D-Link DSL-2750U Quick Installation Manual

INSTALLATION CD INCLUDES SET-UP WIZARD & TECHNICAL MANUALS POWER ADAPTER ADAPTER ETHERNET CABLE (CAT5 UTP) CONNECT THE ROUTER TO YOUR PC DURING SET-UP If any of these items are missing from your packaging contact your reseller WIRELESS N 300 ADSL2+ MODEM ROUTER DSL-2750U SET-UP WIZARD CD The CD contains all of the instructions required to set-up DSL-2750U INSERT CD Insert the CD into the CD drive of your computer. The set-up wizard should start automatically. Make sure that your internet connection is active. (Do not plug in DSL-2750U yet) SET-UP WIZARD Select your language from the list of options and follow the steps within the wizard to complete the set-up of DSL-2750U ADVANCED SET-UP (ACCESS VIA IP ADDRESS) To configure DSL-2750U manually (without the set-up CD) connect your computer to the DSL-2750U using the ethernet cable provided. Then connect the power cable on the DSL-2750U. The power light will display as solid green. Then simply open a browser window and enter the IP address in the browser address field: IP ADDRESS: http://192.168.1.1 USERNAME: admin PASSWORD: admin RJ-11 PHONE CABLE ADSL SPLITTER

1. HOW DO I CONFIGURE MY DSL-2750U ROUTER WITHOUT THE CD, OR CHECK MY WIRELESS NETWORK NAME (SSID) AND WIRELESS ENCRYPTION KEY? - Connect your PC to the router using an Ethernet cable. - Open a web browser and enter the address http://192.168.1.1 - The default username is ‘admin’. The default password is 'admin'. - If you have changed the password and can not remember it, you will need to reset the router to set the password back to 'admin'. 2. HOW DO I RESET MY DSL-2750U ROUTER TO FACTORY DEFAULT SETTINGS? - Ensure the router is powered on. - Press and hold the reset button on the rear of the device for 10 seconds. Note: Resetting the router to factory default will erase the current configuration settings. To re- configure your settings, log into the router as outlined in question 1, then run the Setup Wizard. 3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY? - Every PC that needs to connect to the router wirelessly, you will need to ensure you use the correct Wireless Network Name (SSID) and encryption key. - Use the web based user interface (as described in question 1 above) to check or choose your wireless settings. - Make sure you write down these settings so that you can enter them into each wirelessly connected PC. You will find a dedicated area on the back of this document to record this important information for future use. 4. WHY CAN I NOT GET AN INTERNET CONNECTION? - Please contact your ISP to make sure the service has been enabled/connected by your ISP and that your ISP username and password is correct. NOTES

WIRELESS NETWORK REMINDER Wireless Network Name (SSID) Wireless Network Password