Daikin DCM601A51 Commissioning Manual

DCM601A51 intelligent Touch Manager 11 (4) Dealer Option Enables/Disables dealer options. (5) Time Zone Sets up the difference between the Universal Time Coordinated (UTC) and local time. (6) History Mgmt. (Delete) Deletes history records of a specified period from the history. (7) Other Setting Enables/Disables the “Detect Level” and “Dry Operation Mode”. Detect Level: When enabled, indicates management point error alarms via icons and history. Dry Operation Mode: When enabled, allows you to set Dry mode from the touch panel, the Schedule or Interloc ...

DCM601A51 intelligent Touch Manager 7 2-2 Logging into Service Mode To run engineering, you must log into the Service (SE) Mode from the Menu List screen. In the SE Mode, the Service Settings tab, which is normally hidden, is displayed on the Menu List. Also, special buttons available only in SE Mode are displayed on the tabs. The following describes how to log into the SE Mode. 1. Display the Menu List screen. (1) (3) (2) (4) 2. Touch the four corners of the screen in the indicated order. The Password Input dialog appears. 3. Enter the service password (daik ...

DCM601A51 intelligent Touch Manager 61 3. The registered contact information can be checked on the Contact tab of the Information screen accessible from the Standard View screen. (See User’s Manual (EM11A015)) ...

DCM601A51 intelligent Touch Manager 110 Select Basic software and enter the MAC address, Software ID, and User information of the iTM integrator you want to install. Write down the activation key that appears on the screen. 3. Powering on data backup battery To retain the settings even in the event of a power outage, the iTM integrator has a built-in battery. Because this battery is disabled by default, the first thing you should do is to enable it. Open the front slide cover and turn the screws to remove the front slide cover. Set the BACKUP switch to “ON� ...

DCM601A51 intelligent Touch Manager 89 (9) (10) Select (9) to use the default port 80. Selecting (10) displays the port number 8080. Touching the Modify button allows you to modify the settings in the Numerical Input dialog that appears. Touch the OK button to save and close the screen. 4. When finished, touch the OK button. A confirmation dialog appears. 5. A restart confirmation message is displayed. Touch the Yes button to reflect the setting and restart the iTM. ...

DCM601A51 intelligent Touch Manager 26 • Dio Tab Sets up the Dio. Displayed items vary depending on the management point type. (26) (27) (26) (28) (29) (30) (26) (31) (32) (28) (29) (30) (33) (34) (26) Point Type radio button Select the Di Point Type from A type and B type. (27) Operation Mode radio button Select the Di operation mode from Normal and Equipment error input. (28) Error input masking time after start signal radio button Select an Error Mask Time after operation input from 10 and 30 seconds. Start up error occ ...

DCM601A51 intelligent Touch Manager 110 Select Basic software and enter the MAC address, Software ID, and User information of the iTM integrator you want to install. Write down the activation key that appears on the screen. 3. Powering on data backup battery To retain the settings even in the event of a power outage, the iTM integrator has a built-in battery. Because this battery is disabled by default, the first thing you should do is to enable it. Open the front slide cover and turn the screws to remove the front slide cover. Set the BACKUP switch to “ON� ...