PROLiNK PRO2013WE Operation & User’s Manual

manual should be retained for future reference. Content IMPORTANT SAFEGUARDS 1.Introduction..........................................................................................................1 1.1 Features........................................................................................................1 1.2 Checking List...............................................................................................1 2. Installation........................................................................................................... 2 2.1 Install the pedestal........................................................................................2 2.2 Connect your monitor to computer..............................................................2 3. Front Panel overview.......................................................................................... 3 4. Access Features....................................................................................................4 4.1 Switching the Monitor On/Off.....................................................................4 4.2 Power Indicator............................................................................................4 4.3 Menu Features..............................................................................................4 4.4 OSD Functional Control Description...........................................................5 4.5 Preset Modes Timing Chart......................................................................... 7 4.6 Plug and Play............................................................................................... 8 5.Technical Information..........................................................................................9 5.1 D-SUB Signal connector pin assignment.................................................... 9 5.2 Visual Inspection........................................................................................10 5.3 Troubleshooting......................................................................................... 11

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer of an experienced radio/TV technician for help. The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two conditions:(1) this device may not cause harmful interference;and (2) this device must accept any interference received, including interference that may cause undesired operations. 【Optional, depend on selected model】 This device complies with requirement of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, and 2006/95/EC and 93/68/EEC with regard to Low Voltage directive.Socket-outlet shall be near the equipment and shall be accessible. 【Optional, depend on selected model】 Socket-outlet shall be near the equipment and shall be accessible.

2. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 4. Do not use this monitor near water. For example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc... 5. Do not place this monitor on an unstable cart, stand, or table. The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer or sold with monitor. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the television receiver and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be placed near or over a radiator or heat register. This monitor should not be placed in built-in installation such as a bookcase unless proper ventilation is provided. 7. This monitor should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied in your home, consult your monitor dealer or local power company. 8. Follow all warnings and instructions marked on the monitor. 9. For added protection for this monitor, when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the monitor due to power-line surges. 10. Do not overload wall outlets and extension cords as this can result into fire or electric shock. 11. Never push objects of any kind into this monitor through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the monitor. 12. Do not attempt to repair this monitor yourself since opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 13. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the monitor to normal operation. e. If the monitor has been dropped or the cabinet has been damaged. f. When the monitor exhibits a distinct change in performance this indicated a need for service. 14. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. 15. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is in safe operating condition. 16. The socket outlet shall be near the equipment and shall be easily accessible. 17. The power cord or the plug portion of the adapter is used as the main disconnect device.

 Compatible with standard IBM VGA, extended VGA, super VGA, IBM XGA, SXGA modes, as well as VESA resolution standards.  Universal power supply 100-240 Vac, 50/60Hz(Power box)/DC 12V(Monitor)  Microsoft Windows 95/98/2000/XP/VISTA /7 compatible VESA Display Data channel (DDC)1/2B compatible 1.2 Checking List Please make sure the following items are included with your LCD monitor:  Your monitor(with base)  Power cable  User manual  Signal cable If any of these items are missing, please contact with your dealer for technical support and customer service. 1 all-guides com

To attach the base to your monitor, please follow the steps for installation of the pedestal as below: 2.2 Connect your monitor to computer 1. Turn off the computer and unplug the power cable. 2. Connect the signal cable to the signal port on the back of the computer. 3. Connect the AC-power code one end to your LCD monitor’s AC-input socket,the other to wall-outlet. 4. Press the power button, located on the bottom side of the main unit to turn the monitor on and then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections. Connecting the monitor to the computer and the power supply 2

1、Menu Button To push menu button turns on the menu, and it activates the items you highlight. 2、Select Button(▲UP/▼DONW) To choose which function you need. You may choose DOWN counterclockwise or UP clockwise. Note: ▲UP:This key for the brightness function keys alone. ▼DOWN:This key for the contrast function keys alone. 3、Auto Button Auto adjusts the display mode to its utmost performance according to VGA setting. 4、Power Button( ) Use this button to turn the monitor on and off. 5、Power indicator This light glows green or blue during normal operation and glows black during power off, glows orange or red during power saving mode. 3

4.1 SWITCHING THE MONITOR ON/OFF This power button is used for switching the monitor on and off. Note: The power button does not disconnect the device from the mains voltage. To completely disconnect the mains voltage. Please remove the power plug from the socket. 4.2 POWER INDICATOR This indicator lights up green or blue when the monitor operates normally. If the monitor is in power saving mode, this indicator change to orange or red. When monitor is turn off, this indicator changes the color to dark. 4.3 MENU FEATURES The following features can all be accessed by using your monitor's on screen menu system. Once are finished. Making adjustments to a feature, selecting the exit icon to turn off the menu. Please follow the procedure of selection and adjust an item using the OSD system as below steps for main functions adjustment. 1. Press the MENU button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. 2. If necessary, use the DOWN (▼) or UP (▲) button to mark another icon. 3. Press the MENU button to activate the highlighted icon. 4. Use the DOWN (▼) or UP (▲) button to selected item which you needs to adjust the function,Press the MENU button to confirm your selecttion ,Use the DOWN (▼) or UP (▲) button to make the desired setting. 5. Press the AUTO button to store the set value change,than in the sub menu,you can also use the DOWN (▼) or UP (▲) button to select the functions of other to adjust, or can use the AUTO button to choose to leave. 6. Repeat step 2 through 5 to make further adjustments. All changes are stored immediately. 4

1. Main Menu OSD main menu of controls gives you an overview of the selection of controls available. When you want to make adjustment of the screen image, press and release button Menu Main menu Sub menu Sub sub menu Explain Contrast 0-100 Adjust the display contrast Brihtness 0-100 Adjust the display brihtness DCR On Open dynamic contrast Off Close dynamic contrast Color Temp Warm Setting for the warm temperature Normal Setting for the normal temperature Cool Setting for the cool temperature User Red,Green,Blue temperature trimming ECO PC Computer application mode Game Game application mode Movie Movie application mode Auto Color Yes Adjust the display white balance No Do not adjust H.Position 0-100 Adjust the horizontal position of image V.Position 0-100 Adjust the vertical position of image Auto Adjust Yes Automatically adjust the imgage horizontal/vertical position, clock, phase, sharpness to the best state No Do not adjust Clock 0-100 Adjust the image clock to reduce the horizontal scintillation Color Picture 5

vertical scintillation Sharpness 0-100 Select the sharpness to adjust the display definition Reset Yes Reset to the factory settings No Do not adjust OSD Timer 5-60 Adjust the OSD display time Transparency 0-100 Adjust the transparency of OSD H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Color Mode Mode 1 Select the OSD appearance to mode 1 Mode 2 Select the OSD appearance to mode 2 Mode 3 Select the OSD appearance to mode 3 Signal Source VGA VGA signal input Aspect Ratio 16:9 Adjust the image ratio of 16:9 model 4:3 Adjust the image ratio of 4:3 model Information Display the image resolution, horizontal and vertical frequency information Language You can choose one of the muti-languages you need To exit the main menu OSD Settings Extra Language Exit 6 all-guides com

The screen image has been optimized during manufacture for the display modes listed below. 1. Aspect ratio 16:10 Item Dot X Line Refresh rate(Hz) 1 720 x 400 70 2 640 x 480 60, 75 3 800 x 600 60, 75 4 1024 x 768 60, 75 5 1280 x 1024 60, 75 6 1440 x 900 60 7 1680 x 1050 60 8 1920 x 1200 60 NOTE: All preset modes are subject to change without notice. 19"w: Items 1~6; 20"w, 22"w: Items 1~7; 24"w, 26"w: Items 1~6, 8; 2. Aspect ratio 16:9 Item Dot X Line Refresh rate(Hz) 1 720 x 400 70 2 640 x 480 60, 75 3 800 x 600 60, 75 4 1024 x 768 60, 75 5 1366 x 768 60 6 1600x900 60 7 1280 x 1024 60,75 8 1440 x 900 60 9 1680 x 1050 60 10 1920 x 1080 60 NOTE: All preset modes are subject to change without notice. 18.5"w: 1~5; 19.5",20"w, 1~4, 6; 21.5"w, 23.6"w: 1~4, 7~10; 7

This monitor features the VESA DDC (Display Data Channel) standard, which when used with a DDC compatible video card, will simplify the monitor's set up. With VESA DDC 1/2B, when the monitor is powered up, it will automatically notify a Windows 9X/2000/XP/Vista/7 host computer of its scanning frequencies, capabilities and characteristics. Windows 9X/2000/XP/Vista/7 will automatically recognize the connection of the monitor and select the appropriate display resolution. 8

5.1 D-SUB Signal connector pin assignment PIN Signal (D-sub) PIN Signal (D-sub) 1 Red 9 5 VDC 2 Green 10 Ground 3 Blue 11 Ground 4 Ground 12 SDA (For DDC) 5 Self Test 13 H. Sync. 6 Red Ground 14 V. Sync. 7 Green Ground 15 SCL (For DDC) 8 Blue Ground D-SUB connector 9

Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault- free screen display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number of pixels faults is stipulated in the stringent international standard ISO-9241-302 (Class II). Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are about 4 million dots in total. According to ISO-9241-302 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a total of 25 faulted dots. This corresponds to approx. 0.002 % of the entire screen surface. 10

can remedy any problems by yourself. If you need assistance, please call the dealer where you purchased the LCD monitor. There is no SCREEN image, please check these items:  The power cord or the plug portion of the adapter is securely connected the monitor, the adaptor, and the wall outlet.  Check the signal cable connection between the monitor and the computer.  Adjust the brightness and contrast controls.  Monitor in power saving mode. Display image is too large or small  Use the OSD controls to adjust Auto Setup. The colors are discord  Check the signal cable connected properly.  Use OSD controls to adjust the color control setting. The image is too light or too dark  Use OSD controls to adjust the brightness and contrast. 11 1 all-guides com