Vision SB-800P Owner's Manual

OWNERS MANUAL www.visionaudiovisual.com/techaudio/sb-800p

Where applicable Vision products are certified and comply with all known local regulations to a ‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries. The product described in this owner manual is in compliance with RoHS (EU directive 2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned to the place of purchase at the end of its useful life for recycling. WARNINGS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY DECLARATION OF ORIGIN All Vision products are made in the People’s Republic of China (PRC).

Connecting the unit to an outlet supplying a higher voltage may create a fire hazard. HANDLE THE POWER CORD WITH CARE Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot in the power cord. Not only could the cord be damaged, but a short circuit could also be caused with a consequent fire hazard. PLACE OF INSTALLATION Avoid installing this product under the following conditions: • Moist or humid places • Places exposed to direct sunlight or close to heating equipment • Extremely cold locations • Places subject to excessive vibration or dust • Poorly ventilated places Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS PRODUCT! MOVING THE UNIT Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect the interconnection cords with other units. WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE, DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY. WATTS The most consistent standards for measuring watts are “Program Power” and “RMS” because these measure average sustained levels. Where loudspeakers have integrated amplifiers, then load (resistance, measured in ohms) is known so the wattage rating is fixed.

clicks to turn off Power Input (phoenix connector) Line-level Inputs: 1 x 3.5mm Minijack 1 x 2-Phono (RCA) Power LED Speaker-Level Inputs (phoenix connector) Inputs Selector

1. LAY DISPLAY ON VIEWING SURFACE 2. PUT SOUNDBAR UNDER DISPLAY 3. FIX MOUNTING STRIPS TO SOUNDBAR 4. POSITION STRIPS OVER DISPLAY MOUNTING HOLES 1 2

6. FIX WALL MOUNT EARS TO DISPLAY 7. HANG DISPLAY IN PLACE

LINE LEVEL SB-800P has an amplifier built in. It can accept stereo line-level signal which comes out of the headphone jack on a laptop or phone. To adjust volume turn the dial on the bottom (note this product does not have a remote control). SPEAKER LEVEL If flat-panel display has an amplifier built in, select SP IN to receive the more powerful speaker- level signal. This will bypass the amplifier in the SP-800P. Generally this will use unshielded speaker cable which is often black and red. To adjust volume use display remote control. There is no need to run power to soundbar. NOTE: Do not connect SPEAKER-LEVEL signal to the LINE-LEVEL inputs. SPECIFICATIONS PRODUCT DIMENSIONS: 756 x 75 x 99mm / 29.8″ x 2.9″ x 3.9″ (width x depth x height) PACKAGED DIMENSIONS: 870 x 92 x 135 mm / 34″ x 3.6 ″ x 5.3″ PRODUCT WEIGHT: 2 kg / 4.4 lb PACKAGED WEIGHT: 2.7 kg /5.9 lb CONSTRUCTION MATERIAL: ABS Plastic COLOUR: White TECHNICAL DETAILS: Amplifier Output: 2 x 15w watts (RMS) Woofer: 2 x 3.5″ Tweeter: 2 x 0.5″ Input 1: Minijack (3.5mm) Input 2: 2-Phono (RCA) (inputs are summed) Speaker Input (from flat panel if it has internal amplifier): Removable Phoenix type Output Impedance: 8 ohms Sensitivity: 88dB (1w/1m) Frequency response: 120Hz-20kHz

2 x 700mm mounting strips – to hang soundbar beneath flat panel. Note: no input cables are included POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply – 18 volt / 1 amp Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 4m. Transformer dimensions: 75 x 38 x 50mm / 3″ x 1.5″ x 2″ (tall x wide x deep) including prongs WARRANTY 3-year return to base COMPLIANCE: RoHS, WEEE, CE/EMC, FCC, RCM-POC, RCM-SDOC

This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the national distributor via your AV reseller. The liability of the manufacturer and its appointed service company is limited to the cost of repair and/or replacement of the faulty unit under warranty, except for death or injury (EU85/374/EEC). This warranty protects you against the following: • Failure of any components, including the power supply. • Damage when the product is first removed from its packaging if reported within 24 hours of purchase. If you find you do have a problem with this product, you should contact the AV reseller you purchased this product from. The original purchaser is responsible for shipment of the product to the manufacturer’s appointed service centre for repair. We will endeavour to return repaired units within 5 working days, however this may not always be possible, in which case it will be returned as soon as practicably possible. In line with our WEEE commitments, the manufacturer endeavours to replace the faulty parts of the product rather than replacing the whole unit. This warranty does not protect this product against faults caused by abuse, misuse, incorrect installation, unstable or faulty power input, which might be caused by ignoring the guidelines set out in this manual. LEGAL DISCLAIMER: Because we are committed to improving our products, the details above may change without prior warning. This User Manual is published without warranty and any improvements or changes to the User Manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made at any time and without notice. Such changes will be incorporated into new editions of the User Manual.