Akura APUSB713A Instruction Manual

Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays as Sun” USB/DITIGAL AUDIO/CD/Radio Portable Player I N S T R U C T I O N M A N U A L APUSB713A www.ekey.co.uk (24HR)

WARNING : SHOCK HAZARD-DO NOT OPEN RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION LIGHTNING FLASH WITH ARROWHEAD SYMBOL - within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitude a risk of electric shock to persons. EXCLAMATION POINT - within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reason. The following label has been affixed to the unit, listing the proper procedure for working with the laser beam: CLASS 1 LASER PRODUCT LABEL - This label is attached to the place as illustrated to inform that the apparatus contains a laser component. WARNING LABEL INFORMING OF RADIATION - This label is placed inside the unit. As shown in the illustration. To warn against further measures on the unit. The equipment contains a laser radiating laser rays according to the limit of laser product of class 1. CLASS 1 LASER PRODUCT KLASS 1 LASER APPARAT LUOKEN 1 LAISERLAITE KLASSE 1 LASER PRODUKT Correct disposal of this Product (Waste Electrical & Electronic Equipment (WEEE) The crossed out “Wheelie bin” is intended to show that this appliance must not be placed with ordinary household waste at the end of its useful life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please keep separate from other household waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where you purchased the product, or their local government office for details of where and how you can take this item for environmentally safe re- cycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product must not be mixed with other commercial wastes for disposal

2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 5. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement. 6. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 7. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat. 8. POWER SOURCE - The appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance. 9. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. 10. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 11. ESD WARNING - The display does not function properly or no reaction to operation of any the control may due to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds. 12. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service personnel when: a. The power-supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance has been exposed to rain. d. The appliance has been dropped, or the enclosure damaged. e. The appliance does not appear to operate normally. 13. SERVICING - The user should not attempt to service the appliance beyond that described in the user operating instructions. All other servicing should be referred to qualified service personnel. Notes: a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD. b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power back on. BEFORE OPERATION Notes: CONCERNING COMPACT DISCS. Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items: a. Usable compact discs. Use only compact disc with the mark shown below. b. CD compact disc only with digital audio signals.

to a wall outlet BATTERY POWER Insert 6 x “C” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove the batteries when appliance will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your set. Notes: Use batteries of the same type. Do not mix battery types together. When using batteries, disconnect the Mains supply lead. When not using batteries, remove from the battery compartment to prevent battery leakage damaging the appliance POWER SOURCES E-3 AC POWER Connect to a 230/240V AC 50 Hz supply. Do not attempt to connect to any other source. Insert 6 x “C” size batteries into the battery compartment

E-4 DIAL POINTER SKIP - POWER INDICATOR STOP PROGRAM PLAY / PAUSE / USB CD DOOR FM ANTENNA FUNCTION SELECTOR VOLUME CONTROL OPEN / CLOSE LCD DISPLAY FM STEREO INDICATOR TUNING CONTROL BAND SELECTOR ALBUM MODE SKIP+ USB SLOT

2. Select desired band by using the “BAND” selector. 3. Adjust radio frequency to your desired station by using the “TUNING” control. 4. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND” selector to FM mode for MONO reception. - Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show FM ST. mode. RADIO OPERATION E-5 FOR BETTER RECEPTION - Rotate the antenna for better FM reception. - Rotate the appliance for better AM reception.

E-6 GENERAL OPERATION PLAY / PAUSE / USB Press to start playing CD / DIGITAL AUDIO disc. Press again to stop playing CD / DIGITAL AUDIO operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound. STOP Press to stop all CD / DIGITAL AUDIO operation. PLAYBACK 1. Set the “FUNCTION” selector to “CD / DIGITAL AUDIO” mode. 2. Open the CD door and place a CD / DIGITAL AUDIO disc with the label up in the CD compartment. 3. Close the CD door. 4. Focus search is performed if disc is inside. - Total number of tracks is read and appears on the display. 5. Press the “PLAY / PAUSE / USB” button to start playing CD / DIGITAL AUDIO disc. 6. Adjust the “VOLUME” control to the desired level. 7. Press the “PLAY / PAUSE / USB” button again when you want to stop playback temporarily. 8. Press the “STOP” button when finished.

Each press selects the modes as follows: 1 - REPEAT 1 2 - REPEAT ALBUM ( *DIGITAL AUDIO ONLY ) 3 - REPEAT ALL 4 - RANDOM 5 - NORMAL PLAYBACK REPEAT 1 REP REP ALBUM REP ALL REPEAT ALBUM REPEAT ALL NORMAL PLAYBACK RAND RANDOM CD / DIGITAL AUDIO OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “P01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired album by pressing the “ALBUM” button). 3. Press the “PROGRAM” button again to confirm desired track into the program memory. 4. Repeat step 2 and 3 to enter additional tracks into the program memory. 5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to play the disc in the order you have programmed. 6. Press the “STOP” button twice to terminate programmed playback. E-7

to CD / DIGITAL AUDIO OPERATION. USB OPERATION E-8 GENERAL OPERATION Press to start playing tracks from the USB . Press again to stop playing USB operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound. STOP Press to stop all USB operation. PLAYBACK 1. Plug or slot in USB device to the port. (Make sure no disc on disc tray) 2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode. 3. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB mode. 4. Playback will start automatically from the first track. 5. Press the “STOP” button when finished. 6. Press the “PLAY / PAUSE / USB” button again, playback will start from the first track. PLAY / PAUSE / USB

rates apply). Opening hours Mon-Fir 8 am - 8 pm. Sat 9 am - 4 pm. Sun 11am - 4 pm. “Bank holidays as Should you experience any problems please see guide below before calling the help line FAULT GUIDE E-9 Symptom Possible Cause Remedy Dead No operation No power to player Check the power plug is in firmly and connected to a power supply. If batteries are fitted ensure they are new and fitted the correct way round No radio operations but Led lit Function switch set to CD Switch to Radio or place a disc into the player No or noisy radio stations on MW Poor signal Rotate the case of the radio as the internal aerial is directional. The externding rod is not used on AM No or noisy stations on FM Poor signal Extend and rotate the rod aerial Dirty or damaged discs. Carefully clean the disc and place in the player label side up. Not playing discs Dirty Laser lens Carefully clean the laser lens with a cotton bud Disc inside CD compartment. Remove disc Not playing USB USB player not compatible. Some USB players are not compatible. Most USB memory sticks are compatible Sun” or alternatively www.ekey.co.uk (24 Hr)

DO NOT CONNECT THE CENTRE PIN (EARTH). Connect the Blue wire to the (N) terminal ( this may be coloured blue). Connect the Brown wire to the (L) terminal adjacent to the fuse ( this may be coloured brown). This appliance must have a 3A fuse fitted. E-10 ON HANDLING DISCS ON CLEANING DISCS Do not touch the playback side of the disc. Do not attach paper or tape to disc. Fingerprints and dust on the disc cause sound distortion and skipping of tracks. Wipe the disc from the centre outwards with a soft cloth. If you can not wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. Do not use any type of solvent such as thinne Disc operation : CD and Ditigal Audio (MP3). 7 cm 12 cm discs. USB input. r, benzine, commercially available cleaners or anti- static spray for vinyl Lps. It may damage the disc. SPECIFICATIONS Power Supply : 230V ~ 50Hz Power Consumption : 12 Watt Output Power(RMS) : 2 x 1W Terminal impedence : Speaker 4ohms Unit Dimensions : 236(L) x 227(W) x 118(H)mm Net Weight : 1.5kg Gross Weight : 1.7kg Tuning Frequency : AM: 540-1600 KHz FM: 88-108 MHz DC Operation : 9V (6 X UM-2)