Canon PowerShot SX700 HS Getting Started
Read Online
Read the Canon PowerShot SX700 HS Getting Started online using the built-in PDF viewer.
Text of the manual
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera
Battery Pack
NB-6LH
Battery Charger
CB-2LYE
Wrist Strap*
Getting Started
(this guide)
Warranty System Booklet
* For attachment instructions, refer to the Camera User Guide. See below for download
instructions.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity.
For details on the number of shots and recording time per memory card,
see “Specifi cations” in the downloadable Camera User Guide.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have been
verifi ed to work with the camera.
Manuals and Software
Manuals and Software
You can download manuals and software from the following URL:
http://www.canon.com/icpd/
� With a computer connected to the Internet, access the
above URL.
� Access the site for your country or region.
� For instructions on how to install the software, refer to the
Camera User Guide available for download.
Adobe Reader is required to view the manuals.
Camera User Guide
This manual covers the following topics:
� Basic instructions, from initial preparations to shooting and playback.
� Instructions on sending images and using Web services via Wi-Fi.
� Instructions on installing the software and importing images.
� Other instructions, about all camera features.
Software Instruction Manual
� This manual describes how to use the software.
Initial Preparations
Initial Preparations
Charging the Battery Pack
1 Insert the battery pack.
� After aligning the � marks on the battery
pack and charger, insert the battery pack
by pushing it in (
) and down (
).
2 Charge the battery pack.
� Plug the power cord into the charger, then
plug the other end into a power outlet.
� The charging lamp turns orange, and
charging begins.
� When charging is fi nished, the lamp turns
green. Remove the battery pack.
� For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifi cations” in the
downloadable Camera User Guide.
Inserting the Battery Pack and Memory Card
1 Open the cover.
� Slide the cover (
) and open it (
).
2 Insert the battery pack.
� While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
� To remove the battery pack, press the
battery lock in the direction of the arrow.
3 Check the card’s write-protect
tab and insert the memory card.
� Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
� Insert the memory card facing as shown
until it clicks into the locked position.
� To remove the memory card, push it in
until you feel a click, and then slowly
release it.
4 Close the cover.
� Lower the cover (
) and hold it down as
you slide it, until it clicks into the closed
position (
).
Terminals
Battery Lock
Terminals
Setting the Date and Time
1 Turn the camera on.
� Press the ON/OFF button.
� The [Date/Time] screen is displayed.
2 Set the date and time.
� Press the
buttons to choose an option. � Press the buttons or turn the <5> dial to specify the date and time. � When fi nished, press the
button. 3 Set the home time zone. � Press the buttons to choose your home time zone. � Press the button when fi nished. After a confi rmation message, the setting screen is no longer displayed. � To turn off the camera, press the ON/OFF button.
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1
Press the button.
2
Move the zoom lever to choose the [3] tab.
3
Press the
buttons or turn the <5> dial to choose [Date/Time],
and then press the
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specifi c scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on and enter
[
] mode.
� Press the ON/OFF button.
� Set the mode dial to [
].
2 Compose the shot.
� To zoom in and enlarge the subject, move
the zoom lever toward (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
(wide angle).
3 Shoot.
Shooting Still Images
� Press the shutter button lightly (
).
� The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (
).
� If [Raise the fl ash] appears on the screen,
move the switch to raise the fl ash.
It will fi re when shooting. If you prefer not
to use the fl ash, push it down with your
fi nger, into the camera.
Shooting Movies
� Press the movie button to start shooting,
and press it again to stop.
Trying the Camera Out
Viewing
1 Enter Playback mode.
� Press the <1> button.
2 Browse through your images.
� To view the previous or next image, press
the
buttons or turn the <5> dial. � Movies are identifi ed by a [ ] icon. To play movies, go to step 3. 3 Play movies. � Press the button, choose [ ] (either press the buttons or turn the <5> dial), and then press the
button again. � Playback now begins, and after the movie is fi nished, [ ] is displayed. � To adjust the volume, press the buttons. Erasing Images To erase the image you chose in step 2, do the following. Note that erased images cannot be recovered. 1 Press the
button. 2 After [Erase?] is displayed, press the
buttons or turn the <5> dial to choose [Erase], and then press the button.
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed
of with your household waste, according to the WEEE Directive
(2012/19/EU), the Battery Directive (2006/66/EC) and/or national
legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above,
in accordance with the Battery Directive, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in
this battery or accumulator at a concentration above an applicable
threshold specifi ed in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized
one-for-one basis when you buy a new similar product or to an authorized collection site for
recycling waste electrical and electronic equipment (EEE) and batteries and accumulators.
Improper handling of this type of waste could have a possible impact on the environment
and human health due to potentially hazardous substances that are generally associated
with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective usage
of natural resources.
For more information about the recycling of this product, please contact your local city offi ce,
waste authority, approved scheme or your household waste disposal service or visit
www.canon-europe.com/weee, or www.canon-europe.com/battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
The model number is PC2047 (including WLAN module model WM223). To identify your
model, check the label on the bottom of the camera for a number beginning with PC.
Countries and Regions Permitting WLAN Use
- Use of WLAN is restricted in some countries and regions, and illegal use may be punishable
under national or local regulations. To avoid violating WLAN regulations, visit the Canon
website to check where use is allowed.
Note that Canon cannot be held liable for any problems arising from WLAN use in other
countries and regions.
Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certifi cation labels from the product
Do not use the wireless LAN function of this product near medical equipment or other
electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
This product is installed with the WLAN Module which is certifi ed to
standards set by IDA Singapore. Hereby, Canon Inc., declares that
this WM223 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. Please contact the
following address for the original Declaration of Conformity:
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
© CANON INC. 2014
