Lancom OAP-54-1 Manual 

LANCOM OAC-54-1 Wireless LANCOM OAP-54-1 Wireless Bridge Kit � Handbuch � Manual . . . c o n n e c t i n g y o u r b u s i n e s s all-guides com

While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software included with this product is subject to written per- mission by LANCOM Systems. We reserve the right to make any alterations that arise as the result of technical develop- ment. All explanations and documents for registration of the products you find in the appendix of this documentation, if they were present at the time of printing. Trademarks Windows®, Windows Vista™, Windows XP® and Microsoft® are registered trademarks of Microsoft, Corp. The LANCOM Systems logo, LCOS and the name LANCOM are registered trademarks of LANCOM Systems GmbH. All other names mentioned may be trademarks or registered trademarks of their respective owners. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http://www.openssl.org/. This product includes cryptographic software written by Eric Young ([email protected]). This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes the LZMA SDK written by Igor Pavlov. Subject to change without notice. No liability for technical errors or omissions. LANCOM Systems GmbH Adenauerstr. 20/B2 52146 Wuerselen Germany www.lancom.eu Wuerselen, Juli 2008 110610/0708

� Preface 3 EN Preface Thank you for placing your trust in this LANCOM Systems product. The LANCOM OAP/OAC-54-1 Wireless are designed to offer high-performance wireless LAN in tough environments. The housing that conforms with IP67 and the facilities for sturdy mounting on walls or poles all make the LANCOM OAP-54-1 Wireless ideally suited for loca- tions where the demands on stability and robustness are at their highest–in temperatures from -30° up to +70°C. With the integrated 54/108 Mbps WLAN module according to IEEE 802.11a/ h or IEEE 802.11b/g the LANCOM OAP-54-1 Wireless work in the 2,4 or 5 GHz frequency range. The modells of the LANCOM OAP/OAC-54-1 Wireless series can be configured in standalone, managed and client mode (LANCOM OAC-54-1 Wireless client mode only). In managed mode, the access point can be securely managed by the LANCOM WLAN Controller. Model variants This documentation is intended for LANCOM OAP/OAC-54-1 Wireless users. The following models are available: � The LANCOM OAP-54-1 Wireless with one integrated WLAN module and one integrated antenna for access point operation or as hot spot with addionional software option. � The LANCOM OAC-54-1 Wireless with one integrated WLAN module and one integrated antenna for client mode operation only. � The LANCOM OAP-54-1 Wireless Bridge Kit comes as bundle with two LANCOM OAP-54-1 Wireless for the quick set up of point to point connec- tions (WLAN bridge).  In the following parts of this documentation the LANCOM OAP-54-1 Wireless Bridge Kit is referenced only, when special features of the bundle are described. In all other cases the descriptions for the LANCOM OAP-54-1 Wireless are valid for the LANCOM OAP-54-1 Wireless Bridge Kit too. Model restrictions Passages applying only to certain models are identified either in the text itself or by a comment in the margin.

� Preface 4 EN Otherwise the documentation refers to all models collectively as the LANCOM OAP/OAC-54-1 Wireless series. Security settings To maximize the security available from your product, we recommend that you undertake all of the security settings (e.g. firewall, encryption, access protec- tion) that were not already activated when you purchased the product. The LANconfig Wizard 'Security Settings' will help you with this task. Further infor- mation is also available in the chapter 'Security settings'. We would additionally like to ask you to refer to our Internet site www.lan- com.eu for the latest information about your product and technical develop- ments, and also to download our latest software versions. User manual and reference manual The documentation of your device consists of the following parts: � Installation guide � User manual � Reference manual You are now reading the user manual. It contains all information you need to put your device into operation. It also contains all of the important technical specifications. The reference manual can be found on the LANCOM product CD as an Acrobat (PDF) document. It is designed as a supplement to the user manual and goes into detail on topics that apply to a variety of models. These include, for example: � The system design of the operating system LCOS � Configuration � Management � Diagnosis � Security � Routing and WAN functions � Firewall � Quality of Service (QoS) � Virtual Private Networks (VPN) � Virtual Local Networks (VLAN) � Wireless networks (WLAN)

� Preface 5 EN � Backup solutions � Further server services (DHCP, DNS, charge management) This documentation was created by … ... several members of our staff from a variety of departments in order to ensure you the best possible support when using your LANCOM product. In case you encounter any errors, or just want to issue critics enhancements, please do not hesitate to send an email directly to: [email protected]  Our online services www.lancom.eu are available to you around the clock should you have any queries regarding the topics discussed in this manual or require any further support. The area 'Support' will help you with many answers to frequently asked questions (FAQs). Furthermore, the knowledgebase offers you a large reserve of infor- mation. The latest drivers, firmware, utilities and documentation are constantly available for download. In addition, LANCOM support is available. For telephone numbers and contact addresses of LANCOM support, please see the enclosed leaf- let or the LANCOM Systems website. Information symbols  Very important instructions. Failure to observe this may result in damage.  Important instruction that should be observed.  Additional information that may be helpful but which is not required. all-guides com

� Content 6 EN Content 1 Introduction 9 1.1 What is a wireless LAN? 9 1.1.1 Modes of operation of wireless LANs and access points 9 1.2 Just what can your LANCOM OAP/OAC-54-1 Wireless do? 10 2 Installation 14 2.1 Package contents 14 2.2 System requirements 15 2.2.1 Configuring the LANCOM devices 15 2.2.2 Operating access points in managed mode 15 2.3 Status displays and interfaces 15 2.3.1 LEDs of LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless 16 2.3.2 Connectors of LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless 17 2.3.3 Mounting and connectiong the LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless 19 2.4 Software installation 25 2.4.1 Starting the software setup 25 2.4.2 Which software should I install? 26 3 Basic configuration 27 3.1 What details are necessary? 27 3.1.1 TCP/IP settings 27 3.1.2 Configuration protection 29 3.2 Instructions for LANconfig 29 3.3 Instructions for WEBconfig 31 3.4 TCP/IP settings to workstation PCs 36

� Content 7 EN 4 Security settings 37 4.1 Security for the Wireless LAN 37 4.1.1 Closed network 37 4.1.2 Access control via MAC address 38 4.1.3 LANCOM Enhanced Passphrase Security 38 4.1.4 Encryption of the data transfer 39 4.1.5 802.1x / EAP 39 4.1.6 IPSec over WLAN 40 4.2 Tips for handling keys 40 4.3 The security settings wizard 40 4.3.1 Wizard for LANconfig 41 4.3.2 Wizard for WEBconfig 42 4.4 The security checklist 42 5 Advanced wireless LAN configuration 45 5.1 WLAN configuration with the wizards in LANconfig 45 5.2 Point-to-point connections 47 5.2.1 Geometric dimensioning of outdoor wireless network links 48 5.2.2 Antenna alignment for P2P operations 52 5.3 Configuration of P2P connections 54 5.3.1 Security for point-to-point connections 56 5.4 Client mode 58 5.4.1 Client settings 59 5.4.2 Set the SSID of the available networks 60 5.4.3 Encryption settings 61 6 Setting up Internet access 63 6.1 The Internet Connection Wizard 64 6.1.1 Instructions for LANconfig 64 6.1.2 Instructions for WEBconfig 65 6.2 The Firewall Wizard 65 6.2.1 LANconfig Wizard 65 6.2.2 Configuration under WEBconfig 66

� Content 8 EN 7 Options and accessories 67 7.1 Optional LANCOM WLAN antennas 67 7.1.1 Antenna Diversity 68 7.1.2 Installation of AirLancer Extender antennas 68 7.2 LANCOM Public Spot Option 69 8 Troubleshooting 71 8.1 No DSL connection is established 71 8.2 DSL data transfer is slow 71 8.3 Unwanted connections under Windows XP 72 9 Appendix 73 9.1 Performance data and specifications 73 9.2 Contact assignment 74 9.2.1 LAN/WAN interface 10/100Base-TX, DSL interface 74 9.2.2 Configuration interface (Outband) 74 9.3 Declaration of conformity 75 10 Index 76

� Chapter 1: Introduction 9 EN 1 Introduction 1.1 What is a wireless LAN?  The following sections describe the functionality of wireless networks in general. You can see from the table 'What your LANCOM can do' further below which functions your device supports. Please refer to the reference manual for further information on this topic. A wireless LAN connects individual end-user devices (PCs and mobile compu- ters) to form a local network (also called – Local Area Network). In contrast to a traditional LAN, communication takes place over a wireless connection and not over network cables. For this reason it is called a Wireless Local Area Network (WLAN). A wireless LAN provides the same functionality as a cable-based network: Access to files, servers, printers etc. as well as the integration of individual work stations into a corporate mail system or access to the Internet. There are obvious advantages to wireless LANs: Notebooks and PCs can be installed where they are needed—problems with missing connections or structural changes are a thing of the past with wireless networks. Apart from that, wireless LANs can also be used for connections over longer distances. Expensive leased lines and the associated construction measures can be saved.  LANCOM Wireless Routers and LANCOM Access Points can be opera- ted either as self-sufficient Access Points with their own configuration (WLAN modules in "Access Point mode“) or as components in a WLAN infrastructure, which is controlled from a central WLAN-Controller ("managed mode"). Please observe the corresponding notices to this in this documentation. 1.1.1 Modes of operation of wireless LANs and access points Wireless LAN technology and access points in wireless LANs are used in the following modes of operation: � Simple, direct connection between terminal devices with an access point (ad-hoc mode) � Extensive wireless LANs, possibly connected to a LAN, with one or more access points (infrastructure network)

� Chapter 1: Introduction 10 EN � Transmission of VPN-encrypted connections with VPN pass through � Establishing access to the Internet � Connecting two LANs over a wireless link (point-to-point mode) � Connecting devices with an Ethernet interface via an access point (client mode) � Extending an existing Ethernet network with a wireless LAN (bridge mode) � Relay function for connecting networks via multiple access points � Central administration using a LANCOM WLAN Controller 1.2 Just what can your LANCOM OAP/OAC-54-1 Wireless do? The following table provides a comparison of the properties and functions of your device. LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless Operating modes Point-to-point mode (six P2P paths can be defined per WLAN interface) ✔ Access point mode ✔ Client mode ✔ ✔ Managed mode for central configuration of WLAN mod- ules by a WLAN Controller ✔ IP router ✔ ✔ Applications Outdoor operation in tough environments with extreme temperature ranges(-30 °C up to +70 °C) ✔ ✔ Internet Access ✔ Stateful Inspection Firewall ✔ DHCP and DNS server (for LAN) ✔ ✔ DHCP and DNS client (for WAN) ✔ N:N mapping for routing networks with the same IP- address ranges ✔ ✔ all-guides com

� Chapter 1: Introduction 11 EN Policy-based routing ✔ ✔ VRRP ✔ ✔ PPPoE Server ✔ ✔ WAN RIP ✔ ✔ Spanning Tree protocol ✔ ✔ Layer 2 QoS tagging ✔ ✔ WLAN Wireless transmission by IEEE 802.11g and IEEE 802.11b ✔ ✔ Wireless transmission by IEEE 802.11a and IEEE 802.11h ✔ ✔ Integrated antenna with antenna gain 13.5 dBi at 2.4 GHz and 15.5 dBi at 5 GHz ✔ ✔ Turbo Modus: Bandbreitenverdopplung im 2,4 GHz- und 5 GHz-Bereich ✔ ✔ Super AG inkl. Hardware-Compression und Bursting ✔ ✔ Multi SSID ✔ Roaming function ✔ Client only 802.11i / WPA with hardware AES encryption ✔ ✔ WEP encryption (up to 128 Bit key length, WEP152) ✔ ✔ IEEE 802.1x/EAP Authenticator and supplicant in client mode ✔ IEEE 802.1x/EAP supplicant only in client mode ✔ MAC address filter (ACL) ✔ Individual passphrases per MAC address (LEPS) ✔ Closed network function ✔ Integrated RADIUS server ✔ VLAN ✔ ✔ LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless

� Chapter 1: Introduction 12 EN Intra-Cell Blocking ✔ WLAN QoS (IEEE 802.11e, WME) ✔ ✔ LAN connection Fast Ethernet LAN port (10/100Base-TX) ✔ ✔ Power-over-Ethernet (PoE) ✔ ✔ DHCP and DNS server ✔ ✔ WAN connection Connection for DSL modem (DSLoL) ✔ ✔ Internet connection (IP-Router) Stateful Inspection Firewall ✔ ✔ Firewall filters (IP addresses, ports) ✔ ✔ IP-Masquerading (NAT, PAT) ✔ ✔ Quality of Service (QoS) ✔ ✔ Power supply Power-over-Ethernet (PoE) according to IEEE 802.3af ✔ ✔ Configuration and firmware Configuration with LANconfig or with web browser, additionally terminal mode for Telnet or other terminal programs, SNMP interface and TFTP server function., SSH connection. ✔ ✔ Setup wizards ✔ ✔ FirmSafe with firmware versions for absolutely secure software upgrades ✔ ✔ Monitoring and management of the WLAN with Rogue AP Detection ✔ Optional software extensions LANCOM Public Spot Option ✔ LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless

� Chapter 1: Introduction 13 EN Optional hardware extensions AirLancer Extender antennas for increased range ✔ ✔ Housing IP66-rated housing for deployment in extreme environ- ments ✔ ✔ LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless

� Chapter 2: Installation 14 EN 2 Installation This chapter will assist you to quickly install hardware and software. First, check the package contents and system requirements. The device can be installed and configured quickly and easily if all prerequisites are fulfilled. 2.1 Package contents Please check the package contents for completeness before starting the installation. In addition to the base station itself, the package should contain the following accessories: If anything is missing, please contact your retailer or the address stated on the delivery slip of the unit. LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless LANCOM OAP-54-1 Wireless Bridge Kit LANCOM OAP-54-1 Wireless 1 2 LANCOM OAC-54-1 Wireless 5 LAN cable for connecting to PoE Injector with waterproof screw connections, 15 m 1 5 2 External 360° dualband antennas with N-plug 2 Mast and wall mount accessories ✔ ✔ ✔ PoE Port Injektor 1 5 2 Power cable for PoE Power Injector 1 5 2 Grounding cable with srews 1 5 2 Terminator for a free antanna connector 1 5 2 Serial configuration cable 1 1 1 Plug for resetting the device via serial interface 1 1 1 Surge protector AirLancer Extender SA-LAN 2 LANCOM CD ✔ ✔ ✔ Printed documentation ✔ ✔ ✔

� Chapter 2: Installation 15 EN 2.2 System requirements 2.2.1 Configuring the LANCOM devices Computers that connect to a LANCOM must meet the following minimum requirements: � Operating system that supports TCP/IP, e.g. Windows Vista™, Windows XP, Windows Millennium Edition (Me), Windows 2000, Win- dows 98, Linux, BSD Unix, Apple Mac OS, OS/2. � Access to the LAN via the TCP/IP protocol. � Wireless LAN adapter or LAN access (if the access point is to be connected to the LAN).  The LANtools also require a Windows operating system. A web brow- ser under any operating system provides access to WEBconfig. 2.2.2 Operating access points in managed mode LANCOM Wireless Routers and LANCOM Access Points can be operated either as self-sufficient Access Points with their own configuration ("Access Point mode“) or as components in a WLAN infrastructure, which is controlled from a central WLAN-Controller ("managed mode"). 2.3 Status displays and interfaces Meanings of the LEDs In the following sections we will use different terms to describe the behaviour of the LEDs: � Blinking means, that the LED is switched on or off at regular intervals in the respective indicated colour. � Flashing means, that the LED lights up very briefly in the respective colour and stay then clearly longer (approximately 10x longer) switched off. � Inverse flashing means the opposite. The LED lights permanently in the respective colour and is only briefly interrupted. � Flickering means, that the LED is switched on and off in irregular inter- vals. all-guides com

� Chapter 2: Installation 16 EN 2.3.1 LEDs of LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless The front panel of the unit feature a series of light emitting diodes (LEDs) that provide information on the status of the device. � Power This LED provides information on the device's operating state. After being switched on, it blinks green during the self-test. The LED then shines con- stantly to indicate operational readiness, unless an error is detected as indi- cated by a code blinked in red.  The power LED blinks alternately in green until a configuration pass- word has been set. Without a configuration password, the configura- tion data in the LANCOM are unprotected. Normally you would set a configuration password during the basic configuration (instructions in the following chapter). Information about setting a configuration password at a later time is available in the section 'The Security Wizard'. � WLAN Link Provides information about the WLAN connections via the internal WLAN module. � � � Off Device switched off Green On (perma- nently) Device operational Red Blinking The device is locked because location verification was not successful

� Chapter 2: Installation 17 EN The following can be displayed for WLAN link: � ETH LAN connector status: 2.3.2 Connectors of LANCOM OAP-54-1 Wireless and LANCOM OAC- 54-1 Wireless The connections and switches of the LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless are located on the bottom side. � Earth cable connector. � Connector for serial configuration cable and reset plug (see 'The reset function'). � Aux connector for external antennas. Diversity antennas are connected to the Aux connector. Off No WLAN network defined or WLAN module deactiva- ted. The WLAN module is not transmitting beacons. Green At least one WLAN network is defined and WLAN module activated. The WLAN module is transmitting beacons. Green Inverse flashing Number of flashes = number of connected WLAN stati- ons and P2P wireless connections, followed by a pause (default). Alternatively, the frequency of the flashed can indicate the input sensitivity. Green Blinking DFS scanning or other scan procedure. Off No networking device attached Green On (perma- nently) Connection to network device operational, not data traffic Green Flickering Data traffic � � � � � �

� Chapter 2: Installation 18 EN � Goretex membrane for compensation of fluctuations in pressure and humidity. � Main connector for external antennas. Additional AirLancer antennas are connected to the Main connectors if necessary. The integrated RF switch automatically changes to the usage of an external antenna. � 10/100Base-Tx for connection to the LAN. Both 10 Mbit or 100 Mbit con- nections are supported. The available transfer rate is detected automati- cally (autosensing). The LAN connection features an automatic MDI/MDIX detector enabling the use of cross-over cables. The LAN connector on the LANCOM OAP/OAC-54-1 Wireless supports Power over Ethernet (PoE). The reset function Via the serial interface the device can either be bootet (restarted) or reset (to the factory settings). Unsrew the fitting of the “COM/Reset” interface at the bottom of the device. Insert the reset plug to the serial interface. Via this plug, two connectors of the interface are bridged, which starts the reset process. Press the reset plug briefly to re-start the device. Pressing the button for 5 seconds or longer restarts the device and resets the configuration to its factory settings. All LEDs on the device light up continuously. Once the switch is released the device will restart with the restored factory settings.  After resetting, the device starts completely unconfigured and all settings are lost. If possible be sure to backup the current device configuration before resetting.  After resetting, the LANCOM Access Point returns to managed mode, in which case the configuration cannot be directly accessed via the WLAN interface!

� Chapter 2: Installation 19 EN 2.3.3 Mounting and connectiong the LANCOM OAP-54-1 Wireless and LANCOM OAC-54-1 Wireless The material from the LANCOM OAP/OAC-54-1 Wireless includes beside the screws, nuts and locking rings the following components: Material � Mounting arm � Connector flange for the Access Point � clamp profile � Screw the Connector flange for the Access Point with the four M5 x 12- screws as well as with the appropriate washers to the rear of the chassis.  Before mounting external antennas, please observe the information on lightning pro- tection in the LANCOM Outdoor Wireless Guide. Mounting antennas without adequate lightning protection could lead to serious damage to the access point and the network infrastructure connected to it. � � �

� Chapter 2: Installation 20 EN Preparationg � Prepare for the mounting bores at the wall. Use for this the mounting arm as a stencil. Screw the mounting arm � with the enclosed screws and dowels at the wall. Wall mounting � Attach the Access Point with the connector flange at the mounting arm. Use for this the M8 x 110-screw with the locking washer, washer and nut. Wall mounting � Place for the pole mounting the clamp profile around the pole. Screw the clamp profile with the M8 x 110-screws at the mounting arm. all-guides com

� Chapter 2: Installation 21 EN Pole mounting � To change the main beam direction of the integrated antennas, you can bend the Access Point up or down with the connector flange opposite the mounting arm. Adjusting of the Access Point Installation of the LANCOM OAP/OAC-54-1 Wireless For the installation of the LANCOM OAP/OAC-54-1 Wireless proceed as fol- lows: � Earth connection - attach the earth cable to the earth screw of the LANCOM OAP/OAC-54-1 Wireless and to a suitable earthed conductor.  When mounting the LANCOM OAP/OAC-54-1 Wireless on poles or walls it may be necessary to earth the housing to avoid dangerous dif- ferences in potential. For grounding the LANCOM OAP/OAC-54-1

� Chapter 2: Installation 22 EN Wireless please observe the information on lightning protection in the attached LANCOM Outdoor Wireless Guide. � Optional: Antenna terminal LANCOM OAP-54-1 Wireless – screw the sup- plied diversity antennas onto the two N connectors on the bottom side of the LANCOM OAP/OAC-54-1 Wireless.  When assembling separately purchased mobile radio antennas please note that the maximum allowed transmission power of the wireless LAN according to EIRP in the country in question may not be exceeded. The system operator is responsible for adhering to the threshold values.  The employment of the AirLancer Extender SA-5L for internal light- ning protection is essential under all circumstances—the AirLancer Extender SA-5L is always mounted between the Access Point and the antenna, preferably as near as possible to the antenna.  Antennas are only to be attached or changed when the device is switched off. Mounting or demounting antennas while the device switched on may cause the destruction of the WLAN module! � LAN—The LAN connector is also used to supply power to the LANCOM OAP/OAC-54-1 Wireless. Plug in the water-proof power cable to the LAN port on the underside of the device and carefully tighten the threaded connector. Connect the other end of the power cable to the 'Power Out' connector on the supplied PoE Injector. � DSLoL – If you want to use your access point in DSLoL mode, you can either connect the device directly to the DSL modem (exclusive mode) or to a hub resp. switch of the cable-bound LAN (automatic mode). � For the exclusive mode insert the included network cable (green plugs) into the LAN connector of the device and the other end into the corresponding interface of the DSL modem. � For the automatic mode for simultaneous operating with LAN and DSLoL insert the included network cable (green plugs) into the LAN connector of the device and the other end into a free network con- necting socket of your local network (resp. into a free socket of a hub/ switch).

� Chapter 2: Installation 23 EN More information about using a LAN interface for DSLoL can be found in the following information box → ’LAN interface: exclusive or in parallel for DSLoL. � PoE—the 'LAN In' connector of the supplied PoE Injector should be con- nected via a normal Ethernet cable to an available network connection socket in your local network (e.g. an available socket on a hub or switch) and the PoE Injector connected with the electricity supply. Information about the installation of PoE can be found in the information box 'Power over Ethernet—elegant power supply over LAN cabling' above. Please observe the information in the documentation supplied with the PoE Injector.  Use only the supplied PoE Injector for the power supply of the LANCOM OAP/OAC-54-1 Wireless. Pay particular care not to connect the PoE Injector to normal Ethernet devices! � Ready for operation? —the Power LED permanently lights up in green as soon as the device receives power. The LEDs subsequently display the operational status. LAN interface: exclusive or in parallel for DSLoL There are two principle DSLoL operation modes available. Either use the exclusive mode when connecting your LANCOM Access Point directly to a DSL modem, or use the automatic mode when connecting the Access Point to a hub or switch of a cable-bound LAN, and connect this hub/switch again to the DSL modem. If the Access Point is broadcasted as gate- way via DHCP, computers in LAN and WLAN can use the internet connection simultaneously via one physical inter- face. Set the desired mode in LANconfig in the Interface settings of the DSLoL interface.  DSLoL supports all PPPoE-based Internet access lines, as well as those that are sup- plied with a access router with multiple fixed IP addresses (such as many SDSL busi- ness lines).

� Chapter 2: Installation 24 EN Power over Ethernet – the elegant power supply via LAN cabling LANCOM Access Points are prepared for the PoE power supply (Power-over-Ethernet), corre- sponding to the 802.3af standard. PoE-enabled network devices can be comfortably supplied with power feeding through the LAN wiring. A separate external power supply for each base station is unnecessary, which reduces the installation complexity considerably. The power feeding into the LAN happens at a central position, either via a PoE power injector, or via a so-called powerhub/powerswitch. For the LAN wiring is to note that all 8 wires must be available by the cabling. PoE feeds the power over those four wires, which are normally not used for data transfer. The PoE supply works only in such network segments, in which exclusively PoE-capable devices are operating. The protection of network devices without PoE support is guaranteed by an intel- ligent mechanism, that tests the network segment for devices without PoE support before start- ing the PoE power feeding. The power is only switched onto the segment, if only devices with PoE support were detected.  In a PoE installation use exclusively devices which correspond to the 802.3af standard! For damages caused by inadmissible devices no warranty may be claimed. Switch PoE - 48 V ACCESS POINT 230 V Power Injector Installation of single devices Installation of several devices PoE Switch 48 V ACCESS POINT ACCESS POINT 230 V Power switch

� Chapter 2: Installation 25 EN 2.4 Software installation The following section describes the installation of the Windows-compatible system software LANtools, as supplied.  You may skip this section if you use your LANCOM OAP/OAC-54-1 Wireless exclusively with computers running operating systems other than Windows. 2.4.1 Starting the software setup Place the product CD into your drive. The setup program will start automati- cally.  If the setup does not start automatically, run AUTORUN.EXE in the root directory of the LANCOM CD. In Setup, select Install software. The following selection menus will appear on screen: all-guides com

� Chapter 2: Installation 26 EN 2.4.2 Which software should I install? � LANconfig is the Windows configuration program for all LANCOM rou- ters and LANCOM access points. WEBconfig can be used alternatively or in addition via a web browser. � With LANmonitor you can use a Windows computer to monitor all of your LANCOM routers and LANCOM access points. � WLANmonitor enables the observation and surveillance of wireless LAN networks. Clients connected to the access points are shown, and even non-authenticated access points and clients can be displayed as well (rogue AP detection and rogue client detection). � With Documentation you copy the documentation files onto your PC. Select the appropriate software options and confirm your choice with Next. The software is installed automatically.

� Chapter 3: Basic configuration 27 EN 3 Basic configuration The basic configuration is conducted with a convenient Setup Wizard that provides step-by-step guidance through the configuration and that requests any necessary information. First of all this chapter presents the information that has to be entered for the basic configuration. This first section will help you to gather up all of the necessary data before you start the Wizard. You subsequently enter this information into the Setup Wizard. Starting the program and the following procedure are described step by step. LANconfig and WEBconfig each have their own description. With all of the necessary information collected in advance, this basic configuration can now take place quickly and in ease. At the end of this chapter we show you the necessary settings for the work- place computers in the LAN so that they can access the device without pro- blem. 3.1 What details are necessary? The Basic Settings Wizard is used to set the LANCOM OAP/OAC-54-1 Wirelesss basic TCP/IP parameters and to protect the device with a configuration pass- word. The following description of the information required by the wizard is divided into the following configuration sections: � TCP/IP settings � Protecting the configuration � Security settings 3.1.1 TCP/IP settings TCP/IP configuration can be performed in two different ways: Either fully auto- matically or manually. No user input is required if TCP/IP configuration is per- formed automatically. All parameters are set by the Setup Wizard on its own. When manual TCP/IP configuration is performed the wizard prompts for the usual TCP/IP parameters: IP address, network mask etc. (more on this later) The fully automatic TCP/IP configuration is only possible in certain network environments. For this reason the Setup Wwizard analyses the connected LAN to see whether fully automatic configuration is possible or not.

� Chapter 3: Basic configuration 28 EN New LAN – fully automatic configuration possible The setup wizard offers to configure TCP/IP fully automatically if no network devices connected have yet been configured. This usually happens in the fol- lowing situations: � Only a single PC is going to be attached to the LANCOM OAP/OAC-54-1 Wireless � Setting up a new network Fully automatic TCP/IP configuration will not be offered if you are integrating the LANCOM OAP/OAC-54-1 Wireless into an existing TCP/IP LAN. In this case please continue with the section 'Required information for manual TCP/IP configuration'. The result of fully automatic TCP/IP configuration is as follows: The LANCOM OAP/OAC-54-1 Wireless is assigned the IP address '172.23.56.254' (network mask '255.255.255.0'). The integrated DHCP server is also activated so that the LANCOM OAP/OAC-54-1 Wireless can assign the devices in the LAN IP addresses automatically. Should you still configure manually? Fully automatic TCP/IP configuration is optional. Instead of this you can select manual configuration. Make this selection after considering the following: � Select automatic configuration if you are not familiar with networks and IP addresses. � Select manual TCP/IP configuration if you are familiar with networks and IP addresses and one of the following statements is true: � You have not yet used any IP addresses in your network but would like to now; You would like to specify the IP address for the router yourself and would like to assign it a user-defined address from one of the address ranges reserved for private use, for example '10.0.0.1' with a network mask of '255.255.255.0'. If you do this you simultaneously specify the address range that the DHCP server will subsequently use for the other devices in the network (provided the DHCP server is acti- vated). � You have so far also used IP addresses on the computers in the LAN. Required information for manual TCP/IP configuration When performing manual TCP/IP configuration the Setup Wwizard prompts you for the following information:

� Chapter 3: Basic configuration 29 EN � DHCP mode of operation � Off: The IP addresses required must be entered manually. � Server: The LANCOM OAP/OAC-54-1 Wireless operates as DHCP server in the network; as a minimum its own IP address and the network mask must be assigned. � Client: The LANCOM OAP/OAC-54-1 Wireless obtains its address infor- mation from another DHCP server; no address information is required. � IP address and network mask for the LANCOM OAP/OAC-54-1 Wireless Assign the LANCOM OAP/OAC-54-1 Wireless a free IP address from your LAN's address range and enter the network mask. � Gateway address Enter the gateway's IP address if you have selected 'Off' as the DHCP mode of operation or if another network device is assuming the role of gateway in the 'Server' mode of operation. � DNS server Enter the IP address of a DNS server to resolve domain names if you have selected 'Off' as the DHCP mode of operation or if another network device is assuming the role of DNS server in the 'Server' mode of operation. 3.1.2 Configuration protection Using a password secures access to the LANCOM OAP/OAC-54-1 Wireless's configuration and thus prevents unauthorized modification. The device's con- figuration contains a great deal of sensitive data such as data for Internet access and should be protected by a password in all cases.  Multiple administrators can be set up in the configuration of the LANCOM, each with differing access rights. Up to 16 different admi- nistrators can be set up for a LANCOM OAP/OAC-54-1 Wireless. Further information can be found in the LCOS reference manual under “Managing rights for different administrators”. 3.2 Instructions for LANconfig � Start up LANconfig by clicking Start � Programs � LANCOM � LANconfig. LANconfig automatically detects the new LANCOM devices in the TCP/IP network.

� Chapter 3: Basic configuration 30 EN � If an unconfigured device is being found during searching, the setup wizard starts that will help you make the basic settings of the device or will even do all the work for you (provided a suitable network environment exists).  If the setup wizard does not start automatically, start a manual search for new devices in the network (Device � Find).  If you cannot access an unconfigured LANCOM, the problem may be due to the netmask of the LAN: with less than 254 possible hosts (net- mask > '255.255.255.0'), please ensure that the IP address 'x.x.x.254' is located in your own subnet. If you have chosen automatic TCP/IP configuration, please continue with Step �. � If you would like to configure the TCP/IP settings manually, assign an avai- lable address from a suitable address range to the LANCOM. Confirm your choice with Next. � Specify whether or not the router should act as a DHCP server. Make your selection and confirm with Next. � In the following window, specify the password for configuration access. Note that the password is case-sensitive and ensure that it is sufficiently long (at least 6 characters). In addition, you may specify whether the device may only be configured from the local network or whether remote configuration via the WAN (i.e. a remote network) is also permissible.  Please note that enabling this will also permit remote configuration via the Internet. You should always make sure that the configuration access is protected with a password. all-guides com

� Chapter 3: Basic configuration 31 EN � Enter the wireless parameters. Select a network name (SSID) and a radio channel. Turn on if necessary the function for ’closed network’. Confirm your choice with Next. � In the next window, select your DSL provider from the list that is displayed. If you select 'My provider is not listed here,' you must enter the transfer protocol used by your DSL provider manually. Confirm your choice with Next. � Connect charge protection can limit the cost of DSL connections to a pre- determined amount if desired. Confirm your choice with Next. � Complete the configuration with Finish.  Section 'TCP/IP settings to workstation PCs' will describe the settings required for the individual workstations in the LAN. 3.3 Instructions for WEBconfig To configure the device with WEBconfig you must know how to address it in the LAN. The reaction of the devices, as well as their accessibility for configu- ration via web browser is dependent on whether a DHCP server and a DNS server are already active in the LAN, and whether these two server processes exchange the assignment of IP addresses to symbolic names within the LAN between each other. After powered on, unconfigured LANCOM devices check first, whether a DHCP server is already active in the LAN. Dependent on the situation, the device is able to switch on its own DHCP server or, alternatively, to activate its DHCP client mode. In this second operating mode, the device itself can obtain an IP address from a DHCP server already existing in the LAN.  If a LANCOM Wireless Router or LANCOM Access Point is centrally managed from a LANCOM WLAN Controller, the DHCP mode is swit- ched from auto-mode to client mode. Network without DHCP server Not for centrally managed LANCOM Wireless Router or LANCOM Access Points In a network without DHCP server, unconfigured LANCOM devices activate their own DHCP server service after starting, and assign appropriate IP addresses and gateway information to the other workstations within the LAN, provided that the workstations are set to obtain their IP address automatically (auto-DHCP). In this constellation, the device can be accessed with any web

� Chapter 3: Basic configuration 32 EN browser from each PC with activated auto-DHCP function through the name LANCOM or by its IP address 172.23.56.254. If the configuration PC does not obtain its IP address from the LANCOM DHCP server, figure out the current IP address of this PC (with Start � Execute � cmd and command ipconfig at the prompt under Windows 2000 or Windows XP, with Start � Execute � cmd and the command winipcfg at the prompt under Windows Me and Windows 9x, or with the command ifconfig on the console under Linux). In this case, the LANCOM is reachable under the IP address x.x.x.254 ( “x” stands for the first three blocks in the IP address of the configuration PC). Network with DHCP server If a DHCP server is active in the LAN to assign IP addresses, an unconfigured LANCOM device will turn off its own DHCP server. It will change into DHCP client mode and will obtain an IP address from the DHCP server of the LAN. This IP address is not known at first. The accessibility of the device depends on the name resolution: � If there is a DNS server for name resolution in the LAN, which interchan- ges the assignment of IP addresses to names with the DHCP server, then the device can be accessed by the name “LANCOM ” (e.g. “LANCOM-00a057xxxxxx”).  The MAC address can be found on a label at the bottom of the device. � If there is no DNS server in the LAN, or it is not linked to the DHCP server, then the device can not be reached by the name. The following options remain in this case: http://LANCOM http://172.23.56.254 http://LANCOM-00a05700094A

� Chapter 3: Basic configuration 33 EN � Figure out the DHCP-assigned IP address of the LANCOM by suitable tools and contact the device directly with this IP address. � Use LANconfig. Starting the wizards in WEBconfig � Start your web browser (e.g. Internet Explorer, Firefox, Opera) and call the LANCOM there: http:// (or with a name as discribed above)  If you cannot access an unconfigured device, the problem may be due to the netmask of the LAN: with less than 254 possible hosts (netmask > '255.255.255.0'), please ensure that the IP address 'x.x.x.254' is located in your own subnet. The WEBconfig main menu will be displayed:

� Chapter 3: Basic configuration 34 EN  The setup wizards are tailored precisely to the functionality of the spe- cific LANCOM model. As a result, your device may offer different wizards than those shown here. If you have chosen automatic TCP/IP configuration, please continue with Step �. � If you would like to configure the TCP/IP settings manually, assign an avai- lable address from a suitable address range to the LANCOM. Also set whether or not it is to operate as a DHCP server. Confirm your entry with Apply.

� Chapter 3: Basic configuration 35 EN � Enter the wireless parameters. Select a network name (SSID) and a radio channel. Turn on if necessary the function for ’closed network’. Confirm your choice with Next. � In the following 'Security settings' window, specify a password for confi- guration access. Note that the password is case-sensitive and ensure that it is sufficiently long (at least 6 characters). You may specify whether the device may only be configured from the local network or whether remote configuration via the WAN (i.e. a remote net- work) is also permissible.  Please note that enabling this will also permit remote configuration via the Internet. You should always make sure that the configuration access is suitably protected, e.g. with a password. � In the next window, select your DSL provider from the list that is displayed. Confirm your choice with Apply. If you select 'My provider is not listed here,' you must enter the transfer protocol used by your DSL provider manually in the next window. Confirm your choice with Apply. � Connect charge protection can limit the cost of DSL connections to a pre- determined amount if desired. Confirm your choice with Apply. � The basic setup wizard reports that all the necessary information has been provided. You can end the wizard with Go on. Entering the password in the web browser When you are prompted for a user name and password by your web browser when accessing the device in the future, enter your personal values to the corresponding fields. Please note that the password is case-sensitive. If you are using the common configuration account, enter the corresponding password only. Leave the user name field blank. Entering the configuration password all-guides com

� Chapter 3: Basic configuration 36 EN 3.4 TCP/IP settings to workstation PCs The correct addressing of all devices within a LAN is extremely important for TCP/IP networks. In addition, all computers must know the IP addresses of two central points in the LAN: � Default gateway – receives all packets that are not addressed to compu- ters within the local network. � DNS server – translates network names (www.lancom.de) or names of computers (www.lancom.de) to actual IP addresses. The LANCOM can perform the functions of both a default gateway and a DNS server. In addition, as a DHCP server it can also automatically assign valid IP addresses to all of the computers in the LAN. The correct TCP/IP configuration of the PCs in the LAN depends on the method used to assign IP addresses within the LAN: � IP address assignment via the LANCOM (default) In this operating mode the LANCOM not only assigns IP addresses to the PCs in the LAN, it also uses DHCP to specify its own IP address as that of the default gateway and DNS server. The PCs must therefore be configu- red so that they automatically obtain their own IP address and the IP addresses of the standard gateway and DNS server (via DHCP). � IP address assignment via a separate DHCP server The workstation PCs must be configured so that they automatically obtain their own IP address and the IP addresses of the standard gateway and DNS server (via DHCP). The IP address of the LANCOM must be stored on the DHCP server so that the DHCP server transmits it to the PCs in the LAN as the standard gateway. In addition, the DHCP server should also specify the LANCOM as a DNS server. � Manual IP address assignment If the IP addresses in the network are assigned static ally, then for each PC the IP address of the LANCOM must be set in the TCP/IP configuration as the standard gateway and as a DNS server.  For further information and help on the TCP/IP settings of your LANCOM, please see the reference manual. For more information on the network configuration of the workstation computers, please refer to the documentation of your operating system.

� Chapter 4: Security settings 37 EN 4 Security settings Your LANCOM device has numerous security functions. You find in this chapter all information needed for an optimal protection of the base station.  You can carry out the configuration of security settings very quickly and conveniently with the Security Wizards in LANconfig and WEBconfig. 4.1 Security for the Wireless LAN Reflecting on Wireless LANs often entails substantial doubts concerning secu- rity. Many people suppose that abuse of data transmitted via radio links is relatively simple. Wireless LAN devices by LANCOM Systems permit the employment of modern security technologies: � Closed network � Access Control (via MAC addresses) � LANCOM Enhanced Passphrase Security � Encryption of data transfer (802.11i/WPA or WEP) � 802.1x / EAP � optional IPSec over WLAN (VPN), in combination with external VPN gate- way 4.1.1 Closed network Each Wireless LAN according to IEEE 802.11 has its own network name (SSID). This network name serves as identification and enables administration of Wireless LANs. A Wireless LAN can be established in such a way that any user gets access to this network. Such networks are called open networks. Any user can access an open network also without knowledge of the WLAN network name reser- ved specifically for this network. Only requirement is the input of the network name 'ANY'. In a closed network the access via 'ANY' is not possible. User have to specify the correct network name. Unknown networks stay hidden to them. Ad-hoc-networks are automatically installed as closed networks and cannot be opened. Infrastructure networks can be run either in open or closed con- dition. You make the settings for this at the respective base station.

� Chapter 4: Security settings 38 EN 4.1.2 Access control via MAC address Each network device has an special identification number. This identification number is the so-called MAC address (Media Access Control), which is world- wide unique per device. The MAC address is programmed into the hardware and cannot be changed. Wireless LAN devices by LANCOM Systems have got a MAC address label on the casing. The access to an infrastructure network can be restricted to known MAC addresses for certain Wireless LAN devices solely. To do so, Access Control lists are available within the LANCOM base stations, in which the granted MAC addresses can be deposited. 4.1.3 LANCOM Enhanced Passphrase Security With LEPS (LANCOM Enhanced Passphrase Security) LANCOM Systems has developed an efficient method which uses the simple configuration of IEEE 802.11i with passphrase and yet which avoids the potential error sources of passphrase sharing. LEPS uses an additional column in the ACL to assign an individual passphrase consisting of any 4 to 64 ASCII characters to each MAC address. The connection to the access point and the subsequent encryption with IEEE 802.11i or WPA is only possible with the right combination of pass- phrase and MAC address. LEPS can be used locally in the device and can also be centrally managed with the help of a RADIUS server, and it works with all WLAN client adapters cur- rently available on the market without modification. Full compatibility to third-party products is assured as LEPS only involves configuration in the access point. An additional security aspect: LEPS can also be used to secure single point- to-point connections (P2P) with an individual passphrase. Even if an access point in a P2P installation is stolen and the passphrase and MAC address become known, all other WLAN connections secured by LEPS remain protec- ted, particularly when the ACL is stored on a RADIUS server.  Guest access with LEPS: LEPS can also be set up to allow access to guests. To this end, all users of the internal WLAN network are given individual passphrases. Guests can make use of their own dedicated SSID and a global passphrase. To avoid abuse, this global passphrase can be changed on a regular basis—every few days, for example.

� Chapter 4: Security settings 39 EN 4.1.4 Encryption of the data transfer A special role comes up to the encryption of data transfer for Wireless LANs. For IEEE 802.11 radio transfer the supplementing encryption standards are 802.11i/WPA and WEP. The function of the encryption is to ensure the security level of cable-bound LANs also in Wireless LANs. � Use encryption on the data transferred in the WLAN. Activate the stron- gest possible encryption available to you ((802.11i with AES, WPA or WEP) and enter the appropriate keys or passphrases into the access point and the WLAN clients. � Regularly change the WEP keys in your access points. The passphrases for 802.11i or WPA do not have to be changed regularly as new keys are generated for each connection anyway. This is not the only reason that the encryption with 802.11i/AES or WPA/TKIP is so much more secure than the now aged WEP method. � If the data is of a high security nature, you can further improve the encryp- tion by additionally authenticating the client with the 802.1x method or activate an additional encryption of the WLAN connection as used for VPN tunnels ('IPSec over WLAN'). In special cases, a combination of these two mechanisms is possible.  Further details to WLAN security and the used encoding methods can be found in the LCOS reference manual. 4.1.5 802.1x / EAP The international industry standard IEEE 802.1x and the Extensible Authenti- cation Protocol (EAP) enables the realization of reliable and secure access controls for base stations. The access data is centrally administered on a RADIUS server then, and can be retrieved by the base station if required. Moreover, this technology makes enables a secured dispatch and a regular automatic change of WEP keys. In this way IEEE 802.1x improves the protec- tion efforts of WEP. In Windows XP the IEEE-802.1x technology is already integrated by default. For other operating systems 802.1x client software is available. The drivers for the LANCOM AirLancer wireless cards already feature an inte- grated 802.1x client.

� Chapter 4: Security settings 40 EN 4.1.6 IPSec over WLAN By means of IPSec over WLAN a radio network can be optimally secured in addition to the already introduced securing mechanisms. In order to run IPSec over WLAN you have to upgrade the base stations of the with the LANCOM VPN option and the LANCOM Advanced VPN Client, which runs under the operating systems Windows VistaTM, Windows 2000 and Windows XP. For other operating systems client software from other manufacturers is available. The drivers for the LANCOM AirLancer wireless adapter are already equipped with a 802.1x client. 4.2 Tips for handling keys The security of encryption procedures can be substantially increased the by paying attention to some important rules for handling keys. � Keep keys as secret as possible. Never note a key. Popular, but completely unsuitable are for example: notebooks, wallets and text files in PCs. Do not share a key unnecessarily. � Select a random key. Use randomized keys of character and number sequences. Keys from the general linguistic usage are insecure. � Change a key immediately in case of suspicion. It is time to change the key of the Wireless LAN if an employee with access to a key leaves your company. The key should also be renewed in case of smallest suspicion of a leak. � LEPS prevents the global spread of passphrases. Activate LEPS to enable the use of individual passphrases. 4.3 The security settings wizard Access to the configuration of a device permits not only to read out critical information (e.g. WEP key, Internet password). Rather, also the entire settings of the security functions (e.g. firewall) can be altered then. So an unauthorized configuration access endangers not only a single device, but the entire net- work. Your LANCOM has a password protection for the configuration access. This protection is already activated during the basic configuration by entering a password. all-guides com

� Chapter 4: Security settings 41 EN The device locks access to its configuration for a specified period of time after a certain number of failed log-in attempts. Both the number of failed attempts and the duration of the lock can be set as needed. By default, access is locked for a period of five minutes after the fifth failed log-in attempt. Besides these general settings you can also check the security settings of the wireless network with the security wizard as far as your device has a WLAN interface. 4.3.1 Wizard for LANconfig � Mark your LANCOM in the selection window. Select from the command bar Extras � Setup Wizard. � Select in the selection menu the setup wizard Control Security Settings and confirm your choice with Next. � Enter your password in the following windows and select the allowed pro- tocols for the configuration access from local and remote networks. � In a next step parameters of the configuration lock like number of failed log-in attempts and the duration of the lock can be adjusted. � Now you can set the security settings for the WLAN. These include the name of the wireless network, the closed network function and the WEP encryption. You can type in the parameters for both wireless networks separately on devices with the option of a second WLAN interface. � Now you specify filter lists for stations (ACL) accessing the WLAN and pro- tocols. Thereby, you restrict data exchange between the wireless network and the local network. � Now activate Stateful Inspection, ping-blocking and Stealth mode in the the firewall configuration.

� Chapter 4: Security settings 42 EN � The wizard will inform you when entries are complete. Complete the con- figuration with Finish. 4.3.2 Wizard for WEBconfig Under WEBconfig you have the possibility to run the wizard Security settings to control and change the settings. The following values are handled: � password for the device � allowed protocols for the configuration access of local and remote net- works � parameters of configuration lock (number of failed log-in attempts and duration of the lock) � security parameters as WLAN name, closed network function, WEP key, ACL list and protocol filters 4.4 The security checklist The following checklists provide an overview of all security settings that are important to professionals. Most of the points in this checklist are uncritical for simple configurations. In these cases, the security settings in the basic configuration or that were set with the Security Wizard are sufficient.  Detailed information about the security settings mentioned here are to be found in the reference manual. � Have you protected the configuration with a password? The simplest way of protecting the configuration is to agree upon a pass- word. If no password has been agreed for the device, the configuration is open to be changed by anybody. The field for entering the password is to be found in LANconfig in the 'Management' configuration area on the 'Security' tab. It is absolutely imperative to assign a password to the con- figuration if you want to enable remote configuration! � Have you permitted remote configuration? If you do not require remote configuration, please ensure to switch it off. If you need to make use of remote configuration, ensure that you do not fail to password-protect the configuration (see the section above). The field for disenabling remote configuration is to be found in LANconfig in the 'Management' configuration area on the 'Security' tab. Under ‘Access rights – From remote networks’ select the option ‘denied’ for all methods of configuration.

� Chapter 4: Security settings 43 EN � Have your password-protected the SNMP configuration? Protect the SNMP configuration with a password too. The field for pass- word-protecting the SNMP configuration is also to be found in LANconfig in the 'Management' configuration area on the 'Security' tab. � Have you activated the firewall? The stateful inspection firewall of LANCOM devices ensures that you local network cannot be attacked from the outside. Activate the firewall in LANconfig under 'Firewall/QoS' on the 'General' tab. � Are you using a 'deny all' firewall strategy? Maximum security and control is initially achieved by denying all data traffic from passing the firewall. The only connections to be accepted by the firewall are those that are to be explicitly permitted. This ensures that Trojan horses and certain types of e-mail virus are denied communication to the outside. Activate the firewall rules in LANconfig under 'Firewall/ QoS' on the 'Rules' tab. Instructions on this are to be found in the refe- rence manual. � Have you activated IP masquerading? IP masquerading refers to the concealment of local computers while they access the Internet. All that is revealed to the Internet is the IP number of the router module of the device. The IP address can be fixed or dynami- cally assigned by the provider. The computers in the LAN then use the rou- ter as a gateway and are not visible themselves. The router separates the Internet from the intranet like a wall. The application of IP masquerading is set in the routing table for every route individually. The routing table can be found in the LANconfig in the configuration area 'IP router' on the 'Routing' tab. � Have you used filters to close critical ports? The firewall filters in LANCOM devices offer filter functions for individual computers or entire networks. It is possible to set up source and destina- tion filters for individual ports or port ranges. Furthermore, filters can be set for individual protocols or any combination of protocols (TCP/UDP/ ICMP). It is especially convenient to set up the filters with the aid of LANconfig. Under 'Firewall/QoS', the 'Rules' tab contains the functions for defining and editing filter rules. � Have you excluded certain stations from accessing the device? A special filter list can be used to limit access to the device's internal func- tions via TCP/IP. The phrase "internal functions" refers to configuration

� Chapter 4: Security settings 44 EN sessions via LANconfig, WEBconfig, Telnet or TFTP. As standard this table contains no entries, meaning that computers with any IP address can use TCP/IP and Telnet or TFTP to commence accessing the device. The first time an IP address is entered with its associated netmask, the filter is activated and only the IP addresses contained in this entry are entitled to make use of internal functions. Further entries can be used to extend the circle of authorized parties. The filter entries can describe individual computers or even entire networks. The access list can be found in the LANconfig in the configuration area 'TCP/IP' on the 'General' tab. � Do you store your saved LANCOM configuration to a safe location? Protect your saved configurations in a location that is safe from unautho- rized access. Otherwise, by way of example, an unauthorized person may load your stored configuration file into another device and they can access the Internet at your expense.

� Chapter 5: Advanced wireless LAN configuration 45 EN 5 Advanced wireless LAN configuration 5.1 WLAN configuration with the wizards in LANconfig Highly convenient installation wizards are available to help you with the con- figuration of LANCOM Access Points for your wireless LAN. The settings include the general shared parameters and also the individual settings for one or more logical wireless LAN networks (WLAN radio cells or SSIDs). � Mark your LANCOM Access Point in the selection window in LANconfig. From the command line, select Extras � Setup Wizard. � In the selection menu, select the Setup Wizard, Configure WLAN inter- face and confirm the selection with Continue. � Make the settings as requested by the wizard and as described as follows. Country settings Regulations for the operation of WLAN cards differ from country to country. The use of some radio channels is prohibited in certain countries. To operate the LANCOM Access Points while observing the regulations in various coun- tries, all physical WLAN interfaces can be set up for the country where they are operated. WLAN module operation The WLAN modules can be operated in various operating modes: � As a base station (Access Point mode), the device makes the link between WLAN clients and the cabled LAN. Parallel to this, point-to-point connec- tions are possible as well. � In Managed Mode the Access Points also accept WLAN clients into the network, although the clients then join a WLAN infrastructure that is con- all-guides com

� Chapter 5: Advanced wireless LAN configuration 46 EN figured by a central WLAN-Controller. In this operating mode, no further WLAN configuration is necessary as all WLAN parameters are provided by the WLAN-Controller. � In client mode, the device itself locates the connection to another Access Point and attempts to register with a wireless network. In this case the device serves, for example, to link a cabled network device to an Access Point over a wireless connection. In this operating mode, parallel point- to-point connections are not possible. For further information please refer to section → Client Mode. Physical WLAN settings Along with the radio channels, the physical WLAN settings can also be used to activate options such as the bundeling of WLAN packets (TX Burst), hard- ware compression, or the use of QoS compliant with 802.11e. You also control the settings for the diversity behavior here. Logical WLAN networks Each WLAN module can support up to eight logical WLAN networks for mobile WLAN clients to register with. The following parameters have to be set when configuring a logical WLAN network: � The network name (SSID) � Open or closed radio LAN � Encryption settings � MAC filter � Client-bridge operation � Filter settings Point-to-point settings The configuration of P2P connections involves setting not only the operating mode but also the station name that the Access Point can connect to. Also, the role as "Master" or "Slave" is set here. Along with the settings for the Access Point itself, also to be defined is the remote site that the Access Point can contact via the P2P connection. For further information please refer to section → Point-to-point connections.

� Chapter 5: Advanced wireless LAN configuration 47 EN 5.2 Point-to-point connections LANCOM Access Points can serve not only as central stations in a wireless net- work, they can also operate in point-to-point mode to bridge longer dis- tances. For example, they can provide a secure connection between two networks that are several kilometers apart — without direct cabling or expen- sive leased lines. The behavior of an access point when exchanging data with other access points is defined in the "Point-to-point operation mode". � Off: The access point only communicates with mobile clients � To: The access point can communicate with other access points and with mobile clients � Exclusive: The access point only communicates with other base stations In the 5 -GHz band, the automatic search for vacant WLAN channels can lead to several simultaneous test transmissions from multiple access points, with the result that they do not find each other. This stalemate situation can be avoided with the appropriate "Channel selection scheme": � Master: This access point takes over the leadership when selecting a free WLAN channel. � Slave: All other access points will search for a channel until they have found a transmitting Master. WLAN Router ANTENNA BUILDING ACCESS POINT ANTENNA BUILDING ACCESS POINT ANTENNA BUILDING

� Chapter 5: Advanced wireless LAN configuration 48 EN Thus it is recommended for the 5 GHz band that one central access point should be configured as 'Master' and all other point-to-point partners should be configured as 'Slave'. In the 2.4 GHz band, too, this setting simplifies the establishment of point-to-point connections if the automatic channel search is activated.  It is imperative that the channel selection scheme is configured cor- rectly if the point-to-point connections are to be encrypted with 802.11i/WPA. 5.2.1 Geometric dimensioning of outdoor wireless network links The following basic questions must be answered when designing wireless links: � What antennas must be used for the desired application? � How must the antennas be positioned to ensure a problem-free connec- tion? � What performance characteristics do the antennas need to ensure suffi- cient data throughput within the legal limits? Selection of antennas using the LANCOM Antenna Calculator You can use the LANCOM Antenna Calculator to calculate the output power of the access points as well as the achievable distances and data rates. The program can be downloaded from our website at www.lancom.eu. After selecting your components (access points, antennas, lightning protec- tion and cable) the calculator works out the data rates, ranges, and the antenna gain settings that have to be entered into the access point. MASTER ANTENNE SLAVE ANTENNE SLAVE ANTENNE

� Chapter 5: Advanced wireless LAN configuration 49 EN  Please note that when using 5 GHz antennas additional technologies such as dynamic frequency selection (DFS) may be stipulated depen- ding on the country of use. The operator of the wireless LAN system is responsible for ensuring that local regulations are met. Positioning the antennas Antennas do not broadcast their signals linearly, but within an angle that depends on the model in question. The spherical expansion of the signal waves results in amplification of or interference to the effective power output

� Chapter 5: Advanced wireless LAN configuration 50 EN at certain intervals of the connection between the transmitter and receiver. The areas where the waves amplify or cancel themselves out are known as Fresnel zones. The Fresnel zone 1 must remain free from obstruction in order to ensure that the maximum level of output from the transmitting antenna reaches the recei- ving antenna. Any obstructing element protruding into this zone will signifi- cantly impair the effective signal power. The object not only screens off a portion of the Fresnel zone, but the resulting reflections also lead to a signifi- cant reduction in signal reception. The radius (R) of Fresnel zone 1 is calculated with the following formula assu- ming that the signal wavelength (λ) and the distance between transmitter and receiver (d) are known. R = 0.5 * √ (λ * d) The wavelength in the 2.4 GHz band is approx. 0.125 m, in the 5 GHz band approx. 0.05 m. Example: With a separating distance of 4 km between the two antennae, the radius of Fresnel zone 1 in the 2.4-GHz band is 11 m, in the 5-GHz band 7 m. To ensure that the Fresnel zone 1 remains unobstructed, the height of the antennas must exceed that of the highest obstruction by this radius. The full height of the antenna mast (M) should be as depicted: WLAN Router ANTENNA ADMINISTRATION ACCESS POINT ANTENNA PRODUCTION OBSTRUCTION Fresnel zone 1 Fresnel zone 2 Fresnel zone 3 Radius R Distance d all-guides com

� Chapter 5: Advanced wireless LAN configuration 51 EN M = R + 1m + H + E (earth's curvature) The allowance for the curvature of the earth (E) can be calculated at a distance (d) as E = d² * 0.0147 – i.e. at a distance of 8 km this is almost 1m Example: With a distance of 8 km between the antennae, the result in the 2.4-GHz band is a mast height above the level of the highest obstruction of approx. 13 m, in the 5-GHz band 9 m. Antenna power The power of the antennas must be high enough to ensure acceptable data transfer rates. On the other hand, the country-specific legal regulations regar- ding maximum transmission power should not be exceeded. The calculation of effective power considers everything from the radio module in the transmitting access point to the radio module in the receiving access point. In between there are attenuating elements such as the cable, plug con- nections or simply the air transmitting the signals and amplifying elements such as the external antennas. WLAN Router ANTENNA ADMINISTRATION WLAN Router ANTENNA PRODUCTION OBSTRUCTION Fresnel zone 1 Radius R Safety: 1m Obstruction height H Earth's curvature E

� Chapter 5: Advanced wireless LAN configuration 52 EN 5.2.2 Antenna alignment for P2P operations The precise alignment of the antennas is of considerable importance in esta- blishing P2P connections. The more central the receiving antenna is located in the "ideal line" of the transmitting antenna, the better are the actual per- formance and the effective bandwidth �. If the receiving antenna is outside of this ideal area, however, significant losses in performance will be the result �.  You can find further information on the geometrical design of wireless paths and the alignment of antennas with the help of LANCOM soft- ware in the LCOSreference manual. The current signal quality over a P2P connection can be displayed on the device's LEDs or in the LANmonitor in order to help find the best possible alignment for the antennas. WLAN Router ANTENNA ADMINISTRATION ACCESS POINT ANTENNA PRODUCTION SA-5L SA-5L Free-space loss Amplification with antenna gain Output power of the radio module Loss through cable, plugs and lightning protec- tion Amplification with antenna gain Input signal at the radio module Loss through cable, plugs and lightning protec- tion WLAN Router ANTENNE VERWALTUNG ACCESS POINT ANTENNE PRODUKTION ANTENNE � �

� Chapter 5: Advanced wireless LAN configuration 53 EN The display of signal quality on the LEDs must be activated for the wireless LAN interface (LANconfig: Wireless LAN � General � Physical WLAN settings � Operation). The faster the LED blinks the better the connection (a blinking frequency of 1 Hz represents a signal quality of 10 dB, double the frequency indicates that the signal strength is twice as high). In LANmonitor the connection quality display is opened with the context menu. Right-clicking with the mouse on 'Point-to-point' activates the option 'Adjusting Point-to-Point WLAN Antennas...'  The 'Point-to-point' entry is only visible in the LANmonitor if the monitored device has at least one base station defined as a remote station for a P2P connection (LANconfig: Wireless LAN � General � Physical WLAN settings � Point-to-Point). In the dialog for setting up point-to-point connections, LANmonitor prompts for the information required to establish the P2P connection: � Is the P2P connection configured at both ends (remote base station defi- ned with MAC address or station name)? � Is the point-to-point mode of operation activated? � Which access point is to be monitored? All of the base stations defined as P2P remote stations in the device concerned can be selected here.

� Chapter 5: Advanced wireless LAN configuration 54 EN � Are both antennas approximately aligned? The basic P2P connection has to be working before fine-tuning can be performed with the aid of LANmonitor. Once signal monitoring has commenced, the P2P dialog displays the absolute values for the current signal strength and the maximum value since starting the measurement. The development of the signal strength over time and the maximum value are displayed in a diagram, too. Initially only one of the two antennas should be adjusted until a maximum value is achieved. This first antenna is then fixed and the second antenna is then adjusted to attain the best signal quality. 5.3 Configuration of P2P connections In the configuration of point-to-point connections, entries have to be made for the point-to-point operation mode, the channel selection scheme and the MAC addresses of the remote sites. Configuration with LANconfig For configuration with LANconfig you will find the settings for P2P connec- tions under the configuration area 'Interfaces' on the 'Wireless LAN' tab.  The configuration of the P2P connections can also be carried out with the WLAN Wizards in LANconfig. � Click on the button Physical WLAN settings to open the corresponding WLAN interface and select the tab for 'Point-to-Point'. � Activate the suitable point-to-point operation mode here and set the channel selection scheme to either 'Master' or 'Slave'. If the peers of the

� Chapter 5: Advanced wireless LAN configuration 55 EN P2P connections are to be identified via their station names, then enter a unique name for this WLAN station.  For models with multiple WLAN modules, the station name can be entered separately for each physical WLAN interface. � Close the physical WLAN settings and open the list of Point-to-point partners. For each of the maximum of six P2P connections, enter either the MAC address of the WLAN card at the remote station or enter the WLAN station's name (depending on the chosen method of identifica- tion).  Please observe that only the MAC addresses of the WLAN cards at the other end of the connections are to be entered here! Not the access point's own MAC address, and not the MAC addresses from any other interfaces that may be present in the access points. all-guides com

� Chapter 5: Advanced wireless LAN configuration 56 EN You will find the WLAN MAC address on a sticker located under each of the antenna connectors. Only use the string that is marked as the "WLAN MAC" or "MAC-ID". The other addresses that may be found are not the WLAN MAC address but the LAN MAC address. Alternatively you will find the MAC addresses for the WLAN cards in the devices under WEBconfig, Telnet or a terminal program under the following paths: Configuration with WEBconfig or Telnet Under WEBconfig or Telnet you can set the settings for the point-to-point connections under the following paths: 5.3.1 Security for point-to-point connections IEEE 802.11i can be used to attain a significant increase in the security of WLAN point-to-point connections. All of the advantages of 802.11i such as the simple configuration and the powerful encryption with AES are thus avai- lable for P2P mode, as are the improved security of the passphrase from the LANCOM Enhance Passphrase Security (LEPS). Encryption with 802.11i/WPA To activate the 802.11i encryption for a correctly configured P2P connection, adjust the settings for the first logical WLAN network in the appropriate WLAN interface (i.e. WLAN-1 if you are using the first WLAN card for the P2P Configuration tool Menu/Table WEBconfig Expert configuration � Status � WLAN-statistics � Inter- face-statistics Terminal/Telnet Status/WLAN-statistics/Interface-statistics Configuration tool Menu/Table WEBconfig Expert configuration � Setup � Interfaces � WLAN-Inter- faces� Interpoint-Settings Terminal/Telnet cd /Setup/Interfaces/WLAN-Interfaces/ Interpoint-Settings

� Chapter 5: Advanced wireless LAN configuration 57 EN connection, WLAN-2 if you are using the second card, e.g. as with an access point with two WLAN modules). � Activate the 802.11i encryption. � Select the method '802.11i (WPA)-PSK'. � Enter the passphrase to be used.  The passphrases should consist of a random string at least 22 charac- ters long, corresponding to a cryptographic strength of 128 bits. When set as P2P Master, the passphrase entered here will be used to check the Slave's authorization to access. When set as P2P Slave, the access point transfers this information to register with the remote site. Configuration with LANconfig For configuration with LANconfig you will find the encryption settings under the configuration area 'Wireless LAN' on the '802.11i/WEP' tab. Configuration with WEBconfig or Telnet The encryption settings for the individual logical WLAN networks can be found under WEBconfig or Telnet under the following paths: Configuration tool Menu/Table WEBconfig Expert configuration � Setup � Interfaces � WLAN-Inter- faces� Encryption-Settings Terminal/Telnet /Setup/Interfaces/WLAN-Interfaces/Encryption-Set- tings

� Chapter 5: Advanced wireless LAN configuration 58 EN LEPS for P2P connections A further gain in security can be attained by additionally using LANCOM Enhanced Passphrase Security (LEPS) which involves the matching of MAC address and passphrase. LEPS can be used to secure single point-to-point (P2P) connections with an individual passphrase. Even if an access point in a P2P installation is stolen and the passphrase and MAC address become known, all other WLAN con- nections secured by LEPS remain secure. When using LANconfig for the configuration, you enter the passphrases of the stations approved for the WLAN in the configuration area 'Wireless LAN' on the 'Stations' tab under the button Stations. Configuration with WEBconfig or Telnet The access list for the matching of MAC addresses to the passphrases (LEPS) can be found under WEBconfig or Telnet under the following paths: 5.4 Client mode To connect individual devices with an Ethernet interface into a wireless LAN, LANCOM devices with a WLAN module can be switched to "client mode", whereupon they act as conventional wireless LAN adapters and not as access points (AP). The use of client mode therefore allows devices fitted with only an Ethernet interface, such as PCs and printers, to be integrated into a wire- less LAN. Configuration tool Menu/Table WEBconfig Expert configuration � Setup � WLAN-module � Access-list Terminal/Telnet Setup/WLAN-module/Access-list

� Chapter 5: Advanced wireless LAN configuration 59 EN  Multiple WLAN clients can register with a WLAN device in AP mode, which is not the case for a WLAN device in client mode. 5.4.1 Client settings For LANCOM Access Points and LANCOM Wireless Routers in client mode, further settings/client behavior can be configured from the 'Client mode' tab under the settings for the physical interfaces.  The configuration of the client settings can also be carried out with the WLAN Wizards in LANconfig. � To edit the settings for client mode in LANconfig, go to the 'Client mode' tab under the physical WLAN settings for the desired WLAN interface. ACCESS POINT LAPTOP/W-LAN DRUCKER SERVER LAN ACCESS POINT ACCESS POINT PC WLAN device in client mode WLAN device in AP mode WLAN device in client mode

� Chapter 5: Advanced wireless LAN configuration 60 EN � In 'Scan bands', define whether the client station scans just the 2.4 GHz, just the 5 GHz, or all of the available bands to locate an access point. Under WEBconfig or Telnet the settings for client mode can be found under the following paths: 5.4.2 Set the SSID of the available networks In the WLAN clients, the SSIDs of the networks to which the client stations are to connect must be entered. � To enter the SSIDs, change to the 'General' tab under LANconfig in the 'Wireless LAN' configuration area. In the 'Interfaces' section, select the first WLAN interface from the list of logical WLAN settings. � Enable the WLAN network and enter the SSID of the network the client station should log onto. Configuration tool Menu/Table WEBconfig Expert configuration � Setup � Interfaces � WLAN � Client modes Terminal/Telnet Setup/Interfaces/WLAN/ Client modes all-guides com

� Chapter 5: Advanced wireless LAN configuration 61 EN Under WEBconfig or Telnet the network settings for the logical WLAN interfaces can be found under the following paths: 5.4.3 Encryption settings For access to a WLAN, the appropriate encryption methods and key must be set in the client station. � To enter the key, change to the '802.11i/WEP' tab under LANconfig in the 'Wireless LAN' configuration area. From 'WPA / private WEP settings', select the first WLAN interface from the list of logical WLAN settings. � Enable encryption and match the encryption method to the settings for the access point. � In WLAN client operating mode, the LANCOM Access Points and LANCOM Wireless Routers can authenticate themselves to another access point using EAP/802.1X. For this, select the desired client EAP method here. Note that the selected client EAP method must match the settings of the access point that the device is attempting to log onto.  Depending on the EAP method, the appropriate certificates must be stored in the device. Configuration tool Menu/Table WEBconfig Expert configuration � Setup � Interfaces � WLAN � Net- work Terminal/Telnet Setup/Interfaces/WLAN/ Network settings

� Chapter 5: Advanced wireless LAN configuration 62 EN � For TTLS and PEAP - the EAP/TLS root certificate only; the key is ente- red as a combination username:password. � For TLS in addition; the EAP/TLS device certificate including the private key. Under WEBconfig or Telnet the network settings for the logical WLAN interfaces can be found under the following paths: Configuration tool Call WEBconfig, Telnet Expert configuration > Setup > Interfaces > WLAN > Encryp- tion > WLAN 1

� Chapter 6: Setting up Internet access 63 EN 6 Setting up Internet access The LANCOM provides a central point of Internet access for all of the compu- ters in the LAN. The connection to the Internet provider can be established via the WAN connection which is connected to an ADSL or cable modem. Does the Setup Wizard know your Internet provider? The Wizard is preset with access data for the principal Internet providers in your country and offers you a selection list. If you find your Internet provider in this list, then you generally do not have to enter any additional parameters to set up your Internet access. All that is required is the authentication data as supplied to you by your Internet provider. Internet provider unknown If the list in the Setup Wizard does not contain your provider, you will be asked step-by-step for all of the necessary data. This access data will have been sup- plied to you by your Internet provider. Other connection options In addition you can use the Wizard to activate or deactivate additional options (if supported by your Internet provider): � Billing by time or flatrate – select the method by which you are billed by your Internet provider. � In case of billing by time, you can set the LANCOM to cut connections automatically if no data flows for a certain time (the hold time). You can also set up line polling that detects inactive remote stations very quickly and, in such cases, can close the connection before the hold time expires. INTERNET HEADQUARTER SERVER LAN GATEWAY ROUTER

� Chapter 6: Setting up Internet access 64 EN � In case of flatrate billing you can also set up line polling to monitor the function of the remote station. Apart from that you can opt to keep flatrate connections permanently active ("keep-alive"). In case a connection should fail, it is re-estab- lished automatically. 6.1 The Internet Connection Wizard 6.1.1 Instructions for LANconfig � Mark your device in the selection window. From the command line, select Extras � Setup Wizard. � In the selection menu, select the Setup Wizard, Set up Internet connec- tion and confirm the selection with Next. � In the following windows you select your country, your Internet provider if possible, and you enter your access data. � Depending on availability the Wizard provides further options for your Internet connection. � The Wizard will inform you as soon as the entries are complete. Close the configuration with Finish. LANconfig: Fast activation of the Setup Wizards The fastest way of starting the Setup Wizards under LANconfig is to use the command button in the button bar.

� Chapter 6: Setting up Internet access 65 EN 6.1.2 Instructions for WEBconfig � Select the entry Set up Internet connection from the main menu. � In the following windows you select your country, your Internet provider if possible, and you enter your access data. � Depending on availability the Wizard provides further options for your Internet connection. � The wizard will inform you as soon as the entries are complete. Close the configuration with Finish. 6.2 The Firewall Wizard Your LANCOM features a stateful inspection firewall and firewall filter that provides effective protection from the Internet for your LAN. The core concept of the stateful inspection firewall is that the only data transfers that are con- sidered to be valid are those implemented by the protected device itself. All access attepts that were not requested from within the local network are inva- lid. The Firewall Wizard assists you to generate new rules for the firewall quickly and conveniently. More information on your LANCOM's firewall and its configuration are avai- lable in the reference manual. 6.2.1 LANconfig Wizard � Mark your LANCOM in the selection window. From the command line, select Extras � Setup Wizard. � In the selection menu, select the Setup Wizard, Configure firewall and confirm the selection with Continue. all-guides com

� Chapter 6: Setting up Internet access 66 EN � In the windows that follow you select the services/protocols that the rule is to relate to. In the next step you define the source and destination sta- tions that the rule applies to, and the actions that are to be carried out by the rule on a data packet. � Finally the new rule is given a name, it is activated, and you define whe- ther further rules are to be considered when the rule acts on a data packet. � The wizard will inform you as soon as the entries are complete. Close the configuration with Finish. 6.2.2 Configuration under WEBconfig WEBconfig provides the option of checking and altering the parameters for Internet access under Configuration � Firewall / QoS � Rules � Rule table.

� Chapter 7: Options and accessories 67 EN 7 Options and accessories Your LANCOM device has numerous extensibilities and the possibility to use a broad choice of LANCOM accessories. You find in this chapter information about the available accessories and how to use them with your base station. � The range of the base station can be increased by optional antennas of the AirLancer series and can be adapted to special conditions of environs. � With the LANCOM Public Spot Option option it is possible to extend the LANCOM for additional billing and accounting functions in order to upgrade it to a Wireless Public Spot. 7.1 Optional LANCOM WLAN antennas To increase the range of the LANCOM base station or to adapt the base station to special conditions of environs, you can connect LANCOM WLAN antennas at the base station. An overview of suitable antennas can be found on the LANCOM web site under www.lancom.eu.  For help with calculating the correct antenna setup for external LANCOM AirLancer Extender antennas or for antennas of other ven- dors, please refer to www.lancom.eu  When installing external antennas, ensure that you observe the statu- tory limitations of the country in which the WLAN device is being ope- rated. To help with this, you can enter the transmitting power minus the cable loss into the LANCOM configuration. These data enable LCOS to automatically calculate the correct transmitting power for the selected country.  The employment of the AirLancer Extender SA-5L for internal light- ning protection is essential under all circumstances—the AirLancer Extender SA-5L is always mounted between the Access Point and the antenna, preferably as near as possible to the antenna.  Antennas are only to be attached or changed when the device is switched off. Mounting or demounting antennas while the device switched on may cause the destruction of the WLAN module!

� Chapter 7: Options and accessories 68 EN 7.1.1 Antenna Diversity LANCOM OAP-54-1 Wireless only The transmission of radio signals can suffer from significant signal losses because of reflection and scatter, among other reasons. In some areas, the interaction with the reflected radio waves can cause a drop in signal strength, or even cause it to be cancelled out completely. Transmission quality can be improved with so-called "diversity" methods. The principle of diversity methods relies on the fact that a transmitted signal is often received multiple times (generally twice). With appropriate processing, these signals can be re-combined into a single signal. The most common methods are space diversity and polarization diversity. LANCOM Systems supplies a variety of polarization-diversity antennas as accessories for LANCOM Access Points and LANCOM Wireless Routers. These models enable two orthogonally polarized signals to be received with a single antenna. Further information about this technique is available in our "Polari- zation Diversity" techpaper. 7.1.2 Installation of AirLancer Extender antennas Polarization diversity antennas from LANCOM Systems: � AirLancer Extender O-D80g (2.4 GHz band ), item no. 61221 � AirLancer Extender O-D60a (5 GHz band ), item no. 61222 � AirLancer Extender O-D9a (5 GHz), item no. 61224  Before mounting external antennas, please observe the information on lightning protection in the LANCOM Outdoor Wireless Guide (avai- lable as a download from www.lancom.eu). Mounting antennas wit- hout adequate lightning protection could lead to serious damage to the access point and the network infrastructure connected to it. LANCOM OAP-54-1 Wireless The integrated antennas of the LANCOM OAP-54-1 Wireless are best-suited for establishing point-to-point connections. When using the device in access point mode, for getting more antenna gain or to use the diversity function it is recommended to apply external antennas. To install the provided omni-directional antenna or optional AirLancer Exten- der antennas, switch the device off by disconnecting the PoE supply. Carefully unscrew the terminators. Connect the antenna to the appropriate 'Antenna Main' connector. When connecting the external antenna to the Main connec- tor, the internal antenna is automatically deactivated.

� Chapter 7: Options and accessories 69 EN 7.2 LANCOM Public Spot Option Wireless public spots are publicly accessible points, at which users with their own mobile computers can dial wirelessly into a network, usually into the Internet. The Wireless LAN technology is ideally suitable to offer wireless Internet ser- vices to the public at places such as airports, hotels, stations, restaurants or cafés, so-called Public Hot Spots. The LANCOM Public Spot Option is intended for operators of public wireless networks, and unveils additional functions for authentication and billing of public Internet services for the LANCOM, thus enabling a simple set-up and maintenance of public hot spots. The LANCOM Public Spot Option is the optimal solution for public Wireless LANs. Wireless LANs are very suitable for company networks and for wireless With a LANCOM OAP-54-1 Wireless you can additionally use the „Tx diver- sity“ function via the Aux connector. Further information about diversity can be found in the LCOS reference manual. 'Antenna Main' connector for AirLancer antennas 'AUX' connector for diversity antennas  Please note that the operation of a LANCOM OAP/OAC-54-1 Wireless with LANCOM Public Spot Option (sometimes referred as HotSpot) is possibly subject to certain legal regulations. Please inform yourself concerning relevant regulations before installing a LANCOM OAP/OAC-54-1 Wireless. Further information to this topic can be found in our whitepaper „Public Spots - Operators' rights and obligations“, available as download from www.lancom.eu.

� Chapter 7: Options and accessories 70 EN networking at home. But for public access services, there is a lack of mecha- nisms for authentication and billing of single users (AAA - Authentication / Authorisation / Accounting). This lack remedies the LANCOM Systems Open User Authentication (OUA), the main part of the LANCOM Public Spot Option. The OUA procedure realizes the authentication of all wireless clients via user name and password, and checks the authorization of single users via RADIUS. Accounting data (online time and data volume) can be transferred per user and per session to a central RADIUS server. Client PCs need only radio card (e.g. AirLancer), TCP/IP and an Internet browser. Additional software is not needed. Therefore, the public spot option is ideally suitable to install wireless Internet access services in hotels, restaurants, cafés, airports, stations, exhi- bition centres or universities. With the LANCOM Public Spot Option you extend a base station additionally with these functions and upgrade it to a Wireless Public Spot. Mobile user HTTP/ HTTPS Router RADIUS Internet RADIUS- Server Service- Provider Authorisation, Accounting Authentication all-guides com

� Chapter 8: Troubleshooting 71 EN 8 Troubleshooting In this chapter, you will find suggestions and assistance for a few common dif- ficulties. 8.1 No DSL connection is established After start-up the router automatically attempts to connect to the DSL pro- vider. During this process, the LAN-link LED will blink green. If successful, the LED will switch over to steady green. If, however, the connection can't be established, the LAN-link LED will light up red. The reason for this is usually one of the following: Problems with the cabling? Only the cable provided with your device should be used to connect to DSL. This cable must be connected to the Ethernet port of your broadband access device. The LAN link LED must light green indicating the physical connection. Has the correct transfer protocol been selected? The transfer protocol is set along with the basic settings. The basic setup wiz- ard will enter the correct settings for numerous DSL providers automatically. Only if your DSL provider is not listed, you will have to enter manually the pro- tocol being used. In any case, the protocol that your DSL provider supplies you with should definitely work. You can monitor and correct the protocol settings under: 8.2 DSL data transfer is slow The data transfer rate of an broadband (Internet) DSL connection is dependent upon numerous factors, most of which are outside of one's own sphere of influence. Important factors aside from the bandwidth of one's own Internet connection are the Internet connection and current load of the desired target. Numerous other factors involving the Internet itself can also influence the transfer rate. Configuration tool Run command LANconfig Management � Interfaces � Interface settings � WAN Inter- face WEBconfig Expert Configuration � Setup � Interfaces � WAN Interface

� Chapter 8: Troubleshooting 72 EN Increasing the TCP/IP window size under Windows If the actual transfer rate of a DSL connection is significantly below the fastest rate listed by the provider, there are only a few possible causes (apart from the above-mentioned external factors) which may involve one's own equipment. One common problem occurs when large amounts of data are sent and received simultaneously with a Windows PC using an asynchronous connec- tion. This can cause a severe decrease in download speed. The cause of this problem is what is known as the TCP/IP receive window size of the Windows operating system that is set to a value too small for asynchronous connec- tions. Instructions on how to increase the Windows size can be found in the Knowl- edge Base of the support section of the LANCOM web site (www.lancom.eu). 8.3 Unwanted connections under Windows XP Windows XP computers attempt to compare their clocks with a timeserver on the Internet at start-up. This is why when a Windows XP in the WLAN is started, a connection to the Internet is established by the LANCOM. To resolve this issue, you can turn off the automatic time synchronization on the Windows XP computers under Right mouse click on the time of day � Properties � Internet time.

� Chapter 9: Appendix 73 EN 9 Appendix 9.1 Performance data and specifications LANCOM OAP-54-1 Wireless LANCOM OAC-54-1 Wireless Frequency band WLAN module with 2400 - 2483,5 MHz (ISM) or 5150 - 5725 MHz and 5725 - 5850 (UK only) Connections LAN 10/100Base-TX, Autosensing, Auto Node-Hub WLAN 2x N socket with antenna diversity Power supply Via Power over Ethernet only. One PoE Injector supplied. Antennas Two dualband dipole antennas sup- plied. Please respect the restrictions given in your country when setting up an antenna system. For information about calculating the correct antenna setup, please refer to www.lancom.eu Housing 235 mm x 210 mm x 80 mm (W x H x D), 3.4kg, robust metal housing, IP66 water- jet resistant, ready for wall and pole mounting, 3 LEDs for status display Approvals CE compliant according to ETSI EN 300 328, ETSI EN 301 893 Version 1.3.1 (incl. DFS 2), ETSI EN 301 489-1, ETSI EN 301 489-17, EN 60950-1 Regulations Notified in Germany, Belgium, Netherlands, Luxemburg, Austria, Switzerland, United Kingdom, Italy, France, Czechia, Denmark The courrent list of notifications can be found at www.lancom.eu Environment/ Temperature Temperature range –30 °C bis +70 °C at 95 % max. humidity (non condensing) Service Warranty: 3 years Support Via hotline and Internet

� Chapter 9: Appendix 74 EN 9.2 Contact assignment 9.2.1 LAN/WAN interface 10/100Base-TX, DSL interface 8-pin RJ45 socket, corresponding to ISO 8877, EN 60603-7 9.2.2 Configuration interface (Outband) 8-pin mini-DIN socket Connector Pin IAE 1 T+ 2 T- 3 R+ 4 PoE/G 5 PoE/G 6 R- 7 PoE/-48 V 8 PoE/-48 V Connector Pin IAE 1 DSR 2 RI 3 DCD 4 DTR 5 TXD 6 RTS 7 CTS 8 RXD 9 RST (Reset) 10 GND

� Chapter 9: Appendix 75 EN 9.3 Declaration of conformity LANCOM Systems herewith declares that the devices of the type described in this documentation are in agreement with the basic requirements and other relevant regulations of the 1995/5/EC directive. The CE declarations of conformity for your device are available in the appro- priate product area on the LANCOM Systems web site (www.lancom.eu). all-guides com

� Index 76 EN Index Numerics 100-Mbit network 18 802.11i 11, 37, 38, 39 802.1x 11, 37, 39 802.3af- standard 24 A Access point mode 9, 15 ACL 38 Antenna Outdoor 67 Antenna Calculator 48 Antenna power 51 Autosensing 18 C Client mode 58, 59 Closed network 11 Configuration access 30, 35 Configuration file 44 Configuration password 42 Configuration protection 29 Connect charge protection 31, 35 Contact assignment 74 Configutation interface 74 LAN interface 74 Outband 74 D Default gateway 36, 43 DFS 49 DHCP 12, 36 DHCP server 28, 30, 34, 36 DNS 12 DNS server 10, 36 Documentation 14 Download 5 DSL provider 31, 35 transfer protocol 35 DSL connection problems establishing the connection 71 DSL transfer protocol 31 DSLoL 22 Dynamic Frequency Selection 49 Dynamic frequency selection 49 E EAP 11, 37, 39 Encryption methods 61 F Firewall 10, 12, 43 Block stations 43 Firewall filters 65 FirmSafe 12 Firmware 5 Flatrate 63 Fresnel zone 50 I ICMP 43 Information symbols 5 Installation 14 LANtools 25 Internet access 63 Authentication data 63 Flatrate 63 Internet access setup 63 Internet provider 63 Internet-Zugang 10 IP Block ports 43 Filter 43 IP address 28, 29, 44 IP masquerading 12, 43

� Index 77 EN L LAN Connector cable 14 LANCOM Enhanced Passphrase Security 37 LANconfig 26, 29 Starting the Wizards 64 LANmonitor 26 LANtools System requirements 15 LEDs see status displays 16 LEPS 11, 38 M MAC address filter 11 Managed mode 9, 15 mount accessories 14 Multi SSID 11 N NAT – see IP masquerading Netmask 28, 44 Network mask 29 O Optional antennas 67 Options and accessories 67 P P2P 38 Password 29, 30 PAT – see IP masquerading PoE Power Injector 14 Point-to-Point 38 Point-to-point 47 point-to-point 10 Power-over-Ethernet 24 Public Spot Option 69 Q QoS 12 Quality of Service 12 R RADIUS 11 Remote configuration 30, 35 Routing table 43 S Security Wireless LAN 37 Security checklist 42 self-sufficient 9, 15 SNMP Configuration protection 43 Software installation 25 SSID 31, 35, 60 Stateful Inspection Firewall 10 Stateful-inspection firewall 65 Status display ETH 17 WLAN link 17 Statusanzeigen Power 16 Super AG 11 Support 5 System requirements 15 T TCP 43 TCP/IP 15 Settings 27, 30, 34 Settings to PCs in the LAN 36 Windows size 72 TCP/IP configuration Automatic 34 Fully automatic 27, 28 Manual 27, 28 TCP/IP filter 12, 43 Technische Daten 73 Telnet 44 TFTP 44 Transfer protocol 71 Turbo Modus 11

� Index 78 EN U UDP 43 W WEBconfig 31 password 35 System requirements 15 WEP 11 Wireless LANs Operating modes 9 WLAN Bands scanned 60 Client mode 59 WPA 11, 37, 38, 39