Lindy 25051 Operation & User’s Manual

Enlarge Your Network You can use Uplink port of the 8-Port Switch to connect with another hub or switch to interconnect each of your small switched workgroup to form a large switched network. You can connect anyone switch port to hub or switch without crossover cable by the Auto MDI/MDI-X function. In the below illustration, two Switches are used to interconnect two small workgroup. All the devices in this network can communicate with each other. Connecting servers to the Switch allow other users to access the server’s data. ...

8-Port Switch : Specification Standards Compliance IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE standard 802.3 N-Way auto-negotiation Protocol CSMA/CD Max Forwarding Rate and Max Filtering Rate 14,880 pps Ethernet port, 148,800 pps per Fast Ethernet port LED Indicators Per Port: Link/Activity, Full/Collision, 100M Per Unit: Power Network Cables 10Base-T: 2-pair UTP Cat. 3, 4, 5 cable (100m), EIA/TIA-568 100-ohm STP (100m) 100Base-TX: 2-pair UTP Cat. 5 cable (100m), EIA/T ...

and their meaning. Rear Panel The Rear Panel of the 8-Port Switch consists of 8x 10/100 N-Way UTP switch ports, and one DC power connector. Figure 2-4. The Rear Panel of the 8-Port Switch ��RJ-45 Ports: 8x 10/100N-Way auto-sensing for 10Base-T or 100Base-TX connection. LED Status Color Description Power On Green The power of the Switch is On On Green The port is connecting with 100Mbps. 100Mbps Off The connection between the Switch and the device is 10Mbps, if the LINK/ ACT light is on. On Green The port is successfully connec ...

This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to pro reasonable protection against harmful interference in a residential installation. This equipments generates, uses and can radiate radio frequency energy and, if not stalled and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipme ...