Chevrolet 2006 Corvette Manual 

Overview .................................................. 1-2 Features and Controls ..................................... 2-1 Features and Controls ................................ 2-2 Navigation Audio System ................................ 3-1 Navigation Audio System ............................ 3-2 Voice Recognition ........................................... 4-1 Voice Recognition ...................................... 4-2 Index .................................................................1 2006 Chevrolet Corvette Navigation Manual M

CHEVROLET, the CHEVROLET Emblem, the name CORVETTE, and the CORVETTE Emblems are registered trademarks of General Motors Corporation. The information in this manual supplements the owner manual. This manual includes the latest information available at the time it was printed. We reserve the right to make changes in the product after that time without notice. For vehicles first sold in Canada, substitute the name General Motors of Canada Limited for Chevrolet Motor Division whenever it appears in this manual. Keep this manual with the owner manual in the vehicle, so it will be there if it is needed. If the vehicle is sold, leave this manual in the vehicle. Canadian Owners For Canadian owners that would like to obtain a French language manual, see “Canadian Owners” in the Index of your vehicle’s owner manual. Litho in U.S.A. Part No. 10382039 A First Printing ©2005 General Motors Corporation. All Rights Reserved. ii

Getting Started ...............................................1-4 Cleaning the Display .....................................1-12 Section 1 Overview 1-1

under Using the Navigation System on page 2-2 for more information. B. SRCE (Source) Key. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. C. NAV (Navigation) Key. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. D. e / z (Audio/Screen Adjust) Key. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. E. QO SEEK R (Seek/Tune) Key. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. F. Power Volume Knob. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. G. X DVD (DVD Map Database Eject) Key. See “Installing the Map DVD” under Maps on page 2-3 for more information. H. XB (CD Eject) Key. See “CD Player on page 3-14 for more information. I. CD Slot J. DVD Map Database Slot K. Navigation System Screen L. X (Open/Close Faceplate) Key. See “Hard Keys” under Using the Navigation System on page 2-2 for more information. 1-3

read this manual thoroughly to become familiar with it and to understand how the system works. Keeping your mind on the drive is important for safe driving. See “Defensive Driving” in the Index of your vehicle’s owner manual for more information. Get familiar with your vehicle’s navigation system so you can use it with less effort and take full advantage of its features. Your navigation system includes not only navigation, but also audio functions. While your vehicle is parked: • Familiarize yourself with all of its controls: hard keys on the faceplate and touch-sensitive screen buttons. • Familiarize yourself with its operation. • Set up your audio by presetting your favorite stations, setting the tone, and adjusting the speakers. Then, when driving conditions permit, you can tune to your favorite stations using the presets and steering wheel controls (if equipped). • Set up the navigation features that can only be done before you begin driving, such as entering an address or a preset destination. Entering a destination or alphanumeric text requires many steps, so you can only perform these operations when the vehicle is in PARK (P). You will notice that touch-sensitive screen buttons leading to the alphanumeric keyboard are dimmed out while driving. Other functions may also be locked out while driving and they too will appear grayed out on the screen — but all functions are available when parked. Some functions can be performed while driving, as long as you can do so without diverting too much of your attention from your driving. {CAUTION: This system provides you with a far greater access to audio stations and song listings. Giving extended attention to entertainment tasks while driving can cause a crash and you or others can be injured or killed. Always keep your eyes on the road and your mind on the drive — avoid engaging in extended searching while driving. 1-4

screen frequently or for too long while driving can cause a crash and you or others can be injured or killed. Keep your eyes and mind on the road and avoid looking too long or too often at the moving map on the navigation screen. Use the voice guidance directions whenever possible. The navigation system allows you to do the following: • Plan a route with provided turn-by-turn route and map guidance with voice prompts. • Select a destination using various methods and choices. • Receive broadcast announcements on traffic and emergency alert communications. The information in the system may not always be complete. Road conditions such as prohibited turns, detours, and construction zones, change frequently. It is important to consider whether you can follow the directions given by the system for the current conditions. Each time you enter the navigation system, the CAUTION screen will display. Touch Agree to proceed into the system. For information on changing the language, see “Driver Information Center (DIC)” in the Index of your vehicle’s owner manual. When getting started, you may set the navigation system to your preference using various options. You will also need to know how to perform various functions to begin route guidance. Reference the following topics for further information: 1-5

To set preset radio stations, do the following: 1. Press the power/volume knob to turn the system on. 2. Press the SRCE hard key and select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped)). 3. Use the TUNE/SEEK arrows to tune to the desired station. 4. Press and hold one of the six preset screen buttons, at the bottom of the screen, until you hear a beep or see the station displayed on the selected preset button. 5. Repeat the steps for each preset. See “Preset Station Menu” under Navigation Audio System on page 3-2 for more information. Setting the Time To set the time, do the following: 1. Press the power/volume knob to turn the system on. 2. Press and hold the time display in the upper right corner of any screen. 3. Select the 12H or 24H screen button to display the time in standard or military time. 4. Press and hold the Hour and Min. (minute) arrow buttons to increase or to decrease the time. 5. Select the appropriate time zone screen button. 6. Select the Daylight Saving Time screen button, if necessary. The radio will use the GPS satellite to set the time. The vehicle needs to be in an open area to receive the signal. See “Clock” under Navigation Audio System on page 3-2 for more information. 1-6

Address and Point of Interest, and Storing a Home Destination and Preset Destinations Before entering an Address, Point of Interest, Home, or Preset Destination, select the appropriate region that contains the final destination. Your vehicle must be stopped to perform this operation. Setting the Region To set the region, do the following: 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the < Enter Destination screen button. 6. Press the Region screen button. 7. Select the appropriate region numbered screen button that contains your final destination. The system will return to the Enter Destination menu. See Enter Destination on page 2-11 for more information. Entering an Address To set a destination by entering a street address, do the following: 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the < Enter Destination screen button. Verify that the selected Region is correct. 6. Press the 2 Address screen button. 1-7

the screen. Do not enter directional information or street type, and use the space symbol screen button (U) between street or city names. For example, the street name N. Royal Oak Rd. should be entered as royalUoak. Use the backspace (V) screen button if an incorrect character has been entered. 8. Select the desired street name with the correct designation (Dr., Ln., St., etc.) from the list. 9. If there is more than one city, the system will display the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name. 10. Enter the house number using the numeric keypad on the screen and touch the OK screen button. A map screen will appear with the destination marked. 11. Select the h (destination) symbol screen button. 12. Select the Guide screen button. 13. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode. See “Address” under Enter Destination on page 2-11 for more information. Entering a Point of Interest (POI) To set a destination by entering a Point of Interest (POI), do the following: 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the < Enter Destination screen button. Verify that the selected Region is correct. 6. Press the K Point of Interest screen button. 7. Enter the specific title of the POI in the Name space (i.e. Washington Monument) using the alpha keypad on the screen. 8. Select the POI from the list. 9. If there is more than one city, the system will display the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name. A map screen will appear with the destination marked. 1-8

11. Select the Guide screen button. 12. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode. Using the Category or City selections will aid the system in finding your POI by limiting the search options. See “Point of Interest (POI)” under Enter Destination on page 2-11 for more information. Storing a Home Destination 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the N Stored Locations screen button. 6. Press the L Home screen button. 7. Press the Add screen button. 8. Press the Address screen button and enter all address information. 9. Press the OK screen button. A map screen will appear with the destination marked. 10. Press the OK screen button. 11. Press the back arrow screen button. The L Home icon will be highlighted on the Enter Destination screen. See “Using Your Home or Preset Destinations” later in this section for more information. 1-9

1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the N Stored Locations screen button. 6. Press the & Previous Dest. screen button. 7. Press the Add screen button, then select the numbered preset button for the destination to appear as. 8. Press the Address screen button and enter all address information. 9. Press the OK screen button. A map screen will appear with the destination marked. 10. Press the OK screen button. 11. Press the back arrow screen button. The numbered preset destination will be highlighted on the Enter Destination screen. See “Using Your Home or Preset Destinations” next in this section for more information. Using Your Home or Preset Destinations These destinations are available for selection while driving. 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the < Enter Destination screen button. 1-10

preset destination symbols. A map screen will appear with the destination marked. 7. Select the h (destination) symbol screen button. 8. Select the Guide screen button. 9. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode. Canceling Guidance Guidance will be canceled once you arrive at your final destination. To cancel guidance prior to arrival at the final destination, do the following: 1. Press the NAV hard key to access the map screen. 2. Press the MENU screen button on the map screen. 3. Press the E Route Options screen button. 4. Press the Cancel Guidance screen button. 5. Press the Yes screen button to confirm cancellation. Stored Locations Once a destination has been stored, the address information can then be edited and deleted. See Stored Locations on page 2-30 for more information on other features that can be stored, edited, and deleted. To delete the stored home destination, do the following: 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the N Stored Locations screen button. 6. Press the L Home screen button. 7. Press the Delete screen button. 8. A confirmation pop-up screen will appear: select Yes to delete; select No to cancel the operation. 1-11

do the following: 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-3 for more information. 3. A notice may appear. Touch the Agree screen button to proceed. If the radio is already on with a map disc inserted, press the NAV hard key. 4. Press the MENU screen button. 5. Press the N Stored Locations screen button. 6. Press the $ Dest. & Way Pt. or the & Previous Dest. screen button. 7. Press the Delete screen button, then select the way point or the numbered preset button to delete. 8. A confirmation pop-up screen will appear: select Yes to delete; select No to cancel the operation. Guidance Volume To adjust the volume of voice guidance prompts, do the following:. 1. Press the NAV hard key to access the map screen. 2. Press the MENU screen button on the map screen. 3. Press the I Navigation Set Up screen button. 4. Press the > Guidance Volume screen button. 5. Select the desired volume or select Off. The system will play back the new volume level. See “Guidance Volume” under Navigation Set Up on page 2-41 for more information. Cleaning the Display If the panel or the display is stained, wipe it with a dry, soft cloth, such as a silicon cloth. Notice: If you use abrasive cleaners when cleaning glass surfaces, you could scratch the glass. When cleaning the glass, use only a soft cloth and do not spray cleaner directly on the system. Do not apply spray cleaner directly to the system, the cleaner could affect the mechanical parts. Do not wipe the panel with a hard cloth or use a volatile liquid such as thinner or alcohol, it could scratch the surface or erase the characters. 1-12

Using the Navigation System ...........................2-2 Maps ............................................................2-3 Symbols ........................................................2-5 Nav. (Navigation) Menu .................................2-11 Enter Destination ..........................................2-11 Stored Locations ...........................................2-30 Navigation Set Up .........................................2-41 Route Options ..............................................2-49 Keyless Access System .................................2-55 Global Positioning System (GPS) ....................2-55 Vehicle Positioning ........................................2-56 Problems with Route Guidance .......................2-57 If the System Needs Service ..........................2-58 Ordering Map DVDs ......................................2-58 Database Coverage Explanations ....................2-58 Section 2 Features and Controls 2-1

Using the Navigation System This section presents basic information to operate the navigation system. Use the hard keys located on the navigation system along with the available touch screen buttons on the navigation screen to operate the system. See Navigation System Overview on page 1-2 for more information. Once the vehicle is moving, various functions will be disabled to reduce driver distractions. Hard Keys The following hard keys are located on the navigation system: X (Open/Close Faceplate): Press this key located at the bottom of the Navigation Screen to open or close the faceplate. XB (Eject CD): Press the eject CD key next to the CD loading slot to eject CDs. See CD Player on page 3-14 for more information. X DVD (Eject Map Database DVD): Press the eject DVD key next to the DVD loading slot to eject the map DVD. See “Installing the Map DVD” under Maps on page 2-3 for more information. Power/Volume Knob: Press the power/volume knob to turn the audio and navigation systems on and off. Turn the knob to increase or decrease the volume to the audio system. g (Voice Recognition): Press this key to activate the voice recognition system. See Voice Recognition on page 4-2 for more information. NAV (Navigation): Press this key to access the map screen. If this key is pressed when a map screen is displayed and you are in route guidance, the system will repeat the last voice command. SRCE (Source): Press this key to access the audio source screen. See Navigation Audio System on page 3-2. e / z (Audio/Screen Adjust): Press this key to access the Audio Adjust and Screen Adjust screens. See Navigation Audio System on page 3-2. QO SEEK R (Seek/Tune): Press the seek/tune arrows to go to the next or previous radio station and stay there, or to tune in a station. See Navigation Audio System on page 3-2. 2-2

numbers will be displayed on the navigation screen as an alpha or numeric keypad. The alpha keypad will be displayed when the system needs input of a city or street name. Touch the Sym. (symbol) screen button at the bottom of the alpha keypad to access the numeric keypad when inputting a house address, punctuation mark, or other character. Touch A - Z to return to the alpha keypad. All characters are touch-sensitive screen buttons. Touch a character to select it. U (Space): Touch this screen button to enter a space between characters or the words of a name. V (Back space): Touch this screen button if an incorrect character has been selected. To make name selections easier, the system will only allow you to select a character which can follow the last one entered. For example, if a Z is entered, a T will not be available to select. The system will highlight the available characters. If a name is not available after input, it may need to be inputted differently, the map DVD database may not contain that information, or the correct search area has not been selected. See Database Coverage Explanations on page 2-58 for more information. Touch-Sensitive Buttons Touch-sensitive buttons, or screen buttons, are located on the screen. When a screen button has been selected, a beep will sound. These buttons will be highlighted when a feature is available. There are also some toggle screen buttons that will be light color when active. Maps This section includes basic information that you need to know about the map database. Regional Maps The maps are stored on a DVD. The 48 contiguous United States and portions of Canada are contained on one disc. If a regional map does not contain a specific city, the map DVD may not contain the city or it may be misspelled. Refer to the Navigation System Map Disc manual to view a detailed explanation of map coverage and detailed city lists in each region. This manual will be in the map DVD case when the vehicle is delivered from the factory. 2-3

When your vehicle is delivered from the factory, the dealer may have installed the map DVD. If the map DVD was not installed, do the following: Read the following steps completely before operating this feature. 1. Turn the ignition on. 2. Push the Z (open/close faceplate) button and the faceplate will open. 3. Load the map DVD into the DVD slot by inserting it partway. The system will pull it in. 4. Wait until the DVD is loaded properly and then push the Z(open/close faceplate) button to close the faceplate. Once the map DVD is inserted correctly, the system will display the CAUTION screen. Agree: Touch this screen button to proceed to the navigation system. The map will appear showing your current vehicle position. Setting the Search Area See Enter Destination on page 2-11 for information on changing the search area. Map Adjustments The system allows you to adjust the scale of view on the map. Also, as you drive, the map will scroll automatically based on the direction you are traveling. Map Scales To view a larger or smaller scale of the map, touch the map scale arrows. You can change the level of map detail by either zooming in or zooming out using the arrow screen buttons or by touching the scale on the bar. The system will adjust the map accordingly. The scale of a map can range from 1/32 of a mile (0.05 km) to 128 miles (256 km). 2-4

Touch anywhere on the map screen twice and the scroll symbol will appear. Use this feature to scroll across the map. If scrolling while your vehicle is in PARK (P), the system will scroll initially at a slower rate. It will increase if you continue touching the map screen. If scrolling while your vehicle is in motion, the system will scroll to that location and stop. If you have used the scroll feature to scroll the map and your vehicle icon becomes lost, press the NAV (navigation) hard key to return to the current vehicle location on the map. You can use the scroll feature on the map to set a destination. See “Map” under Enter Destination on page 2-11 for more information. Symbols The following symbols are the most common symbols that will appear on a map screen. Your vehicle is shown as this symbol. It indicates the current position and heading direction of your vehicle on the map. This symbol will appear on the map after a route has been planned marking your final destination. 2-5

been planned, you will see this symbol on the map. The waypoint symbol will be numbered from 1 through 5 depending on how many waypoints have been set. This symbol indicates the distance to the final destination. It only appears when time is not available. This symbol indicates the distance and the estimated time remaining to the final destination or arrival time, depending on the option selected. See Navigation Set Up on page 2-41 for more information. This symbol shows the straight-line distance to the final destination. This symbol may appear before you start driving on the route or if you are on a road where navigation guidance cannot be given. See Database Coverage Explanations on page 2-58 for more information. 2-6

the map with North Up (North Up mode). While in North Up mode, North will always be at the top of the map screen regardless of which direction the vehicle is traveling. Touch this screen symbol to switch between North Up and Heading Up modes. This Heading Up mode symbol indicates the map with the vehicle travel direction up. The shaded triangle indicates the North direction. While in Heading Up mode, the direction your vehicle is traveling will always be at the top of the map screen. The vehicle icon will always be headed in the direction your vehicle is traveling. Touch this screen symbol to switch between Heading Up and North Up modes. This No GPS symbol will appear in the upper right corner of the map screen when your vehicle is not receiving a Global Positioning System (GPS) satellite signal. See Global Positioning System (GPS) on page 2-55 for more information. When a name is too long to be displayed, an arrow symbol will appear. Touch the right or left arrow screen button to scroll through the entire name. This symbol indicates the position of the next guidance maneuver. 2-7

the current route as the destination. Touch this symbol to enter a waypoint along the current route. Touch this symbol to store the location on the screen as a memory point. Map Appearance Select this symbol from the map screen to display the map appearance options. Select from one of the following six options that allow you different views and information of the map screen. Availability of these options depends on the current route. The current view will be highlighted. Select the single map mode to display more of the map with a window that gives the direction and distance to the upcoming maneuver. 2-8

symbol to display two map screens that will allow different scale levels and heading direction for each window. Touch anywhere inside the right screen and the EDIT RIGHT SCREEN screen will display. Change the scale level, 2D and 3D view, and to turn the POIs on and off. To change the heading direction, touch the north up or heading up symbol. Select the turn list symbol to display the next three upcoming maneuvers on the map screen when on route guidance. Directional arrows, street name, and distance to the next turn will display. As you approach the next turn, the system will automatically display a zoomed-in view of the upcoming maneuver. Select the arrow guidance symbol to display the next turn on the map screen when on route guidance. Directional arrows, street name, and distance to the next turn will display. As you approach the next turn, the system will automatically display a zoomed-in view of the upcoming maneuver. Select this symbol to display only the next maneuver along with a small map of the maneuver. When approaching the next maneuver, the system will display a guidance window of the maneuver. This option can be turned off by the USER SETTINGS screen. 2-9

guidance symbol to display highway guidance on the map screen. The upcoming exit number, distance to the exit, available POIs at the exit, and a window with the direction and distance to the next maneuver will display. Use the up and down arrows to scroll through the list. To view the available POIs for an exit, select the exit, then select the Map screen button. The system will display highway guidance any time you have a planned route on a highway or freeway. To turn this feature off, see “User Settings” under Navigation Set Up on page 2-41 for more information. Auto Reroute When a destination has been set and you are off of the planned route, the system will automatically plan a new route. The new route will be highlighted on the screen. Traveling Across Regions When driving through regions, the map screen will update to display your current location. To plan a destination in a different region, you must change the region for the map DVD to access the correct information. To do so, do one of the following: 1. Change the selected region in the search area when you get closer to the area you are traveling to. See Enter Destination on page 2-11 or, 2. Change the selected region in the search area when entering your destination and route settings. See Enter Destination on page 2-11. For example, if you were traveling from Michigan to Florida, make sure that Florida is included on the selected region. Enter a destination in Florida under the ENTER DESTINATION menu. 2-10

Press the NAV hard key to access the map screen. Press the MENU touch screen button on the map screen. From this screen all of the navigation system features can be accessed. Enter Destination Press the < Enter Destination screen button to access the ENTER DESTINATION screen. From this screen, several options are available to plan a route by entering destination points. Once a destination entry is complete, regardless of which method was used, a map screen with the destination previewed will display. You can change route preferences, route options, map appearances, or add a waypoint at this time. You may also set the destination without making any further changes. See “Getting Started on Your Route” later in this section for more information on your choices once a destination has been entered. This menu has two pages. To view the second page, press the 1/2 arrow button. 2-11

the United States and a part of Canada divided into 11 regions. Before selecting a destination entry method, review the search area map to make sure your destination is located in the highlighted region. Touch the Region screen button from the ENTER DESTINATION screen to see a list of states included in the highlighted region, or to change the region. The SEARCH AREA screen will display. Touch the numbered screen button to the left of the search area map that corresponds with the numbered region you wish to select or to view a list of states included in that region. Touch the down arrow to the left of the search area map to select CAN (Canada). Once the region has been selected, the region will be highlighted on the map. Touch the back key to return to the ENTER DESTINATION screen. 2-12

input an address by providing the system with a street name or city. 2 Address: Touch this screen button to access the ADDRESS screen. You can enter the address one of two ways: street first or city first. To input the street name first, do the following: 1. Touch the Street screen button from the address menu and start inputting the street name using the alpha keypad. A list of available street names will automatically display if there are less than five street names available. Select the List screen button at any time to view the available street names. The box at the end of the Street entry field will contain the number of street names available in the current generated list. 2. Select the desired street name with the correct designation (Dr., Ln, St., etc.) from the list. 3. If the system determines that the street is found in only one city within the search area that city will automatically be selected. If there is more than one city, the system will display the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name. 4. The house number screen will display, enter the house number using the numeric keypad. 5. Once the correct house number is selected, press the OK screen button. A map screen will appear with the destination marked. 6. Select the h (destination) symbol screen button. 7. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-13

1. Touch the City screen button. 2. Select from the choices shown on the city screen: Any City, 5 Nearest Cities, Input City Name, or from the Last 5 Cities used. • Any City — The system will request input of a street name, then generate a list of all cities containing that street name. Select a city from the list. • 5 Nearest Cities — The system will display a list of five cities closest to your vehicle’s current position. Select a city from the list. • Input City Name — The keypad will display for inputting the city name. Input the city name and then select the city from the list. • Last 5 Cities — The city names of the last five cities that were stored as a previous destination will display. Select a city from the list. 3. The screen to input the street name and house number will display. Input the street name using the alpha keypad. A list of available street names will display if there are less than five street names available. Select the List screen button at any time to view the available street names. The box at the end of the Street entry field will contain the number of street names available in the current generated list. 4. Select the desired street name with the correct designation (Dr., Ln, St., etc.) from the list. 5. The house number screen will display, enter the house number using the numeric keypad. Once the correct house number is selected, a map screen will appear with the destination marked. 6. Select the h (destination) symbol screen button. 7. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-14

The Point of Interest (POI) destination entry method allows you to select a destination from the POI list. K Point of Interest: Touch this screen button from the ENTER DESTINATION screen to access the POINT OF INTEREST screen. This screen has three options to select/input the destination. Either input the name of the POI using the alpha keypad, select a category from the category list, or select the city by selecting the City screen button. To input the POI name, do the following: 1. Use the alpha keypad to enter the POI name. Touch Sym. (symbol) to select symbols and numbers for the POI, touch Others to select special characters for the POI, or touch A - Z to return to the alpha keypad. A list of POIs will appear using the information from the alpha keypad input. A list of available POIs will display when there are less than five POIs available. Touch the List screen button at any time to view the available POIs. 2. Select the desired POI from the list. 3. If the system determines that the POI is found in only one city within the search area that city will automatically be selected. If there is more than one city, the system will display the list of cities that have a POI with that name. Select a city from the list or select the Input Name screen button to input the city name. Once all of the information is selected, a map screen will appear with the destination marked. 4. Select the h (destination) symbol screen button. 5. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-15

1. Touch the Category screen button from the POINT OF INTEREST screen to view a list of POI categories. 2. Select a category, and then a sub-category. 3. The system will display available POIs in the selected sub-category or if the list is too long the system will display the alpha keypad. 4. If the alpha keypad is displayed, input the POI name until a list of available POIs appear. 5. Select the POI from the list. 6. If the system determines that the POI is found in only one city within the search area that city will automatically be selected. If there is more than one city, the system will display the list of cities that have a POI with that name. Select a city from the list or select the Input Name screen button to input the city name. Once all of the information is selected, a map screen will appear with the destination marked. 7. Select the h (destination) symbol screen button. 8. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-16

following: 1. Select the City screen button, then select: Any City, 5 Nearest Cities, Input City Name, or from the Last 5 Cities used. • Any City — The system will request input of a POI name, then generate a list of all cities containing that POI name. Select a city from the list. • 5 Nearest Cities — The system will display a list of five cities closest to your vehicle’s current position. Select a city from the list. • Input City Name — The keypad will display for inputting the city name. Input the city name and then select the city from the list. • Last 5 Cities — The city names of the last five cities that were stored as a previous destination will display. Select a city from the list. 2. Use the alpha keypad to enter the POI name. Touch Sym. (symbol) to select symbols and numbers for the POI, touch Others to select special characters for the POI, or touch A - Z to return to the alpha keypad. 3. A list of POIs will appear using the information from the alpha keypad input. A list of available POIs will display when there are less than five POIs available. Touch the List screen button at any time to view the list of available POIs. 4. Select the desired POI from the list. A map screen will appear with the destination marked. 5. Select the h (destination) symbol screen button. 6. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-17

a destination by scrolling on the map. I Select from Map: Touch this screen button from the ENTER DESTINATION screen to enter the map destination entry method, then do the following: 1. Touch the map for the desired area you wish to set as your destination. 2. Use the zoom in/out function to view the direction of the desired area. 3. Pressing/holding and dragging on the map will activate fast scrolling. Press/touch once on the area to which you would like to move the current position mark. Once the scroll symbol is on the location, the address information will display on the map screen. 4. Select the h (destination) symbol screen button. 5. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-18

enter a destination by selecting from three categories: Police Station, Hospital, or Dealer. | Emergency: Touch this screen button from the ENTER DESTINATION screen to access the EMERGENCY screen. The system will display the address, longitude, and latitude information of your vehicles current position. To use this destination entry method, do the following: 1. Select a category. A list of destination(s) will display with the name of the destination and the distance from your vehicle’s current position. 2. Select a destination point from the list. Touch Name Sort to sort the list by name, or Dist Sort to sort the list by distance from the vehicle’s current position. After selecting a destination from the list, a map screen will appear with the destination marked. 3. Select the h (destination) symbol screen button. 4. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-19

to select a destination from a list of points that have been previously stored. To store, edit, and delete memory points see Stored Locations on page 2-30 for more information. N Memory Point: Touch this screen button from the DESTINATION ENTRY screen to access the MEMORY POINTS screen. To use this destination entry method, do the following: 1. Select the category/folder in which the memory point has been stored. Select from PERSONAL, BUSINESS, ENTERTAINMENT, or MARKED POINT folders. 2. Sort the list by distance, icon, name or date stored. 3. Select the desired memory point. After selecting a memory point from the list, a map screen will appear with the destination marked. 4. Select the h (destination) symbol screen button. 5. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-20

to select a destination from a list of previous destination points. h Previous Destination: Touch this screen button from the ENTER DESTINATION screen to access the PREVIOUS DEST screen. The system will store up to 100 points that have been previously input. As new destinations are entered, the system will automatically delete the oldest destinations and add the new entries. To use the previous destination entry method, do the following: 1. Select a previous destination from the list. Use the Sort by Name/Date function as necessary. Also from this menu you can select the previous start point option. This option is available while the vehicle is moving. To use the previous start point option from the PREVIOUS DEST screen, select the Previous Start Point screen button. 2. After selecting a destination from the list, a map screen will appear with the destination marked. 3. Select the h (destination) symbol screen button. 4. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-21

set two intersecting streets as your destination. ? Intersection: Touch this screen button from the ENTER DESTINATION screen to access the INTERSECTION screen. To use this destination entry method, do the following: 1. Enter the first of two streets in the intersection. A list of available street names will display when there are less than five available. Touch the List screen button at any time to view the available street names. 2. Select a street from the list, or continue to spell the street name to further reduce the number of available street names. 3. After the first street has been selected, enter the second street name. The List button may again become available. 4. Select the second street from the list, or continue to spell the street name to further reduce the number of available street names. After both streets have been selected, a map screen will appear with the destination marked. 5. Select the h (destination) symbol screen button. 6. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-22

allows you to select a destination by entering a freeway entrance or exit point. = Freeway Ent (Entrance)/Exit: Touch this screen button from the ENTER DESTINATION screen to access the FREEWAY ENT/EXIT screen. To use this destination entry method, do the following: 1. Enter the freeway name. Use abbreviations, such as I - 75, rather than spelling out Interstate. The system will display a list of freeways. 2. Select a freeway from the list, and select whether you want an entrance point or an exit point. Select an exit/entrance point from the list or input the point by name. Sort the list by name or by distance. After selecting a point from the list, a map screen will appear with the destination marked. 3. Select the h (destination) symbol screen button. 4. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-23

to select a destination by entering a phone number. The phone number must be in the list of POIs that is contained on the map DVD for the system to retrieve the destination. U Phone Number: Touch this screen button from the ENTER DESTINATION screen to access the PHONE NUMBER screen. To use this destination entry method, do the following: 1. Input the phone number of a POI using the numeric keypad. If the phone number can be found on the map DVD, a map screen will appear with the destination marked. If the phone number is dependent on the area code, a list of POIs will appear to select from. Once a POI is selected, a map screen will appear with the destination marked. 2. Select the h (destination) symbol screen button. 3. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-24

select a destination by entering latitude and longitude coordinates. ) Coordinates: Touch this screen button from the ENTER DESTINATION screen to access the COORDINATES screen. To use this destination entry method, do the following: 1. Touch N (North) or S (South) next to LAT (latitude) to enter the direction of the latitude coordinate. 2. Input the numeric portion of the latitude coordinate using the keypad. 3. Touch E (East) or W (West) next to LONG (longitude) to enter the direction of the longitude coordinate. 4. Input the numeric portion of the longitude coordinate using the keypad. 5. Once both coordinates are entered, touch the OK screen button. A map screen will appear with the destination marked. If the coordinates are outside of the coverage area on the map, you will be informed that there is no information on that location. 6. Select the h (destination) symbol screen button. 7. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-25

destination by choosing from one of five previously stored destinations. Besides home, these are the only destinations available to set while the vehicle is moving. To store, edit, or delete a preset destination, see “Dest. & Way Pt. (Destination & Way Point” under Stored Locations on page 2-30. To use this destination entry method, do the following: 1. Select a preset destination number button from the ENTER DESTINATION screen. The screen buttons are located on the bottom of the screen. A map screen will appear with the destination marked. 2. Select the h (destination) symbol screen button. 3. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. Home This feature allows you to plan a route to one previously stored destination that you have selected as a home. If a home destination is not stored, the home button will not be available. Besides preset destinations one through five, this destination is the only other one available to set while the vehicle is moving or by voice recognition. To store, edit, or delete a home location, see Stored Locations on page 2-30. L(Home): Touch this screen button from the ENTER DESTINATION screen to set a home destination. To use this destination entry method, do the following: 1. Touch the Home button from the ENTER DESTINATION screen. 2. The system will then set your preset home destination as the current destination. To store a preset home destination, see Stored Locations on page 2-30. A map screen will appear with the destination marked. 3. Select the h (destination) symbol screen button. 4. Select the Guide screen button. See “Getting Started on Your Route” later in this section for more information. 2-26

Once a destination has been entered, you can perform one of the following options: h (Destination): Touch this button to set the entered destination as it is, without further adjustment. o (Waypoint): Touch this button to enter this point as a waypoint along the route. This feature allows you to enter up to five stops on the way to your destination. See “Dest. & Way Pt. (Destination & Way Point)” under Stored Locations on page 2-30 for more information about adding and deleting waypoints. Route Preference: Touch this screen button to access the ROUTE PREFERENCES screen to adjust the route preferences. The current setting is displayed in the Route Preference section of the map screen. See “Route Pref.” under Route Options on page 2-49 for more information. Once the route preferences have been set, the system will display the map screen. 2-27

screen buttons will become available. Chg. (Change) Route: Touch this screen button to go to the Route Options menu. See Route Options on page 2-49 for more information. Guide: Touch this screen button to start route and voice prompt guidance. Three Routes The 3 routes screen will give you a selection of selecting three different routes to get you to your destinations. To use the 3 routes option, do the following: 1. Select the 3 routes button on the map screen. The system will calculate up to three different versions of your current route in three different colors: Quick, Normal, and Short. The routes are shown with distance to destination and estimated travel time, or select the Info screen button to access the INFO FOR 3 ROUTES screen. 2-28

• G (Estimated Travel Time) — This icon shows the route’s estimated time of travel. • J (Straight-Line Distance) — This icon shows the route’s straight-line distance to destination. • W (Toll Road) — This icon shows the distance traveled on toll roads. • c (Freeway Travel) — This icon shows the distance traveled on freeways. • b (Ferry) — This icon shows the distance traveled by ferry. • { (Time Restricted Roads) — This icon shows the distance traveled on time-restricted roads. 2. Select the Quick, Normal, or Short screen button. A map screen will appear with the destination marked. 3. Select the Guide screen button to start route and voice guidance. 2-29

NAV. MENU to access the STORED LOCATIONS screen. From this screen, you can access the following options: Memory Points N Memory Points: This feature allows you to store memory points. You can store them in the four categories listed: Personal, Business, Entertainment, and Marked Point. These category names can be changed for your convenience. To store a point: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select one of the folders/categories listed. 3. Select the Add screen button. 4. Select the desired method of entering a destination to enter the memory point. See Enter Destination on page 2-11 for more information. A map screen will appear displaying the selected memory point location. 5. If available, touch the INFO button to view the address information of the selected point. 6. Touch OK to store the point as a memory point. 2-30

1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point exists in. 3. Select the List screen button. 4. Select the memory point to edit. Use the sort feature to sort by distance, icon, name, or date as needed. 5. Touch the Name screen button from the EDIT MEMORY POINT screen. 6. Use the backspace screen button to delete the current name or use the alpha keypad to make changes. Select the Show Name On screen button to have the name of the point appear on the map screen. 7. Touch the back screen button to store the change. To change the icon associated with a memory point: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point exists in. 3. Select the List screen button. 4. Select the memory point to edit. Use the sort feature to sort by distance, icon, name, or date as needed. 5. Touch the Icon screen button from the EDIT MEMORY POINT screen. 6. Select the desired icon. There are two pages (52) icons, six icons that have sounds associated with them, and a No Icon button to select from. Select the With Sound screen button, and the sound icons will display. To hear the sound of the icon, touch the Sound screen button next to each icon. If the sound icons are used, the associated sound will be heard when the vehicle is approximately 650 ft (200 m) from the memory point. Select the No Icon screen button to not have an icon associated with the point. The new icon will display in the EDIT MEMORY POINT screen, next to the Icon screen button. 7. Touch the back screen button to store the change. 2-31

another: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point currently exists in. 3. Select the List screen button. 4. Select the memory point to edit. Use the sort feature to sort by distance, icon, name, or date as needed. 5. Touch the Category screen button from the EDIT MEMORY POINT screen. 6. Touch the new folder/category button you want to move the memory point to. The system will display a message confirming the move. To modify the position of the stored point: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point exists in. 3. Select the List screen button. 4. Select the memory point to edit. Use the sort feature to sort by distance, icon, name, or date as needed. 5. Touch the Position screen button from the EDIT MEMORY POINT screen. The system will display the map screen with the destination marked. 6. Touch the map to move the position of the memory point. 7. Touch OK when you have moved the memory point to the appropriate location. 8. The system will return to the EDIT MEMORY POINT screen and will display the new address, longitude, and latitude for the changed memory point. 2-32

1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point exists in. 3. Select the List screen button. 4. Select the memory point to edit. Use the sort feature to sort by distance, icon, name, or date as needed. 5. Touch the Tel. (telephone) screen button from the EDIT MEMORY POINT screen. 6. Use the numeric keypad to change the phone number. 7. Touch OK to store the changed phone number. To delete a memory point: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the folder/category that the memory point exists in. 3. Select the Delete screen button. 4. Select the memory point to delete from the DELETE POINT screen. Use the sort feature to sort by distance, icon, name or date as needed. 5. The system will display the map screen with the position address and a pop-up confirmation message. Select Yes to delete the point; select No to return to the DELETE POINTS screen and not delete the point. To delete all of the memory points in a folder/category: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the desired folder/category. 3. Select the Del.All screen button. 4. The system will display a pop-up confirmation message. Select Yes to delete all the points in the folder/category; select No to cancel the operation. To change the name of the folder/category: 1. Touch the Memory Points screen button from the STORED LOCATIONS screen. 2. Select the desired folder/category. 3. Select the Edit Category screen button. 4. Use the alpha keypad to change the name of the folder/category. 5. Touch the OK screen button to save the changes. 2-33

area to be avoided while planning a route. Up to 10 points can be stored. To store an avoid area point, do the following: 1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. 2. Touch the Add screen button from the AVOID AREA screen. 3. Select the desired method of entering a destination to enter the memory point. See Enter Destination on page 2-11 for more information. A map screen will appear displaying the selected memory point location. 4. If desired, reduce or enlarge the area around the point you want to avoid by using the Reduce or Enlarge screen buttons. It is recommended that when avoiding locations on freeways, you reduce the avoid area to the minimum scale. This will produce an X on the map rather than a box. This will ensure that the system knows you want to avoid the freeway itself, not necessarily the area around the freeway. 5. Touch OK to store the area. 2-34

1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. 2. Touch the List screen button from the AVOID AREA screen. 3. Select the point to be changed. 4. Touch the Name screen button. 5. Use the alpha keypad to add or to change the name. Select the Show Name On screen button to have the name of the point appear on the map screen. 6. Touch the OK screen button to save the changes. To change the position of the point to be avoided: 1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. 2. Touch the List screen button from the AVOID AREA screen. 3. Select the point to be changed. 4. Touch the Position screen button. 5. Touch the map to move the location. 6. If desired, reduce or enlarge the area around the point you want to avoid by using the Reduce or Enlarge screen buttons. 7. Touch OK to store the area. To delete a point to be avoided: 1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. 2. Touch the Delete screen button from the AVOID AREA screen. 3. Select the point to delete. Use the scrolling arrows as needed. 4. The system will display the map screen with the name of the point and a pop-up confirmation message. Touch Yes to have the point deleted; touch No to cancel the function. To delete all of the points to be avoided: 1. Touch the Avoid Area screen button from the STORED LOCATIONS screen. 2. Touch the Del.All screen button from the AVOID AREA screen. 3. The system will display a pop-up confirmation message. Touch Yes to have all of the points deleted; touch No to cancel the function. 2-35

6 Dest. & Way Pt. (Destination & Waypoint): Waypoints are destinations that can be added to your route before reaching the final destination. Waypoints can be added before or after entering a final destination. Waypoints that were entered prior to setting a final destination, will delete if a final destination has not been entered. Up to five points can be stored as waypoints. To add a waypoint: 1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. 2. Touch the Add screen button from the DEST. & WAY POINT screen. 3. Using the desired method of entering a destination, enter the way point. See Enter Destination on page 2-11 for more information. A map screen will appear with the way point marked. 4. Select the o (Way point) symbol on the map screen to save the way point. 5. Repeat Steps 2 - 6 to add up to five way points to your route. After the first waypoint has been saved, the ADD WAY POINT screen will appear and the waypoint will be on the screen. The second through the fifth waypoint will not appear on the ADD WAY POINT screen until the ADD button, next to the corresponding waypoint row, is pressed. After the ADD button has been pressed, the system will return to the STORED LOCATIONS screen. To change the order of the waypoints: 1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. 2. Touch the List screen button from the DEST. & WAY POINT screen. 3. From the CHANGE ORDER screen, select on the addresses, in the order you would like them to fall on the route. After selecting the address line, a number, indicating the order, will appear next to the corresponding row. 4. Select OK to save the changes. The system will return to the STORED LOCATIONS screen. 2-36

1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. 2. Touch the List screen button from the DEST. & WAY POINT screen. 3. Touch the Chg. Loc. screen button from the CHANGE ORDER screen. 4. From the CHANGE LOCATION screen, select the address of the location to change. A map screen will display with the destination marked. 5. Touch on the map to move the location of the waypoint. 6. Touch the OK screen button to save the changes. The system will return to the STORED LOCATIONS screen. To delete a way point from the current route: 1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. 2. Touch the Delete screen button from the DEST. & WAY POINT screen. 3. Select the way point/destination to delete. 4. The system will display a pop-up confirmation message. Choose Yes to delete the way point; touch No to cancel this operation. To delete all of the way points on the route: 1. Touch the Dest. & Way Pt. screen button from the STORED LOCATIONS screen. 2. Touch the Del.All screen button from the DEST. & WAY POINT screen. 3. The system will display the map screen with a pop-up confirmation message. Choose Yes to delete all of the way points; touch No to cancel this operation. 2-37

edit a home point destination. To store the home destination, do the following: 1. Touch the Home screen button from the STORED LOCATIONS screen. 2. Select the Add screen button. 3. Select a destination entry method from the SET HOME screen. See Enter Destination on page 2-11 for more information. 4. Set the destination and touch OK. 5. Touch OK on the map screen and the destination will be stored. The home icon will now be highlighted on the ENTER DESTINATION screen. To edit the home destination, do the following: 1. Touch the Home screen button from the STORED LOCATIONS screen. 2. Select List from the HOME screen to change the location. 3. Touch the map to move the location of the point. 4. Touch OK to save the change. To delete the home point, do the following: 1. Touch the Home screen button from the STORED LOCATIONS screen. 2. Select Delete from the HOME screen. 3. The system will display the map screen with a pop-up confirmation message. Select Yes to delete the stored home position; select No to cancel the operation. 2-38

system will automatically store up to 100 points that have been previously input. As new destinations are entered, the system will automatically delete the oldest destinations and add the new entries. See Enter Destination on page 2-11 for more information. To delete a specific destination from the previous destinations list, do the following: 1. Touch the Previous Dest. screen button from the STORED LOCATIONS screen. 2. Touch the Delete screen button. 3. Select a destination from the list. 4. The system will display the map screen with a pop-up confirmation message. Select Yes to delete the stored destination; select No to cancel the operation. To delete all destinations from the previous destinations list, do the following: 1. Touch the Previous Dest. screen button from the STORED LOCATIONS screen. 2. Touch the Del.All screen button. 3. The system will display the map screen with a pop-up confirmation message. Select Yes to delete all of the stored destinations; select No to cancel the operation. Preset Destination A Preset Dest. (Preset Destination): This feature allows you to store up to five preset destinations. These destinations are stored on the numbered buttons shown on the bottom of the ENTER DESTINATION screen. To store a preset destination, do the following: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select Add to add a preset destination, then select the numbered preset button for the destination to appear as. 3. Select a destination entry method from the STORE PRESET DEST. screen. See Enter Destination on page 2-11 for more information. 4. Set the destination and touch OK. 5. Touch OK on the map screen and the destination will be stored. The preset destination number will now be highlighted on the ENTER DESTINATION screen. 2-39

following: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the List screen button. 3. Select the preset destination to edit. 4. Touch the Name screen button and use the alpha keypad to edit or add the name. Select the Show Name On screen button to have the name appear on the map screen. 5. Touch the OK screen button to save the change. The new name will display. To change the position of a preset destination, do the following: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the List screen button. 3. Select the preset destination to change. 4. Touch the Position screen button from the EDIT PRESET DEST. screen. The system will display the map screen with the destination marked. 5. Touch the map to move the position of the memory point. 6. Touch the OK screen button to save the change. To add or change the phone number of a preset destination, do the following: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the List screen button. 3. Select the preset destination to change. 4. Touch the Tel. (telephone) screen button and use the numeric keypad to input or change the phone number. 5. Touch the OK screen button to save the change. To delete a preset destination: 1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the Delete screen button. 3. Select the memory point to delete from the DELETE PRESET DEST. screen. 4. The system will display the map screen with the position address and a pop-up confirmation message. Select Yes to delete the point; select No to cancel the operation and to return to the DELETE PRESET DEST. screen. 2-40

1. Touch the Preset Dest. screen button from the STORED LOCATIONS screen. 2. Select the Del.All screen button. 3. The system will display a pop-up confirmation message. Select Yes to delete all of the preset destinations; select No to cancel the operation. Memory Point Icons Display: Select this screen button to display memory point icons on the map. The button will be highlighted when the memory point icons are being displayed on the map. Calculate: Touch this button to calculate your route. This button is available after a destination has been set. Navigation Set Up Select the MENU screen button to access the NAV. MENU screen. I Navigation Set Up: Touch this screen button from the NAV. MENU screen to access the NAVIGATION SET UP screen. Several system options are available for adjustment. 2-41

NAVIGATION SET UP screen. This feature allows you to change the view of the map between a 2-dimensional and 3-dimensional view. Map Screen 2D/3D: This will change the view of all map screens. Guidance Screen 2D/3D: This will change the view of the map screen while driving during route guidance. n / q (Scroll Arrows): Select the up or down arrows to tilt the view of the map screen. 4 (Back): Select this screen button to save the changes. Default: Press this button to cancel your changes and go back to the default settings (2D and 2D). 2-42

C Quick POI Selection: This feature allows you to select the POI categories you want available on the Quick POI (Q-POI) screen. To replace the default POI categories on the Quick POI (Q-POI) screen, do the following: 1. Select the C Quick POI Selection screen button from the NAVIGATION SET UP menu. This screen will display the list of POI categories. 2. Select the POI category that you would like to change. The category to change will display with the list of categories to select from. Select the All Category List screen button to display all categories and sub-categories. 3. Select a different POI category. The POI category icon to change will be replaced with the new POI category icon at the top of the screen. This POI will now be available on the Q-POI screen. 2-43

SELECTION screen, the POI categories are now available on the Quick POI screen. From this screen you can select the POI icons that you would like to display on the map screen. You can either select a POI for a final destination or as a waypoint. The Quick POI screen is available when the scale is 1⁄2 mile (1 km) or less. To use the QUICK POI screen, select the POI screen button from the map screen. The POI categories that were selected on the Q-POI SELECTION screen will display. To have the POI icons appear on the map screen, select the POI category. The POI category icon will display at the top of the screen. List Categories: Select this screen button to display more categories to select from. 2-44

1. Select this screen button to select a POI as a destination. A list of all of the local POIs within a 5 mi. (8 km) radius of your vehicle’s current position will display. This list is generated from the POI categories that have been selected and appear at the top of the QUICK POI screen. Use the Sort by Dist. (distance), Icon, Name, or Route screen buttons. Use the up and down scroll arrow screen buttons to scroll through the list. 2. Select the POI. The map screen will display with the scroll symbol around the selected POI. The name and the POI information will also display on the map screen. 3. Select the h (destination) symbol screen button. 4. Select the Guide screen button. See “Getting Started on Your Route” for more information. All Category List: This screen button will appear once the List Categories screen button has been selected. Press this screen button to display a list of sub-categories. Show: Select this screen button to display the map screen. Delete: To delete a category, do one of the following: • To delete the last added POI category, select the Delete screen button. • To delete a specific POI category, select that POI category from the list. POI Off: Select this screen button to delete all of the POI categories in the list. 2-45

NAVIGATION SET UP screen. This feature allows you to recalibrate the navigation system. The Calibration screen, allows the adjustment of your vehicle’s position or the vehicle speed signal. To correct the position of your vehicle on the map (for example, if your vehicle has been shipped) or to change to the current position. 1. Select the Position/Direction screen button. The map screen will display with your vehicle’s current position. 2. To change your vehicle’s position, touch the map screen. Use the zoom in/out function to view the direction of the desired area. Pressing/holding and dragging on the map will activate fast scrolling. Press/touch once on the area to which you would like to move the current position mark. 3. Touch the OK screen button once your vehicle is in the current position. If a route had already been set, the map screen will display, select Guide to change your route to your vehicle’s new position. Once the process of changing your vehicle’s current position is complete, the map screen will display with rotate arrow screen buttons around your vehicle. 4. To change the direction of your vehicle, press either arrow screen button to rotate your vehicle to the correct direction. 5. Once your vehicle is facing the correct direction, select the OK screen button. See Problems with Route Guidance on page 2-57 for more information. If there are tire pressure differences or a spare tire is installed, the system will automatically re-calibrate the system but it may take longer. To calibrate the vehicle speed signal, touch the Distance screen button. See Vehicle Positioning on page 2-56 for more information. 2-46

NAVIGATION SET UP screen. This feature allows you to turn on and off several route options. From this screen, you can adjust the following: Road Restriction Warnings: This option instructs the system to notify you when the current route has traffic restrictions. Arrival Time G (Time of Arrival): This option will display the estimated time of arrival to the destination. Arrival Time \ (Time to Destination): This option will display the amount of drive time estimated to arrive at the destination. Guidance Screen: This option will turn the guidance screen on and off. Freeway Information: This option will display freeway exit information. This is only available on freeways during route guidance. 2-47

D Restore System Defaults: Select this feature from the NAVIGATION SET UP screen to change all adjustable system settings to factory defaults. OK: Select this screen button to restore the system defaults. Average speed Default: Select this option to set the average speed to default. The system monitors the speed on different roads and updates the average speed the vehicle travels at. This average speed is used to calculate the time it will take to reach the destination when you set a route. Guidance Volume > Guidance Volume: This feature allows you to adjust the volume of voice guidance prompts. Select Off to turn voice guidance prompts off. 2-48

access the ROUTE OPTIONS screen. This menu has many features to customize route guidance. A route must first be set to use these features. See Enter Destination on page 2-11 for more information on entering a destination. Search Condition H Search Conditn (Search Condition): This feature will access the SEARCH CONDITION screen. The search condition screen allows you to view your current destination and to change the planning methods between each destination. Each distance between waypoints and final destination can have an individual setting. n / q (Scroll Arrows): Use the up and down arrows to scroll through each route. Quick/Normal/Short: Select one of the route preference options to change the planning method. Calculate: After selecting the new methods, select Calculate to plan the route with the changes. The map screen will display. 2-49

work, or traffic delays that prevent the original route from being used. From this screen, you can select a 1 mile, 3 mile, or 5 mile detour or select to detour the whole route. After selecting the detour, the system will calculate the alternate route and the new route will display on the map screen. Route Preferences F Route Pref. (Route Preferences): You can select to have certain types of roads/ferries included in your route. See “Getting Started on Your Route” under Enter Destination on page 2-11 for more information. The following route preferences can be selected on or off: c (Allow Major Roads): This feature allows the system to use expressways when calculating a route. If there is no way to reach your destination without using major roads, the system will automatically include major roads. 2-50

the system to use time restricted roads when calculating a route. These are roads that may be closed during the winter season. W (Allow Toll Road): This feature allows the system to use toll roads or pay roads when calculating a route. b (Allow Ferry): This feature allows the system to use ferries when calculating a route. Calculate: Select this screen button to update the changes in the current route. The map screen will display. If any of these features are turned off, the button will be dark and there will be a red slash through the icon on the map screen. Once the route preferences have been set, select the back button to return to the previous screen. Destination and Waypoint o Dest. & Way Pt. (Destination and Waypoint): This feature allows you to edit the selected destination and waypoints using this screen. See “Dest. and Way Pt. (Destination and Way Point)” under Stored Locations on page 2-30 for information on storing destinations and waypoints. Up to five waypoints and one destination can be entered. The following functions are available: Add: This button will access the Store Dest. & Waypoint screen. You can add a waypoint or change the destination. List: Touch this button to change the order of the stops in the route and to change the location of the stops. Delete/Del. All: These buttons allow you to delete waypoints on the route or to delete the entire route. 2-51

OPTIONS menu to view the entire route. The start point and destination, the time it will take to reach the destination, and distance, including the distance that is routed on each road type will display. Turn List: Edit the route by selecting the Turn List screen button. A list of every turn on the route will display. With the turn list displayed, you can select to avoid streets/turns on the route. Avoid: To avoid a street, select the Avoid screen button next to the turn. To cancel the avoided turn, select Avoid again to deselect it. Reroute: After selections have been made, press the Reroute screen button to replan the route. Delete: To cancel an avoided turn after the route has been replanned, press the Delete screen button. A list of all of the avoided turns will display. Select the street that you want to add back to the route. A confirmation window will display. Select Yes to have the avoided street added back to the route. The Turn List screen will display. Del. All (Delete All): To cancel all of the avoided turns after the route has been replanned, press the Delete screen button. A list of all of the avoided turns will display. Select the Del. All screen button. A confirmation window will display. Select Yes to have all of the avoided streets added back to the route. The Turn List screen will display. 2-52

ROUTE OPTIONS menu to preview the entire route in either direction and to edit the route. Use the screen buttons at the bottom of the navigation screen to move through the route. bt (Skip to Start Point): Touch this screen button to skip backward to the start point, the previous waypoint, or the previous available POI, depending on the mode selected. bq (Scroll to Start Point): Touch this screen button to start a smooth scroll of the route backwards to the start point, previous waypoint, or the previous available POI, depending on the mode selected. Touch this button again to increase the scroll speed. j (Pause): Touch this screen button to pause the smooth scroll. Push either scroll button (b q r h) to restart the scroll. rh (Scroll to Destination): Touch this screen button to start a smooth scroll of the route toward the destination, next waypoint or next available POI, depending on the mode selected. Touch this button again to increase the scroll speed. uh (Skip to Destination): Touch this screen button to skip forward to the destination, next waypoint or next available POI, depending on the mode selected. Edit: Touch this screen button to change the way the skip/scroll function operates. You can select to have the skip/scroll go to the start point/destination or to the next available POI or waypoint. 2-53

this button to have the skip/scroll functions skip/scroll to the next destination or waypoint. To next POI: To select this option, a POI category must be selected. Select this button to have the skip/scroll functions skip/scroll to the next available POI for the category. To change the POI category, touch the corresponding screen button next to the category. Touch the Delete screen button to have no POIs appear on the map. The default POIs are the same as those in the Quick POI group listing. Calculate: Touch this screen button to calculate the route with the changes. Once the route has been calculated, this screen will display. From this map screen, touch Guide to begin route guidance or touch Chg. route to return to the ROUTE OPTIONS screen. Cancel Guidance: Touch this screen button to cancel the current route. 2-54

When you start your vehicle you will see Driver 1 or Driver 2 displayed on the driver information center (DIC). The number on the back of the RKE transmitter corresponds to driver 1 or driver 2. The navigation system can store memory points, audio presets, system settings, and last know audio mode for driver 1 and driver 2 individually. See “Vehicle Personalization” in the index of your vehicle’s owner manual for more information. Global Positioning System (GPS) The Navigation System determines the position of your vehicle by using satellite signals, various vehicle signals and map data. At times, other interferences such as the satellite condition, road configuration, the condition of the vehicle and/or other circumstances can interfere with the Navigation’s ability to determine the accurate position of the vehicle. The GPS shows the accurate current position of your vehicle using signals sent by the GPS Satellites of the United States Department of Defense. When your vehicle is not receiving signals from the satellites, a symbol will appear on the map screen. Refer to Symbols on page 2-5. This system may not be available/or interference may occur if the following happens: • Signal obstructions caused by tall buildings, large trucks, tunnels, • objects located on top of the instrument panel, • satellites will not send signals if they are being repaired or improved, • after-market glass tinting has been applied to the vehicle’s windows. Notice: Do not apply after-market glass tinting to the vehicle’s windows. Glass tinting will interfere with the system’s ability to receive GPS signals and cause the system to malfunction. You might have to replace the window to correct the problem. This would not be covered by your warranty. For more information if you are experiencing a problem, see If the System Needs Service on page 2-58 and Problems with Route Guidance on page 2-57. 2-55

inaccurate due to one or more of the following reasons: • The road system has changed. • The vehicle is driving on slippery road surfaces such as in sand, gravel and/or snow. • The vehicle is traveling on winding roads. • The vehicle is on a long straight road. • The vehicle is approaching a tall building or a large vehicle. • The surface streets run parallel to a freeway. • The vehicle has just been transferred by a vehicle carrier or a ferry. • The current position calibration is set incorrectly. • The vehicle is traveling at high speed. • The vehicle changes directions more than once, or when the vehicle is turning on a turn table in a parking lot. • The vehicle is entering and/or exiting a parking lot, garage or a lot with a roof. • The GPS signal is not received. • A roof carrier is installed on your vehicle. • The vehicle is equipped with tire chains. • The tires are replaced. • The tire pressure for your tires is incorrect. • The tires are worn. • The first time the map DVD is inserted. • The battery is disconnected for several days. • The vehicle is driving in heavy traffic where driving is at low speeds, and the vehicle is stopped and started repeatedly. If you experience problems with your system, you may need to calibrate the system. This may be due to tire pressure differences, or if a spare tire is installed. To calibrate the system, see Navigation Set Up on page 2-41. 2-56

Inappropriate route guidance may occur under one or more of the following conditions: • You have not turned onto the road indicated. • Route guidance may not be available when using automatic rerouting for the next right or left turn. • The route may not be changed when using automatic rerouting. • There is no route guidance when turning at an intersection. • Plural names of places may be announced occasionally. • It may take a long time to operate automatic rerouting during high-speed driving. • Automatic rerouting may display a route returning to the set waypoint if you are heading for a destination without passing through a set waypoint. • The route prohibits the entry of a vehicle due to a regulation by time or season or any other regulation which may be given. • Some routes may not be searched. • The route to the destination may not be shown if there are new roads, if roads have recently changed or if certain roads are not listed on the map DVD. See Ordering Map DVDs on page 2-58. To recalibrate the vehicle’s position on the map, see Navigation Set Up on page 2-41. 2-57

If your system needs service and you have followed the steps listed here and still are experiencing problems, see your dealer for assistance. For more information on calibrating the system, see Navigation Set Up on page 2-41. Ordering Map DVDs The map DVD in your vehicle is the most up-to-date information available when your vehicle was purchased. The map DVD is updated once a year, provided that the map information has changed. To order a new map DVD, contact your dealer. Database Coverage Explanations The United States, excluding Alaska and Hawaii, and portions of Canada are contained on one DVD disc. The map database contains three different levels of coverage: detailed areas, non-detailed areas, and limited guidance areas. • Detailed areas are available for the United States and Canada and are primarily located around metropolitan areas. • Limited guidance areas are only available for the United States. The roads are displayed on the map, but route and voice guidance is not available. • Non-detailed areas are available for Canada only. Major roads are included depending upon available coverage. For more detailed information on database coverage, see the Navigation System Map Disc manual included inside the map DVD case. 2-58

CD Player ...................................................3-14 Six-Disc CD Changer ....................................3-19 Radio Personalization with Home and Away Feature .....................................3-23 Section 3 Navigation Audio System 3-1

Notice: Before adding any sound equipment to your vehicle, such as an audio system, CD player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by checking with your dealer. Also, check federal rules covering mobile radio and telephone units. If sound equipment can be added, it is very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’s engine, radio, or other systems, and even damage them. Your vehicle’s systems may interfere with the operation of sound equipment that has been added. Notice: The chime signals related to seat belts, parking brake, and other functions of your vehicle operate through the navigation system. If that equipment is replaced or additional equipment is added to your vehicle, the chimes may not work. Make sure that replacement or additional equipment is compatible with your vehicle before installing it. See “Accessories and Modifications” in the Index of your vehicle’s owner manual. Your vehicle has a feature called Retained Accessory Power (RAP). With RAP, the audio system can be played even after the ignition is turned off. See “Retained Accessory Power (RAP)” in the Index of your vehicle’s owner manual for more information. The audio system is operated using the navigation system menus. Playing the Radio Power/Volume Knob: Press this knob to turn the audio system on and off. Turn the knob to increase or decrease the volume to the audio system. ¦O SEEK ¥: Press and hold the up or down arrow until a beep is heard to go to the next or previous station and stay there. Press and hold either arrow to perform a fast seek. SRCE (Source): Press this hard key to display the main audio screen. 3-2

e / z (Audio/Adjust Screen): Press this key to view the audio and screen settings. Automatic Volume Control (AVC): With AVC, the audio system will adjust automatically to make up for road and wind noise as you drive, by increasing the volume as vehicle speed increases. To use AVC, set the volume to your desired level and then touch the ON screen button. To turn AVC off, select the OFF screen button. If your vehicle has the Bose® audio system, it includes Bose AudioPilot® noise compensation technology. When turned on, AudioPilot® continuously adjusts the audio system to compensate for background noise, so that your audio always sounds the same at the set volume level. This feature is most effective at lower volume settings where background noise can affect how well you hear the music being played through your vehicle’s audio system. At higher volume settings there may be little or no adjustments by AudioPilot®. To use AudioPilot®, set the volume to your desired level and then touch the ON screen button. To turn AVC off, select the OFF screen button. Preset Selection: This feature allows you to program local presets which you can recall by touching HOME. You may also program presets while you are traveling to another area and store them under AWAY. See “Preset Station Menu” later in this section for more information. The Home and Away feature is not available for XM™Satellite Radio Service, if equipped. 3-3

of audio and navigation screens. Touch any of the color options to view the different backgrounds. Color option 1 is the default option. Clock Touch the clock symbol at the bottom of the audio/adjust screen or touch and hold the time display in the upper right corner of any menu to access the CLOCK ADJUST menu. Touching the time display will also display the date on the status bar at the top of the screen. The following time options may be adjusted from this menu: Hour/Min.: Touch the up or down arrows to increase or decrease the hour or minutes. Touch and hold either arrow to advance quickly. 12H/24H: Touch 12H to display the time in standard time, or 24H to display the time in military time. 3-4

the right of this button. Touch GPS TIME to set the navigation system’s time to match current GPS time. Daylight Saving Time: Touch this screen button to increase the time setting by one hour, then touch GPS TIME to save the new setting. If the screen button is light blue, the daylight savings time feature is on. If the screen button is dark blue, the daylight savings time feature is off. TIME ZONE: The selected time zone will appear to the right of this screen button. Touch TIME ZONE to toggle through the available time zones until the desired time zone is highlighted. The time of the selected zone will be displayed to the right of GPS TIME. To set the system clock to the new setting, touch GPS TIME. If the system is not receiving GPS information, you can still set the time manually as described above, but GPS time and Daylight Saving Time features will not be available. Touch the back screen button to go back to the previous menu. Screen Adjust To adjust the contrast or brightness of the screen, touch SCREEN ADJUST at the bottom of the audio/adjust screen. The following screen options may be adjusted from this menu: K (Contrast): Touch the plus (+) or minus (−) to adjust the contrast. You will see the screen change. Touch OK to confirm the change. !(Brightness): Touch the plus (+) or minus (−) to adjust the brightness. Touch OK to confirm the change. AUTO: This setting automatically adjusts the contrast 3-5

conditions. DAY: This setting leaves the screen in day mode. Day mode is best suited for daylight conditions. NIGHT: This setting leaves the screen in night mode. Night mode is best suited for nighttime conditions. SCREEN OFF: Touch SCREEN OFF to turn off the screen. Press the NAV, SRCE, or e/ z (audio adjust) hard key to turn the screen back on. OK: Touch OK to save the changes and exit this menu. SOUND: Touch SOUND to access the SOUND menu. See “Sound Menu” later in this section for more information. Finding a Station Press the SRCE hard key to display the operation screen of the current audio source. Each operation screen has an audio source screen button, (AM, FM1, FM2, XM1, XM2, if equipped, and CD). Touch the desired audio source to select it. 3-6

Up to 30 stations, 6 AM, 6 FM1, 6 FM2, 6 XM1, and 6 XM2, if equipped, can be programmed for home and for away (XM does not have the home and away feature). To store presets, do the following: 1. Turn the audio system on. 2. Press the SRCE hard key. 3. Touch AM, FM1, FM2, XM1, or XM2, if equipped, to display the desired source. The preset station menu will appear. 4. Tune to the desired station by using the TUNE/SEEK arrows. 5. Touch SOUND to set the bass, mid-range, treble, and Auto Tone Control (ATC) for your preset, if desired. See “Sound Menu” later in this section for more information. 6. Touch and hold one of the six numbered preset screen buttons for more than two seconds until you hear a beep. 7. Repeat the steps for each preset and source. SCAN: To scan stations, touch SCAN. The radio will go to a station, play for a few seconds, then go on to the next station. Touch SCAN again to stop scanning. To scan preset stations, touch and hold SCAN for two seconds. It will only scan the audio source it is in, with the exception of FM 1 and FM 2, which will both be scanned if in that source. Touch SCAN again to stop scanning. RDS (Radio Data System): See “Radio Data System (RDS)” later in this section for more information. Info (Information): See “Radio Data System (RDS)” later in this section for more information. AutoSet: Touch this screen button to replace currently stored preset stations with the strongest stations available in the immediate area. Touch it again to return to the original preset stations. SOUND: See “Sound Menu” following in this section for more information. 3-7

or source menu to change the tone, ATC, fade, and balance for all sources. The audio system has a separate setting for these features for each source preset. However, the audio system keeps one fade and one balance setting for all audio sources. To adjust sound settings, do the following: • Touch the plus (+) or minus (−) signs to adjust treble, mid-range, and bass, if you are in the Manual mode of ATC. • Touch the L (left) or R (right) to adjust the balance of the speakers. • Touch the F (front) or R (Rear) to adjust the fade of the speakers. • Touch the ATC screen button to adjust the ATC setting. See “Adjusting the Speakers” later in this section for more information. After adjustments are made, touch the back screen button. This will take you back to the preset station menu. Whenever you touch that screen button, the previously stored information you have entered for each preset station will be recalled. 3-8

ATC (Auto Tone Control): The ATC feature is used to provide a choice of six different listening experiences. ATC can be used while listening to the audio system or the CD player. The audio system can store separate ATC settings for each source and preset station. To save ATC settings for your preset stations, use the SOUND menu and touch ATC. See “Preset Stations” earlier in this section for more information. Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming • Receive announcements concerning local and national emergencies • Display messages from radio stations • Seek to stations with traffic announcements RDS (Radio Data System): Touch RDS to use alternate RDS functions located in the preset menu. When you touch RDS, you will only have about five seconds to choose RDS ON/OFF, TA, INFO, PTY, or Select PTY. If you do not make a selection, the system will return to the previous menu. If you are tuned to a station broadcasting RDS information, the station’s Program Service (PS) and Program Type (PTY) will replace the station’s frequency on the status line at the top of the display. After about five seconds, if available, the PTY will be replaced on the display by the station’s PTY name. The PTY and PTY name may be the same or different. 3-9

broadcasting RDS information, the station’s frequency will remain on the display. The RDS feature relies upon receiving specific information from RDS stations. These features will only work when RDS information is available. TA (Traffic Announcement): Touch TA to receive traffic announcements. The audio system will turn on the TA display. TA will appear on the display if the current station broadcasts traffic announcements. If the current station does not broadcast traffic announcements, the audio system will seek to a station which will. When the audio system finds a station which broadcasts traffic announcements, it will stop. If no station is found, TA will turn off. While a traffic announcement plays, the audio system uses TA volume. To increase TA volume, use the VOL up or down buttons during the announcement. See “Voice Guidance Volume Settings” under Navigation Set Up on page 2-41 for more information. When a traffic announcement comes on the current radio station, you will hear it even if the volume is muted or a CD is playing. If the CD player was being used, the CD will stay in the player and resume play at the point where it stopped. Touch RDS followed by TA again to turn TA off. INFO (Information): When RDS is on, if the current station has a message, INFO will appear on the display. Touch INFO from the preset menu to view the message. If the whole message does not appear on the display, parts of the message will appear every three seconds until the message is completed. Once the complete message has been displayed, INFO will disappear from the display until another new message is received. INFO will remain available to allow you to display the entire message again. PTY (Program Type): PTY allows you to seek only stations with types of programs you want to listen to. This button is used to turn on and off Program Type (PTY) features. With RDS on, touch RDS, followed by PTY. The PTY display will turn on. Touch RDS followed by this button again to turn the PTY display off. Select PTY (Select Program Type): With RDS and PTY on, touch RDS, then Select PTY. The PTY menu will appear. Use the up and down arrows to select a PTY. When the PTY display is on, press TUNE/SEEK or SCAN to find radio stations of the PTY selected. The last PTY selected will be used for seek and scan modes. If a station with the selected PTY is not found, STATION NOT FOUND will appear on the display. If both PTY and TA are on, the audio system will search for stations with traffic announcements and the selected PTY. 3-10

you return to your favorite PTYs. These presets have factory PTY preset stations. See “RDS Program Type (PTY) Selections” later in this section. You can set up to 12 PTYs, 6 FM1 and 6 FM2. To save a PTY preset, do the following: 1. Touch FM1 or FM2. 2. Touch RDS to enter the RDS menu. 3. Touch RDS ON/OFF to turn RDS on. 4. Touch PTY. 5. Touch Select PTY and select the desired PTY from the list. 6. Touch and hold one of the six presets for more than two seconds until you hear a beep. Whenever you touch that numbered preset for less than two seconds, the PTY you set will return. 7. Repeat the steps for each preset. Once you have stored a PTY for each of your preset stations, you can recall a PTY preset by touching the preset station for less than two seconds. Then use TUNE/SEEK or SCAN to locate a station for that PTY selection. ALERT: This type of announcement warns of national or local emergencies. You will not be able to turn off alert announcements. ALERT appears on the display when an alert announcement plays. The audio system uses TA volume during these announcements. To increase volume, use the VOL up and down buttons during the announcement. See “Voice Guidance Volume Settings” under Navigation Set Up on page 2-41 for more information. When an alert announcement comes on the tuned radio station you will hear it even if the volume is muted or a CD is playing. If the CD player is playing, the player will stop for the announcement and resume when the announcement is finished. 3-11