Triton JOF001 Operating And Safety Instructions Manual

OPTIONAL TEMPLATE GUIDE KIT • An optional template guide kit is available from your Triton retailer. EXTENDED BASEPLATE AND FENCE • The Extended Baseplate (16) provides greater stability when using bearing-guided cutters along an edge • When using the router with the baseplate fitted, place one hand on the long end of the base, holding it down onto your work, and grip the router handle, furthest away, with your other hand. To fit the extended baseplate 1. Loosen the Baseplate Mounting Knobs (13) sufficiently so that the bolts (on the mou ...

4. Handles 5. Collet 6. Dust Extraction Port 7. Plunge Lock Lever 8. Micro Winder 9. Turret Stops 10. Table-Winder Connection Point 11. Depth Stop Lock Knob 12. Safety Guards 13. Baseplate Mounting Knobs 14. Fence 15. Spanner 16. Extended Baseplate 17. Collet 18. Table Height Winder 19. Pivot Mount 1 3 4 6 13 8 5 11 15 2 7 9 14 10 12 16 17 18 19 925837_Z1MANPRO1.indd 3 13/11/2013 16:46 ...

4. Handles 5. Collet 6. Dust Extraction Port 7. Plunge Lock Lever 8. Micro Winder 9. Turret Stops 10. Table-Winder Connection Point 11. Depth Stop Lock Knob 12. Safety Guards 13. Baseplate Mounting Knobs 14. Fence 15. Spanner 16. Extended Baseplate 17. Collet 18. Table Height Winder 19. Pivot Mount 1 3 4 6 13 8 5 11 15 2 7 9 14 10 12 16 17 18 19 925837_Z1MANPRO1.indd 3 13/11/2013 16:46 ...

Thank you for purchasing this Triton tool. Please read these instructions: they contain information necessary for safe and effective operation of this product. This product has a number of unique features and, even if you are familiar with similar products, reading the instructions will help you get the full benefit of its unique design. Keep these instructions close to hand and ensure all users of this tool have read and fully understand them. CONTENTS Specification 2 Product Familiarisation 3 Symbols 4 General Safety 4 Functions 6 Hand-Held Operation 7 Table-Mou ...

unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. WARNING: When used in Australia or New Zealand, it is recommended that this tool is ALWAYS supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattenti ...

• Before use, check the bit carefully for signs of damage or cracks. Replace damaged or cracked bits immediately • Always use both handles and ensure that you have a firm grip on the router before proceeding with any work • Before using the tool to make a cut, switch on and let it run for a while. Vibration could indicate an improperly installed bit • Take notice of the direction of rotation of the bit and the direction of feed • Keep hands away from the rotating bit • Never start the router while the cutter is touching the workpiece • Ensure the p ...

• Before use, check the bit carefully for signs of damage or cracks. Replace damaged or cracked bits immediately • Always use both handles and ensure that you have a firm grip on the router before proceeding with any work • Before using the tool to make a cut, switch on and let it run for a while. Vibration could indicate an improperly installed bit • Take notice of the direction of rotation of the bit and the direction of feed • Keep hands away from the rotating bit • Never start the router while the cutter is touching the workpiece • Ensure the p ...

4. Handles 5. Collet 6. Dust Extraction Port 7. Plunge Lock Lever 8. Micro Winder 9. Turret Stops 10. Table-Winder Connection Point 11. Depth Stop Lock Knob 12. Safety Guards 13. Baseplate Mounting Knobs 14. Fence 15. Spanner 16. Extended Baseplate 17. Collet 18. Table Height Winder 19. Pivot Mount 1 3 4 6 13 8 5 11 15 2 7 9 14 10 12 16 17 18 19 925837_Z1MANPRO1.indd 3 13/11/2013 16:46 ...