American Audio SCD-100 Operating Instructions Manual

PROGRAM BUTTON (6). Pressing the PROGRAM BUT- TON (6) from any function will immediately pause the disc and enter the program mode. 2) After activating the program mode the PROGRAM INDI- CATOR LED (7) will begin to glow indicating Program Mode has been activated. 15. PROGRAM PLAY This operation allows you to customize the order tracks are played back. You may select specific tracks to play and the order they will be played in. You may program a maximum of 30 tracks at once and program a single track to played more tha ...

System: Single Tray Front Loading, Digital Compact Disc Audio Player. Disc type: Standard compact discs (5 in / 12cm and 3in/8cm discs) Dimensions: 3.5” H x 19” W x 13.5” L / 482W x 88.8H x 268D mm Installation: Place on flat surface or mount in flat case Weight: 7 Lbs. / 4 kgs Power supply: AC 115v/ ...

25 1998.01.12 28 27 CLASS 1 LASER KLASSE 1 LASER PRODUCT ELAPSED R E M A I N S I N G L E CONTINU TRACK M S F 29 30 31 32 33 34 35 36 37 38 TRACK M S F COMPACT DIGITAL AUDIO 1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER CO MPACT DISC PLAYER ON OFF 26 A. FRONT CONTROLS (FIGURE 3) 1. TRANSPORT TRAY - This tray is used to load and unload compact disc’s into the drive mecha- nism. The tray is opened and closed by pressing the OPEN/CLOSE BUTTON (2). Never attempt to force the transport tray open or clos ...

PRODUCT INFORMATION LINE VOLTAGE SELECTION • The SCD-100 is designed to operate in either a 120 volts or 220 volts environment. • Before changing the operating voltage voltage be sure main power is disconnect- ed. • The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel (using a flat head screw driver). • Do not force the VOLTAGE SELECTOR switch as this may cause damage • If the VOLTAGE SELECTOR switch does not move smoothly, please contact a quali- ...

indirect reference to the current time mode. 33.TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (30, 31, & 32). As with the TIME METER (30, 31, & 32), this bar is also dependent on the selected time function (REMAIN (37) OR ELAPSE (34 time function (REMAIN (37) OR ELAPSE (34 time function ( ). This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar is a great visual reminder a track is about to end. The flashing bar wil ...

PRODUCT INFORMATION.....................................................................................................................6 CUSTOMER SUPPORT..........................................................................................................................7 SET-UP................................................................................................................................................8 FEATURES................................. ...