Panasonic TX-37LZD800F Operating Instructions Manual

To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 7.0 or later is recommended) installed on your computer. Depending on the operating system or settings on your computer, the Operating Instructions may not start automatically. In this case, open the PDF � le under \MANUAL\PDF manually to view the instructions. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. Operating Instructions LCD Television Model No. TX-37LZD800F Contents Be Sure to Read • Safety Precautions ···································4 (Warning / Caution) • Notes ························································5 • Maintenance ············································5 Quick Start Guide •Accessories / Options ·············6 •Identifying Controls ··················7 •Basic Connection ·····················8 •Auto Setup ·······························10 •How to Use Menu Functions ···12

Experience an amazing level of multi- Notice for DVB functions • Any functions related to DVB (Digital Video Broadcasting) will work in areas where DVB-T (MPEG2) digital terrestrial broadcasting are received. Consult your local Panasonic dealer with coverage areas. • DVB functions may not be available in some countries. • Some functions may not be available in some countries. • This TV has the capability for DVB speci� cations. But future DVB services cannot be guaranteed.

Camcorder Ampli� er with Speaker system VCR DVD player DVD Recorder Personal computer Set top box SD memory Card Up to 60,000 hours LCD Panel Lifetime The LCD display panel used in the 2008 VIERA TV range is rated for up to 60,000 hours.� ��This measurement is based on the time taken for the brightness of the panel to reduce to half of it’s maximum level. The time taken to reach this level may vary depending on the image content and the environment where the TV is used. Malfunctions are not taken into account.

abnormality, remove the mains plug immediately! AC 220-240 V 50 / 60 Hz Warning Handling the mains plug and lead • Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause � re.) • Ensure that the mains plug is easily accessible. • Do not touch the mains plug with a wet hand. (This may cause electrical shock.) • Do not damage the mains lead. (A damaged lead may cause � re or electrical shock.) • Do not move the TV with the lead plugged in the socket outlet. • Do not place a heavy object on the lead or place the lead near a high-temperature object. • Do not twist the lead, bend it excessively, or stretch it. • Do not pull on the lead. Hold onto the mains plug body when disconnecting lead. • Do not use a damaged mains plug or socket outlet. Do not expose to direct sunlight and other sources of heat • Avoid exposing the TV to direct sunlight and other sources of heat. To prevent � re never place any type of candle or naked � ame on top or near the TV. Power source • This TV is designed to operate on 220-240 V, 50 / 60 Hz AC. Do not place foreign objects inside the TV • Do not allow any objects to drop into the TV through the air vents (� re or electrical shock may result). Do not place the TV on sloped or unstable surfaces • The TV may fall off or tip over. Keep liquids away from the TV • To prevent damage which may result in � re or shock hazard, do not expose this appliance to dripping or splashing. • Do not place containers with water (� ower vase, cups, cosmetics, etc.) above the TV. (including on shelves above, etc.) Do not remove covers NEVER modify the TV yourself (High-voltage components may cause serious electrical shock.) • Have the TV checked, adjusted, or repaired at your local Panasonic dealer. Use only the dedicated pedestals / mounting equipment • Using an unapproved pedestal or other � xtures may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. • Use approved pedestals / mounts (p. 6). Do not allow children to handle SD Card • As with a small object, SD Card can be swallowed by young children. Please remove SD Card immediately after use.

First, remove the mains plug from the socket outlet. Display panel Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry. Caution • The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your � ngernail or other hard object. • Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may degrade surface quality). Cabinet, Pedestal Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth. Caution • Take care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure.) • Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint). • Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. � When cleaning the TV, remove the mains plug • Cleaning an energized TV may cause electrical shock. � When the TV is not going to be used for a long period of time, remove the mains plug • This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. � Allow suf� cient space around the TV for radiated heat 10 10 10 10 (cm) Minimum distance • When using the pedestal, keep the space between the bottom of the TV and the � oor surface. • In case of using Wall-hanging bracket, follow the manual of it. � Do not block the rear air vents • Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, � re or electrical shock. � Do not expose your ears to excessive volume from the headphones • Irreversible damage can be caused. 15° 463.5 mm 380 mm 15° (View from the top) Set the mark at the centre as illustrated, to have the swivel positioned at the centre of the rotation angle. � Auto power standby function • If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode. � Keep the TV away from these types of equipment • Electronic equipment In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound). • Equipment with an infrared sensor This TV also emits infrared rays (this may affect operation of other equipment). � Transport only in upright position � Adjust the LCD panel to your desired angle • Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range. • Do not place any objects or hands within the full rotation range. • Notes / • Maintenance • Safety Precautions

Remote Control • N2QAYB000238 Standard accessories Check that you have the accessories and items shown Batteries for the Remote Control (2) • R6 (UM3) Clamper Operating Instructions Optional accessories Wall-hanging bracket •TY-WK32LR2W WARNING! • Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount your unit will void your warranty. • Always be sure to ask a quali� ed technician to carry out set-up. Incorrect � tting may cause equipment to fall, resulting in injury and product damage. • Do not mount the unit directly below ceiling lights (such as spotlights, � oodlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts. • Take care when � xing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. � How to remove the Pedestal Remove four screws. Rear of the TV Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Using the clamper To tighten: Keep the knob pressed Rear of the TV To loosen: • Do not bundle the RF cable and mains lead together (could cause distorted image). • Fix cables with clampers as necessary. • When using the optional accessory, follow the option’s assembly manual to � x cables. Pan European Guarantee Card • This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. Installing remote’s batteries 1 Pull open Hook 2 Note the correct polarity (+ or -) Close Caution • Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. •Do not mix old and new batteries. •Do not mix different battery types (such as alkaline and manganese batteries). •Do not use rechargeable (Ni-Cd) batteries. • Do not burn or breakup batteries. Batteries must not be exposed to excessive heat such as sunshine, � re or the like. Cleaning cloth

EXIT RETURN INPUT DIRECT TV REC MULTI WINDOW N • Identifying Controls • Accessories / Options Cursor buttons • Makes selections and adjustments Standby On / Off switch • Switches TV On or Off standby Sound Mute • Switches sound mute On or Off Aspect • Changes aspect ratio from Aspect Selection list • Also possible by pressing this button repeatedly until you reach the desired aspect Programme Up / Down • Selects programme in sequence Teletext • Switches to teletext mode OK• Con� rms selections and choices • Press after selecting programme positions to quickly change programme VCR / DVD Panasonic equipment operations Volume Up / Down Programme Information • Displays programme information Index • Returns to the teletext index page (teletext mode) Coloured buttons • Used for the selection, navigation and operation of various functions Exit• Returns to the normal viewing screen Direct TV Recording • Records programme immediately in DVD Recorder / VCR with Q-Link or VIERA Link connection Numeric buttons • Changes programme and teletext pages • When in Standby mode, switches TV On VIERA Link Menu • Press to access VIERA Link Menu directly Guide • Displays Programme Guide or Programme List Option Menu • Easy setting for viewing and sound options Main Menu • Press to access VIERA Link, Picture, Sound and Setup Menus Subtitles • Displays subtitles Surround • Switches Surround sound Input mode selection • TV - switches DVB / Analogue mode • AV - switches to AV input mode from Input Selection list SD Card • Switches to SD Card viewing mode Return • Returns to the previous menu Hold • Freeze / unfreeze picture • Holds the current teletext page (teletext mode) Multi window TV Remote Control Normalize • Resets picture and sound settings to their default levels Power LED • Standby: red On: green • When using the remote control, indicates the TV has received a command. Identifying Controls Mains power On / Off switch • Switch On to turn on the TV or turn the TV to standby mode by the remote control Changes the input mode C.A.T.S. (Contrast Automatic Tracking System) sensor • Senses brightness to adjust picture quality in “Eco” mode in Picture Menu (p. 14) Remote control signal receiver Recording LED • Standby for Direct TV Recording :orange Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On. Function select • Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup SD Card slot Swing door to open AV3 terminals HDMI4 terminal Headphones jack

RF cable Aerial Aerial Rear of the TV Rear of the TV External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. RF cable RF cable TV only TV, DVD Recorder or VCR AC 220-240 V 50 / 60 Hz AC 220-240 V 50 / 60 Hz Note • Connect to AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link. • For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable. • Read the manual of the equipment too. Example 1 Connecting aerial Example 2 Connecting DVD Recorder / VCR

Set top box AC 220-240 V 50 / 60 Hz RF cable RF cable TV, DVD Recorder / VCR and Set top box SCART cable (fully wired) SCART cable (fully wired) RF cable RF cable Example 3 Connecting DVD Recorder / VCR and Set top box Fully wired HDMI compliant cable

INPUT EXIT RETURN TV Auto Setup - Digital and Analogue This will take about 6 minutes. EXIT RETURN 62 Channel Service Name Type Quality CBBC Channel Free TV 10 62 BBC Radio Wales Free TV 10 62 E4 Free TV 10 62 Cartoon Nwk Free TV 10 29 Analogue - 33 Free TV: 4 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2 Searching BBC1 Analogue - Analogue Scan 2 78 1 41 Digital Scan 5 69 Sending Preset Data Please wait! Remote control unavailable 0% 100% Country Italy France Austria Germany Hungary Czech Slovakia Poland Finland Norway Sweden Denmark Malta Switzerland Portugal Spain E.Eu Turkey Andorra Greece Netherlands Belgium Luxembourg Menüsprache Nederlands Português Español Italiano Français English Deutsch Latviešu Slovenščina Hrvatski Lietuvių eesti keel Srpski Românǎ Български Slovenčina Magyar čeština Polski Еλληνικά Türkçe Suomi Norsk Svenska Dansk Please select your viewing environment. Home Shop Plug the TV into mains socket and switch On (Takes a few seconds to be displayed) 1 Auto Setup Auto Setup is now complete and your TV is ready for viewing. • You can now use the remote control to turn On the TV or turn the TV to standby mode. (Power LED: On) 4 Start Auto Setup • If Q-Link, VIERA Link or similar technology, compatible recorder is connected, programme, language, country / region settings are automatically downloaded to the recorder. • Auto Setup will start to search for TV programmes and store them. The sorted programme order depends upon the TV signal, the broadcasting system and reception conditions. 3 Select your country select 2 Select the language select store • “Shop” and “Home” are equal to “Dynamic” and “Normal” respectively - “Viewing Mode” in “Picture Menu” (p. 14) 5 Select the picture setting select set Search and store TV programmes automatically. These steps are not necessary if the setup has been completed by your local dealer. • Depending on the selected countries, you may also be required to select the region.

Over 30cm MPX Stereo Sound Menu 1/2 Stereo Page up Page down On-screen operation guide will help you. • Auto Setup � ON SCREEN HELP Instructions box (example: Sound Menu) Many features available on this TV can be accessed via the On Screen Display menu. � How to use remote control Using the On Screen Displays MENU Open the main menu Move the cursor / select the menu Move the cursor / adjust levels / select from a range of options Access the menu / store settings after adjustments have been made or options have been set RETURN Return to the previous menu EXIT Exit the menu system and return to the normal viewing screen Note • If tuning has failed “Auto Setup” (p. 15) • If downloading has failed “Download” (p. 15) • To initialize all settings “Shipping Condition” (p. 15) • If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.

MULTI WINDOW DIRECT TV REC MULTI WINDOW EXIT RETURN N How to Use Menu Functions � To return to TV at any time EXIT � To return to the previous screen RETURN � To change menu pages up down Various menus allow you to make settings for the picture, sound, and other functions. 1 Display the menu MENU • Displays the functions that can be set (varies according to the input signal) 2 Select the menu Main Menu VIERA Link Picture Sound Setup (example: Picture Menu) access select 3 Select the item Picture Menu 1/2 Viewing Mode Dynamic Contrast Brightness Colour Sharpness Tint Colour Balance Warm Colour Management Off P-NR Off select (example: Picture Menu) 4 Adjust or select 1/2 Viewing Mode Dynamic Contrast Brightness Colour Sharpness Tint Colour Balance Warm Colour Management Off P-NR Off Picture Menu change store or access ( Required by some functions) (example: Picture Menu) � Choose from among alternatives � To reset the settings • To reset the picture settings only “Reset to Default” in Picture Menu (p. 14) • To reset the sound settings only “Reset to Default” in Sound Menu (p. 14) • To reset the picture and sound settings together N ( Also volume level and aspect mode are reset) • To initialize all settings “Shipping Condition” in Setup Menu (p. 15) Colour Balance Normal Changed Number and positions of alternatives � Adjust using the slide bar Sharpness Moved � Go to the next screen Tuning Menu Access Displays the next screen � Enter characters by free input menu You can enter names or numbers freely for some items. User input Name A B C D E F G H I J K L M N U V W X Y Z 0 1 2 3 4 5 6 a b c d e f g h i j k l m n u v w x y z ( ) + - . * _ O P Q R S T 7 8 9 ! : # o p q r s t Set characters RETURN Store set select

� Overview Direct TV Rec VIERA Link Menu Start Pause Live TV Access VIERA Link Control Speaker Selection Home Cinema Recorder (p. 14) Main Menu VIERA Link Picture Sound Setup The menu of the accessed equipment Link Settings Power off Link Set Power on Link Set Download Access Q-Link AV2 AV2 out TV VIERA Link On (p. 15) Tuning Menu Auto Setup Access DVB Manual Tuning Analogue Manual Tuning Access Add New DVB Services Access Access New Service Message DVB Signal Condition Access On (p. 15) • Only available items can be selected. Language OSD Language Access Preferred Audio 1 Preferred Audio 2 English Preferred Subtitles 1 English English Preferred Subtitles 2 Preferred Teletext English English (p. 15) 1/2 Viewing Mode Dynamic Contrast Brightness Colour Sharpness Tint Colour Balance Warm Colour Management Off P-NR Off Picture Menu 2/2 3D-COMB Off Reset to Default Set Picture Menu (p. 14) Mode Music Bass Treble Balance Headphone Volume Surround Off Volume Correction Sound Menu MPX Stereo 1/2 Speaker Distance to Wall Over 30cm 2/2 Reset to Default Set Sound Menu HDMI1 Input Auto Audio Preference MPEG Optical Level 0dB MPEG SPDIF Selection Auto (p. 14) 1/3 AV Colour System Auto Child Lock Access Tuning Menu Off Timer Off Language 24p Film Off Access Access Setup Menu DVB Profile Edit Access Link Settings Access GUIDE Plus+ Settings Access DVB Service List Analogue Service List Access Access 2/3 Shipping Condition Access Teletext Character Set West Setup Menu Common Interface Access System Update Access Picture Overscan On SD Card LED On 3 seconds Input Labels Access Banner Display Timeout Teletext TOP 3/3 Setup Menu Time Zone Auto Software License Access System Information Access (p. 15)

� Menu list Menu Item Adjustments / Configurations (alternatives) VIERA Link Pause Live TV Controls the connected equipment with VIERA Link function, and enables various convenient recording, playback, etc. • You can also access VIERA Link Menu directly using the VIERA Link button on the remote control. Direct TV Rec VIERA Link Control Speaker Selection Picture Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / Eco) Dynamic: Provides enhanced picture contrast and sharpness when viewing in a bright room Normal: Recommended for viewing under normal ambient room lighting conditions Cinema: For watching movies in a darkened room producing a cinema-like picture Eco: Adjusts picture settings automatically dependent on ambient lighting conditions Contrast, Brightness, • Set for each input signal Colour, Sharpness Increases or decreases the levels of these options according to your personal preference Tint With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste • For NTSC signal reception only Colour Balance Allows you to set the overall colour tone of the picture (Cool / Normal / Warm) Colour Management Automatically adjusts colours to vivid ones (Off / On) • Not valid on PC signal P-NR Picture Noise Reduction Automatically reduces unwanted picture noise and � icker noise in the contoured parts of a picture (Off / Min / Mid / Max) • Not valid on PC signal 3D-COMB Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen Set to “On” to display sharper and more accurate colours (Off / On) • For PAL or NTSC signal reception only • Not valid on RGB, S-Video, Component, PC, HDMI and SD Card Reset to Default Press the OK button to reset the present Picture Mode to the default settings Sound Mode Basic sound mode (Music / Speech) Bass Increases or decreases level to enhance or minimise lower, deeper sound output Treble Increases or decreases level to enhance or minimise sharper, higher sound output Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings (Off / Simulated Surround / SRS TruSurround XT) Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effects SRS TruSurround XT: SRS TruSurround XT® creates a high quality surround sound effect using just two speakers from the source which can output surround encoded signals • Switching is also possible by the Surround button on the remote control. Volume Correction Adjusts volume of individual programme or input mode Speaker Distance to Wall Adjusts the low frequency sound (Over 30cm / Up to 30cm) • If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended. • If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended. MPX Select stereo / monaural (Mono / Stereo) • Normally: Stereo • Stereo signal cannot be received: Mono • M1 / M2: Available while mono signal is transmitted • Analogue mode only Audio Preference Selects the initial setting for Audio tracks (Dolby Digital / MPEG) If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select Dolby Digital: A method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2ch) audio, these signals can also be multi-channel audio. MPEG: An audio compression method that compresses audio to small size without any considerable loss of audio quality. • DVB mode only SPDIF Selection Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal (Auto / PCM) Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM. PCM: Dolby Digital is output as PCM. MPEG is output as PCM. • DVB mode only MPEG Optical Level Normally, MPEG sound is larger than Dolby Digital one You can adjust the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial setting • 0dB to -12dB in -2dB reductions •DVB mode only HDMI1 / 4 Input Select to � t the input signal (Auto / Digital / Analogue) Auto: Automatic detection of digital or analogue sound source Digital: HDMI cable connection Analogue: HDMI-DVI adapter cable connection • HDMI input mode only • HDMI2 / 3 terminals are for digital signal only • No setting for HDMI2 / 3 available Reset to Default Press the OK button to reset the present Sound Mode to the default settings

� Menu list Menu Item Adjustments / Configurations (alternatives) Setup AV Colour System Selects optional colour system based on video signals in AV mode (Auto / PAL / SECAM / M.NTSC / NTSC) DVB Pro� le Edit Creates list of favourite programmes DVB Service List Skips the unwanted DVB programmes Analogue Service List Skips the unwanted Analogue programmes or edits Analogue programmes Link Settings VIERA Link Sets to use VIERA Link functions (Off / On) Q-Link Selects which AV terminal is to be used for data communication between this TV and a compatible recorder (AV1 / AV2) • Select the connected terminal to the recorder even it is not compatible with Q-Link. AV1 / AV2 out Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV2 / AV3 / Monitor) • Monitor: Image displayed on screen • Component, PC and HDMI signals cannot be outputted. Power off Link Sets to use Power off Link function (No / Set) Power on Link Sets to use Power on Link function (No / Set) Download Downloads programme, language, country / region settings to a Q-Link or VIERA Link compatible equipment connected to the TV Child Lock Locks a programme / AV input to prevent access to it Tuning Menu Auto Setup Automatically sets the programmes received in the area DVB Manual Tuning Sets the DVB programmes manually Analogue Manual Tuning Sets the Analogue programmes manually Add New DVB Services Adds new DVB services New Service Message Selects whether to give a noti� cation message when a new DVB service is found DVB Signal Condition Checks the DVB signal condition 24p Film Automatically compensates the picture frame rate for 24p signal to make the image smooth (Off / On) • For 1125 (1080) / 24p signal input only GUIDE Plus+ Settings Update Performs the update of the GUIDE Plus+ schedule and advertising informations for the GUIDE Plus+ system Postcode Sets your postcode for using the GUIDE Plus+ system System Information Displays the system information of the GUIDE Plus+ system Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Language OSD Language Changes language for on-screen displays Preferred Audio 1 / 2 Selects the preferred language for DVB multi audio (depending on the broadcaster) Preferred Subtitles 1 / 2 Selects the preferred language for DVB subtitles (depending on the broadcaster) Preferred Teletext Selects the preferred language for DVB teletext service (depending on the broadcaster) Teletext Teletext display mode (TOP (FLOF) / List) Teletext Character Set Selects teletext language (West / East1 / East2) • West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. • East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. • East2: Czech, Hungarian, Lettish, Polish, Rumanian, etc. Shipping Condition Resets all settings, for example, when moving house Common Interface Uses include to watch pay-TV System Update Downloads new software to TV Picture Overscan Selects the screen area displaying the image (Off / On) On : Enlarged the image to hide the edge of the image. Off : Displayed the image in the original size. • Set to “On” if noise is generated on the edge of the screen. • This function is available when aspect is set to Auto (16:9 signal only) or 16:9. • This function can be memorized separately for SD (Standard de� nition) and HD (High de� nition) signals. Input Labels Labels or skips each input terminal Banner Display Timeout Sets how long the information banner stays on screen • 0 (No display) to 10 sec. in 1-sec. increments SD Card LED Lights blue LED while SD Card is inserted (Off / On) Time Zone Adjusts the time data Software License Displays the software licence information System Information Displays the system information of this TV • A different menu will be displayed while PC or SD Card is used. • Only available items can be selected.

Power Consumption Average use 200 W Standby condition 0.3 W (Without monitor out recording) 20 W (With monitor out recording) • This equipment complies with the EMC standards listed below. EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024. Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Printed in Czech Republic Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic-europe.com � 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi� cation in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number