Powerlink PL-APN Quick Installation Manual

www.premiertek.com PoE DC Injector Configuration POE means Power over Ethernet, usually used with Wireless Device. You can use it to integrate the power and the Ethernet then connected with the RJ45 cable. With POE, you can bring the power and Ethernet with long distance as far as the length of RJ45 cable. Since you used PoE DC Injector, the cable line won’t perplex you anymore. Your Access Point & Router are installed conveniently to gain more efficient bandwidth by yourself. Less space and electricity limitation, more comfortable wireless lif ...

www.premiertek.com 3. In LAN Interface Setup, you may change the setting of IP address, DHCP and etc. then press Next>> 4.In WAN Interface Setup, select DHCP Client for your connection of WAN Access Type and press Next>> ...

www.premiertek.com Part II: Internal Web Management AP Model Setup (ADSL) 1、 Install the antenna & power adapter, and then connect the LAN cable with LAN port of this equipment. Another side of cable line connects with network card of computer. Waiting for booting around 20 seconds. 2、 Open the IE ( Internet Explorer) and type 192.168.1.254 on Website to enter the setup frame. If you can’t enter to setup frame, please press Reset button around 10 seconds to restore AP and try to enter again. Select the Setup Wizard on the left side of setup ...

www.premiertek.com Part II: Internal Web Management AP Model Setup (ADSL) 1、 Install the antenna & power adapter, and then connect the LAN cable with LAN port of this equipment. Another side of cable line connects with network card of computer. Waiting for booting around 20 seconds. 2、 Open the IE ( Internet Explorer) and type 192.168.1.254 on Website to enter the setup frame. If you can’t enter to setup frame, please press Reset button around 10 seconds to restore AP and try to enter again. Select the Setup Wizard on the left side of setup ...

www.premiertek.com Part II: Internal Web Management AP Model Setup (ADSL) 1、 Install the antenna & power adapter, and then connect the LAN cable with LAN port of this equipment. Another side of cable line connects with network card of computer. Waiting for booting around 20 seconds. 2、 Open the IE ( Internet Explorer) and type 192.168.1.254 on Website to enter the setup frame. If you can’t enter to setup frame, please press Reset button around 10 seconds to restore AP and try to enter again. Select the Setup Wizard on the left side of setup ...

www.premiertek.com Part II: Internal Web Management AP Model Setup (ADSL) 1、 Install the antenna & power adapter, and then connect the LAN cable with LAN port of this equipment. Another side of cable line connects with network card of computer. Waiting for booting around 20 seconds. 2、 Open the IE ( Internet Explorer) and type 192.168.1.254 on Website to enter the setup frame. If you can’t enter to setup frame, please press Reset button around 10 seconds to restore AP and try to enter again. Select the Setup Wizard on the left side of setup ...

www.premiertek.com 6. Turn on your PC(s) and the cable/ADSL modem. . The front LED indicator ...