call, the alarm led located at the top of the assistant set flashes, and the ringing cycle speeds up. The attendant set is put absent in case of no answer, and it is necessary to put the attendant set in service again. Answering a call back request An authorized internal user can activate a callback request to the attendant. To check the presence of a callback request, press the messaging key. Press the softkey next to the notification key to consult the call back request. Select the desired user by pressing the softkey next to his/her name.

Softkey Feature Delete To delete the present callback request. Delete all To delete all the callback requests. Recall To recall the user who has sent a callback request. 2.6 Putting a call on hold When in conversation with a party you can initiate a consultation call by pressing on the softkey: Hold. Pressing on this softkey puts the user on hold with a music or waiting tone and displays the Hold page. The on hold symbol in front of the caller indicates that the caller is on hold. Note : pressing the F1 personal key has the same effect as pressing the Hold softkey. This puts the user set on hold. Pressing the softkey next to the name of the caller retrieves the call on hold. If the attendant does not retrieve the call before the end of the timer: - Ringing is activated to indicate that the user is calling back the attendant set - The Alarm LED located at the top of the attendant set flashes in red - The call on hold is also displayed in the next page - The attendant is considered as absent and the set status is put to signed off state. 2.7 Consultation call Consultation call to an internal user A consultation call is activated as soon as the attendant starts dialing the first digit of the desired user’s number and a second telephone tab appears. When the number is completely dialed the following softkeys are available: Softkey Feature Transfer To transfer (without oral presentation to the second party) the first party to the second party. Ring To activate ringing on the second party set. Transfer To transfer (without oral presentation to the second party) the first party to the second party which is ringing. Broker To switch between the first party and the second party which is ringing (the first party is automatically put on hold when not in conversation). Cancel To cancel the consultation call and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call. Call back To send a callback request to the second party which is ringing. Cancel To cancel the consultation call and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call. Call back To send a callback request to the second party. DTMF on / DTMF off To activate/Deactivate DTMF transparency. Voicemail To leave a message on the voicemail.

Softkey Feature Transfer To transfer (with oral presentation to the second party) the first party to the second party. Broker To switch between the first party and the second party (the party which is not in conversation is automatically put on hold). Cancel To cancel the consultation call and continue the conversation with the party which is not in conversation when the Cancel softkey is pressed. Release To release both the conversation with the first party and the consultation call. DTMF on / DTMF off To activate/Deactivate DTMF transparency. Conference To put the first party, the second party and the attendant in conference. Consultation call to an external user A consultation call is activated as soon as the attendant dials the external access prefix and the first digit of the desired external number and a second telephone tab appears. When the number is completely dialed the following softkeys are available: Softkey Feature Correct To correct the last digits dialed in case of dialing mistake. Send To activate ringing on the called external set. Note: After a short timer, the external set is automatically rung without pressing the Send softkey. Cancel To cancel the consultation call and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call. When the second party answers the call, the following softkeys are available: Softkey Feature Transfer To correct the last digits dialed in case of dialing mistake Broker To activate ringing on the called external set. Note: After a short timer, the external set is automatically rung without pressing the Send softkey. Cancel To cancel the consultation call and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call. DTMF on/DTMF off To activate/Deactivate DTMF transparency. Conference To put the first party, the second party and the attendant in conference.

A three-party conference may be initialized by the attendant if there is an on-hold call and a conversation call. Pressing the Conference sofkey puts the first party, the second party and the attendant in conference. Softkey Feature Transfer To leave the conference and let the two parties in conversation. Cancel To cancel the three-party conference and continue the conversation with: - The first party when consultation call to an internal user, - The second party (external party) when consultation call to an external user. Release To leave the three-party conference and release the two parties. End Conf To leave the three-party conference, continue the conversation with the second party and put the first party on hold. 2.8 Call transfer (routing) Automatic/Manual transfer There are two transfer modes: - Automatic transfer, which automatically transfers the call to a free user immediately after dialing without other action. - Manual transfer, which requires an attendant action to transfer a call. Transfer to a Busy Set When the busy set dialing is complete, the following softkeys are available: Busy set is multiline (with a free line) Softkey Feature Transfer To transfer the first party to the busy set which can take the call on its free line. Ring To activate ringing on the busy set while the first party is put on hold. Cancel To cancel the consultation call with the busy set and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call with the busy set. Call back To send a callback request to the busy set while keeping the conversation with the first party. DTMF on/DTMF off To activate/Deactivate DTMF transparency. Busy set is single line or multiline with all lines busy Transfer To transfer the first party to the busy set. When the busy set will hang up, it will be automatically called by the first party. Cancel To cancel the consultation call with the busy set and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call with the busy set. Camp on/Camp off To call the busy set as soon as the user has hung up while putting the first party on hold. Call back To send a callback request to the busy set while keeping the conversation with the first party. DTMF on/DTMF off To activate/Deactivate DTMF transparency.

An attendant cannot take part in a meet-me conference. An attendant can add a participant in a meet-me conference if the conference circuit is not fully busy or can reserve a conference circuit in order to add different participants (maximum of 29) to this conference. Note: If the attendant is involved in routing actions to a conference, the attendant can no longer respond to internal or external calls. The normal and urgent waiting calls counters are, however, updated. - When a participant enters the conference, an audible beep signals their entry to the other participants during the conversation. - If an external trunk is alone in the conference, it will be forwarded to the attendant set after a timer. - However, if another participant joins the conference call, this timer is canceled. The Conference Circuit is Free When a conference circuit is free (no conference established), the attendant can call a first participant. When the attendant is in conversation, he/she can press the Meet me conf softkey and dial the conference number. The user is connected to the conference. To add other participants, the attendant follows the same procedure seen previously. The Conference is In Progress When the conference is in progress and the attendant is in conversation with a party, he/she can press the Meet me conf softkey and dial the conference number to add this user to the conference.

3.1 Routing with chained extend Routing with chained extend allows the attendant to transfer an incoming external call to an internal set. The external party is rerouted to the attendant set as soon as the internal user has hung up. This allows to successively route the same call to several destinations. The attendant is in conversation with an external party. 1. The attendant dials the number of the desired internal set. The following softkeys are available: Transfer To transfer (without oral presentation to the second party) the first party to the second party. Ring To activate ringing on the second party set. Cancel To cancel the consultation call and continue the conversation with the first party. Release To release both the conversation with the first party and the consultation call. Chained To activate ringing on the second party set. Callback To send a callback request to the second party. DTMF on/DTMF Off To activate/Deactivate DTMF transparency. 2. When the attendant presses the Chained softkey, the second party set is rung. 3. When the second party takes the call, the attendant set returns to the idle state. 4. The external party is rerouted to the attendant set as soon as the internal user has hung up. 5. Once pressing the softkey next to the name of the external caller, the attendant can transfer or release the call. 3.2 Routing with extend and camped-on release When routing an external call to a busy internal set, the attendant can put the call on hold. When the busy internal user hangs up, it is not rung. The external call on hold is signaled to the attendant. The attendant can then route it to the called user. The attendant is in conversation with an external party. 1. The attendant dials the number of the desired internal set. This set is busy. 2. To transfer the call, the attendant presses the softkey : Announce The busy internal user quickly hangs up He/she is informed that the attendant wants to reach him/her. Transfer The attendant may transfer the external party to the internal party by pressing the softkey. The busy internal user does not quickly hang up Pressing the softkey next to the number of the external caller allows the attendant to: Announce Attempt to reach again the internal party by pressing the softkey. Intrude Barge in the conversation between the two correspondents by pressing the softkey. Transfer Inform the busy internal user that an external party wants to reach him/her, then transfer the external party to the internal user after he/she has hung up, by pressing the softkey.

This feature sends a calibrated cut-off or flash on the line before sending dialed digits in transparency mode. Pressing the Flash softkey sends a calibrated pulse to the remote piece equipment. This remote equipment can then return a tone inviting the attendant to continue dialing. 3.4 Temporary hold of automatic transfer If the automatic transfer mode is activated, the current call is automatically transferred to a free user after the attendant has dialed the user number. The feature is enabled when the checkbox next to the feature label is validated. 1. When receiving an external call while the Automatic transfer is enabled, deactivate temporarily the automatic transfer by pressing on the softkey: Transfer off. 3.5 Directory number supervision The attendant may supervise several internal numbers when the Directory Number Supervision feature is programmed by the system administrator for these internal numbers. These internals sets must be in the same node as the attendant set. When supervised internal number is displayed in the main (perso) page, the name of the corresponding user is followed by an icon indicating their set state: Indicates that the internal user is busy. (flashing) Indicates that the internal user is on hold. Indicates that the internal user has left a callback request or is in conversation with the attendant set. Indicates that the internal user has requested an urgent conversation with the attendant set. When supervised internal number is displayed on a Smart Display Module, the name of the corresponding user is followed by an icon indicating their set state Indicates that the internal user is busy. Indicates that the internal user has left a callback request or is in conversation with the attendant set. Indicates that the internal user has requested an urgent conversation with the attendant set. (flashing) Indicates that the internal user is on hold.

This feature allows the attendant to route and supervise an incoming external call without its being placed in the common waiting queue and redistributed. When this feature is programmed by the system administrator, he/she can put the Indiv routing key on the main (perso) page or on the Smart Display Module. Indiv routing Key Present on the main (perso) Page The attendant is in conversation with the external party. 1. Dial the number of the internal party. 2. Press the key . The Next page is displayed. 3. Press the left arrow on the navigator. The main (perso) page is displayed. 4. Press the key: Indiv routing. The external party is connected to the individual routing circuit and the internal set is ringing. The attendant screen displays automatically the next page but the icon following the Indiv routing key string is on steady on the main (perso) page. Steady If the internal set does not reply before the end of the routing timer, the attendant set rings (the ringing cycle speeds up) and the icon flashes on the main (perso) page, indicating an urgent situation Flashes As long as the internal set has not answered, the attendant may retrieve the call by pressing the Indiv routing key. The icon next to the Indiv routing softkey disappears. Disappears Indiv routing Key Present on the Smart Display Module The attendant is in conversation with the external party. 1. Dial the number of the internal party. 2. Press the key: Indiv routing. The external party is connected to the individual routing circuit and the internal set is ringing. The icon following the Indiv routing key string is on steady on the Smart Display Module. Steady If the internal set does not reply before the end of the routing timer, the attendant set rings (the ringing cycle speeds up) and the icon flashes on the Smart Display Module, indicating an urgent situation. Flashes As long as the internal set has not answered, the attendant may retrieve the call by pressing the Indiv routing key. The icon next to the Indiv routing softkey disappears. Disappears

to release the connection. When this feature is programmed by the system administrator, he/she can put the Net/Net key on the main (perso) page or on the Smart Display Module. Net/Net Key Present on the main (perso) Page Following an incoming call, the attendant makes an outgoing call to a party. The first party is automatically put on hold. 1. Press the key: . The next page is displayed. 2. Press the left arrow on the navigator. The main (perso) page is displayed. 3. Press the Net/Net key. The two parties are connected and supervision is activated. in steady state. 4. Press the Net/Net key again. The attendant barges in the conversation after a barge-in tone flashes. 5. Press the Net/Net key again. The attendant is back to supervision. in steady state. Once the connection is released, there is no icon next to the Net/Net label. Net/Net Key Present on the Smart Display Module Following an incoming call, the attendant makes an outgoing call to a party. The first party is automatically put on hold. 1. Press the Net/Net key. The two parties are connected and supervision is activated. in steady state. 2. Press the Net/Net key again. The attendant barges in the conversation after a barge-in tone. flashes. 3. Press the Net/Net key again. The attendant is back to supervision. in steady state. Once the connection is released, there is no icon next to the Net/Net label.

This function allows the attendant to monitor the occupation level of a trunk group via a key, present in the main (perso) page. The label of the key is the trunk group name. Next to the trunk group name:  There is no icon when there is still at least one trunk free in this trunk group,  There is a red cross when no further trunk is available in the trunk group. If there are still trunks free, pressing the trunk group name key corresponds to an ordinary external trunk seizure without numbering of this supervised trunk group. 3.9 O/S Trunk Supervision When this feature is programmed by the system administrator, the Os trkSup softkey is present on the main (perso) page.  When at least one trunk is out of service, the Os trkSup label is followed by a red cross. Pressing the Os trkSup softkey displays out of service trunk information.  When no trunk is out of service, pressing the Os trkSup softkey has no effect. 3.10 Individual Hold The Individual hold feature allows to put an external outgoing or incoming caller on hold on a specific circuit. When this feature is programmed by the system administrator, he/she can put the Indiv hold key on the main (perso) page or on the Smart Display Module. Indiv hold Key Present on the main (perso) Page The attendant is in conversation with the external party. 1. Press the key: . The next page is displayed. 2. Press the left arrow on the navigator. The main (perso) page is displayed. 3. Press the Indiv hold key. The external party is connected to the individual hold circuit and to the music on hold. The attendant screen displays automatically the Next page. When the timer expires, the ringing cycle speeds up. 4. Press the key to display the main (perso) page: . The icon located next to the Indiv hold key label flashes to indicate that the external party is on urgent hold ( ). 5. Press the Indiv hold key to retrieve the call from hold. Several keys can be programmed as individual hold keys. The party can only be retrieved from the idle state, the calls on hold will be redistributed after a period of time.

The appointment reminder feature allows to program wake up / appointment reminder to a set and the set will be called at the programmed time. This feature can be activated and deactivated from the attendant set. Single and multiple (up to 4) appointment reminders can be programmed. Single appointment reminder (in idle state) Programming: 1. Enter the prefix code for the appointment reminder feature. 2. Enter the time for appointment reminder. 3. Enter the destination set number. The appointment reminder is programmed and a clock icon appears on the destination set. Cancelling: 1. Enter the prefix code for the appointment reminder cancellation. 2. Enter the destination set number. The appointment reminder is cancelled and the clock icon disappears from the destination set. Single appointment reminder (in conversation state) Programming: 1. You are in conversation with the set requesting the appointment reminder. 2. Enter the prefix code for the appointment reminder feature. 3. Enter the time for appointment reminder. Appointment reminder is programmed and a message confirming programming is displayed on the screen. If you programm a new appointment reminder, the previously programmed appointment reminder will be cancelled. Cancelling: 1. You are in conversation with the set requesting appointment reminder cancellation. 2. Enter the prefix code for the appointment reminder cancellation. 3. Enter the destination set number. Appointment reminder is cancelled and a message confirming programming is displayed on the screen. Multiple appointment reminder (in idle state) Programming: 1. Enter the prefix code for the appointment reminder programming feature. 2. Enter the destination set number. 3. Choose from the available softkey (up to 4) and enter an appointment reminder time for each softkey. Appointment reminder is programmed and the clock icon appears on the destination set.

2. Choose from the available appointment reminders you want to cancel. 3. Press on the delete softkey. Ifall appointment reminders are cancelled, the clock icon disappears from the destination set. Multiple appointment reminders (in conversation state) Programming: 1. You are in conversation with the set requesting appointment reminders programming. 2. Enter the prefix code for the appointment reminder feature. 3. Choose from the available softkey (up to 4) and enter an appointment reminder time for each. 4. Press on the Release softkey to return to the conversation. Cancelling: 1. Enter the prefix code for the appointment reminder programming feature. 2. Choose from the available appointment reminders you want to cancel. 3. Press on the delete softkey. If all appointment reminders are cancelled, the clock icon disappears from the destination set. 3.12 Call Presentation This feature is used to allocate the waiting queue operating mode. One or more traffic flows can be associated to one or more keys. By pressing a key, the attendant takes the waiting call with the highest priority from the traffic flow(s) service by the key. When there is at least one call, the icon located next to the key is:  on the main (perso) page,  on the Smart Display Module. When there is at least one urgent call, the icon located next to the key is  on the main (perso) page,  on the Smart Display Module. This key can be dedicated to: Non DDI entity Trunk group calls without dialing, all entities Public entity Direct Inward Dialing (DDI) public calls, all entities Private entity DDI (ATL) private calls/internal calls, all entities Deb DDI entity Unanswered DDI calls, all entities Internal calls Private network calls to an attendant group External calls Public network calls to an attendant group VIP VIP calls (internal or ISDN via speed dialing) Misc Other calls/miscellaneous VIP2 VIP2 calls Recall Ope Callback Common Hold General hold

At entity level, this key can be dedicated for:  Trunk group entity calls without dialing,  DDI public entity calls,  DDI (ATL) private entity calls/internal calls,  Unanswered DDI entity calls. Key 1 is already pre-programmed as a call presentation key, allowing the attendant to take the call with the highest priority from those waiting resulting from traffic flows indicating an external party (external call, callback, return from chaining, etc.). 3.13 Transfer with Privilege This function lets the attendant transfer an external outgoing trunk to a user set if the corresponding direct seize prefix is contained in this Tsf with prev key. The user will dial the external party number as a call in direct seize. The transfer with privilege feature is useful for an internal user not authorized to dial a long distance call. The internal user calls the attendant. The attendant takes the line and allows the internal user to dial a long distance number and start a call.

This chapter describes the specific customization of the Attendant set. For general customization, please refer to uset manual of the set. 4.1 Selecting Answer and Transfer Operating Modes Selecting Answer Operating Mode Pressing the Auto answer softkey in the main (perso) page activates or deactivates the Auto answer feature: - Auto answer feature enabled when the checkbox next to the Auto answer label is validated: any incoming call is answered automatically when the attendant is free. - Auto answer feature disabled when the checkbox next to the Auto answer label is not validated. Selecting Transfer Operating Mode Pressing the Auto transfer softkey in the main (perso) page activates or deactivates the Auto transfer feature. 4.2 Selecting the Attendant Group Status For more information on attendant groups, see your system administrator. Note: This feature can be inhibited or assigned to the attendant set with or without password by the system administrator. In the example below, this feature is assigned to the attendant set without password by the system administrator. 1. In the menu page, navigate to: Service-> Group status. The screen displays the Group status page which gives the four following menu items: Night Switches the group to night mode and assigns users the Classes of Services (categories) that are valid at night. Day Activates day service. Fwd1 Activates forwarding order 1. Fwd2 Activates forwarding order 2. 2. Select the menu item you wish to use on the attendant set from the available options by pressing the corresponding softkey. 3. Confirm by pressing the OK fixed key.

This feature can be inhibited or assigned to the attendant set with or without password by the system administrator. In the example below, this feature is assigned to the attendant set without password by the system administrator. 1. In the menu page, navigate to: Service-> Entity status The screen displays the Entity list page which indicates all the entities related to the attendant group number. 2. Select the entity you wish to check or modify. Entity status page provides the following menu items: Night Switches the entity to night mode and assigns entity users the Classes of Services (categories) that are valid at night. Day Activates day service. Fwd1 Activates forwarding order 1. Fwd2 Activates forwarding order 2. Normal Takes the status of attendant group which manages the entity. 3. Select the menu item you wish to use on the attendant set from the available options by pressing the corresponding softkey. Pressing the up or down arrow on the navigator ( ) to display the rest of the list. 4. Confirm by pressing the OK fixed key. 4.4 Sign Off/Sign On Sign Off is used to put the attendant set out of service while Sign On puts the attendant set in service. 1. In the menu page, press the Sign Off softkey. The screen displays the Attendant status page, which indicates that the attendant set is out of service. 2. Press the Sign On softkey to put the attendant on service. 4.5 Information In the menu page, press the Information softkey. The screen displays the Information page which indicates the attendant group name and the individual attendant prefix.

5.1 Safety Instructions  Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a safe distance between your pacemaker or implant defibrillator and the handset which includes magnetic elements: 4 centimeters (1,6 inches) at least.  To limit the risk of interference, people with pacemakers must keep the wireless telephone away from their equipment (minimum distance of 15 cm/6 inches).  It is recommended to follow the standard acceptance procedures before using this equipment in human safety critical areas (hospitals...).  The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury, before each use ensure sharp metallic objects are not stuck to the earpiece and microphone.  There is a danger of explosion if the battery is replaced incorrectly - use only the battery with the reference 3GV28041AB (1.2V 1500 mAh) (Bluetooth® Handset only).  Battery charge (Bluetooth® Handset only): Charge the battery for about 16 hours before initial use.  Avoid using phones (other than cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.  Do not use the device in environments where there is a danger of explosion.  Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular Public Switched Telephone Network (PSTN) connection. This can result in severe damage to the phone.  Never allow your telephone to come into contact with water.  To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic parts of your telephone. Do not use aerosol cleaners.  This product is intended to be connected to the PABX via the LAN (10/100/1000 MB).  If you are connected to a POE connection do not use an external Power Supply.  The PoE (Power over Ethernet) devices that supply or receive power and their connected cables must all be completely indoors.  The RJ-45 jack is not used for telephone line connection.  The 8068 Premium DeskPhone also offers a Bluetooth® Radio Interface for the Bluetooth® handset or other Bluetooth® devices - frequency range 2402-2480 MHz, Radiated Power 1mW.

Marking This equipment is in compliance with the essential requirements of Radio Equipment Directive (RED) 2014/53/EU and with Directive 2011/65/UE (ROHS). The Declaration of Conformity may be obtained from: ALE International 32 Avenue Kleber 92700 Colombes [email protected] USA and Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Exposure to Radio Frequency Signals. This equipment complies with radiation exposure limits set by FCC/IC and the European Council. This equipment has very low levels of RF energy and is deemed to be compliant without testing of the specific absorption rate (SAR). User Instructions Only use the handset in temperatures between -5°C to +45°C (23°F to 113°F). This product is intended for use in an indoor environment only. This apparatus is Hearing Aid Compatible (HAC). Acoustic shock protection Maximum sound pressure level for handset is compliant with European, US and Australian standards. Directive 2003/10/EC specifying the risks inherent in noise at work A wired handset is also available and can replace the Bluetooth® handset. Privacy Privacy of communications may not be ensured when using the Bluetooth® handset or any additionnal Bluetooth® device. Disposal The equipment must be returned to a collection point for electronic equipment waste disposal. Defective batteries must be returned to a collection point for chemical waste disposal. Related Documentation Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site: http://www.al-enterprise.com?product=All&page=Directory The labels and icons presented in this document are not contractually binding and may be modified without prior warning The information presented is subject to change without notice. ALE International Enterprise assumes no responsibility for inaccuracies contained herein. Copyright ALE International 2016.