Canon iR1018 Quick Start Manual

Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. Series English Français Deutsch Italiano Español Guide de démarrage rapide Lisez ce guide avant d'utiliser cet appareil. Quand vous avez terminé la lecture de ce guide, rangez-le en lieu sûr afin de pouvoir le consulter ultérieurement. Kurzanleitung Bitte lesen Sie diese Anleitung sorgfältig durch, bevor Sie mit diesem Gerät arbeiten. Bewahren Sie diese Anleitung danach zum späteren Nachschlagen griffbereit auf. Guida rapida all’avvio Leggere attentamente la presente Guida prima di utilizzare il dispositivo. Dopo averla letta, riporre la Guida in un luogo sicuro per poterla consultare in seguito. Guía de inicio rápido Lea esta guía antes de poner en funcionamiento este equipo. Cuando haya terminado de leer esta guía, guárdela en un lugar seguro para posteriores consultas. Series Quick Start Guide Downloaded from ManualsPrinter.com Manuals

Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the iR1022iF, and also the menus described in this manual are based on the iR1022iF. Depending on the model of your machine, some settings may not be available and the number on the top of each menu may vary. Do You Have Everything? Before Setting Up the Machine Manuals for the Machine ● Remove all shipping tape on the machine. ● When moving the machine, be sure at least two people carry it using the provided hand grips on the left and right sides, as seen in the illustration right. ● The shapes of your machine and supplies may differ slightly from those listed in this manual. ● Quick Start Guide (This Document): Machine set-up and software installation ● Basic Operation Guide: (in User Software CD)*: Basic features, maintenance, machine settings, and specifications ● Advanced Operation Guide (in User Software CD)*: Advanced features, network and remote user interface, system monitor, and reports and lists ● Scanner Driver Guide (in User Software CD): Scanner settings from a computer * Included in User Manual CD for iR1018J ● Machine ● Paper Drawer (optional) ● Bracket (optional)***** ● Toner Cartridge**** ● Power Cord ● Telephone Cable****** ● Handset (optional)***** * iR1022F/1022i/1022iF only ** iR1018 and iR1022 Series only *** iR1018J only **** Installed in the machine, depending on the models purchased ***** Not available in UK ****** iR1022F/1022iF only ● Handset Cradle (optional)***** ● Screws (x 2 for each type) (optional)***** ● Destination Labels* ● Quick Start Guide ● User Software CD** ● User Manual CD*** ● Unpacking Instructions ● Drum Unit 1 2 Downloaded from ManualsPrinter.com Manuals

1 Remove the plastic case from the box. 2 Open the case and remove the toner cartridge. Keep the box and case for future use. CAUTION – Do not touch the portions (A) and (B). – Do not pull out the seal (C) before inserting the cartridge into the machine as the toner may spill out. 3 Open the front cover. 4 Pull the toner cartridge lever (A) towards you and insert the cartridge into the machine with the arrow (B) pointing towards the machine. 5 Holding the cartridge steady with one hand, pull out the seal completely with the other hand. NOTE Do not pull out the seal at an angle. 6 Turn the cartridge lever (A) as far as it will go counterclockwise. 7 Push down the lever. 8 Close the front cover. CAUTION – Be careful not to get your fingers caught. – If you cannot close the front cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine. NOTE If the cartridge is already set in your machine, begin with step 5. A C B A B A 4 Downloaded from ManualsPrinter.com Manuals

1 Open the left cover. 2 Open the package of the new drum unit and remove the protective packing material (A). 3 Hold the unit by its grips on both sides. 4 Align the marks on both sides of the drum unit (B) with the marks on the machine (A), and push the unit into the machine as far as it will go. 5 After the unit is completely inserted, remove the orange paper. 6 Close the left cover. CAUTION Be careful not to get your fingers caught. CAUTION Do not touch the portion (A) as the image quality of printouts may deteriorate. A B B A A A 6 Downloaded from ManualsPrinter.com Manuals

2 Even the edges of the paper stack. 3 Load the paper stack print side up. NOTE Make sure the back edge of the paper stack touches the rear paper end guide (C), the paper stack should not exceed the load limit mark (A), and the load is under the hooks (B) on the paper guides. 4 Gently insert the paper drawer as far as it will go. CAUTION Be careful not to get your fingers caught. NOTE For loading paper in the stack bypass, see Chapter 3, “Print Media,” in the Basic Operation Guide. A B B C 8 Downloaded from ManualsPrinter.com Manuals