Miditech i2-Stage 88 Manual 

USB Stage Piano & MIDI Controller Keyboard Features: Over 192 built in sounds, incl. 64 EMU Piano and Vintage keyboard sounds General MIDI compatible soundbank with 128 Sounds 88 light weighted velocity sensitive keys 128-voice polyphony, 16-part multitimbral 8 free programmable v-pots and 8 sliders Pitch-Bend/Modulation wheels 2 Splitzones Transpose/Preset buttons 12 user programmable templates USB MIDI I/O, Keyboard MIDI OUT, PC MIDI OUT Sustain pedal connector, LINE/Headphone OUT USB powered or with an optional USB DC power adaptor Class compliant for Windows XP/Vista/7/8/10 and Mac OSX Incl. Miditech free software bundle eMail: [email protected] Internet: www.miditech.de 1

masterkeyboard controller. It is designed for both the studio and the concert. The i2-Stage 88 offers 88 velocity-sensitive keys and 2 soundbanks with 64 amazing EMU vintage keyboard sounds, and a General MIDI compatible soundbank. The i2-Stage 88 provides extensive controllers for virtual instruments, DAWs, hardware synthesizers, samplers and any other MIDI compatible device. The eight fully assignable knobs and sliders allow for instant control of your software’s features and can pick up just where you left off. The versatile and easy-to-use i2-Stage 88 is a great controller in the studio and of course for live concert and performance. It also comes with a big software bundle, the MIDITECH free software bundle. For this please visit our homepage www.miditech.de ! i2-Stage 88 -Overview Front view 1 2 3 4 5 6 7 8 9 10 11 12 Back side connections 12 13 14 15 16 2

2. Modulation wheel 3. Data Entry Slider 4. LCD Display 5. MIDI/SELECT & Power button 6. Keyboard 7. Programmable slider 8. Direct access keys for EMU sounds 9. Direct-access function keys 10. Transpose & Preset buttons (Up & Down) 11. Programmable v-pots 12. Number keys, CANCEL & ENTER keys 13. AUX LINE & headphone out 14. Sustain pedal connector 15. Keyboard MIDI OUT 16. PC MIDI OUT 17. USB connector 3

Pitch Bend wheel (1) The Pitch Bend wheel is used for raising or lowering the pitch of a voice during performance. The range of pitch values depends on the sound generator (sound card or module) being used. Please refer to the manuals of your devices for information on how to change the Pitch Bend range. To bend the pitch up, please move the wheel away from you. To bend the pitch down, please move the wheel towards you. Modulation wheel (2) It is very common to use the modulation wheel to change the intensity of effects: mainly Vibrato (pitch change), Tremolo (Change the volume), and Modulation (change the tone). The Modulation wheel produces a vibrato effect shortly after the sound is generated. It is most effective for voice such as Saxophone Strings and Oboe. Data Entry Silder, Display and MIDI/Select & Power-button (3,4,5) The Data Entry slider allows you to adjust the parameters of a MIDI controller. Use this knob to select different MIDI commands on certain keys from your keyboard. Basic function is the master volume. The MIDI/Select button switches between the Play and the Edit Modes of the i2-Stage 88. The MIDI/Select button also is a Power button, you can switch on and off the i2-Stage 88 by pressing the button longer than 5 seconds. If ths keyboard is in Auto-power-off mode, you can wake it up by pressing this button 5 seconds. Programmable sliders und v-pots (7,10) This 8 faders and v-pots are freely programmable with MIDI CC controllers – you will find a list of the i2-Stage 88 controller possibilities later in this manual. EMU direct access keys (8) In the Edit mode (press MIDI/Select) , you can use this keys to get a direct access to the sounds of the EMU soundbank. Choose directly the sound numbers or use the + and – keys to step through all 4

the General MIDI soundbank of the i2-Stage 88. After choosing a sound, the keyboard will switch automatically to this sound after 2 seconds and turn back to the Play mode. Function-keys and the Ten-number keys with CANCEL & ENTER (9,12) In the Edit Mode (with active MIDI/Select button), you can use some special features for have a direct access to this functions. You find this keys below the silk print. PANIC (stops all MIDI messages if the i2-Stage 88 hangs) Press MIDI/Select and the key below „PANIC“ – this forces a reset and all MIDI data will be stopped at once. SNAPSHOT (send the actual data via MIDI ) Press MIDI/Select and the key below „SNAPSHOT“ - the keyboard will send all actual MIDI and controller data via MIDI. MIDI OUT (switches the MIDI OUT on and off) Press MIDI/Select and the key below „MIDI OUT“ - the keyboard will switch the MIDI OUT port on and off STORE (stores the actual settings into a USER PRESET) Press MIDI/Select and the key below „STORE“ - the keyboard will save all actual MIDI and controller settings into a user preset. The display shows „Sto“ und „t0x“ - 0x for the number of the preset place number. You can choose the preset number by using the „TRANSPOSE/PRESET“ Up&Down buttons. SPLIT (switches the Split Zone function on and off ) Press MIDI/Select and the key below „SPLIT“ - the keyboard changes between SLIT on and off. KEYB CHAN (sets the MIDI channel for ALL, LOWER and UPPER zones) Press MIDI/Select and the key below „KEYB CHAN“ 3 times slowly – the display switches between Cxx for the basic MIDI channel – Lxx for the „Lower MIDI channel“ and Hxx for the „Higher MIDI channel“. You can change the active MIDI channel for each zone by input an new number with the number keys and ENTER. For example: To change the basic MIDI channel for the whole keyboard to channel 5, press 5

channel is set to MIDI channel 5. You can do this also for the 2 LOWER and HIGHER zones. BANK MSB (choose the soundbank), BANK LSB Press MIDI/Select and the key below „BANK MSB“ - the keyboard will show the active soundbank number for the 3 zones, ALL; LOWER and HIGHER. The EMU number is 001, the GM bank uses the bank number 000. For example: To change the sounbank for the whole keyboard, press „MIDI/Select“, „BANK MSB“ one time, then input „000 ENTER“ for the GM bank or „001 ENTER“ for the EMU bank. You can do the same for the LOWER and the HIGHER zones, by pressing „BANK MSB“ 2 times (for LOWER) or 3 times (for HIGHER). PROG (Choose directly a sound program with its program number) Press MIDI/Select and the key below „PROG“ - the keyboard will show the active keyboard zone with P-A for ALL, P-L for LOWER and P-H for the HIGHER zone. After one second the displays shows the actual sound number for each zone. You can change the sound number by writing a new number with the TEN-keys and ENTER. By pressing the MIDI/Select once more the new sound program will get active in the chosen zone. CURVE (Choose a velocity curve) You can choose between different velocity curves, which decides how the keyboard dynamic works. You can see in the graphics below how the curves work. For example, to de-activate the velocity, choose curve 8. You will get allways the maximum dynamic. Press MIDI/Select and the key below „CURVE“ - the keyboard will show the active curve number for the keyboard. You can change the velocity curve number by writing a new number with the TEN-keys and ENTER. By pressing the MIDI/Select once more the new curve will get active. You can only use the numbers 001-008. 6

CTRL ASSIGN (Assign which MIDI CC Controller are used by the faders and v-pots) Press MIDI/Select and the key below „CTRL ASSIGN“ - after this use the hardware controller you want to assign – the i2-Stage 88 will recognise the used controller automatically. The display shows the used hardware controller number and after 1 second the actual MIDI CC Controller which is working working with hardware fader or v-pot. You can change the CC controller number by writing a new number with the TEN-keys and ENTER. By pressing the MIDI/Select once more the new MIDI CC controller will be activated. Please remember, the i2-Stage 88 uses his own MIDI CC controller numbers. You will find the complete CC numbers in the table at the end of this manual! 7 1 2 3 4 5 6 7 8

Press the TRANSPOSE UP and DOWN buttons to higher or lower the keyboard in semitones. Maximum is 12 semitones up or down. If you are in EDIT MODE, with activated MIDI/Select button, you can use this 2 buttons to change the active user preset number. The display will show the active preset number as P-xx. You can use up to 12 user presets. Synthesizer and Stage Piano Functions The Soundbanks The i2-Stage 88 offers you 2 different soundbanks. The first bank comes with 64 high-class EMU sounds with different Pianos, E-Pianos, Vintage Synthesizer and Keyboard sounds, such as for example DX, Wurlitzer, B3 etc. (This is Bank Nummer 001). The second soundbank is a General MIDI compatible soundbank, with 16 times multimode and GM Drums on MIDI channel 10. (Bank number is 000) You can listen to the sounds at the back side of the i2-Stage 88 at the AUX out. Please connect the stereo AUX OUT to a headphone or to an amplifier. The sliders and the v-pots are ready configured to use them with the EMU sound-engine, but you can of course re-configure them as you want to use it! How to do this, you will find in the next chapter. How to use the sounds Direct Acess to the 64 EMU sounds: Press MIDI/Select and use the number keys in the middle of the i2-Stage 88 to choose directly an EMU sound-number. Starting at C3, you can choose some sound numbers directly, or use the keys H5 and C6 to step through the EMU sounds one by one. The range is from 01 to 64. After choosing the number and waiting one second, the sound will be directly activated and MIDI/Select switch off automatically. The display shows E and the active EMU sound number. To switch between the EMU and the GM soundbank, you must use an MSB order. 8

Press MIDI/Select and the keyb below „BANK MSB“ one, two or 3 times. 1: - A for ALL -the soundbank of the complete keyboard will be chosen. 2: - L for LOWER -the soundbank of the lower keyboard zone will be chosen. 3: - H for HIGHER -the soundbank of the higher keyboard zone will be chosen. After every step you can change the bank number by writing a new number with the TEN-keys and ENTER. In this bank select mode you can only choose between 001 and 000. By pressing the MIDI/Select once more the new bank will be activated for the chosen zone. For example: „001 and ENTER“for the first bank, the EMU bank – you can use sound numbers from E1-E64. „000 and ENTER“for the second bank, the General MIDI bank – you can use sound numbers from 001-127. How to program a single sound to the complete keyboard: Press MIDI/Select and the key below „PROG“ up to 3 times. The display shows: 1: P-A - the sound of the complete keyboard will be chosen. 2: P-L -the sound of the lower keyboard zone will be chosen. 3: P-H -the sound of the higher keyboard zone will be chosen. After every step the active sound number will be displayed. Now you can change the sound number by writing a new number with the TEN-keys and ENTER. In this sound select mode you can only choose between 001-064 in the EMU bank, and 001-127 in the GM bank. By pressing the MIDI/Select once more the new sound will be activated for the chosen zone. Note: you can choose the EMU sounds faster with the EMU direct access keys. How to setup 2 different sounds into 2 different zones: You can combine 2 different sounds from the 2 soundbanks and play them simultanious. For example a bass sound from the EMU bank (001) in the left zone and a Piano in the right zone from 9

Please choose first the soundbank for the 2 zones: Please check, which bank is active for the LOWER and the HIGHER zone. Press MIDI/Select and the key below „BANK MSB“ - the keyboard will show the active soundbank number for the 3 zones, ALL; LOWER and HIGHER. The EMU number is 001, the GM bank uses the bank number 000. After every step you can change the bank number by writing a new number with the TEN-keys and ENTER. In this bank select mode you can only choose between 001 and 000. By pressing the MIDI/Select once more the new bank will be activated for the chosen zone. For example: LOWER zone: „001 and ENTER“for the first bank, the EMU bank – you can use sound numbers from E1-E64. HIGHER zone: „000 and ENTER“for the second bank, the General MIDI bank – you can use sound numbers from 001-127. Now you can setup the 2 different sounds for the LOWER and HIGHER zone. Press MIDI/Select and the key below „PROG“ 3 times - the keyboard will show the active sound number for the 3 zones, ALL; LOWER and HIGHER. After every step you can change the sound number by writing a new number with the TEN-keys and ENTER. In this PROG select mode you can only choose between 001-064 in the EMU bank (now in the LOWER) and 001-127 in the GM bank (now in HIGHER) . By pressing the MIDI/Select once more the new sounds will be activated for the chosen zones . To cativate the SPLIT zones, press MIDI/Select again and the key below „SPLIT“. The display shows ON and OFF. 10

Press MIDI/Select and the key below „KEYB CHAN“ up to 3 times - the keyboard will show the active MIDI channel number for the 3 zones,C for ALL; L for LOWER and H for HIGHER. After every step you can change the MIDI channel number by writing a new number with the TEN- keys and ENTER. In this „KEYB CHAN“ mode you can only choose between the 16 MIDI channels 001-016. How to store your settings into a user setup: The i2-Stage 88 can store up to 12 different user setups and save your own settings.. You can store each active setting for the keyboard, MIDI channels, CC controllers etc. How to use a preset: By switching the i2-Stage 88 on, the last setup will be active. Press MIDI/Select and use this TRANSPOSE/PRESET UP and DOWN buttons to change the active user preset number. The display will show the active preset number as P-01 to P-12. You can use up to 12 user presets. How to store a preset: After you have done some settings, press „MIDI/Select“ and choose with the TRANSPOSE/PRESET UP & DOWN buttons the preset number you want to use. Then press the key below „STORE“ - your setup will be stored. The display shoiws „t0x“ and shows the user preset number, which is actually used. 11

The installation of the i2-Stage 88 at PC or Mac The i2-Stage 88 is class compliant and will be automatically driverless installed at Windows XP SP2, Windows Vista, Windows 7/8/10 and MAC OSX. The only thing you must do, is to connect it with the USB cable. Setup the i2-Stage 88 in your music software Each MIDI compatible software has a MIDI setup. You can setup there the i2-Stage 88 as the MIDI INPUT and OUTPUT device. MIDI connection To use the i2-Stage 88 with a normal MIDI hardware expander or any other MIDI compatible device, please connect it with a normal DIN MIDI cable. Connect the keyboard MIDI OUT with the MIDI INPUT of the destination device. Power To use the i2-Stage 88 stand alone, please connect a normal USB DC power adaptor. If you connect the i2-Stage 88 with the USB cable to a PC, the keyboard will be USB powered by the computer. After 10 minutes the i2-Stage 88 has an AUTO-POWER-OFF fuinction. Please press the MIDI/Select/POWER button longer than 5 seconds to re-activate the keyboard. Minimum system requirements Windows Mac OS Pentium 3 800MHz oder höher Macintosh G3*800/G4*733 MHz oder höher 256 MB RAM OS X 10.3.9 with 256 MB RAM Direct X 9.0b oder höher OS X 10.4.2 oder höher mit 512 MB RAM Windows XP(SP2) oder höher *G3/G4 Accelerator Cards werden nicht unterstützt. (Windows 98,Me,NT or 2000 nicht unterstützt) 12

The i2-Stage 88 as a MIDI controller In your studio or at home you can ise the i2-Stage 88 together with your DAW software. All faders and v-pots can be free configured to use them with your software DAW. How to setup the hardware-controllers into a user template You can save up to 12 different user setups into your i2-Stage 88. So you can setup the keyboards controller elements for use in different situations and with different software programs. You can setup each active faders and v-pots with different MIDI channels and split zones. To change the setups, you must use the MIDI/Select button in combination with the TRANSPOSE/PRESET UP & DOWN buttons. How to use a preset: By switching the i2-Stage 88 on, the last setup will be active. Press MIDI/Select and use this TRANSPOSE/PRESET UP and DOWN buttons to change the active user preset number. The display will show the active preset number as P-01 to P-12. You can use up to 12 user presets. How to store a preset: After you have done some settings, press „MIDI/Select“ and choose with the TRANSPOSE/PRESET UP & DOWN buttons the preset number you want to use. Then press the key below „STORE“ - your setup will be stored. The display shoiws „t0x“ and shows the user preset number, which is actually used. MIDI/Select and the function-keys You can get fast access to different functions with the combination of the MIDI/Select button and some keyboard keys, which are containing with dedicated functions. The silk print of the keyboard shows you the functions, use them with the keys below them. 13

SNAPSHOT (sends all active MIDI settings into your DAW) MIDI OUT (switches the MIDI OUT on and off) STORE (stores the active settings into a user preset) SPLIT (switsches the SPLIT on and off) KEYB CHAN (sets the MIDI channels for the 3 zones ALL, LOWER and HIGHER) BANK MSB and BANK LSB (choose an internal or external soundbank), PROG (choose a sound program number) CURVE (change the keyboards velocity curve) CTRL ASSIGN (assign a hardware fader or v-pot with a CC MIDI controller) CHAN ASSIGN (assign a hardware fader or v-pot with a MIDI channel) Keys below 1-9, CANCEL and ENTER (the TEN keys for the number input) How to setup a single controller How to setup a CC controller to the 16 faders or v-pots Press MIDI/Select and the key below „CTRL ASSIGN“ - after this use the hardware controller you want to assign – the i2-Stage 88 will recognise the used controller automatically. The display shows the used hardware controller number and show after 1 second the actual MIDI CC Controller which is working working with hardware fader or v-pot. You can change the CC controller number by writing a new number with the TEN-keys and ENTER. By pressing the MIDI/Select once more the new MIDI CC controller will be activated. Please remember, the i2-Stage 88 uses his own MIDI CC controller numbers. You will find the complete CC numbers of the i2-Stage 88 in the table at the next side of this manual! 14

Please remember, the i2-Stage 88 uses his own MIDI CC controller numbers. You will find the complete CC numbers here: number function value display 0 Controller Off / "Controller Off" 1 0~127 "Bank MSB" 2 Modulation Wheel or Lever 0~127 "Mod.MSB" 3 Breath Controller 0~127 "Breath MSB" 4 Controller Change #3 0~127 "CC#3" 5 Foot Controller 0~127 "Foot MSB" 6 Portamento Time 0~127 "Port.TimeM" 7 Data Entry MSB 0~127 "DataMSB" 8 Channel Volume(formerly Main Volume) 0~127 "Volume MSB" 9 Balance 0~127 "Balance MSB" 10 Undefined 0~127 "CC#9" 11 Pan 0~127 "Pan MSB" 12 Expression Controller 0~127 "Exp.MSB", 13 Effect Control 1 0~127 "Eff.1 MSB" 14 Effect Control 2 0~127 "Eff.2 MSB" 15 Controller Change #14 N/A 0~127 "CC#14" 16 Controller Change #15 N/A 0~127 "CC#15" 17 General Purpose Controller 1 0~127 "GPC.1" 18 General Purpose Controller 2 0~127 "GPC.2" 19 General Purpose Controller 3 0~127 "GPC.3" 15

(Bank Select) 0~127 "Bank LSB" 34 LSB for Control 1 (Modulation Wheel or Lever) 0~127 "Mod.LSB" 35 LSB for Control 2 (Breath Controller) 0~127 "Breath LSB" 36 LSB for Control 3 (Undefined) 0~127 "CC#35" 37 LSB for Control 4 (Foot Controller) 0~127 "Foot LSB" 38 LSB for Control 5 (Portamento Time) 0~127 "Port.TimeL" 39 LSB for Control 6 (Data Entry) 0~127 "Data LSB" 40 LSB for Control 7 (Channel Volume, formerly Main Volume) 0~127 "Volume LSB" 41 LSB for Control 8 (Balance) 0~127 "Balance LSB" 42 LSB for Control 9 (Undefined) 0~127 "CC#41" 43 LSB for Control 10 (Pan) 0~127 "Pan LSB" 44 LSB for Control 11 (Expression Controller) 0~127 "Exp.LSB" 45 LSB for Control 12 (Effect control 1) 0~127 "Eff.1 LSB" 16

(Effect control 2) 0~127 "Eff.2 LSB" 47 LSB for Control 14 (Undefined) 0~127 "CC#46" 48 LSB for Control 15 (Undefined) 0~127 "CC#47" 49 LSB for Control 16 (General Purpose Controller 1) 0~127 "GPC.1" 50 LSB for Control 17 (General Purpose Controller 2) 0~127 "GPC.2" 51 LSB for Control 18 (General Purpose Controller 3) 0~127 "GPC.3" 52 LSB for Control 19 (General Purpose Controller 4) 0~127 "GPC.4" 53~64 Controller Change #52~#63 0~127 "CC#52"~"CC#6 3" 65 Damper Pedal on/off (Sustain) 0~127 "Sus.Pedal" 66 Portamento On/Off 0~127 "Portamento" 67 Sostenuto On/Off 0~127 "Sostenuto" 68 Soft Pedal On/Off 0~127 "Soft Pedal" 69 Legato Footswitch 0~127 "Leg.Pedal" 70 Hold 2 0~127 "Hold2" 71 Sound Controller 1 (default Sound Variation) 0~127 "S.Var." 72 Sound Controller 2 (default Timbre/ Harmonic Intens.) ) 0~127 "S.Timbre" 73 Sound Controller 3 (default Release Time) 0~127 "S.Rel.Time" 74 Sound Controller 4 (default Attack Time) 0~127 "S.Att.Time" 17

(default Brightness) 0~127 "S.Bri." 76 Sound Controller 6 (default Decay Time - see MMA RP-021) 0~127 "Decay Time" 77 Sound Controller 7 (default Vibrato Rate - see MMA RP-021) 0~127 "Vib.Rate" 78 Sound Controller 8 (default Vibrato Depth - see MMA RP-021) 0~127 "Vib.Depth" 79 Sound Controller 9 (default Vibrato Delay - see MMA RP-021) 0~127 "Vib.Delay" 80 Sound Controller 10 (default undefined - see MMA RP-021) 0~127 "S.Cont.10" 81 General Purpose Controller 5 0~127 "GPC.5" 82 General Purpose Controller 6 0~127 "GPC.6" 83 General Purpose Controller 7 0~127 "GPC.7" 84 General Purpose Controller 8 通用控 制器 0~127 "GPC.8" 85 Portamento Control 0~127 "Port.Ctrl" 86 Controller Change #85 0~127 "CC#85" 87 Controller Change #86 0~127 "CC#86" 88 Controller Change #87 0~127 "CC#87" 89 High Resolution Velocity Prefix 0~127 "HRVP" 90 Controller Change #89 0~127 "CC#89" 18

(default Reverb Send Level - see MMA RP- 023) (formerly External Effects Depth) 0~127 "Rev.Level" 93 Effects 2 Depth (formerly Tremolo Depth) 0~127 "Tre.Depth" 94 Effects 3 Depth (default Chorus Send Level - see MMA RP- 023) (formerly Chorus Depth) 0~127 "Cho.Level" 95 Effects 4 Depth (formerly Celeste [Detune] Depth) 0~127 "Cel.Depth" 96 Effects 5 Depth (formerly Phaser Depth) 0~127 "Pha.Depth" 97 Data Increment (Data Entry +1) (see MMA RP-018) 0~127 "Data +1" 98 Data Decrement (Data Entry -1) (see MMA RP-018) 0~127 "Data -1" 99 Non-Registered Parameter Number (NRPN) - LSB 0~127 "NRPN MSB" 100 Non-Registered Parameter Number (NRPN) - MSB 0~127 "NRPN LSB" 101 Registered Parameter Number (RPN) - LSB 注 0~127 "RPN MSB" 102 Registered Parameter Number (RPN) - MSB 0~127 "RPN LSB" 19

Sound Off 0~12 7 "All Sound Off" 122 [Channel Mode Message] Reset All Controllers (See MMA RP-015) 0~12 7 "All Ctrl Off" 123 [Channel Mode Message] Local Control On/Off 0~12 7 "Local KeyB." 124 [Channel Mode Message] All Notes Off 0~12 7 "All Notes Off" 125 [Channel Mode Message] Omni Mode Off (+ all notes off) 0~12 7 "Omni Mode Off" 126 [Channel Mode Message] Omni Mode On (+ all notes off) 0~12 7 "Omni Mode On" 127 [Channel Mode Message] Mono Mode On (+ poly off, + all notes off) 0~12 7 "Mono Mode On" 128 [Channel Mode Message] Poly Mode On (+ mono off, +all notes off) 0~12 7 "Poly Mode On" 129 Program 0~12 7 "Program" 130 Channel ressure 0~12 7 "Aftertouch" 20

25 Piano Strings 47 Fat Mini 4 Clavinet 1 26 Wurlitzer EP 48 Multi Bass 5 Prophet 10 27 B3 3rd Perc 49 CP-70 & Rhodes 6 String Section 28 Pulse Piano 50 Dyno Piano & OBX 7 Mini Moog 29 OB-Xa 51 B3 Jazz & DX 8 Synthestring 30 Solina Strings 52 All Saws 9 Brite Piano 31 SEM Moog 53 MegaSynth 10 DX Rhodes 32 TB 303/Rhodes 54 OB & Saws 11 B3 Full 33 CP-70 & String & Dyno 55 Prophet PWM 12 Clavinet 2 34 Dyno & Strings 56 Pulse Keys 13 Matrix Synth 35 B3-888 2nd & Rhodes 57 Wurly & CP 14 Sax Section 36 Clavinet 1 & 2 58 Wurly & Solina 15 Moog Rogue 37 Matrix & Solina 59 B3 888 3rd & All Drawbars Out 16 Slap/Horns 38 Solina & OBX 60 TB303 & Clavinet 17 Honky Tonk 39 Moog Bass 61 SEM 18 Dyno Rhodes 40 Saw Bass 62 OB, Juno & B3 19 B3 Jazz 41 CP-70 & Strings 63 SEM, Moog & OBX 20 CP-70 42 DX & Rhodes 64 All Saws & Squares 21 Juno 60 43 B3-All Drawbars Out 22 Brass Section 44 Clavinet & Pulse 21

1 Acoustic Grand Piano 34 Electric Bass (finger) 2 Bright Acoustic Piano 35 Electric Bass (pick) 3 Electric Grand Piano 36 Fretless Bass 4 Honky-tonk Piano 37 Slap Bass 1 5 Electric Piano 1 38 Slap Bass 2 6 Electric Piano 2 39 Synth Bass 1 7 Harpsichord 40 Synth Bass 2 8 Clavi 41 Violin 9 Celesta 42 Viola 10 Glockenspiel 43 Cello 11 Music Box 44 Contrabass 12 Vibraphone 45 Tremolo Strings 13 Marimba 46 Pizzicato Strings 14 Xylophone 47 Orchestral Harp 15 Tubular Bells 48 Timpani 16 Dulcimer 49 String Ensemble 1 17 Organ 50 String Ensemble 2 18 Percussive Organ 51 Synth Strings 1 19 Rock Organ 52 Synth Strings 2 20 Church Organ 53 Voice Aahs 21 Reed Organ 54 Voice Oohs 22 Accordion 55 Synth Voice 23 Harmonica 56 Orchestra Hit 24 Tango Accordion 57 Trumpet 25 Acoustic Guitar (nylon) 58 Trombone 26 Acoustic Guitar (steel) 59 Tuba 27 Electric Guitar (jazz) 60 Muted Trumpet 28 Electric Guitar (clean) 61 French horn 29 Electric Guitar (muted) 62 Brass Section 30 Overdriven Guitar 63 Synth Brass 1 31 Distortion Guitar 64 Synth Brass 2 32 Guitar harmonics 65 Soprano Sax 33 Acoustic Bass 66 Alto Sax 22

68 Baritone Sax 102 FX 6 (goblins) 69 Oboe 103 FX 7 (echoes) 70 English Horn 104 FX 8 (sci-fi) 71 Bassoon 105 Sitar 72 Clarinet 106 Banjo 73 Piccolo 107 Shamisen 74 Flute 108 Koto 75 Recorder 109 Kalimba 76 Pan Flute 110 Bagpipe 77 Blown Bottle 111 Fiddle 78 Shakuhachi 112 Shanai 79 Whistle 113 Tinkle Bell 80 Ocarina 114 Agogo Bells 81 Lead 1 (square) 115 Steel Drums 82 Lead 2 (sawtooth) 116 Woodblock 83 Lead 3 (calliope) 117 Taiko Drum 84 Lead 4 (chiff) 118 Melodic Tom 85 Lead 5 (charang) 119 Synth Drum 86 Lead 6 (voice) 120 Reverse Cymbal 87 Lead 7 (fifths) 121 Guitar Fret Noise 88 Lead 8 (bass + lead) 122 Breath Noise 89 Pad 1 (new age) 123 Seashore 90 Pad 2 (warm) 124 Bird Tweet 91 Pad 3 (polysynth) 125 Telephone Ring 92 Pad 4 (choir) 126 Helicopter 93 Pad 5 (bowed) 127 Applause 94 Pad 6 (metallic) 128 Gunshot 95 Pad 7 (halo) 96 Pad 8 (sweep) 97 FX 1 (rain) 98 FX 2 (soundtrack) 99 FX 3 (crystal) 100 FX 4 (atmosphere) 23

Maximum polyphony 32 notes Soundengine polyphony 128 notes Display 2x16 LCD screen display Button Transpose up & down, select, mode Wheels pitch and mod wheels Knobs 8 Programmable Knobs slider 8 Assignable Sliders Jacks USB Power Jack, USB, USB/Keyboard MIDI OUT, Sustain Switch, AUX/Headphone OUT Power supply USB Accessories USB cable Inputs/outputs MIDI OUT 5-pin DIN*2 / USB – USB-B Sustain Pedal 1/4 " pedal jack AUX 1/4 " stereo jack Dimensions w/d/h 128 cm x 28 cm x 8 cm , weight 10 kg Changes of the technical data and the design are possible No liability is assumed for misprints 25