Toshiba TDP-P75 Service Manual

pliers Unplug the wire, and cut off the wire tie(A). Then take up Ballast BD. pliers Cut off the wire tie*2 Loosen the screws*1 , take up the mylar. Loosen the screws*2 and take up the frontscrewdriver screwdriver (A) (A) 54/60 08/19/05 ...

G<=3.5 B<=3.5 Slight flare no count R<=2.5 G<=2.5 B<=2.5 Center of screen (Center of screen is defined as center grid when divide screen in to 9 grids) All other area R-G <1/2 <1 G-B <1/2 <1 2.7 Lateral Color Spectrum 450-600 nm R-B <1 <1 3.0 Mechanical Specification 3.1 Dimensions 183 x 245 x 86 mm (L x W x H) (with protrusion part) 3.2 Weight <1991g (without lens cap) 3.3 Security Slot Kensington compatible slot 150N break away force 3.5 Lens Cover Detached Lens Cover 4.0 Packaging 4.1 Outside Dimensions 340 x 365 x 247mm (L x W x H) (TBD) 4.2 Weight <5.0 Kg (Includin ...

� Lamp fail count: Count for lamp fails to ignite and lamp shoot-down abnormally. � Blower fan speed error count: Count for blower stop during normal operation. � DMD fan speed error count: Count for DMD fan stop during normal operation. � Power fan speed error count: Count for power fan stop during normal operation. � DIODE1 ERROR Count: Lamp box sensor fail (sensor open or short). � DIODE2 ERROR Count: Front inlet sensor fail (sensor open or short). � DIODE1 ERROR Count: Not in use. � Lamp box sensor over temperature count: Sensor over 110 degree (Cels ...

5.6. Functional Tests You perform the functional tests after you've repaired the projector to make sure All components of the projector operate properly. You can also perform the functional tests if you're having trouble determining what is wrong with the projector. Required equipment Equipment Notes Video player Make sure the video player has an S-video Out port and cables. The player should also have a Composite video port (RCA). Toshiba strongly suggests you use a DVD player to test the Video quality. DVD players reproduce colors better and project Sharper images. Th ...