Panasonic TX-L32EM6E Operating Instructions Manual

Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.0 or later is recommended) installed on your computer. Depending on the operating system or settings on your computer, the Operating Instructions may not start automatically. In this case, open the PDF file under the “MANUAL” folder manually to view the instructions. Contents Be Sure to Read Safety Precautions ...............................................2 Maintenance ..........................................................3 Quick Start Guide Accessories / Options ..........................................4 Identifying Controls .............................................7 Basic Connection .................................................9 Auto Setup ..........................................................11 How to Use Menu Functions .............................14 Specifications .....................................................21 Licence ................................................................22 Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. English

Safety Precautions Warning Handling the mains plug and lead ● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) ● Ensure that the mains plug is easily accessible. ● Do not touch the mains plug with a wet hand. This may cause electrical shock. ● Do not use any mains lead other than that provided with this TV. This may cause fire or electrical shock. ● Do not damage the mains lead, damaged lead may cause fire or electrical shock. • Do not move the TV with the lead plugged into a socket outlet. • Do not place a heavy object on the lead or place the lead near a high temperature object. • Do not twist the lead, bend it excessively or stretch it. • Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug. • Do not use a damaged mains plug or socket outlet. • Ensure the TV does not crush the mains lead. If you find any abnormality, remove the mains plug immediately! AC 220-240 V 50/60 Hz Power source / Installation ● This TV is designed for: • AC 220-240 V, 50/60 Hz • Table-top use Do not expose to rain or excessive moisture ● To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture. ● This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. Do not remove covers and NEVER modify the TV yourself ● High voltage components may cause serious electrical shock, do not remove the rear cover as live parts are accessible when it is removed. ● There are no user serviceable parts inside. ● Have the TV checked, adjusted or repaired at your local Panasonic dealer. Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base ● The TV may fall or tip over. Do not expose the TV to direct sunlight and other sources of heat ● Avoid exposing the TV to direct sunlight and other sources of heat. Do not place foreign objects inside the TV ● Do not allow any objects to drop into the TV through the air vents as fire or electric shock may result. To prevent the spread of fire, keep candles or other open flames away from this product at all times Use only original dedicated pedestal / mounting equipment ● Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform the setup or installation. ● Use approved pedestals (p. 5) / wall-hanging brackets

● Cleaning an energised TV may cause electric shock. Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time ● This TV will still consume some power even in the Off mode, as long as the mains plug is still connected. Do not expose your ears to excessive volume from the headphones ● Irreversible damage can be caused. Do not apply strong force or impact to the display panel ● This may cause damage resulting in injury. Do not block the rear air vents ● Adequate ventilation is essential to prevent failure of electronic components. ● Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains. ● We recommend that a gap of at least 10 cm is left all around this TV even when placed inside a cabinet or between shelves. ● When using the pedestal, keep the space between the bottom of the TV and the surface where the TV is set. ● If pedestal is not used, ensure the vents in the bottom of the TV are not blocked. Minimum distance 10 10 10 10 (cm) Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture. Caution ● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface. ● Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure. ● Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint. ● The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects. ● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality. Mains plug Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.

Quick Start Guide Quick Start Guide Accessories / Options Standard accessories Remote Control ● N2QAYB000815 VIERA TOOLS INPUT TV AV MENU TEXT STTL GUIDE EXIT OK OPTION BACK/ RETURN ASPECT MUTE STILL LAST VIEW TV jkl tuv abc mno wxyz def ghi pqrs Batteries for the Remote Control (2) ● (R6AA) (p. 4) Pedestal (p. 5) Mains Lead (p. 9) Assembly screws for base (4) (p. 5) Assembly screws for pedestal (4) (p. 5) Operating Instructions Pan European Guarantee Card M4 × 14 M4 × 10 ● Accessories may not be placed all together. Take care not to throw them away unintentionally. ● This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. Installing / removing remote’s batteries 1 Remove the battery compartment cover. 2 Insert two R6AA batteries (1.5V) according to “+” and “-” polarity markings inside the battery compartment, then close the battery compartment cover. Pull open Hook Note the correct polarity (+ or -) Close Caution ● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. ● Do not mix old and new batteries. ● Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese batteries). ● Do not use rechargeable (Ni-Cd) batteries. ● Do not burn or break up batteries. ● Do not expose batteries to excessive heat such as sunshine, fire or the like. ● Make sure you dispose of batteries correctly. ● Ensure batteries are replaced correctly, there is danger of explosion and fire if battery is reversed. ● Do not disassemble or modify the remote control.

Quick Start Guide Attaching / removing the pedestal Warning Do not disassemble or modify the pedestal. ● Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Do not use any pedestal other than the one provided with this TV. ● Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. ● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened. ● If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result. Ensure that the TV does not fall over. ● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result. Two or more people are required to install and remove the TV. ● If two or more people are not present, the TV may be dropped, and personal injury may result. When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified procedure. (see below) ● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result. Assembly screws (8) Bracket Base M4 × 14 Assembly screws for base (4) M4 × 10 Assembly screws for pedestal (4) 1 Place the TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Assembling the pedestal Use the assembly screws to fasten the bracket to the base securely. ● Make sure that the screws are securely tightened. ● Forcing the assembly screws the wrong way will strip the threads. 3 Securing the TV A Adjust the position of the pedestal, then insert the pedestal to the TV screen. B Use the assembly screws to fasten securely. ● Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely. ● Carry out the work on a horizontal and level surface. M4 × 14 Hold the bracket not to fall over Front M4 × 10 A B Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Place the TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen. 2 Remove assembly screws for pedestal with screw driver. 3 Remove the pedestal from the TV.

Quick Start Guide Preventing the TV from falling over Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface. ● The place where the pedestal is to be fixed should be thick enough and made of hard material. Screw (not supplied) Diameter: 3 mm Length: 25 - 30 mm Screw hole

Identifying Controls Remote Control VIERA TOOLS INPUT TV AV MENU TEXT STTL GUIDE EXIT OK OPTION BACK/ RETURN ASPECT MUTE STILL LAST VIEW TV jkl tuv abc mno wxyz def ghi pqrs 1 3 5 8 9 4 2 6 7 10 12 11 13 14 15 17 18 16 19 20 21 1 Standby On / Off switch ● Switches TV on or off standby. ● If you cannot turn the TV power on by pressing button of the remote control, please press (POWER) button on the back of the TV. 2 VIERA TOOLS ● Displays some special feature icons and accesses easily. 3 (p. 14) ● Press to access [Picture], [Sound], [Timer], [Setup], and [Help]. 4 ● Switches to teletext mode. 5 (Information) ● Displays channel and programme information. 6 Cursor buttons ● Makes selections and adjustments. 7 ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. ● Displays the Channel List. 8 ● Easy optional setting for viewing, sound, etc. 9 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 10 (Volume up / Volume down) ● Changes volume. 11 ● Changes aspect ratio. 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on. 13 ● Freezes / unfreezes the picture. ● Holds the current teletext page (teletext mode). 14 Input mode selection ● - Switches DVB-C / DVB-T / Analogue mode. ● - Switches to AV input mode from [Input Selection] list. 15 ● Displays TV guide. 16 ● Displays subtitles. 17 ● Returns to the normal viewing screen. 18 ● Returns to the previous menu / page. 19 (Channel up / Channel down) ● Selects channel in sequence. 20 ● Switches sound mute on or off. 21 ● Switches to previously viewed channel or input mode.

Indicator / Control panel 1 C.A.T.S. (Contrast Automatic Tracking System) sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in [Picture] is set to [On]. (p. 15) 2 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 3 Power indicator Red: Standby Green: On ● The LED blinks when the TV receives a command from the remote control. 4 ● Selects an input source. ● Confirms and enters a selection on the On-Screen Display Menu. 5 Menu ● Press the button for a while to open or close the On-Screen Display Menu. 6 ● Changes channels. ● Selects item on the On-Screen Display Menu. INPUT OK HOLD for MENU 5 4 6 7 8 1 2 3 7 ● Changes volume. ● Adjusts the value of the selected item on the On-Screen Display Menu. 8 (POWER) ● Switches TV on or off. ● To completely turn off the TV, please remove the mains lead from the wall socket. Note ● If the TV is turned off by (POWER) button on the back of the TV, you cannot switch TV power on by button of the remote control. Please press (POWER) button again on the back of the TV to turn the TV on. Using the On-Screen Displays - Operation guide Many features available on this TV can be accessed via the On-Screen Display menu. � Operation guide � How to use remote control Operation guide will help you to operate by using the remote control. Example: [Sound] MENU ● Open the main menu 1/2 Mode Bass Treble Equaliser Balance Surround Headphone Volume Auto Gain Control Volume Correction Volume Correction Speaker Distance to Wall Standard 0 0 0 20 Of Of 0 Over 30cm Main Menu Picture Sound Timer Setup Help Access Select RETURN Page up Page down Selects your favourite sound mode. Operation guide OK ● Move the cursor / select from a range of options / select the menu item (up and down only) / adjust levels (left and right only) OK ● Access the menu / store settings after adjustments have been made or options have been set BACK/ RETURN ● Return to the previous menu EXIT ● Exit the menu system and return to the normal viewing screen Auto power standby function The TV will automatically go into Standby mode in the following conditions: • [Off Timer] is active in the [Timer]. • No operation is performed for 4 hours if [Auto Standby] is set to [On].

Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Terminals 6 7 8 1 2 3 4 5 1 DIGITAL AUDIO 2 AV 2 (COMPONENT / VIDEO) 3 AV 1 (SCART) (p. 10) 4 Terrestrial terminal (see below) 5 HDMI 1 - HDMI 2 (ARC) (p. 10) 6 CI slot 7 Headphone jack 8 USB port Connections Mains lead and aerial Mains lead RF cable Insert the mains plug (supplied) firmly into place. ● When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. Terrestrial aerial Cable � Antenna, Cable � Mains Lead AC 220-240 V 50/60 Hz If the antenna is placed in the wrong location, interference might happen. Note ● Do not put the Coaxial cable close to the mains lead to avoid noise. ● Do not place the Coaxial cable under the TV. ● To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct terminating plug are required. ● If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and the TV. ● Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for your particular area and the accessories required. ● Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer.

AV devices � Player TV Player HDMI cable � DVD Recorder / VCR TV RF cable RF cable Cable SCART cable DVD Recorder / VCR Terrestrial aerial � DVD Recorder / VCR and Set top box TV RF cable RF cable HDMI cable SCART cable SCART cable DVD Recorder / VCR Set top box Terrestrial aerial Note ● Please also read the manual of the equipment being connected. ● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered. ● When using a SCART or HDMI cable, use the fully wired one. ● Check the type of terminals and cable plugs are correct when connecting.

Auto Setup Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 9, 10) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. TV BACK/ RETURN OK 1 Plug the TV into mains socket and switch On ● Takes a few seconds to be displayed. ● If the red LED shows on the TV, press the Standby On / Off switch on the remote control. 2 Select the language Menüsprache Deutsch Français Italiano Español Português Nederlands English Dansk Еλληνικά Svenska Norsk Suomi Türkçe Čeština Slovenčina Български Magyar Polski Română Hrvatski Slovenščina eesti keel Srpski Latviešu Lietuvių OK select set 3 Select [Home] Select [Home] viewing environment to use in your home environment. Please select your viewing environment. Home Shop OK change confirm � [Shop] viewing environment (for shop display only) [Shop] viewing environment is the demonstration mode to explain main features of this TV. Select [Home] viewing environment to use in your home environment. ● You can return to viewing environment selection screen at the stage of [Shop] confirmation screen. 1 Return to viewing environment selection screen 2 Select [Home] Shop You have selected shop mode BACK/ RETURN Please select your viewing environment. Home Shop OK change confirm To change viewing environment later on, you will need to initialise all settings by accessing [Shipping Condition]. [Shipping Condition]

4 Select your country ● Depending on the country you select, select your Region or store the Child Lock- PIN number (“0000” cannot be stored) by following the on screen instructions. Country Germany Austria France Italy Spain Portugal Switzerland Malta Andorra Sweden Denmark Norway Finland Luxembourg Belgium Netherlands Turkey Greece Czech Poland Hungary Slovakia Slovenia Croatia Estonia Lithuania Romania Others OK select set 5 Select the mode you want to tune TV Signal Selection Start Auto Setup DVB-C DVB-T Analogue A D OK select tune / skip tuning : tune (search for the available channels) : skip tuning 6 Select [Start Auto Setup] TV Signal Selection Start Auto Setup DVB-C DVB-T Analogue A D OK select access ● Auto Setup will start to search for TV channels and store them. The stored channels and sorted channel order vary depending on the country, area, broadcasting system and conditions of signal reception. Auto Setup screen varies depending on the country you select. 1 [DVB-C Network Settings] 2 [DVB-C Auto Setup] ● Depending on the country you select, select your cable provider beforehand by following the on screen instructions. DVB-C Network Settings Frequency Network ID Auto Auto Start Auto Setup OK select [Start Auto Setup] access jkl tuv abc mno wxyz def ghi pqrs Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons. 0% 100% 1 2 3 100 100 CBBC Channel E4 100 DVB-C Auto Setup Progress This will take about 3 minutes. No. Channel Name Type Quality BBC Radio Wales Free TV Free TV Free TV Free TV : 3 Pay TV : 0 Radio: 0 Searching

4 [Analogue Auto Setup] CH 5 69 62 62 62 62 DVB-T Auto Setup Progress This will take about 3 minutes. Free TV : 4 Pay TV : 0 Radio : 0 Searching 100 100 CBBC Channel E4 100 CH Channel Name Type Quality BBC Radio Wales Free TV Free TV Free TV 100 Cartoon Nwk Free TV ● Depending on the country you select, the channel selection screen will be displayed after [DVB-T Auto Setup] if multiple channels have the same logical channel number. Select your preferred channel or exit the screen for automatic selections. CH 29 CH 33 BBC1 CH 2 78 41 CC 1 CH Channel Name This will take about 3 minutes. Analogue Auto Setup Scan Analogue: 2 Searching Auto Setup is now complete and your TV is ready for viewing. If tuning has failed, check the connection of the RF cable, and then, follow the on screen instructions.

How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. MENU EXIT OK TV BACK/ RETURN � To return to TV at any time EXIT � To return to the previous screen BACK/ RETURN � To change menu pages up down 1 Display the menu MENU ● Displays the functions that can be set (varies according to the input signal) 2 Select the menu Main Menu Picture Sound Timer Setup Help OK select access 3 Select the item 1/2 Viewing Mode Backlight Contrast Brightness Colour Tint Sharpness Colour Temperature Adaptive Backlight Control Normal Normal On On Main Menu Picture Sound Timer Setup Help Select Selects your favourite picture mode for each input. Vivid Colour 70 100 0 50 50 0 OK select access � Choose from among alternatives Colour Temperature Cool2 Cool1 Normal Warm1 Warm2 OK select store � Adjust using the slide bar Sharpness 50 Moved OK change confirm � Go to the next screen Screen Settings Displays the next screen OK access � To reset the settings ● Picture or sound settings only [Reset to Defaults] in the [Picture] or [Sound] ● To initialise all settings [Shipping Condition]

Menu list Menu Item Adjustments / Configurations (alternatives) Picture Viewing Mode Selects your favourite picture mode for each input. [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Custom] [Dynamic]: Improves contrast and sharpness for viewing in a bright room. [Normal]: Normal use for viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction for watching movies in a darkened room. [True Cinema]: Reproduces the original image quality precisely without any revision. [Custom]: Sets the settings for your preferred. Backlight, Contrast, Brightness, Colour, Sharpness Increases or decreases the levels of these options according to your personal preference. Tint Adjusts the picture hue to suit your taste. Colour Temperature Sets the overall colour tone of the picture. [Cool 2] / [Cool 1] / [Normal] / [Warm 1] / [Warm 2] Vivid Colour Automatically adjusts colours to vivid ones. [Off] / [On] Adaptive Backlight Control Automatically controls luminance level according to the image. [Off] / [On] Ambient Sensor Automatically adjusts picture settings according to ambient lighting conditions. [Off] / [On] Noise Reduction Picture Noise Reduction Reduces unwanted picture noise and flicker noise in the contoured parts of a picture. [Auto] / [Max] / [Mid] / [Min] / [Off] MPEG Noise Reduction Reduces unwanted MPEG block noise. [Auto] / [Max] / [Mid] / [Min] / [Off] Advanced Settings Adaptive Gamma Control Automatically controls middle level of luminance according to the image. Black Expander Gradually adjusts the dark shades of the image. White Balance Adjusts the white balance for red, green, and blue signal. Colour Management Adjusts the hue, saturation, luminance settings. Gamma Adjusts the gamma settings. Reset to Defaults Press button to reset to the default settings in [Advanced Settings] menu.

Menu Item Adjustments / Configurations (alternatives) Picture Option Settings Film Cadence Mode Improves vertical resolution for movie images. [Off] / [On] 1080p Pixel Direct Reproduces the original image quality for 1080p (HDMI) input signal. [Off] / [On] ● For HDMI input only HDMI Content Type Automatically adjusts picture according to received HDMI content. [HDMI1] / [HDMI2]: [Graphics] / [Photos] / [Auto] / [Off] [Auto Detail Setting]: [Photos] / [Graphics] / [Cinema] ● For HDMI input only HDMI RGB Range Changes the black level in the image for HDMI input mode. [HDMI1] / [HDMI2]: [Auto] / [Full] / [Normal] ● For HDMI input only AV Colour System Selects optional colour system based on video signals in AV mode. [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC] ● For AV input only 3D-COMB Makes still or slow moving pictures more vivid. [Off] / [On] ● Occasionally, while viewing still or slow moving pictures, colour patterning may be seen. Set to [On] to display sharper and more accurate colours. ● For PAL / NTSC signal reception in TV mode or from composite Screen Settings 16:9 Overscan Selects the screen area displaying the image for 16:9 aspect. [Off] / [On] [On] : Enlarges the image to hide the edge of the image. [Off] : Displays the image in the original size. H-size Switches over horizontal scanning size. [H-Size1] / [H-Size2] ● For TV mode, AV and HDMI input Zoom Adjustments Adjusts the vertical position and size when the aspect is set to [Just], [Sidecut Just], [Zoom], or [Sidecut Zoom] modes. Screen Display Turns the display screen off when you select [Off]. [Off] / [On] ● Press any button (except Mute and Volume) of TV or remote control to turn the screen [On] again. Copy Adjustment Copies picture adjustments to other inputs. ● Only active when [Viewing Mode] is [True Cinema] or [Custom]. Reset to Defaults Select [Yes], then press button to reset to the default settings. Sound Mode Selects your favourite sound mode. [Standard] / [Music] / [Speech] / [User] ● The selected mode affects all input signals. [Standard]: Provides the suitable sound quality for all types of scenes. [Music]: Improves sound quality for watching music videos, etc. [Speech]: Improves sound quality for watching news, drama, etc. ● In [Music] and [Speech] modes, you can adjust [Bass] and [Treble] settings. [User]: Adjusts the sounds manually by using the equaliser to suit your favourite sound quality. ● For the [User] mode, [Equaliser] will be available in the [Sound] menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency. [Equaliser] (see below) Bass Adjusts level to enhance or minimise lower, deeper sound output.

Menu Item Adjustments / Configurations (alternatives) Sound Treble Adjusts level to enhance or minimise sharper, higher sound output. Equaliser Adjusts the frequency level to suit your favourite sound quality. ● This function is available when [Mode] is set to [User]. ● Select the frequency and change the frequency level by using the cursor button. ● To enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound, raise the level of the higher frequency. ● To reset the levels of each frequency to the default settings, select [Reset to Defaults] by using the cursor button, and then press button. Balance Adjusts volume level of right and left speakers. Surround Surround sound settings. [Off] / [On] Headphone Volume Adjusts the volume of the headphones. Auto Gain Control Automatically regulates large sound level differences between channels and inputs. [Off] / [On] Volume Correction Adjusts the volume of individual channel or input mode. Speaker Distance to Wall Compensates for the low frequency sound due to the distance between the speakers and the wall. [Over 30cm] / [Up to 30cm] ● If the back space between the TV and wall is over 30 cm, [Over 30cm] is recommended. ● If the back space between the TV and wall is within 30 cm, [Up to 30cm] is recommended. MPX Selects multiplex sound mode (if available) [Stereo]: Available while mono signal is transmitted. [Mono]: When stereo signal cannot be received. ● For Analogue mode Audio Preference Selects the initial setting for audio tracks. [Auto] / [MPEG] ● For DVB mode only SPDIF Selection SPDIF: A standard audio transfer file format Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI 2 (ARC) (ARC function) terminals. ● For DVB mode or video contents of [Media player] [Auto] / [PCM] [Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as Dolby Digital Bitstream. MPEG is output as [PCM]. DTS is output as DTS for video contents of [Media player]. [PCM]: Digital output signal is fixed to [PCM]. ● ARC (Audio Return Channel) : A function of digital audio output using HDMI cable SPDIF Delay Adjusts the delay time of the sound output from DIGITAL AUDIO and HDMI 2 (ARC) (ARC function) terminals, if the sound does not synchronise the image. ● For DVB mode only HDMI Input HDMI 1 HDMI 2 Selects to fit the input signal. [Digital] / [Analogue] [Digital]: When sound is carried via the HDMI cable connection [Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection ● For HDMI input only Reset to Defaults Press button to reset to the default settings.

Menu Item Adjustments / Configurations (alternatives) Timer Off Timer Sets the time until the TV automatically goes to Standby mode. [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) Time Zone Adjusts the time data. ● The time data will be corrected based on GMT. ● Set to [Auto] to adjust the time automatically according to your area. Auto Standby Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours. [Off] / [On] ● Automatic input switching with the connected equipment affects this function and time-count will be reset. ● The notification message will appear 3 minutes before going into Standby mode. No signal Power off Enables turning the TV off if no signal is detected for 10 minutes. [Off] / [On] Setup Eco Navigation Automatically sets the TV to the most suitable energy-saving mode. Child Lock Locks a channel / AV input to prevent access to it. DVB-T Tuning Menu Favourites Edit Creates a list of favourite channels. Channel List Skips unwanted channels or edits channel list. Auto Setup Automatically sets the channels supplied. Manual Tuning Searches for the DVB-T channels manually. Update Channel List Updates Channel List while keeping your settings. Favourite Network Selects your favourite network for each broadcasters (only available in some countries). New Channel Message Selects whether to give a notification message when a new channel is found. [Off] / [On] Service Replacement Set to [On] to enable a message to switch to the available service (only available in some countries). [Off] / [On] Signal Condition Checks the DVB-T signal condition. Add TV Signal Adds the TV mode. ● This function is available if you skip any modes to tune in Auto Setup for first using the TV. ● To operate, refer to “Auto Setup” operations for first using the TV. (p. 11)

Menu Item Adjustments / Configurations (alternatives) Setup DVB-C Tuning Menu Favourites Edit Creates a list of favourite channels. Channel List Skips unwanted channels or edits channel list. Auto Setup Automatically sets the channels supplied. Manual Tuning Searches for the DVB-C channels manually. Update Channel List Updates Channel List while keeping your settings. Favourite Network Selects your favourite network for each broadcasters (only available in some countries). New Channel Message Selects whether to give a notification message when a new channel is found. [Off] / [On] Service Replacement Set to [On] to enable a message to switch to the available service (only available in some countries). [Off] / [On] Signal Condition Checks the DVB-C signal condition. Attenuator Automatically reduces the DVB-C signal to avoid the interference. [Off] / [On] Add TV Signal Adds the TV mode. ● This function is available if you skip any modes to tune in Auto Setup for first using the TV. ● To operate, refer to “Auto Setup” operations for first using the TV. (p. 11) Analogue Tuning Menu Channel List Skips unwanted channels or edits channel list. Auto Setup Automatically sets the channels supplied. Manual Tuning Searches for the analogue channels manually. Add TV Signal Adds the TV mode. ● This function is available if you skip any modes to tune in Auto Setup for first using the TV. ● To operate, refer to “Auto Setup” operations for first using the TV. (p. 11) Language OSD Language Changes language for on-screen displays. Preferred Audio 1 Preferred Audio 2 Selects the first and second preferred language for DVB multi audio (depending on the broadcaster) Preferred Subtitles 1 Preferred Subtitles 2 Selects the first and second preferred language for DVB subtitles (depending on the broadcaster). Preferred Teletext Selects the preferred language for DVB teletext service (depending on the broadcaster).

Menu Item Adjustments / Configurations (alternatives) Setup Display Settings Preferred Subtitle Type Selects the preferred subtitle type. [Standard] / [Hearing Impaired] ● [Hearing Impaired] provides aids in understanding and enjoyment with DVB subtitles (depending on the broadcaster). ● [Preferred Subtitles 1] / [Preferred Subtitles 2] are given priority. Teletext Selects the teletext display mode. [TOP] / [List] Teletext Character Set Selects teletext language. [West] / [East1] / [East2] [West]: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. [East1]: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. [East2]: Czech, Hungarian, Lettish, Polish, Rumanian, etc. Default Guide Selects the default TV Guide type when the button is pressed. (Only available in some countries) [Channel List] / [TV Guide] [TV Guide]: Electronic Programme Guide (EPG) is available. [Channel List]: The channel list will appear instead of EPG. Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [TV Selection], [Input Selection] or banner. ● To skip the input mode, select [Skip]. Banner Display Timeout Sets how long the Information banner stays on screen. [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds) Radio Mode Sets the timer for turning off the screen automatically when a radio channel is selected [Off] / [5] / [10] / [15] / [20] (seconds) ● The sound is active even if the screen turns off. This function is effective in reducing power consumption when listening to a radio channel. ● Press any buttons except Standby, Volume Up / Down and Sound Mute buttons to turn the screen on. ● Not valid on Analogue mode Common Interface Sets to watch encrypted channels, etc. VIERA Link Settings VIERA Link Sets to use VIERA Link functions. [Off] / [On] Power on Link Sets to use Power on Link function. [Off] / [On] ● This function is available when [VIERA Link] is set to [On]. Power off Link Sets to use Power off Link function. [Off] / [On] ● This function is available when [VIERA Link] is set to [On]. Standby Power Save Controls the power consumption in Standby mode of the connected equipment to reduce the consumption. [Off] / [On] ● This function is available when [VIERA Link] is set to [On] and [Power off Link] is set to [On]. Intelligent Auto Standby Makes non-watched or non-used connected equipment go into Standby mode to reduce the power consumption. [Off] / [On] ● This function is available when [VIERA Link] is set to [On].

Setup System Menu USB Keyboard Layout Selects the language that your USB keyboard supports. Shipping Condition Resets all settings to the original condition. System Update Downloads new software to this TV. Licence Menu Displays the software licence information. Other Settings GUIDE Plus+ Settings [Update]: Performs the update of the GUIDE Plus+ schedule and advertising information for the GUIDE Plus+ system (only available in some countries). [Postcode]: Sets your postcode to display advertisements in the GUIDE Plus+ system (only available in some countries). [System Information]: Displays the system information of the GUIDE Plus+ system (only available in some countries). Power Save Reduces brightness of picture to economise on power consumption. [Off] / [On] Help TV Self Test Make a diagnosis of picture or sound problems. System Information Displays the system information. ● A different menu will be displayed in the mode of [Media player]. ● Only available items can be selected. Specifications Product fiche Manufacturer Panasonic Corporation Model No. TX-L32EM6E Power source AC 220-240 V, 50/60 Hz Energy efficiency class A+ Visible screen size (diagonal) 80 cm On mode average power consumption 30 W Annual energy consumption*1 42 kWh Rated power consumption 66 W Standby power consumption*2 0.3 W Display resolution 1,920 (W) × 1,080 (H) *1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned off with the remote control and no function is active.

respected. This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) open sourced software The software categorized as (3) is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the “Software License” menu on this product. DVB ● DVB and the DVB logos are trademarks of the DVB Project. Dolby ● Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI ● HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in United States and other countries. HD TV ● The “HD TV” Logo is a trademark of DIGITALEUROPE. DTS ● Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

● This TV is designed to meet the standards (as of August, 2012) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services. Consult your local dealer for availability of DVB-T services in your area. Consult your cable service provider for availability of DVB-C services with this TV. ● This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C. ● Not all the features are available depending on the country, area, broadcaster, service provider. ● Not all CI modules work properly with this TV. Consult your service provider about the available CI module. ● This TV may not work correctly with CI module that is not approved by the service provider. ● Additional fees may be charged depending on the service provider. ● The compatibility with future services is not guaranteed. ● Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/

Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples) : This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Declaration of Conformity (DoC) Authorized Representative : Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number Panasonic Corporation Web Site: http://panasonic.net © Panasonic Corporation 2013 Printed in Poland