XVision XIR621 Instruction Manual

through a 75 Ohms type coaxial cable. 2. Connect the power source, insert the AC plug into the AC socket and the DC plug into the DC Jack (+12V DC in jack centre) (as shown in Figure 3). 3. Once the picture appears on the monitor, open the cover and make the Zoom Adjustment by rotating the screw (NEAR-Anti-clockwise, FAR-Clockwise) until you get the desired view. Next make the Focal Adjustment by rotating the screw (TELE-Anti-clockwise,WIDE- Clockwise) until you get the desired view (as shown in Figure 4). 4. Tighten the two sc ...

through a 75 Ohms type coaxial cable. 2. Connect the power source, insert the AC plug into the AC socket and the DC plug into the DC Jack (+12V DC in jack centre) (as shown in Figure 3). 3. Once the picture appears on the monitor, open the cover and make the Zoom Adjustment by rotating the screw (NEAR-Anti-clockwise, FAR-Clockwise) until you get the desired view. Next make the Focal Adjustment by rotating the screw (TELE-Anti-clockwise,WIDE- Clockwise) until you get the desired view (as shown in Figure 4). 4. Tighten the two sc ...

LINELOCK = Adjust the vertical phase(VPH) from 000 - 359 (factory default is 0). Line line is only available with 24VAC power. RETURN = Press MENU to return to the SETUP menu. 5 MOTION DET Detect moving objects on screen; displays MOTION DETECTED along with the number of movements counted. Select the area on screen you want to observe. AREA SEL= Select a motion detection grid (top left, top right, bottom left, bottom right) to modify. AREA STATE= Activate or deactivate the selected grid. TOP/DOWN/LEFT/RIGHT= Press LEFT or RIGHT menu ...

1 LENS Select lens type 2 SHUTTER Adjusts shutter settings. Flickerless mode(FLK) reduces on-screen flickering. Electronic Shutter Control(AUTO) adjusts brightness level on screen. Manual mode allows you to adjust the shutter speed from 1/60~1/120,000 of a second(NTSC), or 1/50~1/100,000 (PAL). FLK is the only option available when the camera lens is set to the recommended DC mode. 3 COLOUR AUTO= Automatically detect colour or black/white. ON= Full time colour mode 4 SYNC INT ...

through a 75 Ohms type coaxial cable. 2. Connect the power source, insert the AC plug into the AC socket and the DC plug into the DC Jack (+12V DC in jack centre) (as shown in Figure 3). 3. Once the picture appears on the monitor, open the cover and make the Zoom Adjustment by rotating the screw (NEAR-Anti-clockwise, FAR-Clockwise) until you get the desired view. Next make the Focal Adjustment by rotating the screw (TELE-Anti-clockwise,WIDE- Clockwise) until you get the desired view (as shown in Figure 4). 4. Tighten the two sc ...