Boss RC-202 Owner's Manual

Saving a Phrase Memory (Write) If you select a different phrase memory or turn off the power after recording or editing the settings, the recorded content or edited settings will be lost. If you want to keep the data, you must save it. MEMO 5 When you save a phrase memory, the bank settings are also saved automatically. 5 You can also save during playback. 1. Press the [WRITE] button. 2. Use the [P. SHIFT] (1)–[DELAY] (8) buttons to select the save-destination phrase memory. 5 This procedure is not required if the phrase memory number is acceptable as is. 5 You ...

5 Deutsch Français Italiano Español Português Nederlands English English Track Settings Here you can specify the playback level and playback method of the tracks. Adjusting the Playback Level 1. Press the [TRACK] button. 2. Turn the [VALUE] knob to adjust the playback level. Specifying the Playback Method 1. Press the button of the function that you want to set. [REVERSE] button Specifies either conventional playback or reverse playback. [UNDO/REDO] button Here’s how to cancel recording/overdubbing for a track. [LOOP/1 SHOT] button Specifies either normal loop playba ...

1. Select the bank for which you want to make settings. 1. Press the [MEMORY] button. 2. Turn the [VALUE] knob. 3. Use the [P. SHIFT] (1)–[DELAY] (8) buttons to select a phrase memory. Alternatively, In the Play screen, turn the [VALUE] knob while pressing it. 4. Press the [SETUP] (EXIT) button. 5. Press a button to select the category of settings that you want to make. LOOP Make looper-related settings such as recording and playback method. FX Make effect settings. RHYTHM Make rhythm-related settings. C ...

15 Deutsch Français Italiano Español Português Nederlands English English 7. Back up the data as described below. Windows users Within Computer (or My Computer), open “BOSS_RC-202” (or Removable Disk). Mac OS users On the desktop, open the “BOSS_RC-202” icon. Backing up to your computer Copy the entire “ROLAND” folder from the BOSS_RC-202 drive to your computer. Recovering backed-up data from your computer to the RC-202 * Performing this operation will erase all phrase memories that are currently saved in the RC-202. Be sure to make a backup b ...

Settings that apply to the entire RC-202, such as auto-off (automatic power-off), USB, and MIDI, are called “system settings.” 1. Press the [SETUP] (EXIT) button. 2. Press a button to select the category of settings that you want to make. MIDI Make settings related to MIDI. GENERAL Make settings such as auto-off. I/O Make settings related to input and output. USB Make settings related to USB. 3. Press the [VALUE] knob to select a parameter, and turn the [VALUE] knob ...

If you use a USB cable to connect the RC-202’s USB port to a USB port on your computer, you’ll be able to do the following things. USB mass storage You can back up RC-202 tracks (WAV files) to your computer or load WAV files from your computer to the RC-202. USB audio/MIDI You can play your computer’s sounds through the RC-202, or record the RC-202’s sounds into your computer. You can also use USB MIDI to synchronize the RC-202’s tempo to a DAW running on your computer. Reference For more about the RC-202’s USB settings, refer to “Parameter ...