Alto GHIBLI 16 Owner's Manual

SPOTLIGHT EQUALIZATION You have three EQ control for each mono and stereo input channel each providing +/-15 dB of boost and cut. The signal will be unaffected when the controls on center position. You may use an external equalizer to make up a mix properly, but a master equalizer will not have effect on a single channel and you may overload the signal easily. Individual EQ will give you a much better control on single tracks. If you turn this control up, you will boost all the frequencies above 12 kHz (shelving filter). You will add transparency to vocals and guitar and al ...

To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to provide a more effective and efficient after-sales warranty service. Please fill out all the information carefully and genuinely, miswriting or absence of this card will void your warranty service. 2. RETURN NOTICE 2.1 In case of return for any warranty service, please ...

your GHIBLI 16(FX): However, we advise you to read carefully the following section to get the best out of your GHIBLI 16(FX). Not paying enough attention to the input signal level, to the routing of the signal and the assignment of the signal will result in unwanted distortion, a corrupted signal or no sound at all. So you should follow these procedures before operation: 1. Before connecting microphones or instruments, make sure that the power of all your systems components including the GHIBLI 16(FX) is ...

These are channels (9/10-11/12) and (13/14-15/16). They are organised in double stereo pair and provided with 1/4" TRS phone sockets. You can connect either mono or stereo line-level instruments or use them as stereo return for external multi-effects. 5 AUX OUT 1 & 2 These 1/4" phone sockets are used to send out the signal from the AUX bus of the input channels into external devices such as effect units and/or stage monitors. You can use AUX OUT 2 to feed powered stage monitors. Use AUX OUT 2 only for internal/external effect since this AUX bus 2 is only post-fad ...

DO NOT OPEN IMPORTANT SAFETY INSTRUCTION TO REDUCE THE RISK OF ELECTRIC SHOCK PLEASE DO NOT REMOVE THE COVER OR THE BACK PANEL OF THIS EQUIPMENT. THERE ARE NO PARTS NEEDED BY USER INSIDE THE EQUIPMENT. FOR SERVICE, PLEASE CONTACT QUALIFIED SERVICE CENTERS. WARNING To reduce the risk of electric shock and fire, do not expose this equipment to moisture or rain. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Dispose of this product should not be placed in municipal waste and should be separate collection. 11. 12. Move this Equipment only with a cart, stand, tripod, or bracket, spec ...

1 2 3 4 5 6 7 8 A B C D 8 7 6 5 4 3 2 1 D C B A MONO INPUT CHANNELS(1-4) 2 1 3 MIC IN +18V 3-BAND EQ 80 600Hz 5KHz 15K - +/-15db PAN PHANTOM LINE IN GAIN POWER LO (FREQ) HI AUX1 AUX2 LEVEL POST PRE MIC GAIN: 0~50dB LINEGAIN: +30dB~-20dB 3c 5e 1a 4d 2b INSERT T R S RN TN MID LOW CUT SW LOW CUT 100HZ LOW CUTSW LOW CUT 100HZ BYPASS COMP SOFTDE-ES MUTE LEFT-BUS RIGHT-BUS AUX-1 AUX-2 CH6/CH8(RIGHT) CH5/CH7(MONO) 3c 5e 1a 4d 2b 3c 5e 1a 4d 2b LEVEL AUX1PRE CH12/CH16 ( LEFT) CH10/CH14 (RIGHT) CH11/CH15 (RIGHT) 3c 5e 1a 4d 2b X1 3c 5e 1a 4d 2b X2 CH9/CH13 (LEFT) R BUS L BUS AUX1PRE ...

MAIN MIX LEVEL BYPASS ON BASS ENHANCER BASS ENHANCER 10 MASTER SECTION 22 INSERT These large rotary knob controls the level of the signal sent to MAIN OUTPUTS and CENTER/SURROUND outputs. All un-muted channel's signals will be sent to this control. 23 PHONES control This control adjusts the signal level sent to the PHONES output socket. You can use it to feed a pair of headphones or powered studio monitors. 24 OUTPUT LEVEL METERs This consists of two column of 4 LEDs each ranging from 20 dB to +10 dB. The 0 (yellow) LED corres ...