Makita LS1040 Instruction Manual

surface level of the turn base. Do not rely solely on the vertical vise and/ or horizontal vise to secure the workpiece. Thin material tends to sag. Support workpiece over its entire length to avoid blade pinch and possible KICKBACK. Sub-fence This tool is equipped with the sub-fence. It should be positioned as shown in the figure. CAUTION: • When performing left bevel cuts, flip the fence over to the left position as shown in the figure. Otherwise, it will contact the blade or a part of the tool, causing ...

For public low-voltage distribution systems of between 220 V and 250 V. Switching operations of electric apparatus cause voltage fluctuations. The operation of this device under unfavora- ble mains conditions can have adverse effects to the operation of other equipment. With a mains impedance equal or less than 0.30 Ohms it can be presumed that there will be no negative effects. The mains socket used for this device must be protected with a fuse or protective circuit breaker having slow tripping characteristics. For European countries only Noise and Vibration The typical A-w ...

surface level of the turn base. Do not rely solely on the vertical vise and/ or horizontal vise to secure the workpiece. Thin material tends to sag. Support workpiece over its entire length to avoid blade pinch and possible KICKBACK. Sub-fence This tool is equipped with the sub-fence. It should be positioned as shown in the figure. CAUTION: • When performing left bevel cuts, flip the fence over to the left position as shown in the figure. Otherwise, it will contact the blade or a part of the tool, causing ...

adjusting or checking function on the tool. Blade guard When lowering the handle, the blade guard rises automatically. The guard is spring loaded so it returns to its original position when the cut is completed and the handle is raised. NEVER DEFEAT OR REMOVE THE BLADE GUARD OR THE SPRING WHICH ATTACHES TO THE GUARD. In the interest of your personal safety, always maintain the blade guard in good condition. Any irregular operation of the blade guard should be corrected immediately. Check to ...