Panasonic HC-X1000 Basic Operating Instructions Manual

4K Video Camera Model No. HC-X1000 SQT0478 Please read these instructions carefully before using this product, and save this manual for future use. More detailed operating instructions are available in “Operating Instructions (PDF format)”. To read it, download it from the website. https://eww.pavc.panasonic.co.jp/hdw/oi/X1000/index.html ≥ Click the desired language. * You will need Adobe Reader to browse or print the Operating Instructions (PDF format). You can download and install a version of Adobe Reader that you can use with your OS from the following website. (As of September 2014) http://www.adobe.com/products/acrobat/readstep2.html guid com

∫ Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. 2. Replace the fuse and close or attach the fuse cover. Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, ≥ Do not expose this unit to rain, moisture, dripping or splashing. ≥ Do not place objects filled with liquids, such as vases, on this unit. ≥ Use only the recommended accessories. ≥ Do not remove covers. ≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel. CAUTION! To reduce the risk of fire, electric shock or product damage, ≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. ≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. ≥ Do not place sources of naked flames, such as lighted candles, on this unit. The main plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

For Europe only ∫ EMC Electric and magnetic compatibility This symbol (CE) is located on the rating plate. ∫ Product identification marking ∫ Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/ or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Note for the battery symbol (bottom symbol): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Warning Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC or incinerate. CAUTION ≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. Product Location 4K Video Camera Bottom Battery charger Bottom AC adaptor Bottom

For Singapore only For India only For Nigerian only ∫ Cautions for use Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. ≥ Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound. ≥ Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors. ≥ Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound. ≥ If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on. Do not use this unit near radio transmitters or high-voltage lines. ≥ If you record near radio transmitters or high-voltage lines, the recorded pictures and/ or sound may be adversely affected. About connecting to a PC ≥ Do not use any other USB cables except the supplied one. About using a headphone ≥ Excessive sound pressure from earphones and headphones can cause hearing loss. ≥ Listening at full volume for long periods may damage the user’s ears. About using external microphones ≥ Keep the microphone holder screw and INPUT terminal cap out of reach of children to prevent swallowing. ≥ Make sure to use the supplied cords and cables. If you use optional accessories, use the cords and the cables supplied with them. ≥ Do not extend the cords and the cables. Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.de Contact to Authorized Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany This product is intended for general consumer. (Category 3) This product on purpose to connect to access point of 2.4 GHz WLAN. The specifications are exempted for any licensing requirement by Ministry of Communications and Information Technology, G.S.R. 45 (E)., dated 28th January, 2005. Connection and use of this communications equipment is permitted by the Nigerian Communications Commission Complies with IDA Standards DB01017 The unit and the SD card become warm during use. This is not a malfunction.

chemicals onto the unit. ≥ Before cleaning, detach the battery or pull the AC cable from the AC outlet, and then wipe the unit with a soft, dry cloth. ≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and then wipe the unit with the damp cloth. Next, dry the unit with a dry cloth. ≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter the camera body or peel the surface finish. Do not use these solvents. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. ≥ The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. ≥ If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery. ≥ When the card access lamp is lit, do not: j Remove the SD card j Turn the unit off j Insert and remove the USB cable j Expose the unit to vibrations or shock ∫ About the recording method for recording motion pictures This unit can record motion pictures using four different recording methods, including MOV (LPCM), MP4 (LPCM), MP4 and AVCHD*1. (l 27) *1 AVCHD Progressive (1080/50p, 1080/ 60p) supported. MOV (LPCM)*2, MP4 (LPCM)*2, 3: This recording method is suitable for editing images. Audio is recorded in linear PCM. MP4*2, 3: This recording method is suitable for playback and editing on a PC. Audio is recorded in AAC. *2 Those methods are not compatible with motion pictures recorded in AVCHD format. *3 Those methods can record motion pictures in formats that support 4K. 4K motion pictures offer a resolution four times higher than that of full high- definition motion pictures. AVCHD: This recording method is suitable for playback on a high-definition TV or storage on a disc. Audio is recorded in Dolby® Digital. ∫ Regarding system frequencies The NTSC/PAL standard setting of this unit can be switched in [SYSTEM FREQ]. (l 26) ≥ To use this unit in regions where the TV broadcasting system is NTSC, set it to [59.94Hz(NTSC)]. To use this unit in regions where the TV broadcasting system is PAL, set it to [50Hz(PAL)]. (Playback is not possible on TVs and other devices with a standard that differs from the system frequency setting of this unit.) ≥ If you record an AVCHD scene on the SD card, it cannot be used with a different system frequency. Use another SD card when you change the system frequency. ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit.

(When the lens, the viewfinder or LCD Monitor is fogged up) Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged. When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.) When condensation has occurred, remove the battery and/or the AC adapter and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. ∫ About security Be careful about the possibility of theft or loss of the unit, and be careful not to leave the unit unattended. Please note that Panasonic does not accept any responsibility for the compromise, manipulation, and loss of information caused by these events. ∫ Caution regarding laser beams The lens may suffer damage if struck by a laser beam. Make sure that laser beams do not strike the lens when shooting in an environment where laser devices are used. ∫ Cards that you can use with this unit SDHC Memory Card and SDXC Memory Card ≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. ≥ Refer to page 19 for more details on SD cards. ∫ For the purposes of these operating instructions ≥ The battery pack is referred to as the “Battery”. ≥ SDHC Memory Card and SDXC Memory Card are referred to as the “SD card”. ≥ The smartphone and tablet are indicated as “smartphone”. ≥ Function that can be used for Recording Mode: Function that can be used for Playback Mode: ≥ Scene(s) recorded with [REC MODE] set to [MOV (LPCM)], [MP4 (LPCM)] or [MP4]: "MOV/MP4 scene(s)". ≥ Scene(s) recorded with [REC MODE] set to [AVCHD]: "AVCHD scene(s)". ≥ The correct value for 60p/60i/30p/24p is 59.94p/59.94i/29.97p/23.98p (except C4K). ≥ Pages for reference are indicated by an arrow, for example: l 00 ∫ Installing HD Writer XE 2.0 Check the website below to download/install the software. http://panasonic.jp/support/global/cs/soft/download/f_xe20.html guid com

Accessories...............................................8 Preparation Names and Functions of Main Parts .......9 Power supply...........................................16 Charging the battery ......................... 16 Inserting/removing the battery........... 17 Charging and recording time............. 17 Connecting to the AC outlet .............. 18 Preparation of SD cards .........................19 Cards that you can use with this unit.............................................. 19 Inserting/removing an SD card.......... 20 Turning the unit on/off............................21 Selecting a mode ....................................21 Using the LCD monitor/Viewfinder........22 Using the LCD monitor...................... 22 How to use the touch screen ............ 23 Viewfinder adjustment....................... 23 Setting date and time..............................24 Using the menu screen ..........................25 Formatting cards ............................... 25 System frequency Selection.............. 26 Language Selection .......................... 26 Recording Selecting a media to record...................26 Recording motion pictures ....................27 Recording still pictures..........................27 Using the zoom .......................................28 Intelligent Auto Mode/Manual Mode......28 Manual Recording...................................29 Focus ................................................ 29 White Balance................................... 29 Iris/Gain adjustment .......................... 30 Manual shutter speed ....................... 30 USER button............................................31 Setting the USER button................... 31 Using the USER button..................... 31 Functions of the USER button .......... 32 Playback Motion picture/Still picture playback ....33 Watching Video/Pictures on your TV ............................................. 34 Wi-Fi Wi-Fi® function........................................ 35 Install the “Image App”...................... 35 Using remote operation with a direct connection............................... 36 If the Wi-Fi connection cannot be established........................................ 37 Others Troubleshooting ..................................... 38 Specification ........................................... 39 About copyright...................................... 41 Limited Warranty (ONLY FOR AUSTRALIA) ....................... 43 Contents For United Kingdom and Ireland customers ∫ Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within lreland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic UK ≥ Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com. ≥ Most major credit and debit cards accepted. ≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK. ≥ It couldn’t be simpler! ≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.

Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Sep. 2014. These may be subject to change. Optional accessories Some optional accessories may not be available in some countries. Accessories Battery pack VW-VBD58 Battery charger DE-A88D AC adaptor VSK0726 (For E) AC cable A K2CT2YY00095 (2 cables) ≥ The United Kingdom and Ireland B K2CQ2YY00117 (2 cables) ≥ Areas other than the United Kingdom and Ireland (For GC) AC cable A K2CT2YY00095 (2 cables) ≥ Saudi Arabia and Singapore B K2CJ2YY00052 (2 cables) ≥ Australia and New Zealand C K2CQ2YY00117 (2 cables) ≥ Areas other than Saudi Arabia, Singapore, Australia and New Zealand Eye cup SYA0019 USB cable K2KYYYY00245      HDMI cable K1HY19YY0024 Shoulder strap VFC4897 SYA0021 Microphone holder VYC1146 INPUT terminal cap (2 caps)*1 VJF1468 Microphone holder screws VYC1144 12 mm length (2 screws) Lens hood*2 SYK0438 *1 The INPUT terminal caps are supplied with the microphone holder. *2 The lens hood is attached to this unit at the time of purchase. Unidirectional microphone (AG-MC200G) Battery pack (lithium/VW-VBD58) Battery charger (AG-B23) LED video light (VW-LED1)

2 USB terminal [USB 3.0 HOST] 3 HDMI connector [HDMI] (l 34) 4 Audio input terminals 2 (XLR 3 pin) [AUDIO INPUT2] (l 15) 5 Handle 6 Lens hood release button 7 Audio input terminals 1 (XLR 3 pin) [AUDIO INPUT1] (l 15) 8 Microphone holder attachment part (l 14) 9 Lens hood 10 Exhaust opening (cooling fan) 11 Status indicator (l 21) 12 Power switch (l 21) 13 Recording start/stop button (l 27) 14 DC input terminal [DC IN] (l 18) ≥ Do not use any other AC adaptors except the supplied one. 15 Camera remote jack [CAM REMOTE] (3.5 mm mini jack) It is possible to adjust the focus or iris by connecting a remote control (commercially- available). ≥ It is not possible to use the remote control (commercially-available) in the Intelligent Auto Mode. [ZOOM S/S] (2.5 mm super mini jack) It is possible to operate zoom operation or recording start/stop connecting with the remote control (commercially-available). ≥ Do not connect any equipment except the remote control (commercially-available) to the camera remote jack. Brightness of the image may change or it may not focus when an equipment other than the remote control (commercially-available) is connected. 16 Headphone terminal [ ] 17 Video output connector [VIDEO OUT] (l 34) 18 Audio output connector [AUDIO OUT] (l 34) 19 Speaker 20 Shoulder strap fixture (l 14) 21 Wi-Fi Transmitter 22 Grip belt (l 13) 23 Inlet (cooling fan) Preparation Names and Functions of Main Parts 5 4 8 7 11 9 10 12 13 14 15 18 17 16 22 21 19 20 23 6 1 2 3

25 Eyepiece corrector lever (l 23) 26 User 5 buttons [USER5]/[FOCUS ASSIST] (l 31) 27 Focus auto/Manual/¶ switch [FOCUS A/M/¶] (l 29) 28 Push AF buttons [PUSH AF] 29 User 1 buttons [USER1] (l 31) 30 User 2 buttons [USER2] (l 31) 31 User 3 buttons [USER3] (l 31) 32 User 4 buttons [USER4] (l 31) 33 Focus ring (l 29) 34 Zoom ring (l 28) 35 Iris ring (l 30) 36 Iris button [IRIS] (l 30) 37 ND filter switch [ND FILTER] 38 Ring LED 39 Optical Image Stabilizer button [O.I.S.] 40 Zebra button [ZEBRA] 41 Display/Mode check button [DISP/ MODE CHK] 42 Menu button [MENU] (l 25) 43 Multi-function dial [SEL/PUSH SET] (l 29, 30) 44 Gain button [GAIN] (l 30) 45 White Balance button [W.B.] (l 29) 46 Shutter speed button [SHUTTER] (l 30) 47 Intelligent auto/Manual switch [iA/MANU] (l 28) 25 24 40 41 39 33 34 35 36 37 38 42 43 44 45 46 47 30 31 27 29 32 28 26

50 Lens cover (l 13) 51 Lens (LEICA DICOMAR) (l 13) 52 SD Card slot cover (l 20) 53 Access lamp (card 1) (l 20) 54 Card slot 1 (l 20) 55 Access lamp (card 2) (l 20) 56 Card slot 2 (l 20) 57 INPUT 1, 2 switches [INPUT1, INPUT2] 58 CH1, CH2 switches [CH1, CH2] 59 Audio control knobs [CH1, CH2] 60 LCD monitor extract part (l 22) 61 LCD monitor (Touch screen) (l 23) 62 Lens cover open/close lever (l 13) 63 Recording lamp (Rear) 64 Shoulder strap fixture (l 14) 65 Eye cup attachment part (l 13) 66 Viewfinder (l 23) 67 Eye cup (l 13) 68 Exhaust opening (cooling fan) 69 Battery release button [PUSH] (l 17) 70 Battery holder (l 17) 58 59 57 52 61 60 63 64 65 66 67 62 54 53 56 55 50 49 48 51 70 69 68 guid com

≥ This lever functions in the same manner as the zoom lever. 74 Zoom lever [T/W] (In Recording Mode) (l 28) Volume lever [rVOLs]/Thumbnail display switch [ / ] (In Playback Mode) 75 User 6 buttons [REC CHECK] (l 31) 76 NFC touch area [ ] (l 36) 77 Thumbnail button [THUMBNAIL] 78 Counter button [COUNTER] 79 Counter reset button [RESET] 80 Colour Bar Screen button [BARS] 81 Sub recording start/stop button ≥ This button functions in the same manner as the recording start/stop button. 77 78 79 80 71 72 73 76 74 75 81

You can open/close the lens cover by sliding the lens cover open/close lever. ≥ When this unit is not in use, close the lens cover to protect the lens. ≥ Do not press the lens cover hard. This may damage the lens or the lens cover. ≥ Depending on the various filters or the MC protector attached to the front side of this unit's lens, you may not be able to open/close the lens cover or attach the lens hood. ∫ Adjust the length of the grip belt so that it fits your hand. Adjust the grip belt according to the size of your hand. ≥ If you find it difficult to fasten the buckle B, move the pad A towards you, and fasten the buckle B again. ∫ Attaching the eye cup Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of the eye cup. ≥ The illustration below is an example of attaching the eye cup to use it with your right eye. If you rotate the eye cup to the left by 180° before attaching it, you can use it with your left eye. OPEN CLOSE     1 Open the buckle. 2 Pull the end of the belt. A Notch B Protrusion  

We recommend that you attach the shoulder strap (supplied) before going out of doors to record so as to avoid dropping this unit. ∫ Attaching the front microphone ≥ The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional) can be attached. Check in advance whether the microphone you wish to use can be attached. 1 Attach the microphone holder to the microphone holder attachment part. ≥ Attach by using a commercially available screw driver. ≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you might hear a squeaking sound. A 20 mm or longer      B Microphone holder attachment part C Microphone holder D Microphone holder screws

(optional) to the microphone holder, and tighten the microphone holder screws. 3 Connect the external microphone to the AUDIO INPUT1 terminal (XLR 3 pin). ≥ When wiring the microphone cable, use the cable clamper of this unit. ∫ Attaching the INPUT terminal cap Attach the INPUT terminal cap while the audio input terminals 1, 2 (XLR 3 pin) is not used. ∫ Attaching the tripod ≥ There are tripod receptacle that are compatible with 1/4-20UNC screws. ≥ Attaching a tripod with a screw length of 5.5 mm or more may damage the unit.     A Microphone cable clamper B Microphone holder screws C External microphone (optional) D AUDIO INPUT1 terminal (XLR 3 pin)  E INPUT terminal cap  F Tripod receptacle

The battery that can be used with this unit is VW-VBD58/CGA-D54s. Charging the battery Important: ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. ≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC. (The battery temperature should also be the same.) ≥ Insert the plugs as far as they will go. 1 Connect the AC cable to the battery charger and the AC outlet. 2 Insert the battery into the battery charger by aligning the arrows. Preparation Power supply It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. Charging lamp [CHARGE] A Lights up: Charging (Battery charging time: l 17) Goes off: Charging completed Flashing: Be sure to connect the unit correctly Power lamp B ≥ This will light up when the AC cable is connected. guid com

≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. Charging and recording time ≥ Temperature: 25 oC/humidity: 60%RH ≥ When using the viewfinder (times in parentheses are when using the LCD monitor) ≥ Please refer to “Operating Instructions (PDF format)” for details. ≥ “h” is an abbreviation for hour, “min” for minute and “s” for second. Charging/Recording time Battery model number [Voltage/Capacity (minimum)] Charging time Recording mode Recording format Maximum continuously recordable time Actual recordable time Supplied battery/ VW-VBD58 (optional) [7.2 V/5800 mAh] 6 h 20 min MP4 (LPCM) [4K/50p 150M] 5 h (4 h 40 min) 2 h 35 min (2 h 30 min) Removing the battery Make sure that the power switch is set to OFF and the status indicator is turned off, and then remove by holding onto it taking care not to drop. (l 21) While pressing the battery release button, remove the battery. Insert the battery until it clicks and locks.

≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. Recordable time also varies depending on the [REC FORMAT] setting. ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. ≥ The batteries heat up after use or charging. This is not a malfunction. Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. ≥ Insert the plugs as far as they will go. 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the AC adaptor to the DC input terminal [DC IN]. ≥ Make sure to set the power switch to OFF and the status indicator is turned off when disconnecting the AC adaptor. (l 21) ≥ Even when you use the AC adaptor for recording images, keep the battery connected. This allows you to continue the recording even if a power failure occurs or the AC adaptor is unplugged from the AC outlet by accident. Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If the battery discharges, then will flash red.

Cards that you can use with this unit ∫ About the Speed Class ratings for recording motion pictures ≥ Depending on [REC MODE] and [REC FORMAT], the required card differs. Use a card that meets the following ratings of the SD Speed Class or UHS Speed Class. Use of a non-compatible card may cause recording to stop suddenly. ≥ SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing. To check the class, see the labelled side, etc. of the card. ≥ Keep the Memory Card out of reach of children to prevent swallowing. Preparation Preparation of SD cards This unit (an SDXC compatible device) is compatible with SDHC Memory Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC Memory Card with other equipment, check the equipment is compatible with these Memory Cards. Recording modes Bit rates in [REC FORMAT] Speed Class ratings Label examples MOV (LPCM)/ MP4 (LPCM)/ MP4 100 Mbps or more UHS Speed Class3 50 Mbps UHS Speed Class1 or more Class10 or more AVCHD All Class4 or more

Caution: Check that the access lamp has gone off. 1 Open the SD card slot cover and insert (remove) the SD card into (from) the card slot B. ≥ One SD card can be inserted into each of the card slot 1 and the card slot 2. ≥ Face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the centre of the SD card and then pull it straight out. 2 Securely close the SD card slot cover. When using a non Panasonic SD card for the first time, or one which was previously used on another equipment, it is necessary to format the SD card. (l 25) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.    Access lamp A ≥ When this unit is accessing the SD card, the access lamp lights up.

the unit. A The status indicator lights on. ≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the power switch to OFF once, and then to ON again. Press the THUMBNAIL button to change the mode to Recording Mode or Playback Mode. ≥ When you turn on this unit, it starts up in Recording Mode. ≥ If you press the recording start/stop button or sub recording start/stop button in Playback Mode, the mode will be switched to Recording Mode and recording will start. Preparation Turning the unit on/off Preparation Selecting a mode Recording Mode (l 27) The recording screen is displayed. You can record motion pictures and still pictures. Playback Mode (l 33) The thumbnail screen for playback is displayed. You can play back motion pictures and still pictures. ON OFF   To turn off the unit Set the power switch to OFF while pressing the lock release button. The status indicator goes off.  C THUMBNAIL button guid com

The viewfinder is turned on when the LCD monitor is retracted. Using the LCD monitor 1 Extract the LCD monitor in the direction as indicated in the figure. ≥ Hold the LCD monitor extract part A, and extract the LCD monitor until it clicks into position. 2 Rotate to the position that is easy to view. To retract the LCD monitor Retract as shown in the figure with the LCD facing downward. Range of rotation of the LCD monitor ≥ It can rotate up to 270o B towards the lens. Preparation Using the LCD monitor/Viewfinder  

You can operate by directly touching the LCD monitor (touch screen) with your finger. ∫ Touch Touch and release the touch screen to select icon or picture. ≥ Touch the centre of the icon. ≥ Touching the touch screen will not operate while you are touching another part of the touch screen. ∫ Slide while touching Move your finger while pressing on the touch screen. ∫ About the operation icons / / / : Touch when changing a page or performing settings. ≥ Do not touch the LCD monitor with hard pointed tips, such as ball point pens. Viewfinder adjustment This setting will not affect the images actually recorded. It adjusts the field of view to show the image on the viewfinder clearly. 1 Adjust the viewfinder to suit your vision so that you can see the display images clearly. ≥ Be careful not to trap your fingers when moving the viewfinder. ≥ The viewfinder can be lifted vertically up to approximately 90o. ≥ Retract the LCD monitor and turn on the viewfinder. 2 Adjust the focus by operating the eyepiece corrector lever. Adjusting the field of view  A Eyepiece corrector lever

To make these settings, select [YES], and follow the instructions from Step 2-3 of the time zone setting procedure. 1 Select the menu. (l 25) 2 Touch the date or time to be set, then set the desired value using / . ≥ The year can be set between 2000 and 2039. 3 Touch [ENTER]. 4 Touch [EXIT] to complete the setting. ≥ The date and time function is driven by a built-in lithium battery. ≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach a charged battery to this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 6 months. (The battery is still being recharged even if the unit is off.) ≥ The way that time is displayed can be changed in the menu settings. [DISP SETUP] # [DATE/TIME] or [DATE FORMAT] Time difference from the Greenwich Mean Time can be set. 1 Select the menu. (l 25) 2 Touch / and set the region to record. 3 Touch [ENTER]. ≥ If the [CLOCK SET] screen appears, perform [CLOCK SET]. 4 Touch [EXIT] to complete the setting. ≥ When the time zone setting is changed, the date/time setting of the unit also changes automatically. Preparation Setting date and time : [OTHER FUNCTION] # [CLOCK SET] Time zone : [OTHER FUNCTION] # [TIME ZONE] MENU MENU

1 Press the MENU button . 2 Touch the top menu A. 3 Touch the submenu B. ≥ Next (Previous) page can be displayed by touching / . 4 Touch the desired item to enter the setting. 5 Touch [EXIT] to exit the menu setting. Formatting cards If you use the SD cards for the first time for recording with this unit, format the cards. Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC etc. ≥ When using two SD cards, format both SD cards. Select the menu. ≥ Do not format a SD card using any other equipment such as a PC. The card may not be used on this unit. Preparation Using the menu screen : [OTHER FUNCTION] # [FORMAT MEDIA] # [SD CARD 1] or [SD CARD 2] MENU MENU MENU

Set the system frequency of this unit. Change the setting when creating a motion picture that has a broadcasting system different from that of your region. Select the menu. ≥ After you have changed the system frequency, this unit will be restarted. ≥ By default, the system frequency is set to the broadcasting system of the region where this product was purchased. ≥ This function’s default setting is [50Hz(PAL)]. Language Selection You can select the language on the screen display and the menu screen. 1 Select the menu. 2 Touch the desired setting language. [SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still pictures. 1 Select the menu. 2 Touch the media to record motion pictures or still pictures. ≥ The media is selected separately for motion pictures or still pictures and is then highlighted in yellow. 3 Touch [ENTER]. : [OTHER FUNCTION] # [SYSTEM FREQ] # [59.94Hz(NTSC)] or [50Hz(PAL)] : [OTHER FUNCTION] # [LANGUAGE] Recording Selecting a media to record : [RECORD SETUP] # [MEDIA SELECT] MENU MENU MENU guid com

1 Change the mode to Recording Mode. (l 21) ≥ Extract the LCD monitor. 2 Press the recording start/ stop button B to start recording. ≥ Recording will stop when you press the recording start/stop button again. ≥ Before turning on this unit, open the lens cover. (l 13) ≥ Register [CAPTURE] to a USER button. (l 31) 1 Change the mode to Recording Mode. (l 21) ≥ Extract the LCD monitor. 2 Press the USER button to which [CAPTURE] is registered or touch the applicable USER button icon to record a still picture. ≥ For information on the locations of the USER buttons and information on USER button icons, refer to page 31. ≥ When still pictures are being recorded, the remaining recordable number of still pictures and the still picture indication are displayed. Recording Recording motion pictures Recording Recording still pictures ON OFF   A When you begin recording, ; changes to ¥.

≥ (When the picture size of [REC FORMAT] is 1920k1080 or below) It can zoom up to 40k when the [i.Zoom] is set to [ON]. ≥ Zoom magnification can be checked in the screen display of Z00 to Z99. The value gets larger when zoomed in, and the value gets smaller when zoomed out. 99 is displayed during the i.Zoom. ≥ is displayed in the Manual Mode. ≥ The modes appropriate for the condition are set just by pointing the unit to what you want to record in the Intelligent Auto Mode. Recording Using the zoom Recording Intelligent Auto Mode/Manual Mode Zoom lever/Sub zoom lever T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) Ring Zoom A side: Wide-angle recording (zoom out) B side: Close-up recording (zoom in) A Zoom ring T W W T W A B A B  iA/MANU switch Slide the switch to change the Intelligent Auto Mode/Manual Mode. MANU MNL

then use Manual Focus. ≥ Switch to Manual Mode. (l 28) 1 Set the FOCUS A/M/¶ switch to [M] to enable Manual Focus. ≥ It will switch to MF from AF. 2 Adjust the focus by rotating the focus ring. White Balance Automatic White Balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Use the multi-function dial to change the settings. ≥ Switch to Manual Mode. (l 28) 1 Press the W.B. button to switch to the Manual White Balance Mode. ≥ The White Balance mode will switch to the one you set previously. 2 Rotate the multi-function dial to switch the White Balance mode. Recording Manual Recording FOCUS A M ∞ SEL/ PUSH SET         W.B. A FOCUS A/M/¶ switch B GAIN button C W.B. button D SHUTTER button E Multi-function dial F IRIS button G Iris ring H Focus ring

the iris and gain. ∫ Iris adjustment ≥ Switch to Manual Mode. (l 28) 1 Press the IRIS button to switch to Manual Iris Mode. ≥ disappears. 2 Adjust the iris by rotating the iris ring. ∫ Gain adjustment ≥ Use the multi-function dial to change the settings. ≥ Switch to Manual Mode. (l 28) 1 Press the GAIN button to switch to Manual Gain Mode. ≥ The gain value will be displayed in dB. 2 Adjust the gain by rotating the multi-function dial. Manual shutter speed Adjust the shutter speed when recording fast-moving subjects. ≥ Use the multi-function dial to change the settings. ≥ Switch to Manual Mode. (l 28) 1 Press the SHUTTER button to switch to Manual Shutter Mode. 2 Adjust the shutter speed by rotating the multi-function dial. A Iris value B Auto iris icon* * It is displayed in Auto Iris Mode. MNL F4.0   A Gain value ≥ In Auto Gain Mode, AGC is displayed; in Manual Gain Mode, the gain value is displayed in dB. B [GAIN] MNL  0dB 

≥ There are six USER buttons (USER1 to USER6) on the main body and four USER button icons (USER7 to USER10) displayed on the LCD monitor. Setting the USER button 1 Select the menu. 2 Touch the USER button you wish to set. ≥ The USER button number and currently set function name are displayed. (For example, a display of 1. [DRS] means that [DRS] has been assigned to USER1 button.) 3 Touch the item to register. ≥ For the functions of the USER button that can be registered, refer to page 32. ≥ Touch [INH] (Inhibit) if not registering. ≥ Next (Previous) page can be displayed by touching / ≥ To continuously set other USER buttons, repeat Steps 2-3. . 4 Touch [EXIT] to complete the setting. Using the USER button To use the set USER button, press USER1 to USER6 button or touch the USER7 to USER10 button icon displayed when you touch the LCD monitor. (When you use the USER1 to USER5 button) (When you use the USER6 button) Recording USER button : [SW SETUP] # [USER BUTTON SETUP] MENU USER FOCUS ASSIST 1 2 5 3 4 6 REC CHECK guid com

Functions of the USER button ∫ List of USER button function * These functions are not available in Intelligent Auto Mode. ≥ The following USER button function can also be set from the menu. j [HISTOGRAM] j [DRS] j [IR LIGHT] j [LEVEL GAUGE] j [EVF/LCD DETAIL] j [FLASH BAND] USER7 USER8 USER10 USER9 Icon Item Function [FA] [FOCUS ASSIST] Focus Assist [B.Light] [BACKLIGHT] Backlight Compensation [S.Light] [SPOTLIGHT] Spotlight [B.FD] [BLACK FADE] Black Fade [W.FD] [WHITE FADE] White Fade [EVF/LCD] [EVF/LCD DETAIL] EVF/LCD detail [ATW.L] [ATW LOCK] ATW Lock [D.ZM] [D.ZOOM] Digital Zoom [HIST] [HISTOGRAM] Histogram [REC.C] [REC CHECK] Recording Check [LstDel] [LAST SCN DEL] Last Scene Delete [DRS] [DRS] DRS* [FRZ] [FRZ FRAME] Freeze Frame [S.Gain] [SUPER GAIN] Super Gain* [AREA] [AREA] Area Mode* [F.Tran] [FOCUS TRANS] Focus Transition* [Capture] [CAPTURE] Capture [Wi-Fi] [Wi-Fi] Wi-Fi [IR Light] [IR LIGHT] Infrared light* [Level] [LEVEL GAUGE] Level Gauge [Backgr] [BACKGROUND] Background [FBC] [FLASH BAND] Flash band compensation* [MENU] [MENU] Menu

2 Touch the play mode select icon A. 3 Select the media C you wish to play back. 4 (To set this unit to Motion Picture Playback Mode) Touch the desired recording mode D and recording format E for playback. ≥ The available recording format options differ depending on [SYSTEM FREQ] (l 26) or the recording mode option you have touched. ≥ Touch [ENTER]. ≥ A recording mode icon B will be displayed on the thumbnail display. ( / / / ) ≥ (If you have touched the recording mode option [MOV (LPCM)], [MP4 (LPCM)] or [MP4]) After you have touched a recording format option, one of the following icons will be displayed on each thumbnail. The icon to be displayed differs depending on the size of recording format. j Scenes recorded in C4K (4096k2160): j Scenes recorded in 4K (3840k2160): j Scenes recorded in FHD (1920k1080): ≥ (If you have touched the recording mode option [AVCHD]) After you have touched a recording format option, one of the following icons will be displayed on each thumbnail. j Scenes recorded in [PS 1080/50p]/[PS 1080/60p]: j Scenes recorded in [PH 1080/50i]/[PH 1080/60i]: j Scenes recorded in [HA 1080/50i]/[HA 1080/60i]: j Scenes recorded in [HE 1080/50i]/[HE 1080/60i]: j Scenes recorded in [PM 720/50p]/[PM 720/60p]: Playback Motion picture/Still picture playback 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 16 16 16 17 17 17 18 18 18 4K 4K 4K 4K 4K 4K 4K 4K 4K      C4K 4K HD PS PH HA HE PM

Touch the still picture F. 5 Touch the scene or the still picture to be played back. ≥ Next (Previous) page can be displayed by touching / . 6 Select the playback operation by touching the operation icon. Watching Video/Pictures on your TV Connect this unit to a TV using an HDMI cable (supplied) or an AV cable (commercially-available). 1 HDMI connector 2 Video output connector 3 Audio output connector ≥ Do not use any other HDMI cables except the supplied one. G Operation icon ≥ If you touch the screen while an operation icon is being displayed or do not touch the icon for a certain period, it will disappear. To display again, touch the screen.  10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 15 15 15 16 16 16 17 17 17 18 18 18 4K 4K 4K 4K 4K 4K 4K 4K 4K TC 00:02:30:00 TC 00:02:30:00 TC 00:02:30:00  VIDEO OUT AUDIO OUT L R   

from setting up a direct connection between this unit and a smartphone to getting them ready for remote operation. ≥ Please refer to the operating instructions (PDF format) of this unit for details about the setting/ operating of this unit. ≥ Please refer to the operating instructions of the device in use for details about the setting/ operating of the wireless access point or smartphone. ∫ This unit is NFC-compatible Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a Wi-Fi connection between this unit and the smartphone. This function can be used with the NFC compatible device with Android™ (OS version 2.3.3 or later). (Except for some models) Install the “Image App” * The supported OS versions are current as of September 2014 and subject to change. ≥ Use the latest version. ≥ Refer to [Help] in the “Image App” menu about function of Image App. ≥ The service may not be able to be used properly depending on the type of smartphone being used. For information on the “Image App”, check the support website below. http://panasonic.jp/support/global/cs/e_cam (This Site is English only.) ≥ When downloading the app on a mobile network, high packet communication fees may be incurred depending on the details of your contract. Wi-Fi Wi-Fi® function About the “Image App” The “Image App” is an application provided by Panasonic. For Android apps For iOS apps OS Android 2.3.3 or later* iOS 6.0 or later* (iPhone 3GS is not supported.) Installation procedure 1 Connect your Android device to a network. 2 Select “Google Play™ Store”. 3 Enter “Panasonic Image App” into the search box. 4 Select “Panasonic Image App” and install it. ≥ The icon will be added to the menu. 1 Connect your iOS device to a network. 2 Select “App StoreSM”. 3 Enter “Panasonic Image App” into the search box. 4 Select “Panasonic Image App” and install it. ≥ The icon will be added to the menu.

∫ Preparations before using remote operation 1 Install the smartphone application “Image App” on your smartphone. (l 35) 2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC- compatible), or iOS device. ≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the device will be displayed when starting up the “Image App”. 3 Register [Wi-Fi] to a USER button. (l 31) ∫ If the device is Android (NFC-compatible) ≥ Set the NFC function of the smartphone to ON. 1 Start up the smartphone application “Image App”. 2 Touch the smartphone on of this unit. ≥ Touch the NFC mark while a message asking you to touch the NFC mark on the device is displayed on the smartphone screen. ≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this unit, and then touch the smartphone on of this unit again. ≥ If the unit is not recognised even when touching the smartphone, change positions and try again. ≥ When the connection is complete, the image of this unit will be displayed on the smartphone screen. ∫ If the device is Android (non-NFC-compatible) or iOS 1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi function. ≥ is displayed 2 Select the menu. 3 Touch [Change connection type]. 4 Touch [QR code]. ≥ QR code is displayed on the screen of this unit. 5 Start up the smartphone application “Image App”. 6 On the smartphone, select [QR code], and scan the QR code displayed on the screen of this unit. ≥ When using an Android device, the smartphone and this unit are connected directly, allowing you to use remote operations. : [Wi-Fi Setup] # [Direct Connection] MENU guid com

1 Select the option that allows you to install the app on the profile screen of the “Image App”, and follow the on-screen instructions to complete the installation. 2 Press the home button to close the displayed screen. 3 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone, start up the “Image App”. ≥ When the connection is complete, will be displayed on the screen of this unit, and the image of this unit will be displayed on the smartphone screen. If the Wi-Fi connection cannot be established ≥ Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone. Problem Check points The Wi-Fi connection is not possible between this unit and a smartphone. ≥ Make sure the smartphone is properly connected to this unit by checking the Wi-Fi settings of the smartphone. ≥ Make sure the smartphone is not connected to the wireless access point. If it is connected to the wireless access point, change the Wi-Fi access point using the smartphone’s Wi-Fi set up. It takes long time every time to connect to a smartphone. ≥ It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone, but it is not a malfunction. This unit is not displayed in the Wi-Fi setting screen of the smartphone. ≥ Try switching the on/off of the Wi-Fi function in the Wi-Fi settings of the smartphone. The Wi-Fi connection is disconnected immediately. ≥ If there is a setting for avoiding poor connections in the Wi-Fi setting menu of the Android device 4.0 or later version, turn it off. Cannot be connected using NFC. ≥ Make sure your smartphone is compatible with NFC. This unit can be used with NFC-compatible terminals via Android (OS version 2.3.3 or later). ≥ Make sure the NFC function of your smartphone is on. ≥ Make sure this unit is not turned off with the power switch. ≥ Some smartphones cannot be easily checked simply by touching. If this unit is not recognised even after touching, change positions and try again by touching slowly. ≥ Touch again if it does not connect after touch. If a connection still cannot be established, close the Image App, turn off this unit, and try establishing a connection again. ≥ If the amount of time this unit is in contact with the smartphone is too short, this unit may not recognise the smartphone. Touch and hold the smartphone.

Please refer to “Operating Instructions (PDF format)” for details. Others Troubleshooting The lens, the viewfinder or LCD monitor fog up. ≥ This is due to condensation. It is not a malfunction. Please refer to page 6. Object seems to be warped. ≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor. This is not a malfunction. Problem Check points This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ≥ Charge the battery again to ensure it is sufficiently charged. (l 16) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced. This unit cannot be operated though it is turned on. This unit does not operate normally. ≥ Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.) ≥ If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from. The unit arbitrarily stops recording. ≥ Use an SD card that can be used for motion picture recording. (l 19) ≥ The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card. (l 25) Colour or brightness of the image changes, or you may see horizontal bars in the image. The LCD monitor flickers indoors. ≥ Colour or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction. ≥ Record images in Intelligent Auto Mode or adjust the shutter speed to 1/50, 1/60 or 1/100. ≥ Adjust the Synchro Scan shutter speed.

Information for your safety Others Specification Power source: DC 12 V (When using AC adaptor) DC 7.2 V (When using battery) Power consumption: 15.4 W (When using the LCD monitor) 14.3 W (When using the viewfinder) Recording format: [MOV(LPCM)]/[MP4(LPCM)]/[MP4]/ AVCHD version 2.0 (AVCHD Progressive) Motion picture compression: MPEG-4 AVC/H.264 Audio compression: [MOV(LPCM)]/[MP4(LPCM)]; Linear PCM [MP4]; AAC [AVCHD]; Dolby Digital Recording mode and transfer rate: [MOV(LPCM)]; (When [SYSTEM FREQ] set to [50Hz(PAL)]) [FHD/50p ]/[FHD/25p ]; Average 200 Mbps (VBR) [FHD/50p 100M]; Average 100 Mbps (VBR) [FHD/50p 50M]/[FHD/25p 50M]; Average 50 Mbps (VBR) (When [SYSTEM FREQ] set to [59.94Hz(NTSC)]) [FHD/60p ]/[FHD/30p ]/ [FHD/24p ]; Average 200 Mbps (VBR) [FHD/60p 100M]/; Average 100 Mbps (VBR) [FHD/60p 50M]/[FHD/30p 50M]/ [FHD/24p 50M]; Average 50 Mbps (VBR) [MP4(LPCM)]; [C4K/24p 100M]; Average 100 Mbps (VBR) (When [SYSTEM FREQ] set to [50Hz(PAL)]) [4K/50p 150M]; Average 150 Mbps (VBR) [4K/25p 100M]; Average 100 Mbps (VBR) [FHD/50p ]/[FHD/25p ]/; Average 200 Mbps (VBR) [FHD/50p 100M]; Average 100 Mbps (VBR) [FHD/50p 50M]/[FHD/25p 50M]; Average 50 Mbps (VBR) (When [SYSTEM FREQ] set to [59.94Hz(NTSC)]) [4K/60p 150M]; Average 150 Mbps (VBR) [4K/30p 100M]/[4K/24p 100M]; Average 100 Mbps (VBR) [FHD/60p ]/[FHD/30p ]/ [FHD/24p ]; Average 200 Mbps (VBR) [FHD/60p 100M]; Average 100 Mbps (VBR) [FHD/60p 50M]/[FHD/30p 50M]/ [FHD/24p 50M]; Average 50 Mbps (VBR) [MP4]; (When [SYSTEM FREQ] set to [50Hz(PAL)]) [4K/25p 100M]; Average 100 Mbps (VBR) [FHD/50p 50M]; Average 50 Mbps (VBR) (When [SYSTEM FREQ] set to [59.94Hz(NTSC)]) [4K/30p 100M]; Average 100 Mbps (VBR) [FHD/60p 50M]; Average 50 Mbps (VBR) [AVCHD]; (When [SYSTEM FREQ] set to [50Hz(PAL)]) [PS 1080/50p]; Maximum 28 Mbps (VBR) [PH 1080/50i]; Maximum 24 Mbps (VBR) [HA 1080/50i]; Average 17 Mbps (VBR) [HE 1080/50i]; Average 5 Mbps (VBR) [PM 720/50p]; Average 8 Mbps (VBR) (When [SYSTEM FREQ] set to [59.94Hz(NTSC)]) [PS 1080/60p]; Maximum 28 Mbps (VBR) [PH 1080/60i]; Maximum 24 Mbps (VBR) [HA 1080/60i]; Average 17 Mbps (VBR) [HE 1080/60i]; Average 5 Mbps (VBR) [PM 720/60p]; Average 8 Mbps (VBR) Refer to the operating instructions (PDF format) for the picture size and recordable time of a motion picture. Still picture recording format: JPEG corresponding (Design rule for Camera File system, based on Exif 2.2 standard)

format) for picture size of a still picture and number of recordable pictures. Recording media: SDHC Memory Card/SDXC Memory Card; UHS-I supported Refer to page 19 for details on SD cards usable in this unit. Image sensor: 1/2.3 type (1/2.3z) MOS image sensor Total; Approx. 18910 K Effective pixels; Motion picture/Still picture; Approx. 8290K (16:9/3840k2160), Approx. 8850K (17:9/4096k2160) Lens: Auto Iris optical zoom (Full range AF) IR ON/OFF (Infrared recording supported) F value (focal length) F1.8 to F3.6 (Focal length; 4.08 mm to 81.6 mm) 35 mm equivalent; Motion picture/Still picture; 30.8 mm to 626.0 mm (16:9/3840k2160)/ 29.5 mm to 600.0 mm (17:9/4096k2160) Minimum focus distance; Approx. 3.0 cm (Wide)/ Approx. 1.5 m (Tele) Filter diameter: 49 mm ND Filter: OFF, 1/4, 1/16, 1/64 Zoom: 20k optical zoom, 40k i.Zoom*1, 2k/5k/10k digital zoom *1 When the picture size of [REC FORMAT] is 1920k1080 or below Image stabilizer function: When the picture size of [REC FORMAT] is 1920k1080 or below: Optical (with 5-Axis Hybrid O.I.S.) When [REC FORMAT] is set to a setting with a size of C4K (4096k2160) or 4K (3840k2160): Optical (with Power O.I.S.) Monitor: 8.8 cm (3.5z) wide LCD monitor (Approx. 1152 K dots) Viewfinder: 1.15 cm (0.45z) wide EVF (Approx. 1226 K dots equivalent) Microphone: Stereo microphone Minimum required illumination: Approx. 4 lx (1/25 with super gain 30 dB) In Infrared recording; Approx. 0 lx Video output: HDMI Type A connector video output level; HDMI™ 2160p/1080p/1080i/720p/576p/480p AV connector video output level; 1.0 Vp-p, 75 h Audio output: HDMI Type A connector audio output level; Linear PCM AV connector audio output level (Line); 2 ch Headphone output; 3.5 mm stereo mini jack Camera remote terminal: 2.5 mm super mini jack k1 (ZOOM S/S) 3.5 mm mini jack k1 (FOCUS/IRIS) XLR audio input terminals: XLR (3 pin) k2 (INPUT1/INPUT2) LINE; 0 dBu/+4 dBu/ (switch with the menu) MIC; j40 dBu/j50 dBu/j60 dBu (switch with the menu) USB: Super Speed USB (USB 3.0), [DEVICE]; USB terminal Type Micro B, Reader function (No copyright protection support), [HOST]; USB terminal Type A, USB host function (for USB HDD*2), bus power supported *2 USB HDDs with a capacity of 32 GB or below or a capacity above 2 TB cannot be used Dimensions: 160 mm (W)k170 mm (H)k315 mm (D) (including projecting parts and eye cup) Mass: Approx. 1550 g [without battery (supplied) and an SD card (optional)]

Battery charger Information for your safety ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ≥ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ≥ HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ≥ LEICA is a registered trademark of Leica Microsystems IR GmbH and DICOMAR is a registered trademark of Leica Camera AG. ≥ App Store is a service mark of Apple Inc. ≥ Android and Google Play are trademarks or registered trademarks of Google Inc. ≥ The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. ≥ The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi Alliance®. Mass in operation: Approx. 1780 g [with battery (supplied) and an SD card (optional)] Operating temperature: 0 oC to 40 oC Operating humidity: 10%RH to 80%RH Battery operation time: See page 17 Wireless transmitter: Compliance standard; IEEE802.11b/g/n Frequency range used; Central frequency 2412 MHz to 2462 MHz [11ch] Encryption method; Wi-Fi compliant WPA™/ WPA2™/WEP Access method; Infrastructure mode NFC: Compliance standard; ISO/IEC 18092 NFC-F (Passive Mode) Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 42 W DC 12 V, 2.5 A Dimensions: 115 mm (W)k37 mm (H)k57 mm (D) Mass: Approx. 210 g Power source: Power consumption: DC output: AC 100 V to 240 V, 50/60 Hz 0.4 A DC 8.4 V, 1.2 A Dimensions: 70 mm (W)k44.5 mm (H)k116 mm (D) Mass: Approx. 160 g Others About copyright guid com

Alliance®. ≥ “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of Wi-Fi Alliance®. ≥ The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. ≥ QR Code is a registered trademark of DENSO WAVE INCORPORATED. ≥ Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned. This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1. The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, refer to the licence information described in the supplied leaflet “Open Source Software Information”. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0 or LGPL V2.1, as well as the respective copyright notice thereof. Contact Information: [email protected] The source code and the copyright notice are also available for free in our website below. http://panasonic.net/avc/oss/index.html

Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested. 3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product. 4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase: (a) Cabinet Part(s) (e) DVD, Blu-ray or Recordable Discs (b) Video or Audio Tapes (f) Video / Audio Heads from wear and tear in normal use (c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card (d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc 5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover (a) Internet and or DLNA connection / setup related problems (b) Access fees and or charges incurred for internet connection (c) The use of incompatible software or software not specifically stipulated in the product operations manual; and (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device. 6. To claim warranty service, when required, you should: Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre Locator for the name/address of the nearest Authorised Service Centre. Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you. Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centres: - Plasma/LCD televisions / displays (screen size greater than 103 cm) 7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de- installation or re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit. Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator. In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you. THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia website www.panasonic.com.au or contact by phone on 132 600 If phoning in, please ensure you have your operating instructions available. Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 PRO-031-F11 Issue: 4.0 01-01-2011

© Panasonic Corporation 2014 Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany EU SQT0478 F0914TC0