Thrane&Thrane CH4656 Technical Manual

the accompanying documentation is disclaimed. The information in this quick guide is furnished for informational use only, is subject to change without notice, may contain errors or inaccuracies, and represents no commitment whatsoever. This agreement is governed by the laws of Denmark. Doc. No.: M4656COM Issue: C/0508

2-1 3 INSTALLATION 3-1 3.1 OUTLINE AND DIMENSIONS 3-1 3.2 MOUNTING POSSIBILITIES 3-1 3.3 INSTALLATION WIRING 3-2 3.4 BLOCK DIAGRAM 3-3 3.5 AC SUPPLY VOLTAGE SETTING 3-4 3.6 CONNECTIONS 3-4 3.7 FLOAT CHARGE VOLTAGE ADJUSTMENT 3-6 4 SCHEMATIC DIAGRAM AND COMPONENT LOCATION 4-1 4.1 POWER SUPPLY UNIT 4-1 5 PARTS LIST 5-1 6 ACCESSORIES INCLUDED 6-1 0048

The Battery Charger is designed with four separately fused output lines to ensure independent supply for connected equipment if battery and Battery Charger is used in an uninterruptible power supply (UPS) configuration. Furthermore the Battery Charger includes the following features: • 115V/230V selectable input. • Encapsulation class IP22. • Galvanic isolated AC alarm output. • Protected Battery monitoring output. • Indication of float charge or main charge. • Charges open or sealed lead-acid batteries. • Easy connection. • Easy access to fuses. • Vertical or horizontal mounting. • IEC 945 approved. 0048

115V, range 88V - 132V or 230V, range 176V - 264V. Manual setting. AC input frequency: 50/60 Hz ± 6% Float charge voltage: Adjustable 26.8V - 28.8V to voltage specified by battery manufacturer. Potentiometer located under cover. Main charge current: 10A continuous. Charger type: Automatic, with float charging. IE characteristic. Battery type: Lead-acid, open or sealed. Nominal battery capacity: 20 - 120 Ah Nominal charging time: 10 hours to 80% capacity, 120 Ah battery. Battery monitoring: Protected output. AC Mains Alarm output: Relay contacts 5-50mA, 10-32V. Closed in alarm condition. Alarm in case of AC supply failure. Protection: The Charger output is current limited and protected against polarity reversal, short circuit, over voltage and over temperature. Operating temperature: - 20° to + 55° C. Dimensions: HxWxD: 110x370x260 mm. Weight: Approx. 5 kg. Compass safe distance: Standard: 1.4 m. Steering: 1.0 m. 0048

Battery Charger 2 TECHNICAL DESCRIPTION 2.1 PRINCIPLE OF OPERATION When charging the Battery Charger is operating as a constant current generator until the battery voltage reaches the voltage level set by the float voltage potentiometer. At this level the Battery Charger is changing state to a constant voltage generator to maintain a constant voltage to the battery. Four DC outputs are connected directly to the battery making it possible to use the Battery Charger and the battery in an uninterruptible power supply (UPS) configuration. If the battery is loaded more than the Battery Charger can supply (>10A) power is taken from the battery discharging it. In periods of less consumption the battery is recharged. TYPICAL CHARGE CURVE Main Charge Float Charge t I max Float Charge Voltage Lower level t U I 37672 0048

0048 37669 4 screws M5 x 12 4 screws M5 x 12 9.2 MOUNTING POSSIBILLITIES 370mm Mounting, 4 holes ø7mm 37670 160mm 260mm 331mm 110mm Cable entry in bottom 350mm 1) 1) 2) 1) 1) Space for air flow min. 200mm 2) Space for cable 250mm

AC alarm Line Neutral Earth 37593 Fuse 230/115V AC input 28V DC fused 10A 28V DC fused 10A 28V DC fused 20A 28V DC fused 10A 230V/8AT F13 115V/15AT F12 BATTERY

3-3 3 Installation Battery Charger 3.4 BLOCK DIAGRAM INPUT RECTIFIER/ FILTER CURRENT TRAFO PUSH-PULL STAGE CURRENT FEEDBACK DRIVER STAGE PWM SLOPE COMP. POWER TRAFO OUTPUT RECTIFIER/ FILTER AUXILLARY SUPPLY OPTO OTP OVP OPTO BATTERY MONITOR 37673 AC ALR VBAT BATTERY AC-ALARM DC 3 DC 2 LIGHT DC 1 REGULATOR 230V AC 115V AC 0048

Before connecting the Charger to the AC mains, be sure that the Charger is set to the correct voltage and that the fuse rating corresponds to the setting used. The voltage setting is selected by changing the fuse located under the front cover. The equipment is normally set to 230V. To select a different voltage insert the appropriate fuse. Take care that the power is switched off before changing the fuse. Fuse setting for 230V Fuse setting for 115V Caution: Incorrect setting of the mains voltage may damage the AC Power Supply assembly. 3.6 CONNECTIONS AC INPUT The AC supply leads are connected to the terminal block as indicated. Screened power supply cable may be used as required by some administrations. The cable is fastened and the screen connected by a cable clamp on the main chassis below the terminal block. Recommended cable type: 3 x 1.5 mm² screened. Setting Voltage range Fuse rating 230V 176 - 264V F13 - 8AT N L X14 X13 X15 37686 230V/8AT F13 115V/15AT F12 F13 RF ground Setting Voltage range Fuse rating 115V 88 - 132V F12 - 15AT N L X14 X13 X15 37725 230V/8AT F13 115V/15AT F12 F12 RF ground Terminal Designation Description X13 N Neutral X14 L Line X15 Protective Earth

X10 BATTERY + Max. cable length to battery 7 metres 11 metres 17 metres Recommended Screened multiwire 2 x 10 mm² 2 x 16 mm² 2 x 25 mm² External fuses 40A 50A 63A OUTPUTS Terminal Designation Description X1 DC 1 + 28V DC or Battery X2 DC 1 - voltage Terminal Designation Description X5 - 1 LIGHT - Emergency Light. X5 - 2 LIGHT + 28V DC or Battery voltage Terminal Designation Description X5 - 3 DC 2 - 28V DC or Battery X5 - 4 DC 2 + voltage Terminal Designation Description X5 - 5 DC 3 - 28V DC or Battery X5 - 6 DC 3 + voltage Terminal Designation Description X4 - 1 VBAT - Protected Battery X4 - 2 VBAT + monitor output. BATTERY The battery is connected to the battery terminals located to the left on the connection area. It is recommended to have fuses at the battery. The cable dimension depends on current consumption and permissible voltage drop in the cable. The table below shows the necessary cable cross section for a voltage drop of 1% at 10A and external fuse ratings. Terminal Designation Description X4 - 3 AC ALR Galvanically isolated AC alarm output. X4 - 4 AC ALR Relay contacts 5 - 50mA, 10 - 32V. Closed in alarm condition. Alarm in case of AC supply failure.

The RF ground terminal is placed to the right on the cable-clamping bar. RF grounding requires special attention. Each equipment should have its own individual low- inductance earth connection. CABLE SCREEN The cable screen of each cable should be connected to the cable-clamping bar. 0048 Terminal Designation Description RF ground Grounding screw for cable lug.

1. Connect a voltmeter to the “- Battery +” terminals X9 and X10 located to the left on the connection area. 2. Connect the mains to the unit. 3. Adjust the potentiometer R48 located between the two aluminium covers (refer to the figure below) until the charge voltage prescribed by the battery manufacturer is read on the voltmeter (range 26.6V DC - 28.8V DC). 4. Disconnect all instruments. 5. Disconnect the mains to the unit. 6. Connect the battery to the “- Battery +” terminals located to the left on the connection area. 7. Connect the mains to the unit. R48 20A - + - + - + 10A 10A 10A 10A 10A DC 1 10A + - 20A 30A + - BATTERY CHARGE X4 X5 X9 X10 X2 X1 FLOAT MAIN AC ALR LIGHT AC ALR VBAT- DC 2 DC 3 VBAT+ N L X14 X13 X15 37726 230V/8AT F13 115V/15AT F12

Battery Charger 4 SCHEMATIC DIAGRAM AND COMPONENT LOCATION 4.1 POWER SUPPLY UNIT SCHEMATIC DIAGRAM This diagram is valid for PCB 36550D 0048

Battery Charger COMPONENT LOCATION Not mounted components; C8, C37, C40, K1, R14, R15, R20, R36, R41, R42, R43, R56, V15, V27, V34 Seen from komponent side with upper side tracks PCB rev. 36550D 0048

Battery Charger 0508 BATTERY CHARGER 36550 T&T A/S 5-6-36550D/4-0-36550D 63655002 POSITION DESCRIPTION MANUFACTURER TYPE PART NO. C1 CAPACITOR CERAMIC 100pF 5% NPO 50VDC KCK RT-HE80 SK CH 101 J 15.136 C2 CAPACITOR CERAMIC 100pF 5% NPO 50VDC KCK RT-HE80 SK CH 101 J 15.136 C3 CAPACITOR CLASS X2 1u0F 20% 275VAC PHILIPS 2222 336 23105(24105) 13.931 C4 CAPACITOR CLASS Y2 22nF 20% 250VAC PHILIPS 2222 336 60223 (61223) 13.908 C5 CAPACITOR MKT 2u2F 20% 400VDC ARCOTRONICS R60 M R 4220 CK M 11.200 C6 CAPACITOR KP 3n3F 5% 1600VDC PHILIPS 2222 376 95332 13.326 C7 CAPACITOR KP 3n3F 5% 1600VDC PHILIPS 2222 376 95332 13.326 C8 Not used C9 CAPACITOR MKP 2n2F 10% 630VDC PHILIPS 2222 375 10222 (12222) 13.403 C10 CAPACITOR ELECTROLYTIC 1m2F 20% 50VDC NICHICON UPL1H122MHH 14.721 C11 CAPACITOR ELECTROLYTIC 1m2F 20% 50VDC NICHICON UPL1H122MHH 14.721 C12 CAPACITOR ELECTROLYTIC 1m2F 20% 50VDC NICHICON UPL1H122MHH 14.721 C13 CAPACITOR CERAMIC 1n0F 10% CL2 500VDC KCK RT-HM60 SK YB 102 K 15.160 C14 CAPACITOR CERAMIC 22pF 5% NP0 50VDC PHILIPS 2252 305 12 229 16.667 C15 CAPACITOR CERAMIC 330pF 5% NP0 50VDC PHILIPS 2252 305 12 331 16.681 C16 CAPACITOR CERAMIC 100pF 5% NPO 50VDC KCK RT-HE80 SK CH 101 J 15.136 C17 CAPACITOR ELECTROLYTIC 1m2F 20% 50VDC NICHICON UPL1H122MHH 14.721 C18 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C19 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C20 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C21 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C22 CAPACITOR CERAMIC 680pF 5% NP0 50VDC PHILIPS 2252 305 12 681 16.685 C23 CAPACITOR MKT 4n7F 10% 63VDC BC Components 2222 370 35472 11.374 C24 CAPACITOR CLASS X2 1u0F 20% 275VAC PHILIPS 2222 336 23105(24105) 13.931 C25 ELECTROLYTIC CAPACITOR 100uF 20% 50VDC ELNA RJJ 50V 101 M H4 T2 14.653 C26 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C27 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C28 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C29 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C30 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C31 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C32 CAPACITOR MKT 10nF 5% 63VDC BC Components 2222 370 36103 11.134 C33 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C34 CAPACITOR CLASS Y2 22nF 20% 250VAC PHILIPS 2222 336 60223 (61223) 13.908 C35 CAPACITOR MKT 100nF 10% 63VDC BC Components 2222 370 75104 (78104) 11.136 C36 CAPACITOR CERAMIC 1n0F 10% CL2 500VDC KCK RT-HM60 SK YB 102 K 15.160 C37 Not used C38 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C39 CAPACITOR ELECTROLYTIC 680uF 20% 200VDC PANASONIC ECEC 2D A 681 C B 14.793 C40 Not used C41 CAPACITOR CERAMIC 1n0F 10% CL2 500VDC KCK RT-HM60 SK YB 102 K 15.160 C42 CAPACITOR CLASS Y2 2n2F 20% 250VAC BC Components 2222 336 63222 (64222) 13.901 C43 CAPACITOR CLASS Y2 2n2F 20% 250VAC BC Components 2222 336 63222 (64222) 13.901 C44 CAPACITOR CERAMIC 1n0F 5% NP0 50VDC PHILIPS 2252 305 12 102 16.687 C45 CAPACITOR CLASS Y2 2n2F 20% 250VAC BC Components 2222 336 63222 (64222) 13.901 C46 CAPACITOR CLASS Y2 2n2F 20% 250VAC BC Components 2222 336 63222 (64222) 13.901 C47 CAPACITOR CLASS Y2 2n2F 20% 250VAC BC Components 2222 336 63222 (64222) 13.901 F1 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F2 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F3 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F4 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F7 ATO BLADE FUSE 30AF COLOURED GREEN LITTELFUSE 257030 45.667 F8 ATO BLADE FUSE 20AF COLOURED YELLOW LITTELFUSE 257020 45.665 F9 ATO BLADE FUSE 20AF COLOURED YELLOW LITTELFUSE 257020 45.665 F10 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F11 ATO BLADE FUSE 10AF RED COLOURED RED LITTELFUSE 257010 45.663 F12 FUSE 15AM Ø6.3x32mm LITTELFUSE 311015 45.630 F13 FUSE 8AT 250V 5x20mm ELU 179 120 8AT 45.519 HS1 Cooling chassis PS4655 / CH4656 / CH4657 T&T A/S 1-2-36892E 236892 HS2 Cooling chassis PS4655 / CH4656 / CH4657 T&T A/S 1-2-36892E 236892 K1 Not used K2 RELAY DPDT 24VDC/1ADC MEISEI M4-24H 78000044 L1 Choke fixed toroidal 22uH/25ADC 8% FLUX FT 12300031-1 20.238 L2 CHOKE FIXED 10uH 20%/5ADC SUMIDA RCH-110 100M 74011007 L3 Choke Dual 2x1.8mH/10DAC THAI LIN TL85-100-182 20.056 N2 OPTOCOUPLER IC/IF 63-125% CNY17F-2 SIEMENS CNY17F-2 32.534 N3 PWM Controller, L.Pow. Curr.Mode, UCC3808-1 UNITRODE UCC3808N-1 31.179 N4 OPTO COUPLER CNY17-2 SIEMENS CNY17-2 32.530 R1 RESISTOR NTC 5 OHM 20% 8.5A SIEMENS B57364-S509-M55 07.305 R2 RESISTOR NTC 5 OHM 20% 8.5A SIEMENS B57364-S509-M55 07.305 R3 RESISTOR VDR 385V 10% PHILIPS 2322 594 53816 (03817) 06.507 R4 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R5 RESISTOR MF. 78k7 OHM 1% 0.6W PHILIPS 2322 156 17873 03.242 R6 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R7 RESISTOR MF. 90R9 1% 0.25W PHILIPS 2322 157 19099 (29099) 02.246 5 PARTS LIST

Battery Charger POSITION DESCRIPTION MANUFACTURER TYPE PART NO. R8 RESISTOR MF 6k2 OHM 5% 0.33W PHILIPS 2322 187 73622 02.491 R9 RESISTOR MF. 22k6 1% 0.25W PHILIPS 157 12263 (22263) 02.253 R10 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R11 RESISTOR MF 22 OHM 5% 0.33W PHILIPS 2322 187 73229 02.432 R12 RESISTOR MF 22 OHM 5% 0.33W PHILIPS 2322 187 73229 02.432 R13 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R14 Not used R15 Not used R16 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R17 RESISTOR MF 100 OHM 5% 0.33W PHILIPS 2322 187 73101 02.448 R18 RESISTOR MF. 2k00 1% 0.25W PHILIPS 2322 157 12002 (22002) 02.250 R19 RESISTOR MF 12k OHM 5% 0.33W PHILIPS 2322 187 73123 02.498 R20 Not used R21 RESISTOR PMF 82 OHM 5% 3W PHILIPS 2322 195 13829 04.672 R22 RESISTOR PMF 120k OHM 5% 2W PHILIPS 2322 194 13124 04.236 R23 RESISTOR PMF 120k OHM 5% 2W PHILIPS 2322 194 13124 04.236 R24 RESISTOR MF. 86k6 OHM 1% 0.6W PHILIPS 2322 156 18663 03.244 R25 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R26 RESISTOR MF 2k7 OHM 5% 0.33W PHILIPS 2322 187 73272 02.482 R27 RESISTOR MF 47k OHM 5% 0.33W PHILIPS 2322 187 73473 02.512 R28 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R29 RESISTOR PMF 1k0 OHM 5% 3W PHILIPS 2322 195 13102 04.699 R30 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R31 RESISTOR MF 10 OHM 5% 0.33W PHILIPS 2322 187 73109 02.424 R32 RESISTOR MF 825 OHM 1% 0.25W PHILIPS 2322 157 18251 02.224 R33 RESISTOR MF 2R7 OHM 5% 0.33W PHILIPS 2322 187 73278 02.410 R34 RESISTOR MF 2R7 OHM 5% 0.33W PHILIPS 2322 187 73278 02.410 R35 RESISTOR MF 220k OHM 5% 0.33W PHILIPS 2322 187 73224 02.528 R36 Not used R37 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R38 RESISTOR MF. 22k6 1% 0.25W PHILIPS 2322 157 12263 (22263) 02.253 R39 PLUG 1 POLE F.PCB 4.8X0.8mm RADIO PARTS A/S 136-2141 75000151 R40 RESISTOR PMF 82 OHM 5% 3W PHILIPS 2322 195 13829 04.672 R41 Not used R42 Not used R43 Not used R44 RESISTOR PMF 82 OHM 5% 3W PHILIPS 2322 195 13829 04.672 R45 RESISTOR PMF 82 OHM 5% 3W PHILIPS 2322 195 13829 04.672 R46 RESISTOR MF 470k OHM 5% 0.33W PHILIPS 2322 187 73474 02.536 R47 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R48 PRESET SEALED 470R 20% 0.3W TOCOS GF06P-501-M 58324701 R49 RESISTOR PMF 12 OHM 5% 2W PHILIPS 2322 194 13129 04.136 R50 RESISTOR MF 100 OHM 5% 0.33W PHILIPS 2322 187 73101 02.448 R52 RESISTOR MF. 5R11 1% 0.25W PHILIPS 2322 157 15118 (25118) 02.242 R53 RESISTOR MF 100k OHM 5% 0.33W PHILIPS 2322 187 73104 02.520 R54 RESISTOR MF 10 OHM 5% 0.33W PHILIPS 2322 187 73109 02.424 R55 RESISTOR MF 47k OHM 5% 0.33W PHILIPS 2322 187 73473 02.512 R56 Not used R57 RESISTOR PTC 3.1 OHM 250mA/50V BOURNS MF-R025 72090000 R58 RESISTOR PTC 3.1 OHM 250mA/50V BOURNS MF-R025 72090000 R59 RESISTOR MF 680 OHM 5% 0.33W PHILIPS 2322 187 73681 02.468 R60 RESISTOR MF 1k5 OHM 5% 0.33W PHILIPS 2322 187 73152 02.476 R61 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R62 RESISTOR MF 8k2 OHM 5% 0.33W PHILIPS 2322 187 73822 02.494 R63 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R64 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R65 RESISTOR MF 560 OHM 5% 0.33W PHILIPS 2322 187 73561 02.466 R66 RESISTOR MF 18k OHM 5% 0.33W PHILIPS 2322 187 73183 02.502 R67 RESISTOR MF 1k00 OHM 1% 0.25W PHILIPS 2322 157 11002 02.200 R68 RESISTOR MF. 11R5 1% 0.25W PHILIPS 2322 157 11159 (21159) 02.244 R69 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R70 RESISTOR MF 10 OHM 5% 0.33W PHILIPS 2322 187 73109 02.424 R71 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R72 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R73 RESISTOR MF 10k0 OHM 1% 0.25W PHILIPS 2322 157 11003 02.235 R74 RESISTOR MF 47k OHM 5% 0.33W PHILIPS 2322 187 73473 02.512 R75 RESISTOR PTC 1kO/120centigrade PHILIPS 2322 671 91107 07.104 R76 RESISTOR MF. 5R11 1% 0.25W PHILIPS 2322 157 15118 (25118) 02.242 S2 Rocker Switch w. lamp, 4pol, DPST, 6A/250VAC, PCB Legion Electronic Co LECR9Y2KDFR7FR1 43.056 T1 Transformer Current Sense 1:1:50, 12A FLUX FT 28001201 22.209 T2 Transformer SMPS 370W FLUX 14410040-1 22.215 V1 DIODE SCHOTTKY 30VDC/1A PHILIPS BYV10-30 133(113) 27.611 V2 DIODE BRIDGE 600V/8A KBU8 GENERAL INSTRUM KBU8J(K,M) 27.112 V3 DIODE SCHOTTKY 30VDC/1A PHILIPS BYV10-30 133(113) 27.611 V4 Cooling assembly PR31/50 for STY15NA100, MAX247 T&T A/S 0-0-36759 736759 V5 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V6 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V7 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V8 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V9 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V10 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 0508

Battery Charger POSITION DESCRIPTION MANUFACTURER TYPE PART NO. V11 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V12 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V13 Diode Avalance F.Rec. 1000V/1A BYV96E, MUR1100 PHILIPS BYV96E -153(133) 83100960 V14 Diode Avalance F.Rec. 1000V/1A BYV96E, MUR1100 PHILIPS BYV96E -153(133) 83100960 V15 Not used V16 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V17 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V18 Cooling assembly PR31/50 for STY15NA100, MAX247 T&T A/S 0-0-36759 736759 V19 TRANSISTOR AF BC557B NPN TO-92 MOT. BC557BZL1 28.091 V20 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V21 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V22 TRANSISTOR AF BC557B NPN TO-92 MOT. BC557BZL1 28.091 V23 DIODE SHUNT REGULATOR PROGRAMMABLE MOTOROLA TL431CLP RA 85004310 V24 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V26 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V27 Not used V28 TRANSISTOR AF BC557B NPN TO-92 MOT. BC557BZL1 28.091 V29 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V30 TRANSISTOR AF BC557B NPN TO-92 MOT. BC557BZL1 28.091 V31 TRANSISTOR AF BC557B NPN TO-92 MOT. BC557BZL1 28.091 V32 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V33 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V34 Not used V35 DIODE RECTIFIER 1N4002 100V/1A MOTOROLA 1N4002(03/04/05/06/07)RL 25.100 V36 Cooling assembly PR31/50 for MUR 3020PT, TO218 T&T A/S 0-0-36822 736822 V37 DIODE SHUNT REGULATOR PROGRAMMABLE MOTOROLA TL431CLP RA 85004310 V38 DIODE SHUNT REGULATOR PROGRAMMABLE MOTOROLA TL431CLP RA 85004310 V39 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V40 TRANSISTOR AF BC547B NPN TO-92 PHILIPS BC547B-126 28.067 V41 DIODE LIGHT EMITTING GREEN 4mCd/10mA TEMIC TLHG 4401 AS 12 Z (21Z) 82300014 V42 DIODE LIGHT EMITTING GREEN 4mCd/10mA TEMIC TLHG 4401 AS 12 Z (21Z) 82300014 V43 DIODE 1N4148 HIGH SPEED PHILIPS 1N4148-143 25.131 V44 DIODE SCHOTTKY 30VDC/1A PHILIPS BYV10-30 133(113) 27.611 X1 Connection Element w. 5x10mm Screw and Accessories T&T A/S 0-0-37559 737559 X2 Connection Element w. 5x10mm Screw and Accessories T&T A/S 0-0-37559 737559 X4 TERMINAL BLOCK PCB VERS. 4 POLES 1.5mm² PTR AK 3000/04-5.0-SLADE GREY 81.134 X5 TERMINAL BLOCK PCB VERS. 6 POLES 1.5mm² PTR AK 3000/06-5.0-SLADE GREY 81.136 X9 Connection Element w. 5x10mm Screw and Accessories T&T A/S 0-0-37559 737559 X10 Connection Element w. 5x10mm Screw and Accessories T&T A/S 0-0-37559 737559 X13 TERMINAL BLOCK PCB VERS. 1 POLE 1.5mm² PTR AK 3000/01-5.0-SLADE GREY 81.131 X14 TERMINAL BLOCK PCB VERS. 1 POLE 1.5mm² PTR AK 3000/01-5.0-SLADE GREY 81.131 X15 TERMINAL BLOCK PCB VERS. 1 POLE 1.5mm² PTR AK 3000/01-5.0-SLADE GREY 81.131 XF1 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF2 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF3 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF4 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF7 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF8 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF9 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF10 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF11 FUSE HOLDER 1 POLE ATO BLADE FUSES PUDENZ 178.6165.0001 (.0002) 78.499 XF12 FUSE CLIP 1/4” PCB TYPE LITTELFUSE 102 071 78.389 XF13 FUSECLIP FOR 20x5mm FUSELINK LITTEL FUSE 111501 78.396 XL3 Shield for Choke TL 85 T&T A/S 1-2-36919A 236919 0508

Battery Charger 0048 6 ACCESSORIES INCLUDED DESIGNATION QUANTITY PART NUMBER Fuse 8AT, for 230V 1 45.519 Fuse 15AT, for 115V 2 45.630 Fuse auto blade 10A 2 45.663 Fuse auto blade 20A 2 45.665 Fuse auto blade 30A 1 45.667 Screw M4x30 11 87.363 Screw M4x20 17 87.359 Screw M5x12 5 87.453 Sheet metal screw 5.5x25 5 88.252 Cable clamp, 4 holes 4 204712 Cable clamp, 3 holes 8 204713 Technical Manual 1 M4656COM