Speco VIP2B3 Quick Installation Manual
Text of the manual
Quick Installation Guide
VIP2B3
Full-HD
IP IR Mini Bullet
Please read this manual thoroughly before use, and keep it handy for future reference.
The Network Camera supports the network service for a sensor image with progressive scan, which
can be monitored on a real-time screen regardless of distances and locations. By using its dedicated
program, many users are able to have an access to the Network Camera at once or a single user can
monitor various network cameras at the same time.
• Connection Cable
NO
Wire Color
Description
1
Black
Service Monitor Port, Stereo Jack
2
Black
Ethernet, RJ-45 port compatible with 10/100Mbps having PoE
functionality. Modular Jack
3
Red: AC24V/DC12V
White: AC24V/GND
Main Power, 2pin terminal, AC24V 370mA(5.8W) / DC12V 420mA(5.1W)
4
Pink: Alarm In
Yellow: GND
Light Blue: Alarm Out
Gray: GND
Alarm Input,
Base Installation(Cable through the wall or ceiling with the mount base)
A. Remove the waterproof cap(①).
B. Remove the back cover(②).
C. Make the camera settings.
D. Combine the back cover and waterproof cap(②→①).
Note: If you do not remove or combine in the order, the camera will be damaged.
E. Secure the camera to the wall or ceiling by the
• Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for connection
to a hub.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
•
Connect
