Technics SC-HD350 Operating Instructions Manual

Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. EB EP GN CD Stereo System Operating Instructions Model No. SC-HD550 SC-HD350 The illustrations show SC-HD550.

accessories. AC mains lead.............................................................1 pc. Remote control (EUR7702010)..................................1 pc. Remote control batteries.........................................2 pcs. FM indoor antenna ....................................................1 pc. AM loop antenna set (RSA0033B).............................1 pc. Speaker cords ¡Red and black (REE1057).......................................2 pcs. ¡Blue and gray (REE0853) ............2 pcs. SC-HD550 only Use numbers indicated in parentheses when asking for replacement parts. Antenna plug adapter (SJP9009) ..............................1 pc. (United Kingdom only) Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. These operating instructions, however, fundamentally explain the operation of system SC-HD550. System Amplifier Tuner CD player Cassette deck Speakers SC-HD550 SC-HD350 SE-HD550 ST-HD550 SL-HD550 RS-HD550 SB-HD550 SE-HD350 ST-HD350 SL-HD350 RS-HD350 SB-HD350 CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING. CLASS 1 LASER PRODUCT DANGER INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. ADVARSEL USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING. VARO! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. VARNING OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN. ADVARSEL USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN. VORSICHT UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN. (Indersiden at apparatet) (Tuotteen sisällä) (Apparatens insida) (Produktets innside) (Im Inneren des Gerätes) (Inside of product) (Back of product) (CD player) Supplied accessories For United Kingdom (RJA0053-2X) For Continental Europe (RJA0019-X) For Australia and N.Z. (RJA0035-X) For Australia and N.Z. (RSA0006-J) For Europe (RSA0007)

Safety precautions Before use Safety precautions.....................................................................3 Caution for AC Mains Lead .....................................................4 The remote control ....................................................................5 Installation....................................................................................5 Connections ................................................................................6 Front panel controls..................................................................9 Setting the time ........................................................................11 Compact disc operations CDs Normal play .................................................................................16 Other modes of play ....................................................................17 Radio operations The radio: manual tuning ......................................................12 The radio: preset tuning ........................................................13 Cassette deck operations Cassette tapes ..........................................................................14 Recording operations Before recording ......................................................................19 Preparatory steps ........................................................................19 Recording the radio.................................................................20 Recording CDs Normal recording.........................................................................21 CD editing....................................................................................21 Timer operations Using the timers The play timer..............................................................................22 The record timer ..........................................................................23 The play and record timers..........................................................24 The sleep timer............................................................................24 Using the timers together ............................................................24 Reference Using other equipment...........................................................25 Convenient functions .............................................................26 Maintenance ..............................................................................26 Troubleshooting guide...........................................................27 Technical specifications.......................................Back cover Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these operating instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

(For United Kingdom) (“EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF–KEEP DRY. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. Fuse cover Figure A Figure B 2. Replace the fuse and close or attach the fuse cover. Fuse (5 ampere) Fuse (5 ampere) Figure A Figure B

Batteries Insert so the poles (+ and –) match those in the remote control. Do not use rechargeable type batteries. Do not; ¡mix old and new batteries. ¡use different types at the same time. ¡heat or expose to flame. ¡take apart. ¡short circuit. ¡attempt to recharge alkaline or manganese batteries. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel. A Use Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit. ¡Keep the transmission window and the unit’s sensor free from dust. ¡Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. Do not; ¡put heavy objects on the remote control. ¡take the remote control apart. ¡spill liquids onto the remote control. B Installation Side-by-side set-up Stacking a CD player (SL-HD550/350) b Tuner (ST-HD550/350) c Cassette deck (RS-HD550/350) d Amplifier (SE-HD550/350) e Left speaker (SB-HD550/350) f Right speaker (SB-HD550/350) ¡These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. ¡Left and right speakers are exactly the same. Note D C Caution ¡Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent. ¡Do not attach these speakers to walls or ceilings. R6/LR6 (AA, UM-3) 2 1 A B C D 30˚ 30˚ 7 m a b e c d f b d a c

Hold the connector from both ends and pull it out. (Right) (Left) To household mains socket To connect cables Speaker Amplifier (For Australia and N.Z.) (For Europe) White line Adhesive tape HF LF Red Blue Gray Black Unless otherwise marked, the illustrations show SC-HD550 sold in Europe. SC-HD550 SC-HD350 SC-HD550 SC-HD350 4 Black Red R HF LF R HF LF R L R L Blue Black Red Gray Black Red

Appliance inlet Basic connections for supplied accessories 1 Flat cables. Keep the cables as flat as possible against the back of the unit. 2 FM antenna. Fix the other end of the antenna where reception is best. 3 AM loop antenna. Keep loose antenna cord away from other wires and cords. 4 Speaker cables. Connect the cables to the terminals of the same color. The illustration shows connection for the right speaker. Connect the left speaker in the same way. HF: High Frequency LF: Low Frequency ¡To prevent damage to circuitry, never short-circuit positive (+) and negative (–) speaker wires. ¡Be sure to connect only positive (red or gray) wires to positive (+) terminals and negative (black or blue) wires to negative (–) terminals. Incorrect connection can damage unit. Use only the supplied speakers. The combination of the system and the front speakers provides the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Note (United Kingdom only) BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE PROCEEDING TO STEP 5. 5 Connect the AC mains lead. Insertion of connector Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit. For your reference Information you enter into the unit’s memory, except for time, remains intact for up to two weeks after the mains lead is disconnected. The included AC mains lead is for use with this unit only. Do not use it with other equipment. Note Before connection ¡Do not connect the AC mains lead until all other connections are complete. ¡To prepare the FM antenna (for Australia and N.Z.) and speaker cables, twist the vinyl tip and pull off. A

White (L) Red (R) (L) (R) (L) (R) OUT DIGITAL OPTICAL IN DIGITAL OPTICAL OUT b a EXT IN ��� ��� ��� ��� ��� 30 mm 15 mm �� �� �� 5-12 m A B C Connections 8 RQT5744 Before use External unit connections A ¡Turn off the power to all units before making connections. ¡Refer to the manual of the other unit for details. (Cables and equipment not included.) To listen to other equipment (a) Connect other equipment to the EXT IN terminals to output sound through this unit's speakers or to record onto the cassette deck. You will need a phono equalizer if you connect a record player. To make digital recordings from CDs (b) Remove the dust cap before use. Use an optical fiber cable to connect other digital recording equipment to DIGITAL OPTICAL OUT on the back of the CD player. This connection enables you to make digital recordings. Optional antenna connections FM outdoor antenna ¡Disconnect the FM indoor antenna. ¡The antenna should be installed by a competent technician. Note Use outdoor antennas if radio reception is poor. AM outdoor antenna Run a piece of vinyl wire horizontally across a window or other convenient location. ¡Leave the loop antenna connected. ¡Disconnect the antenna when the unit is not in use. Do not use the antenna during an electrical storm. Note Tuner AM outdoor antenna B C Tuner MD deck, etc. Record player, etc. CD player FM outdoor antenna Tuner 75 Ω coaxial cable (not included) (For Europe) (United Kingdom only) (For Australia and N.Z.) Use the antenna plug adapter (included) A A A

CD player !8 Disc tray !9 Disc tray open/close button (; OPEN/CLOSE)....................16 @0 Random play button (RANDOM) ...........................................17 @1 Repeat button (REPEAT)........................................................17 @2 CD edit button (EDIT) .............................................................21 @3 Skip/search buttons (u/t , y/i )...............................16 @4 Stop button ( g ) .....................................................................16 @5 Pause button ( h )...................................................................16 @6 Play button and indicator ( q ) ..............................................16 The color of the indicator depends on the operation taking place. If stopped: orange If playing: green C Tuner q Display panel The display also shows information for the cassette deck, CD player, and amplifier. w Play timer/record timer button and indicator (z PLAY/z REC) .........................................................22, 23, 24 e Clock/timer button (CLOCK/TIMER)................................11, 22 r Set button (SET)......................................................................11 t Tuning/time adjust buttons (TUNE/TIME ADJUST 2, 1)...............................................11,12 y Tuning mode button (TUNE MODE) ......................................12 u RDS button (RDS) ...................................................................12 i Band select button (FM/AM) ..................................................12 u FM band select button (FM) ...................................................12 i AM band select button (AM) ..................................................12 SC-HD550 for Australia and N.Z. SC-HD350 SC-HD550 for Europe A C A B CLOCK/TIMER SET PLAY/ REC FM/AM RDS TUNE MODE TUNE/TIME ADJUST 1 2 3 4 5 6 7 8 INPUT SELECTOR VOLUME BASS TREBLE VGCA PHONES DOWN UP / I 9 10 12 13 14 16 17 11 15 REPEAT RANDOM EDIT OPEN/CLOSE 18 19 20 21 22 23 24 25 26 A B C Amplifier o Input selector (INPUT SELECTOR) .......................................25 !0 VGCA indicator (VGCA) .........................................................26 !1 Volume control (VOLUME).....................................................12 !2 Standby indicator When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. !3 Standby/on switch (8) ..........................................................11 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. !4 Bass buttons (BASS e, r).....................................................26 !5 Treble buttons (TREBLE e, r)..............................................26 !6 VGCA (variable gain control amplifier) button (VGCA).......26 !7 Headphone jack (PHONES)....................................................25 B

Remote control Buttons w, e, !1, !3, and @1 function in the same way as the controls on the main unit. #8 Sleep timer button (SLEEP) ...................................................24 #9 Numbered buttons..................................................................13 $0 Play mode button (PLAY MODE).....................................17, 18 $1 Muting button (MUTING) ........................................................26 $2 Cancel button (CANCEL) .......................................................18 $3 FM mode button (AUTO/MONO) ............................................12 $4 Input select buttons (CD, TAPE, EXT, TUNER) .....................................12, 15, 16, 25 $5 Basic operating buttons Function changes according to the source. B A COUNTER RESET REC PAUSE (TPS) DOLBY NR REV MODE TPS SKIP OPEN/CLOSE 27 28 29 30 31 36 35 37 34 32 33 SLEEP PLAY/ REC CLOCK/ TIMER PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – 1 2 3 4 5 6 ≥10 7 8 9 0 38 42 43 44 45 13 3 2 21 39 40 41 11 A B Cassette deck @7 Dolby noise reduction button (DOLBY NR)..........................14 @8 Reverse mode select button (REV MODE) ...........................14 @9 Tape Program Sensor button (TPS SKIP) ............................15 #0 Cassette holder #1 Cassette tray open/close button (; OPEN/CLOSE) ............14 #2 Counter button (COUNTER)...................................................19 #3 Counter reset button (RESET)...............................................14 #4 Record pause button and indicator (* REC PAUSE)..........20 #5 Playback buttons and indicators (w , q) ..............................14 The color of the indicator depends on the operation taking place. If stopped, fast forwarding or rewinding: orange If playing, recording, or carrying out TPS: green #6 Stop button ( g ) .....................................................................14 #7 Fast forward/rewind buttons [t (TPS) y].......................15 A

This is a 24-hour clock. The example shows how to set the clock for 16:25 (4:25 pm). 1 Press [8] to turn the unit on. 2 q Press [CLOCK/TIMER] to display “CLOCK”. Each time you press the button: w Within 7 seconds Press [SET]. 3 q Press [TUNE/TIME ADJUST (2 or 1)] to set the time. w Press [SET]. The time is set and the original display is restored. Displaying the clock Press [CLOCK/TIMER]. The clock is shown for about 5 seconds. Reset the clock regularly. CLOCK REC PLAY Original display 1 2 3 1 / I 2 1 2 CLOCK/TIMER SET 3 1 2 SET TUNE/TIME ADJUST Conserving power The unit consumes 0.9 W even when it is turned off with [8]. To save power when the unit is not to be used for a long time, unplug it from the household mains socket. Remember to reset the radio stations and any other memory items before using the unit again.

Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune with the remote control (a page 13). Preparation: Turn the unit on. 1 Press [FM/AM] to select the band. Each time you press the button: FM v AM Press [FM] or [AM] to select the band. 2 Press [TUNE MODE] to select “MANUAL”. Each time you press the button: MANUAL v PRESET 3 Press [TUNE/TIME ADJUST (2 or 1)] to select the frequency of the required station. “TUNED” is displayed when a radio station is tuned. “ST” is displayed when a stereo FM broadcast is being received. 4 Adjust the volume. Auto tuning Press and hold [TUNE/TIME ADJUST (2 or 1)] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. SC-HD550 for Australia and N.Z. SC-HD350 SC-HD550 for Europe If noise is excessive in FM Remote control only Press [AUTO/MONO] to display “MONO”. This mode improves sound quality if reception is weak for some reason but broadcasts are heard in monaural. Press [AUTO/MONO] again to cancel the mode. MONO is also canceled if the frequency is changed. Leave the tuner in AUTO for normal listening. Stereo and monaural broadcasts are automatically played as they are received. FM stations can be preset in monaural. Carry out presetting manually (a page 13). A RDS broadcasting This unit can display the text data transmitted by the radio data system (RDS) available in some areas. Changing the display Press [RDS]. Each time you press the button: /PS display (the name of the station) PTY display (the type of program) Frequency display RDS displays may not be available if reception is poor. Note / / SC-HD550 for Europe /I 4 1 1 2 3 RDS SC-HD350 SC-HD550 for Australia and N.Z. SC-HD350 SC-HD550 for Australia and N.Z. SC-HD550 for Europe SC-HD550 for Europe 1 FM AM FM/AM MHz 2 TUNE MODE 3 TUNE/TIME ADJUST MHz TUNED ST 4 VOLUME DOWN UP PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – AUTO/ MONO TUNER A One touch play Remote control only When the unit is off, press [TUNER]. The unit comes on and starts playing the radio with the volume fading in. Press [TUNER] again to select the band. A

Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency presetting is to begin at (a page 12). Hold down [SET]. Release the button when “AUTO MEMORY” appears. The tuner presets all the stations it can receive into the channels in ascending order. FM stations are preset into channels 1 to 39, and AM stations are preset into channels 21 to 39. “SET OK” is shown when presetting is complete and the last station to be preset is played. “ERROR” is displayed if the tuner doesn’t receive any stations. Do presetting manually if this happens (see below). AM stations replace any FM channels that were preset in channels 21 to 39. Note A Choose either automatic presetting, which presets all the stations the tuner can receive, or manual presetting, which allows you to select the stations to preset and the order they are to be preset in. There are 39 channels available for presetting. Manual presetting Preset the stations one at a time. q Tune to the required station. w Press [SET]. e Press [TUNE/TIME ADJUST (2 or 1)] to select a channel. r Press [SET]. The station occupying a channel is erased if another station is preset in that channel. Selecting channels On the remote control 1 Press [TUNER]. The unit automatically comes on. 2 Press the numbered buttons to select the channel. For channels 1 to 9 press the corresponding number. For channels 10 or over press [≥10], then the two digits. e.g. To select channel 21 : [≥10] / [2] / [1] “PGM” lights when a preset station is selected. On the main unit 1. Press [TUNE MODE] to select “PRESET”. 2. Press [TUNE/TIME ADJUST (2 or 1)] to select the channel. B SET TUNE MODE TUNE/TIME ADJUST 2, 1 A SET TUNED ST TUNED ST Preset channel SLEEP PLAY/ REC CLOCK/ TIMER PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING CANCEL 1 2 3 4 5 6 ≥10 7 8 9 0 1 2 B 1 TUNER 2 1 2 3 4 5 6 ≥10 7 8 9 0 MHz TUNED ST PGM

Cassette tapes Preparation: Turn the unit on. 1 Press [; OPEN/CLOSE], insert the cassette with the tape facing in. Make sure the cassette is fully inserted and press [; OPEN/CLOSE] to close the deck. 2 Press [DOLBY NR] to select Dolby NR on (“% NR” appears) or off. 3 Press [REV MODE] to select the reverse mode. Every time the button is pressed: ! : One side is played. / : Both sides are played. $ : Both sides are played eight times each. 4 Press [ w ] or [ q ]. Play begins and the indicator changes to green. q : to play the forward side (facing up). w : to play the reverse side (facing down). 5 Adjust the volume. To stop the tape Press [ g ]. Cassette tape selection and care The unit can correctly play the following types. It identifies the type automatically. Normal position/TYPE 1 ✔ High position/TYPE 2 ✔ Metal position/TYPE 4 ✔ ¡Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. ¡Tape slack can get caught up in the mechanism and should be taken up before the tape is played. ¡Endless tapes can get caught up in the deck’s moving parts if used incorrectly. Use tapes appropriate to this unit’s auto-reverse mechanism. Resetting the tape counter Press [RESET]. A /I 5 g 1 2 3 4 RESET 1 OPEN/CLOSE A 2 DOLBY NR NR 3 REV MODE NR 4 RESET NR NR 5 VOLUME DOWN UP A Dolby noise reduction Dolby NR reduces “hissing” when playing tapes. It increases the high frequency region when recording and then reduces it in playback. Use the same system during playback and recording. This unit has Dolby B NR which reduces noise to a third. Prerecorded cassettes and equipment marked “ % ” use Dolby B NR. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Cassette tapes Fast-forwarding and rewinding Press [t (TPS)] or [(TPS) y] while the tape is stopped. A Tape direction q w Rewind t y Fast-forward y t Tape direction q w Backward t y Forward y t One touch play Remote control only When a cassette is loaded and the unit is off, press [TAPE]. The unit comes on and starts play in the direction last selected with the volume fading in. B Tape program sensor (TPS) TPS finds the beginning of a track and starts play from there. You can skip up to nine tracks. 1 Press [TPS SKIP] to select the number of tracks you want to skip. 2 Press [t (TPS)] or [(TPS) y] to select the direction. C t (TPS) y A PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – TAPE 1 2 g B C 1 TPS SKIP 2 (TPS) Pressing [t (TPS)] or [(TPS) y] during play takes you to the beginning of the current track or the next track, depending on tape direction. To cancel Press [ g ]. ¡Stop the tape before changing the TPS direction. ¡TPS may not operate correctly in the following situations: If the interval between tracks is less than 4 seconds. If there is noise between tracks. If there are silent parts within tracks. Note

CDs Normal play Preparation: Turn the unit on. 1 Press [; OPEN/CLOSE] to open the tray. Set a CD label up on the tray. Press [; OPEN/CLOSE] to close the tray. The number of tracks and playing time is displayed if “CD” is selected as the source. 2 Press [ q ] to start play. 3 Adjust the volume. To stop the disc Press [ g ]. To pause play Press [ h ] during play. Press [ h ] or [ q ] to resume play. Skipping tracks Press [ u/t ] (backward), or [ y/i ] (forward). Searching through tracks During play Press and hold [ u/t ] (backward), or [ y/i ] (forward). “NO DISC” is displayed When the unit is in CD mode but a disc isn’t in the player. ¡You cannot skip to tracks already played in random play (a page 17). ¡Skipping is done in the selected order in program play (a page 18). ¡You can search only within tracks in random and program play. Note CD selection and care B Choose discs with this mark: (a) Do not; ¡use irregularly shaped CDs (b). ¡attach extra labels and stickers. ¡use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers (c). ¡attach scratch-proof covers or any other kind of accessory. ¡write anything on the CD. ¡clean CDs with liquids (Wipe with a soft, dry cloth.). This unit may not be able to play some CD-R due to the condition of the recording. It can not play CD-RW. 3 /I 1 2 u/t y/i h g 1 OPEN/CLOSE 2 3 VOLUME DOWN UP B a b c PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – CD A Total number of tracks Track number Total playing time Elapsed play time Label must face upward. One touch play Remote control only When a CD is loaded and the unit is off, press [CD]. The unit comes on and starts play with the volume fading in. A

CDs Other modes of play Direct access play: Starts normal play from a selected track Remote control only Preparation: Press [CD] to put the unit in CD mode. Select the track with the numbered buttons. For tracks numbered 10 and over, press [≥10] then the two digits. A Random play: Plays the tracks once each in random order Preparation: Turn [INPUT SELECTOR] to select CD mode. Press [RANDOM]. On the remote control 1. Press [PLAY MODE] while stopped to display “RND”. Each time you press the button: 2. Press [ q ]. To cancel Press [ g ] twice so “RND” goes out. PGM RND off (normal play) C Repeat play: Repeats one track or all tracks During play, press [REPEAT] to select the repeat mode. Each time you press the button: REPEAT TR: Repeats one track. REPEAT ALL: Repeats all tracks. REPEAT OFF: Cancels repeat play. Repeat is also canceled when you press [ g ]. “&” goes out. Repeating selected tracks 1. Program the tracks (a page 18). 2. Press [REPEAT] to select “REPEAT ALL”. Note B SLEEP PLAY/ REC CLOCK/ TIMER PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – 1 2 3 4 5 6 ≥10 7 8 9 0 PLAY MODE CD REPEAT q g 1-9, 0, ≥10 A 1 2 3 4 5 6 ≥10 7 8 9 0 REPEAT RANDOM B C RND INPUT SELECTOR REPEAT RANDOM g

CDs Program play: Select up to 24 tracks to play in the order you choose Remote control only Preparation: Press [CD] to put the unit in CD mode. 1 While stopped, Press [PLAY MODE] to display “PGM”. Each time you press the button: 2 Enter the track number with the numbered buttons. For tracks numbered 10 and over, press [≥10] then the two digits. Repeat this step to program the tracks in the required order. 3 Press [ q ]. All the tracks are played in the selected order. To cancel Press [ g ] twice so “PGM” goes out. “CLEAR” is displayed. “FULL” is displayed If 24 tracks have been programmed. No more tracks can be programmed. “- -:- -” is displayed If total playing time for the tracks is over 99 minutes and 59 seconds. To check the contents of the program Press [ u/t ] or [ y/i ] while stopped. The track numbers and program positions are displayed in order each time you press the button. To add to the end of the program While stopped, repeat step 2. Canceling tracks (only while stopped) PGM RND off (normal play) From the last track All tracks Press [CANCEL]. “CANCEL” is displayed. Press [ g ]. Program play is also cleared. A particular track Select the track with [ u/t ] or [ y/i ] then press [CANCEL]. SLEEP PLAY/ REC CLOCK/ TIMER PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME CANCEL + – 1 2 3 4 5 6 ≥10 7 8 9 0 CD CANCEL 1 2 3 1 PLAY MODE PGM PGM PGM 2 1 2 3 4 5 6 ≥10 7 8 9 0 Programmed track number Programmed order Total playing time 3 Other modes of play

The unit automatically identifies the type of tape. Normal position/TYPE 1 ✔ High position/ TYPE 2 ✔ Metal position/ TYPE 4 ✔ To display the tape counter while recording Press [COUNTER]. The counter is displayed for about five seconds. A Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown, being careful not to cover the high position discrimination hole. B Volume and sound quality Recordings are unaffected by changes to volume and sound quality. Preparatory steps Do these steps before each recording. Wind up the leader tape so recording can begin immediately. 1 Press [; OPEN/CLOSE], insert the cassette with the tape facing in. Make sure the cassette is fully inserted and press [; OPEN/CLOSE] to close the deck. 2 Press [DOLBY NR] to select Dolby NR on (“% NR” appears) or off. (a “Dolby noise reduction” page 14) 3 Press [REV MODE] to select the reverse mode. Each time you press the button: ! : One side only records. / and $ : Both sides record (forward / reverse). “$” automatically changes to “/” when [* REC PAUSE] is pressed. C Erasing recordings 1. Turn [INPUT SELECTOR] to select “TAPE”. 2. Press [DOLBY NR] so that “% NR” goes off. 3. Select the reverse mode. 4. Press [* REC PAUSE]. 5. Press [w ] or [ q]. B 1 2 OPEN/CLOSE DOLBY NR 3 REV MODE NR NR COUNTER A 1 2 3 C Side A Tab for side “B” Tab for side “A” Normal tape Hi-position tape Detection hole To re-record

Preparation: Do the preparatory steps (a page 19). 1 Tune to the required station. (a page 12 or 13) 2 Press [* REC PAUSE]. The deck goes into the recording standby mode, [* REC PAUSE] indicator lights and a play indicator starts flashing. 3 Press [w ] or [ q] to start recording. q : to record on the forward side w : to record on the reverse side To stop recording Press [ g ]. To temporarily stop recording Press [* REC PAUSE]. The deck goes into recording standby mode. Press the [w ] or [ q] button with the flashing indicator to resume recording. Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws. 2 3 g 2 3 REC PAUSE

1 Press [w ] or [ q] and then [ g ] to set the tape direction. q : to record on the forward side w : to record on the reverse side When you select “q”, set the reverse mode to “/”. Now, if a track is cut off at the end of the forward side, it is re-recorded on the reverse side. ¡At the end of the reverse side, recording stops and the current track will be interrupted. 2 Turn [INPUT SELECTOR] to select CD mode. 3 Press [EDIT]. Recording starts and “CD EDIT” scrolls across the display. After edit-recording has finished The cassette deck automatically stops. To stop editing Press [ g ] on the deck or the CD player. “EDIT OUT” is displayed and both sections stop. Editing programmed tracks Program the tracks (a steps 1 and 2, page 18) before step 3. CD editing 1 REC PAUSE 2 3 A B 2 1, 3 g g 1 2 INPUT SELECTOR 3 EDIT 1 Press [w ] or [ q] then [ g ] to set the tape direction. q : to record on the forward side w : to record on the reverse side 2 Press [* REC PAUSE]. The deck goes into the recording standby mode, [* REC PAUSE] indicator lights and the play indicator starts flashing. 3 Press [ q] on the CD player. Recording starts automatically. Four seconds after the CD finishes, the deck goes into the recording standby mode. To stop recording EITHER Press [ g ] on the CD player. The deck goes into the recording standby mode four seconds later. OR Press [ g ] on the deck. Recording stops immediately but the CD continues to play. To record programmed tracks Program tracks before step 2 (a steps 1 and 2, page 18). Preparation: Do the preparatory steps (a page 19). Insert a CD (a page 16). Normal recording A B

This timer starts play of the selected source at the selected time. The example shows settings for preset radio channel 3 to play between 6:30 and 7:40, at –40 dB. Preparation: Turn the unit on, set the time (a page 11), preset radio stations if you want the timer to start playing the radio (a page 13). 1 q Press [CLOCK/TIMER] to select “z PLAY”. w Press [SET] within 10 seconds. 2 q Press [TUNE/TIME ADJUST (2 or 1)] to select the condition required and w press [SET]. Repeat steps q and w to complete items q to r. q Select the start time. w Select the finish time. e Select the source. If you select TUNER Select a preset channel. r Select the volume. The timer is now on standby. The display shows each condition again for 3 seconds each then restores the original display. Confirm the [z PLAY/z REC] indicator lights and that “z PLAY” lights on the display. 3 Press [8] to turn the unit off. The timer starts at the set time with the volume increasing gradually to the set level. To cancel the timer Turn the unit on. Press [z PLAY/z REC] so “z PLAY” goes out. Each time you press the button: The timer function will be canceled, but the settings stay in the memory. z PLAY z REC z PLAY z REC off (no display) CD TUNER TAPE CLOCK z REC z PLAY Original display The play timer 3 1 2 zPLAY/zREC 1 1 2 CLOCK/TIMER SET PLAY 2 1 2 SET TUNE/TIME ADJUST PLAY PLAY PLAY PLAY PLAY 1 2 3 4 PLAY MHz 3 / I

This timer records the radio at the set time. The example shows settings for recording radio channel 3 from 18:30 to 19:30. Preparation: Turn the unit on, set the time (a page 11), preset radio stations (a page 13). 1 q Press [CLOCK/TIMER] to select “z REC”. w Press [SET] within 10 seconds. 2 q Press [TUNE/TIME ADJUST (2 or 1)] to select the condition required and w press [SET]. Repeat steps q and w to complete items q to e. q Select the start time. w Select the finish time. e Select the preset channel. The timer is now on standby. The display shows each condition again for 3 seconds each then restores the original display. Confirm the [z PLAY/z REC] indicator lights and that “z REC” lights on the display. 3 Press [8] to turn the unit off. Recording starts 30 seconds before the set time with the volume muted during the set time. To cancel the timer Turn the unit on. Press [z PLAY/z REC] so “z REC” goes out. Each time you press the button: The timer function will be canceled, but the settings stay in the memory. z PLAY z REC z PLAY z REC off (no display) CLOCK z REC z PLAY Original display The record timer 3 1 2 zPLAY/zREC 1 1 2 CLOCK/TIMER SET REC 2 1 2 SET TUNE/TIME ADJUST 1 2 3 REC REC REC REC MHz 3 / I

Checking the timers Press [CLOCK/TIMER] to select “z PLAY” (or “z REC”). The timer conditions are shown in the following order: Start time / finish time / source / (“z PLAY” only) volume The timers can be checked even if the unit is off. Playing the unit after the timers are set The unit can be used after the timers are set. Make sure the unit is off before the set start time. Turning the timers on and off The timers come on at the set time if the [z PLAY/z REC] indicator is on. Turn them on and off by pressing [z PLAY/z REC] (a pages 22 and 23). If the unit is turned off while a timer is functioning, the finish time setting will not be activated. Note B A The play and record timers Remote control only This timer turns the unit off after a set time. While playing a source Press [SLEEP] to select the time (minutes). Each time you press the button: To cancel the sleep timer Press [SLEEP] to select “SLEEP OFF”. “SLEEP” goes out. To confirm the remaining time (While the timer is functioning) Press [SLEEP]. The remaining time is shown for about five seconds. To change the setting Press [SLEEP] to display the remaining time, then press again to select the required time. The sleep timer is canceled if CD editing is started. Note SLEEP 30 SLEEP 60 SLEEP 90 SLEEP OFF SLEEP 120 The sleep timer C Any of the timers can be used together, but ensure the unit is off before the start time for the record and play timers. Using the timers together z PLAY/z REC A CLOCK/TIMER SLEEP SLEEP PLAY/ REC CLOCK/ TIMER PLAY MODE REPEAT AUTO/MONO CANCEL 1 2 3 4 5 6 ≥10 7 8 9 0 SLEEP C SLEEP B z PLAY/ z REC

1 Turn [INPUT SELECTOR] to select EXT mode. Each time you turn [INPUT SELECTOR]: On the remote control Press [EXT]. 2 Operate the unit. See the unit’s manual for details on operation and connection (a page 8). CD TAPE TUNER EXT Listening to an external source A q Turn [INPUT SELECTOR] to select EXT mode. w Select Dolby NR and reverse mode. e Press [* REC PAUSE]. r Press [w ] or [ q] to start recording. t Start the source to be recorded. See the unit’s manual for details on operation and connection. To stop recording Press [ g ] on the deck. Recording an external source Start recording on the external unit and start playing the CD to be recorded. See the unit’s manual for details on operation and connection (a page 8). Recording CDs onto an external unit Reduce the volume before connection. Avoid listening for prolonged periods of time to prevent hearing damage. Plug type: 3.5 mm stereo. Using headphones (not included) C B 1 A 1 INPUT SELECTOR 2 3 4 g B C

Press [MUTING]. Volume is reduced to minimum. To cancel Press [MUTING] again. (“MUTING OFF” lights up.) To cancel from the unit, turn [VOLUME] to minimum (- - dB), then raise it to the required level. Muting is also canceled when the unit is turned off. Muting the volume C The level can be adjusted between –6 to +6. 1 Press [VGCA] to turn the VGCA off. 2 Press [BASS (e or r)] (bass) or [TREBLE (e or r)] (treble). You cannot adjust the tone while VGCA on. Note To adjust the tone quality B VGCA: Variable Gain Control Amplifier You can achieve a clearer sound by using this feature. Turning the VGCA on and off Press [VGCA]. How this unit’s VGCA works Generally, the rate of noise (N) to sound (S) worsens as you lower the volume on an amplifier. With this unit, however, the VGCA circuit changes the gain between 0 and –6 dB, thereby maintaining the same S/N ratio. This change in gain is then maintained as you continue to lower the volume, allowing you to enjoy a better S/N ratio than if the feature was off. q Structure of the amplifier a Input b Electronic volume control c Variable gain control amplifier d Power amplifier w Changes to the S/N ratio when the volume is lowered (simplified) e Gain variation range f Difference between the S/N ratio when the feature is on and off g Reduction in volume The VGCA circuit A Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap- and-water solution or a weak detergent solution. ¡Never use alcohol, paint thinner or benzine to clean this unit. ¡Before using chemically impregnated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). BASS TREBLE VGCA A BASS TREBLE VGCA VGCA B PLAY MODE REPEAT AUTO/MONO CD TAPE EXT TUNER MUTING VOLUME + – MUTING C MUTING 2 1 1 2 S/N 0 dB –6 dB ON OFF a b c d f g e ON OFF

Wipe the disc. Replace the disc if it is scratched, warped, or nonstandard. !6 Condensation may have formed in the player due to a sudden change in temperature. Wait about an hour for it to clear and try again. The display is wrong or play won’t start. Troubleshooting guide Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer. Reference pages are shown as black circled numbers y. Common Problems No sound. Turn the volume up. The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the unit on. y Sounds unfixed, reversed or come from one speaker only. Cannot adjust the bass or treble. Check the speaker connections. y Turn the VGCA off. @6 Humming heard during play. An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from this unit’s cables. If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s polarity. “ERROR” is displayed. Incorrect operation performed. Read the instructions and try again. “U70” is displayed. Connect the flat cables firmly. If “U70” remains on the display, contact the dealer. “F61” is displayed. There is a problem with the amplifier. Consult your dealer. Listening to the radio Noise is heard. The stereo indicator flickers or doesn’t light. Sound is distorted. Use an outdoor antenna. i A beat sound is heard. Turn the TV off or separate it from the unit. A low hum is heard during AM broadcasts. Separate the antenna from other cables and leads. The correct AM frequency can’t be tuned in. Change the frequency step. Hold [FM/AM] or [AM] down for 10 seconds to change the step to 9 kHz. The cassette deck Poor quality sound. Clean the heads. @6 Check the Dolby NR setting. !4 Recording is not possible. If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !9 The CD player During CD editing (a Page 21) “NO TAPE” is displayed. Load a cassette. !4 “CHANGE TAPE” is displayed. If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !9 The remote control The remote control doesn’t work. Check the batteries are inserted correctly. t Replace the batteries if they are worn. All components are required to service the system. If service is ever necessary, bring the entire system.

TUNER I Pre-amplifier section Input sensitivity/impedance EXT IN 300 mV/15 kΩ I Tuner section FM frequency range 87.50–108.00 MHz (0.05 MHz step) FM antenna terminal 75 Ω unbalance AM frequency range 522–1629 kHz (9 kHz step) 520–1630 kHz (10 kHz step) I Timer section Clock Quartz lock type Function Play timer: everyday Rec timer: everyday Sleep timer: 120 min, 30 min intervals I GENERAL Dimensions (W × H × D) [SC-HD550] 210 × 76.3 × 251 mm [SC-HD350] 206 × 76.3 × 251 mm Mass [SC-HD550] 1.1 kg [SC-HD350] 1.0 kg AMPLIFIER I Amplifier section (Low frequency) Power output DIN 1 kHz, THD 1%, 6 Ω, both channel driven 2 × 11 W RMS 1 kHz, THD 10%, 6 Ω, both channel driven 2 × 15 W Total harmonic distortion Half power, 1 kHz, 6 Ω 0.07% Load impedance 6 Ω I Amplifier section (High frequency) Power output DIN 10 kHz, THD 1%, 6 Ω, both channel driven 2 × 7 W RMS 10 kHz, THD 10%, 6 Ω, both channel driven 2 × 10 W Load impedance 6 Ω I S/N 78 dB Rated power, 2 V input, VGCA ON 98 dB I Headphones Jack type 3.5 mm STEREO Load impedance 16–32 Ω I General Power supply For United Kingdom, Australia and N.Z. AC 230–240 V, 50 Hz For Continental Europe AC 230 V, 50 Hz Power consumption 79 W STANDBY condition 0.9 W Dimensions (W × H × D) 210 × 104.8 × 273 mm Mass 3.3 kg SC-HD550 AMPLIFIER I Amplifier section Power output DIN 1 kHz, THD 1%, 6 Ω, both channel driven 2 × 17 W RMS 1 kHz, THD 10%, 6 Ω, both channel driven 2 × 22 W Total harmonic distortion Half power, 1 kHz, 6 Ω 0.07% Load impedance 6 Ω I S/N 78 dB Rated power, 2 V input, VGCA ON 98 dB I Headphones Jack type 3.5 mm STEREO Load impedance 16–32 Ω I General Power supply For United Kingdom AC 230–240 V, 50 Hz For Continental Europe AC 230 V, 50 Hz Power consumption 73 W STANDBY condition 0.9 W Dimensions (W × H × D) 206 × 104.8 × 273 mm Mass 2.7 kg CD PLAYER Digital output terminal Optical × 1 I Audio section DA converter 1 bit 2 DAC MASH I Format Sampling frequency 44.1 kHz I Pickup Wavelength 780 nm I General Dimensions (W × H × D) [SC-HD550] 210 × 76.3 × 246 mm [SC-HD350] 206 × 76.3 × 246 mm Mass [SC-HD550] 1.3 kg [SC-HD350] 1.2 kg CASSETTE DECK I Audio section Track system 4 track 2 channel STEREO Frequency response (Dolby NR off) TYPE 1 (NORMAL) 30 Hz–16 kHz (DIN) TYPE 2 (HIGH) 30 Hz–16 kHz (DIN) TYPE 4 (METAL) 30 Hz–16 kHz (DIN) S/N (Signal level=max recording level, TYPE 2) NR off 56 dB (A weighted) Dolby B NR 64 dB (A weighted) I Motor Capstan drive DC servo motor Reel table drive DC motor Fast forward and rewind time (C-60) Approx. 90 seconds Wow and flutter 0.1% (WRMS) I General Dimensions (W × H × D) [SC-HD550] 210 × 104.8 × 241 mm [SC-HD350] 206 × 104.8 × 241 mm Mass [SC-HD550] 1.6 kg [SC-HD350] 1.5 kg SC-HD350 SPEAKER SYSTEM Type 2 way, 2 speaker, bass-reflex system Speaker(s) Woofer: 12 cm cone type Tweeter: 2.5 cm semi-dome type Impedance HIGH * 6 Ω LOW * 6 Ω Input power HIGH * 30 W (Music), 15 W (DIN) LOW * 60 W (Music), 30 W (DIN) Output sound pressure level 86 dB/W (1.0 m) Cross over frequency 5 kHz Frequency range 48 Hz–50 kHz (–16 dB) 55 Hz–45 kHz (–10 dB) I General Dimensions (W × H × D) 160 × 334 × 222 mm Mass 3.2 kg * HIGH stands for High Frequency. LOW stands for Low Frequency. SPEAKER SYSTEM Type 2 way, 2 speaker, bass-reflex system Speaker(s) Woofer: 12 cm cone type Tweeter: 6 cm cone type Impedance 6 Ω Input power 60 W (Music), 30 W (DIN) Output sound pressure level 86 dB/W (1.0 m) Cross over frequency 7 kHz Frequency range 48 Hz–25 kHz (–16 dB) 55 Hz–22 kHz (–10 dB) I General Dimensions (W × H × D) 160 × 319 × 217 mm Mass 2.8 kg Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. SC-HD350 SC-HD550 RQT5744-B H1200SG0 Matsushita Electric Industrial Co., Ltd. Osaka 542-8588, Japan En WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE.