Pakedge NK-1 Quick Start Manual

Your NK-1 includes a Wireless Access Point Controller and a Network Patroller. Refer to the Access Points label on the package to determine the number of access points the controller can manage. Default Settings IP Address: 192.168.1.240 Username/Password: pakedge/pakedgen

Tools required: • Phillips screwdriver (if using rack-mount brackets) • Computer with Ethernet interface and a web browser (an integrated DB-9 port or USB-to- Serial adapter may be necessary if you would like to use the console interface.) • Ethernet cable Installation 1 Open the box and remove the NK-1. 2 If mounting the NK-1 in a standard 19” AV rack, attach the included rack-mount brackets to the sides of the NK-1. If not mounting to a rack, ensure that the NK-1 is physically mounted near power and network connections (such as a backbone switch or firewall/router). 3 Connect power to the device. 4 Connect an Ethernet cable from your computer to the LAN port on the NK-1. You are now ready to configure the NK-1 to an IP address that matches your network.

Access Point. 1 Connect the NK-1 to power and press the power switch on the rear panel. The PWR LED will light up. 2 Connect a computer to the NK-1 through an Ethernet cable. Enter 192.168.1.240 into the address bar of your web browser. A login page opens. 3 In the username box, type pakedge. In the password box, type pakedgen, then click Login.

Cloud Patroller and the NK-1-CG1 Wireless Controller. 4 To configure Wireless, see “Configuring the Wireless Access Point Easy Wizard” on page 6. To access the Patroller, see “Navigating to the Patroller Dashboard” on page 6.

The Wizard will discover, manage, and configure your access points (APs), making it a quick and easy tool to get your wireless network up and running. To run the Wizard: 1 In the Dashboard, click NK-1-CG1. 2 If this is your first time logging in to the controller, you will be prompted to run the Wizard. Otherwise, hover over the Wizard menu and click Run Wizard. 3 Click Start the Easy Wizard to begin the wizard setup. 4 For more information on using your NK-1, see the Bakpak User Guide. Navigating to the Patroller Dashboard To navigate to the Patroller Dashboard: 1 In the main NK-1-CP Dashboard, click NK-1-NP. The Patroller Dashboard appears.

1 Open a web browser and enter the following URL: https://mybakpak.com 2 Click [Create a] Dealer Admin Account. The Register for mybakpak page opens. 3 Follow the on-screen instructions to get your Dealer Code. 4 Enter your email address, new password, time zone, and Dealer Code, then click Register.

www.pakedge.com/portal [email protected] (650) 385-8703 For non-technical inquires: [email protected] (650) 385-8701 For regulatory information: www.pakedge.com/regulatory DOC-00230-C 2016-10-14 MS 11734 Election Road, Draper, UT 84020 Main: (650) 385-8700 Fax: (650) 685-5520 www.pakedge.com [email protected] ©2016 Pakedge Device & Software Inc. All rights reserved.