Nilfisk-Advance STEAMTEC 312 Operating Instructions Manual

Specifications

Brand:	Nilfisk-Advance
Category:	Steam Cleaner
Model:	STEAMTEC 312
File Type:	PDF
File Size:	—
Pages:	16

Download

Download PDF Manual (16 pages)

Read Online

Read the Nilfisk-Advance STEAMTEC 312 Operating Instructions Manual online using the built-in PDF viewer.

Text of the manual

Navodila za uporabo

Uputstvo za rad Prevádzkový návod Provozní návod Instrukcja obsługi Kezelési utasítás Ðóêîâîäñòâî ïî ýêñïëóàòàöèè Instrucciones de manejo Instruções de operação Οδηγίες λειτουργίας Ýþletme kýlavuzu 303000433 d (11.2013)

english ...............................................1-3, 61-66

deutsch ...............................................4-6, 61-66 français ...............................................7-9, 61-66 nederlands .......................................10-12, 61-66 italiano ...........................................13-15, 61-66 norsk ...........................................16-18, 61-66 svensk ...........................................19-21, 61-66 dansk ...........................................22-24, 61-66 suomi ...........................................25-27, 61-66 slovensći ...........................................28-30, 61-66 hrvatski ...........................................31-33, 61-66 slovenský ...........................................34-36, 61-66 český ...........................................37-39, 61-66 polski ...........................................40-42, 61-66 magyar ...........................................43-45, 61-66 ðóññêèé ...........................................46-48, 61-66 español ...........................................49-51, 61-66 português .........................................52-54, 61-66 ελληνικά ...........................................55-57, 61-66 türkçe ...........................................58-60, 61-66 STEAMTEC 312

For your own safety

open the safety catch. – Refilling the boiler – Emptying the boiler The use of the steam cleaner is subject to valid national regula- tions. Besides the operating instructions and the binding accident prevention regula- tions valid in the country of use, observe recognized regulations for safety and proper use. Do not use any unsafe work techniques. Before start-up Before starting up the cleaner, check that it is in proper condi- tion. Do not switch the cleaner on if there is no water in the boiler. Do not start the cleaner near explosive and/or easily flamma- ble substances. Use only tap water or distilled water to fill the boiler. Distilled water extends the service life of the cleaner. Cleaning agents, scents, solvents and other chemical substances may dam- age the cleaner and may be a risk to health. Regularly check whether the steam hose and power cord are damaged or show signs of age. Only use the cleaner if the steam hose and power cord are intact. Check the rated voltage of the steam cleaner before con- necting it to the mains supply system. Ensure that the voltage shown on the rating plate cor- responds to the voltage of the local mains power supply. Never touch the plug and elec- trical cables with wet hands. It is recommended that the steam cleaner should be con- nected via a residual current circuit breaker. This stops the supply of electricity if the leak- age current to earth exceeds 30 mA for 30 ms or it has an earth tester circuit. During use Never leave the cleaner unsu- pervised when it is connected. Never turn the cleaner over or tilt it while it is in operation. Never use the cleaner when other people are nearby. Place the cleaner as far away as possible from the object to be cleaned. Filling aperture must not be opened during use. Do not leave the cleaner near to sources of heat (fire, radiators, heating fans or other equipment that radiates heat) and never cover the cleaner. The steam jet can be danger- ous if it is misused. Never direct the jet on to persons, animals, electrically powered equipment or the cleaner itself. Remove condensed water from the nozzle before starting up the cleaner and after every work break. To clean the nozzle, direct the steam jet into a tank or sink and actuate the steam lever on the steam gun. After cleaning the nozzle you can begin work again as normal. CAUTION: Materials containing asbestos and other hazardous substanc- es should not be cleaned. Do not use the steam jet to clean switches, sockets, con- trollers, etc. and other electrical parts on electrical cleaners. Make sure that the child-proof lock is actuated on the handle during work breaks. Before using the steam cleaner, al- ways read the operating in- structions and keep them readily available. The cleaner should only be used by persons acquainted with its use. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, un- less they have been adequately supervised by a responsible person to ensure that they can use the appliance safely (IEC/ EN 60335-1) (deviations for Australia and New Zealand). Young children should be su- pervised to ensure that they do not play with the appliance (IEC/EN 60335-1) (deviations for Australia and New Zealand). CAUTION: Danger of scalding! The steam produced by the appliance can reach very high temperatures. Metal parts, water and hot steam can cause severe burns. Avoid contact with hot cleaner surfaces, emerging water and steam. The pressure tank is under pressure during operation. For this reason, never open the safety catch during operation. Be careful particularly during the following work as there may still be hot steam in the cleaner: – Opening the safety catch. The safety catch has a pres- sure relief hole. Open the safety catch by one or two turns. Wait until no steam emerges. Then completely

To prevent the cleaner from

being used inadvertently dur- ing work breaks, switch off the cleaner and pull out the mains plug. Allow the cleaner to cool down completely before storing it or opening the safety catch. Store the cleaner in a dry place. CAUTION! Unsuitable extension cords can represent a source of danger. Always unwind cord from the reels completely to prevent the power cord overheating. Extension cords are not recom- mended, however if necessaray refer to the following recom- mendations: Cord length m Cross section up to 20 m ø1.5mm² ø2.5mm² 20 to 50 m ø2.5mm² ø4.0mm² Do not damage the power cord (e.g. by driving over it, pulling or crushing it). Disconnect the power cord by grasping the plug only (do not pull or tug the power cord). Keep the power cord away from hot surfaces. CAUTION: Never immerse the cleaner or its parts in or under water or other liquids. Risk of electric shock. The cleaner may only be con- nected to a correctly installed plug socket. Switching on the cleaner may cause voltage ﬂ uctuations. Voltage ﬂ uctuations should not occur if the impedance at the transfer point is less than 0.15If in doubt ask your local electricity supplier. Observe the latest edition of the IEC regulations. Maintenance and repair CAUTION! Always remove the plug from the power supply before clean- ing or carrying out maintenance work on the cleaner. Carry out only the maintenance operations described in the operating instructions. Use only original Nilﬁ sk spare parts. The power cord must not differ from the version speciﬁ ed by the manufacturer and may only be replaced by a repair service centre authorised by the manu- facturer. Do not make technical modifi- cations to the cleaner. Please contact your local authorized Nilﬁ sk equipment distributor for all other mainte- nance or repair needs! Accessories and spare parts Use only the accessories sup- plied with the cleaner or speci- fied in the operating manual. Use original Nilfisk-spare parts only. The use of other parts can adversely affect safety. Recycling the steam cleaner Make the old cleaner unusable immediately. 1. Unplug the cleaner and cut the power cord. Do not discard of electrical ap- pliances with household waste. As specified in European Direc- tive 2002/96/EC on old electri- cal and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information. Guarantee Our general conditions of busi- ness are applicable with regard to the guarantee. Subject to change as a result of technical advances. Tests and approvals The cleaner has been approved in accordance with IEC/EN 60335-2-54. Purpose This cleaner is for domestic use only. Only use the cleaner for the cleaning jobs described in the operating manual. This cleaner is suitable for cleaning heat and moisture re- sistant surfaces. Read the operating manuals for the machines and equipment that you clean as there may be limitations stated by the manu- facturer. Do not use the cleaner for ovens, microwaves, deep freezers, refrigerators and other electrical equipment. CAUTION: In the case of heat and mois- ture sensitive materials, make a test on a concealed place first. Begin with a low steam setting and keep a minimum distance of 6 cm. The high steam tem- perature/quantity may dam- age the object to be cleaned (e.g. varnished parquet, wood, wood ceilings, plaster, window frames, surface-treated wood, decorative beams, etc.). Below we have listed some ex- amples of applications:

Tiles, stone ﬂ oors, plastic

ﬂ oors, linoleum Marble: Never clean marble directly with the floor nozzle without a cloth. It may be necessary to clean marble floors several times to completely remove old cleaning agents and grease stains. Select a low steam setting for this cleaning job. You can increase it as required. Tiles and ceramic floors: Black marks form in the crevices as a result of water and cleaning agents. Dust and other remains collect there. For daily cleaning stretch a fresh, clean cloth over the floor nozzle and secure it with the fastening clamps. Slide the floor nozzle gently over the floor. To use all of the cloth as far as possible, you can move it on the floor nozzle or reverse it. If the dirt is stubborn, you may clean the floor directly with the fold out brush without a cloth. The bristles loosen the dirt from the crevices and remove it. Subsequently, cover the floor nozzle with a cloth again and wipe over the floor again. Wände Tiles, washable wallpaper Window cleaning Windows, shop windows, mirrors Window panes: Use the window nozzle. Apply steam from top to bottom. Scrape the rubber strip over the glass without steam in order to remove the condensed water. Make sideways movements from top to bottom in order to avoid marks. CAUTION In winter the front sides of the windows must be preheated. Hold the nozzle 5-10 cm in front of the pane and allow the heat to act. Se- lect a low steam setting for inside cleaning of the windows. A high steam setting can be used for outside cleaning. Upholstery Furniture, cars, boats Fit the floor nozzle directly on to the steam gun and use it with a clean white cotton cloth. Work using quick steam spurts so that the fabric does not become soaked. Treat stubborn stains with patience. Carefully steam one particular spot for not longer than one minute. Then wait five minutes and repeat the cleaning. Make circular movements, sideways and back and forth movements so that steam penetrates into all upper layers of the fabric. Finish the cleaning by brushing the fabric in one direction to give the fabric an even appearance. Textiles Curtains, shower curtains, freshening of outer cloth- ing, stain removal The cleaner is excellently suited to smooth folds in clothes. It is sufficient to steam the fabric from a certain distance. The steam smoothes the folds without soaking the fabric as other steam devices for fabrics do. Sanitary installations Fittings, baths, shower cu- bicles and partitions, WCs, sauna, kitchens 1) To clean a bath or shower, use the round brush to clean the rails of show- er cubicles and other parts that are difficult to access or very dirty. The window wiper is very efficient to clean areas covered with tiles. To clean sanitary installations, use the jet nozzle with or without the round brush. Use a sponge or kitchen paper to remove excessive moisture and remaining dirt. Kitchen ﬁ t- tings Grills 1) , extractors1) , kitchen cabinets, oven ac- cessories Furniture Window frames, furniture, decorative beams, lamps1), chimney bricks, blinds, glass cabinets Blinds: Use the small round nylon brush. Move the brush so long over the surface until steam penetrates it. Blinds made of PVC must be treated quickly with steam. In the case of blinds made of fabric, test the material beforehand for colour fastness. Cars Dashboards, upholstery, door hinges, wheel rims Aluminium/steel To clean the inside of your car, use the floor brush with a cloth for uphol- stery and other parts and follow the instructions for domestic cleaning. Do not use the brush without a cloth when you clean leather parts. For hub caps it is best to use the jet nozzle with the round brush attachment. Bicycles, motorbikes Frames, wheel rims, spokes, saddles 1) Do not use the steam jet to clean switches, sockets, controllers, etc. and other electrical parts on electrical cleaners. Technical data Voltage 220/240 V ; 50/60 Hz Tank volume 1.2 l Fuse 10 A Max. temperature 130 °C Power consumption 1450 W Working pressure 3.8 bar Type of protection (splash water protected) IP X4

Operating elements /

Accessories Bedienelemente / Zu be hör Eléments de commande / Ac ces soires Bedieningselementen / Toebehoren Organi di comando / Accessori Betjeningselementer / Tilbehør Manöverelement / Tillbehör Betjeningselementer / Tilbehør Hallintalaitteet / Tarvikkeet Elementi upravljanja / Pribor Elementi posluživanja / Pribor Ovládacie prvky / Príslušenstvo Ovládací prvky / Příslušenství Elementy sterujące / Wyposażenie Kezelőelemek / Tartozék Органы управления / принадлежности Elementos de manejo / Accesorios Elementos de operação/ Accessórios Στοιχεία χρήσης / Συμπληρωματικός εξοπλισμός Kumanda elemanlarý / Aksesuarlar